All Category

Marker Lights

Other Related Pages

View : Grid List
Filter

Items 1 - 40 of 300

Set Ascending Direction
  1. LED6 Starlight Bus Marker Zero Clear Lens 12 / 24V
    JET INOUE LED6 Starlight Bus Marker Zero Clear Lens 12 / 24V
    Ultra bright LED. The special lens structure illuminates the road surface brightly with vivid diffused light emission. Uses a lens that has passed the light resistance test and is resistant to discoloration. Dustproof and waterproof IP67 acquired! Noise countermeasures have been taken! Supports 2... Read More
    Number of LED (pieces)  Dimensions, H x W (mm)  77×80  Thread Pitch (mm)  About 60  Lens Color  Clear  Operating Voltage  DC10~36V  Types of Light Bulb  LED  Dimension (mm)  Φ88 x height 77 
    Rating:
    100%
    from S$38.99
    Min. 2 days
  2. A-1 Type Bus Marker Lamp (Plastic Lens) Plated Ring
    JET INOUE A-1 Type Bus Marker Lamp (Plastic Lens) Plated Ring
    Make a difference with color lens arrangement! Bus marker lamp A-1 type chrome plated ring. Plastic lens. 24V side marker lamp * Install with the drain hole facing down.
    Rating:
    100%
    from S$7.69
    Min. 2 days
  3. Marker Lamp Resin Lens Type
    MonotaRO Marker Lamp Resin Lens Type
    It is a standard marker for resin lenses. Rust-free screw type resin ring. The position of the screw can be adjusted between 43mm and 60mm according to the stay, which is very convenient. For DC24V vehicles only * When using with DC12V, please use a BA15S / 6W light bulb. * Please do not use it f... Read More
    Mass (g)  100  Outer Dia. x Height H (Φmm x mm)  90×80  Rated Current (A)  About 0.5  Cable Length (m)  Approx. 140 (0.3sq)  Material  Body Ring / PP, Lens / Acrylic  Suitable for  Reflector: Yak Y-44S, Ring: Yak T-44R 
    Rating:
    96%
    from S$4.79
    Min. 2 days
  4. Marker Lamp Glass Lens Type
    MonotaRO Marker Lamp Glass Lens Type
    Standard type marker for glass lenses Screw-type resin ring without rust. The position of the screw can be adjusted between 43mm and 60mm according to the stay, which is very convenient. For truck markers. * When using with DC12V, please use a BA15S / 6W light bulb. * Please do not use it for any... Read More
    Outer Dia. x Height H (Φmm x mm)  90×80  Rated Current (A)  About 0.5  Mass (g)  About 170  Cable Length (m)  Approx. 140 (0.3sq)  Material  Body / ring / PP, lens glass / glass  Suitable for  Reflector: Yak Y-44S, Ring: Yak T-44R 
    Rating:
    95%
    from S$5.59
    Min. 2 days
  5. Marker lamp LED12 24V car only
    MonotaRO Marker lamp LED12 24V car only
    It is a marker lamp using LED. It is bright because it has a built-in plated reflector. It is light with a resin lens. For DC24V vehicles only * This product is not completely waterproof, so be sure to waterproof it before installing. Please ask a contractor with specialized knowledge for install... Read More
    Number of LED (pieces)  12  Power Consumption (W)  Current Consumption (mA)  200  Rated Voltage (V)  24  Mounting Screw Spacing (mm)  61  Outer Dia. x Height H (Φmm x mm)  88×75  Cable Length (m)  Red: 270, Black: 160  Material  Resin  Light Angle  Wide angle 
    Rating:
    66%
    from S$13.99
    Min. 2 days
  6. Super meteor marker 12 / 24V
    YAC Super meteor marker 12 / 24V
    Brightness is about 3 times that of power LED! Uses a constant voltage circuit to prevent changes in brightness due to voltage Glitter UP with resin diamond cut lens
