All Category

Power & Hand Tools

View : Grid List
Filter

Items 1 - 40 of 975

Set Ascending Direction
  1. Ball Grip Screwdriver
    VESSEL Ball Grip Screwdriver
    Tightening force with a margin for screws. Cushion grip, color coded with (+) (-). The cutting edge is processed with high-precision black point. * Do not disassemble or modify. * Please check the correct usage, size, and usage before use. * Be careful of short circuits and electric shocks during... Read More
    Type  Grip screwdriver  Shaft Penetration  None  Set Contents  Single item  Material (Grip)  Soft resin  Cutting Edge Magnet  Yes  Tip Size (#) 
    Rating:
    94%
    from S$5.79
    Min. 2 days
  2. Plastic Hammer
    VESSEL Plastic Hammer
    The head is made of flexible and tough plastic so it will not damage the workpiece during use.
    Material (Head)  Resin / Rubber  Type  Resin hammer  Material (Handle)  Wood 
    Rating:
    91%
    from S$19.99
    Min. 2 days
  3. Electric Ball Grip Screwdriver
    VESSEL Electric Ball Grip Screwdriver
    A new style of hand tools that assists with electric power. Fast tightening is with an electric motor, and final tightening is like a manual screwdriver. With high brightness LED light. Equipped with a USB rechargeable Li-ion battery (3.6V-800mAh). Supports 6.35 mm bits on the opposite side of th... Read More
    Rotation Speed at No Load (min-1[rpm])  (Maximum) 280  Continuous Operating Time (minutes