    Operating Temperature (℃)  -30~70  Cable Length (m)  Approx. 140 (0.5sq)  Mounting Screw Spacing (mm)  45~60  Height (mm)  78  Number of LED (pieces)  Diameter (Φmm)  90  Outer Dia. x Height H (Φmm x mm)  90×94  Material (ring)  ABS  Mass of Main Unit (g)  About 130  Mass (g/piece)  About 130  Mass (g)  About 130  Material (Lens)  Acrylic  Type  Bolt earth  Rated Voltage Fluctuation Range  DC10~32V  Rated Voltage (V)  DC12/24  Included Accessories  Flange nut M5 (2 pieces)  Material (Foot Plate)  PP / iron  Standard  Patent registration: No. 4484753 
    Rating:
    94%
    from S$34.99
    Min. 2 days
  7. Marker stay
    YAC Marker stay
    Marker parts (stay)
    Thickness (mm)  1.6  Outer Dia. x Height H (Φmm x mm)  110×80  Mounting Screw Spacing (mm)  66  Height (mm)  80  Material (Main Unit)  Iron  Material (Foot Plate)  Iron  Material  Iron  Type  wide 
    Rating:
    93%
    from S$3.69
    Min. 2 days
  8. Y-44 Reflector
    YAC Y-44 Reflector
    Marker parts
    Suitable for  CE-130B、CV-124、Y-44、Y-45、YT-L45  Material  PP  Material (Main Unit)  PP  Main material  PP  Material (Foot Plate)  PP 
    Rating:
    94%
    from S$3.99
    Min. 2 days
  9. LED marker lamp
    Shinwa Automotive Industry LED marker lamp
    Operating Temperature Range (℃)  -30~60  Rated Voltage (V)  24  Rated Current (mA)  60  Mass (g)  About 90  Types of Light Bulb  LED  Color  Yellow  Dimension (mm)  Φ87.5×80 
    Rating:
    90%
    from S$22.99
    Min. 2 days
  10. LED marker lamp
    Kobayashi Soken LED marker lamp
    Inheriting the design of the KB marker, wide-angle irradiation has been achieved by adopting high-brightness chip LEDs (6). The entire lens emits uniform light, improving visibility from the driver's seat. The combination of a wide-angle chip LED and a KB marker lens illuminates the road surf... Read More
    Rated Voltage (V)  24  Maximum Luminous Intensity (cd)  300 or less  Number of LED (pieces)  Mounting Screw Spacing (mm)  60  Outer Dia. x Height H (Φmm x mm)  91×73  LED Life (Hours)  About 40000  Material  Acrylic  Types of Light Bulb  LED  Color  yellow  LED Color  yellow 
    Rating:
    100%
    from S$14.99
    Min. 2 days
  11. JB Brightness Compatible J-1 Type Bus Marker Lens (Plastic Lens)
    JET INOUE JB Brightness Compatible J-1 Type Bus Marker Lens (Plastic Lens)
    A replacement accessory lens compatible with the JB bus marker lamp "Kira". (Limited to light bulb type and type with lens detachable) In particular, we have adopted a lens cut that takes into consideration compatibility with LED bulbs. * This product is a lens only. * Compatible bus ma... Read More
    Material  PC with packing 
    Rating:
    100%
    from S$3.19
    Min. 2 days
  12. P Top Marker Lamp with 12W Bulb
    YAC P Top Marker Lamp with 12W Bulb
    Standard marker for resin lenses For DC24V vehicles only
    Cable Length (m)  Approx. 140 (0.5sq)  Mounting Screw Spacing (mm)  45~60  Height (mm)  80  Diameter (Φmm)  90  Outer Dia. x Height H (Φmm x mm)  90×80  Rated Current (A)  About 0.5  Mass (g)  About 100  Mass of Main Unit (g)  About 100  Mass (g/piece)  About 100  Material (Lens)  Acrylic  Rated Current (mA)  Approximately 500 (at DC28V)  Types of Light Bulb  BA15s  Type  Bolt earth  Rated Voltage Fluctuation Range  DC20~32V  Voltage (V)  DC24  Rated Voltage (DC V)  DC24  Rated Voltage (V)  DC24  Rated Voltage  DC24V  applicable light bulb  DC24V/BA15S 12W  Suitable Bulbs  DC24V/BA15S 12W  Included Accessories  Flange nut M5 (2 pieces)  Material (ring)  PP  Material (Foot Plate)  PP / iron 
    Rating:
    91%
    from S$7.49
    Min. 2 days
  13. G-1 Type Bus Marker Lamp (Plastic Lens) Plated Ring
    JET INOUE G-1 Type Bus Marker Lamp (Plastic Lens) Plated Ring
    Make a difference with color lens arrangement! Bus marker lamp G-1 type chrome plated ring. Plastic lens. 24V side marker lamp * Install with the drain hole facing down.
    Rating:
    94%
    from S$7.99
    Min. 2 days
  14. Square Marker Front Lamp, Opening & Closing Type
    JET INOUE Square Marker Front Lamp, Opening & Closing Type
    A square marker lamp with a retro atmosphere. Glass lens type.
    Thickness (mm)  12  Dimension (mm)  42.5×82.5  Protection Class  IP67 
    Rating:
    89%
    from S$8.79
    Min. 2 days
  15. Marker stay (stainless steel)
    Nihon Body Parts Kogyo Marker stay (stainless steel)
    Thickness (mm)  1.5 
    Rating:
    83%
    from S$4.79
    Min. 2 days
  16. Waterproof Marker Lamp
    Nihon Body Parts Kogyo Waterproof Marker Lamp
    A marker lamp with a waterproof base set on a genuine type lens. Comes with 24V 12W ball (clear) and Giboshi terminal * The width of the stay mounting bolt is fixed at 60 mm.
    Outer Dia. x Height H (Φmm x mm)  88×74.5  Rated Voltage (V)  DC24 
    Rating:
    80%
    from S$12.99
    Min. 2 days
  17. Meteor marker (DC24V)
    YAC Meteor marker (DC24V)
    LED marker for glass lens For DC24V vehicles only
    Number of LED (pieces)  11  Cable Length (m)  Approx. 140 (0.3sq)  Mounting Screw Spacing (mm)  60  Diameter (Φmm)  90  Height (mm)  94  Material (ring)  ABS  Mass (g)  About 150  Mass of Main Unit (g)  About 220  Mass (g/piece)  About 220  Type  Bolt earth  Lens Color  Clear  Rated Voltage Fluctuation Range  DC20~32V  Rated Voltage (V)  DC24  Standard  Design registration: No. 4484753  Included Accessories  Flange nut M5 (2 pieces)  Material (Lens)  Glass  Material (Foot Plate)  PP / iron 
    Rating:
    78%
    from S$23.99
    Min. 2 days
  18. LED Marker & Under Light
    KOITO LED Marker & Under Light
    The new wide lighting design strongly appeals to the surrounding area! Built-in white underlight to illuminate the shoulder and prevent contact accidents and entanglement accidents! [High quality] MADE IN JAPAN (1 year warranty) [Long life, power saving] No need to replace bulbs [Improved workabi... Read More
    Cable Length (m)  180  Power (W)  2.4  Rated Voltage (V)  24  Mounting Screw Spacing (mm)  60  Types of Light Bulb  LED 
    Rating:
    91%
    from S$47.99
    Min. 2 days
  19. Bus Marker Lamp Mounting Stay Flat Type
    JET INOUE Bus Marker Lamp Mounting Stay Flat Type
    A stay for mounting a stainless steel bus marker lamp that does not easily rust. Easy to install! Just screw the bus marker lamp and stay!
    Material  Stainless steel 
    Rating:
    100%
    from S$6.39
    Min. 2 days
  20. Marker stay (plating)
    Nihon Body Parts Kogyo Marker stay (plating)
    Rating:
    91%
    from S$2.29
    Min. 2 days
  21. LED3 Flat Marker NEO 12 / 24V
    JET INOUE LED3 Flat Marker NEO 12 / 24V
    Equipped with 3 ultra-bright SMDs for amazing brightness! The sharp light emission unique to LEDs creates a splendid night scene. It is an energy-saving design unique to LEDs. As a side marker * Although this product has noise countermeasures, please note that noise may occur in radios, car navig... Read More
    Material  (Lens) PC, (Body) ABS  Dimension (mm)  58×96×20  Types of Light Bulb  LED 
    Rating:
    91%
    from S$25.99
    Min. 2 days
  22. Y-44 Ring
    YAC Y-44 Ring
    Marker parts
    Suitable for  CE-130B、CV-124、Y-44、Y-45、YT-L45  Included Accessories  Mounting screw  Material  PP  Material (Foot Plate)  PP  Main material  PP  Material (Main Unit)  PP 
    Rating:
    100%
    from S$2.99
    Min. 2 days
  23. Marker lamp stay
    DOWA Marker lamp stay
    Thickness (mm)  1.2  Width (mm)  82  Material  Stainless steel  Suitable for  Y44 series 
    Rating:
    74%
    from S$7.39
    Min. 2 days
  24. Marker lamp stay Z type (60mm stage)
    Shinwa Automotive Industry Marker lamp stay Z type (60mm stage)
    Thickness (mm)  1.6  Length (mm)  110+40  Width (mm)  80  Material  Iron (plating)  Type  Z type 
    Rating:
    100%
    from S$4.79
    Min. 2 days
  25. P top marker lens (acrylic)
    YAC P top marker lens (acrylic)
    Marker parts (lens)
    Material (Lens)  Acrylic  Material  Acrylic  Main material  Acrylic  Suitable for  Y-45、Y-90、YT-L45 
    Rating:
    89%
    from S$2.99
    Min. 2 days
  26. Bus Marker Lamp Mounting Stay Z Type
    JET INOUE Bus Marker Lamp Mounting Stay Z Type
    Material  Stainless steel 
    Rating:
    98%
    from S$7.49
    Min. 2 days
  27. Inner cord
    DAIJI INDUSTRY (Meltec) Inner cord
    For replacement of bulb socket cords such as marker lamps when they are damaged or deteriorated * Please check if it is installed correctly.
    Height (mm)  150 
    Rating:
    100%
    from S$4.19
    Min. 2 days
  28. Super Meteor Markers Unit 12 / 24V
    YAC Super Meteor Markers Unit 12 / 24V
    Uses a constant current circuit that prevents brightness changes due to DC12 / 24V shared voltage. Power LED specifications. Super meteor marker repair parts. * The installation example image is a lighting image using Million DX Marker Clear (CV-121). The lens is not included in this product.
    Operating Temperature (℃)  -30~70  Mass (g)  About 40  Mass of Main Unit (g)  About 40g  Mass (g/piece)  About 40g  Material (Main Unit)  Acrylic and iron (galvanized)  Material (Foot Plate)  Acrylic and iron (galvanized)  Bolster  BA15s  Rated Voltage Fluctuation Range  DC10~32V  Rated Voltage (V)  DC12/24  Voltage (V)  DC12/24  Rated Voltage (DC V)  DC12/24  Rated Voltage  DC12/24V  Standard  Design registration: No. 1507662 
    Rating:
    95%
    from S$25.99
    Min. 2 days
  29. LED twin strobe marker
    JET INOUE LED twin strobe marker
    LED twin strobe markers are now available! You can choose between left and right simultaneous flash and left and right alternating flash! * This product is not completely waterproof. It will only be waterproof for daily life.
    Thread Pitch (mm)  80  Dimension (mm)  87 × 26 × height 17  Rated Current (mA)  About 120  Rated Voltage (V)  DC12/24  Types of Light Bulb  LED  Screw Dimensions (mm)  Φ4 
    Rating:
    89%
    from S$31.99
    Min. 2 days
  30. slim meteor point marker (DC12 / 24V shared)
    YAC slim meteor point marker (DC12 / 24V shared)
    Main material  (The body) ABS, plating, (lens) acrylic  Material  (The body) ABS, plating, (lens) acrylic  Thickness (mm)  11  Cable Length (m)  Approx. 200 (0.5sq)  Number of LED (pieces)  Mounting Screw Spacing (mm)  70  Outer Dia. x Height H (Φmm x mm)  96×45  Dimensions, Width W x Depth D x Height H (mm)  96×45×26  Material (Main Unit)  ABS  Mass of Main Unit (g)  About 42  Mass (g)  About 42  Mass (g/piece)  About 42  Material (Lens)  Acrylic  Type  Cord ground  Rated Voltage Fluctuation Range  DC10~32V  Rated Voltage (V)  DC12/24  Rated Voltage (DC V)  DC12/24  Voltage (V)  DC12/24  Rated Voltage  DC12/24V  Standard  Design registration: No. 1350840  Included Accessories  Flange nut M4 (2 pcs) 
    Rating:
    90%
    from S$34.99
    Min. 2 days
  31. G-1 plastic marker lens
    JET INOUE G-1 plastic marker lens
    It can be used for A-1 type / G-1 type / A type / G type / C type bus marker lamps. * Lens only
    Material  Acrylic 
    Rating:
    93%
    from S$4.79
    Min. 2 days
  32. LED6 Ultra Flat Marker Lamp 24V
    JET INOUE LED6 Ultra Flat Marker Lamp 24V
    Only 13mm thick !! The ultimate flat lamp. Equipped with 6 high-brightness LEDs to produce a sharp glow. Energy-saving design unique to LEDs. * Depending on the vehicle, noise may occur in the radio, car navigation system, back camera, etc. due to the use of this product.
    Material  (Lens) PC, (Body) ABS  Rated Voltage (V)  24  Dimension (mm)  32×97×13  Current Consumption (mA)  About 20  Types of Light Bulb  LED 
    Rating:
    64%
    from S$31.99
    Min. 2 days
  33. LED marker KB45 ++ yellow + 24V
    Kobayashi Soken LED marker KB45 ++ yellow + 24V
    It has a long life and is completely waterproof, completely overcoming road illumination, which was a weak point of conventional LED marker lamps. The color is a beautiful lemon yellow. 1. Only lit in yellow. (Multicolor is not available)
    Rated Power Consumption (W)  0.5  Current Consumption (mA)  20  Rated Voltage (V)  24  Material  Acrylic  Lens Color  Yellow  LED Color  Yellow  Color  Yellow  LED  Yellow wide-angle LED bulb 
    from S$22.99
    Min. 2 days
  34. Interchangeable Glass Lenses for Marker Lamp
    MonotaRO Interchangeable Glass Lenses for Marker Lamp
    A glass spare lens for Monotaro marker lamps. For truck markers. * Can also be used for Monotaro marker lamps. * Do not use for any purpose other than its intended purpose. * Glass lenses may vary in color.
    Suitable for  For MonotaRO product number M-441G  Material  Glass  Color  Yellow 
    Rating:
    93%
    from S$4.19
    Min. 2 days
  35. LED diffusion marker yellow DC24
    YAC LED diffusion marker yellow DC24
    It also illuminates the ground. New lens cut that maximizes the refraction characteristics of light. Sealed waterproof type that suppresses the ingress of water as much as possible. Uses a ventilation seal to prevent condensation. For DC24V vehicles only * Water may enter from the wiring connecte... Read More
    Cable Length (m)  140(0.5sq)  Lens Color  yellow 
    Rating:
    100%
    from S$13.99
    Min. 2 days
  36. Marker stay
    YAC Marker stay
    Marker parts (stay)
    Thickness (mm)  Material  Iron 
    Rating:
    88%
    from S$3.89
    Min. 2 days
  37. Flat Marker Lamp Mounting Stay Z Type
    JET INOUE Flat Marker Lamp Mounting Stay Z Type
    Thickness (mm)  1.5  Height (mm)  30  Length (mm)  80  Material  Stainless steel 
    Rating:
    70%
    from S$7.99
    Min. 2 days
  38. LED3 Mini Flat Marker NEO 12 / 24V
    JET INOUE LED3 Mini Flat Marker NEO 12 / 24V
    High power small mini flat marker lamp. Achieves amazing brightness in spite of its small size. The sharp shine unique to LEDs attracts 120% of attention! It is an energy-saving design unique to LEDs. As a side marker * Although this product has noise countermeasures, please note that noise may o... Read More
    Material  (Lens) PC, (Body) ABS  Dimension (mm)  44.5×84×20  Types of Light Bulb  LED 
    Rating:
    100%
    from S$28.99
    Min. 2 days
  39. P million lens
    YAC P million lens
    Super meteor marker repair parts.
    Material (Lens)  Acrylic  Material  Acrylic  Main material  Acrylic  Suitable for  CE-160 series 
    Rating:
    100%
    from S$5.29
    Min. 2 days
  40. Glass Marker Lens
    YAC Glass Marker Lens
    Marker parts (lens)
    Main material  Glass  Material  Glass  Material (Lens)  Glass  Suitable for  Y-44、Y-89 
    Rating:
    90%
    from S$6.29
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 300

Set Ascending Direction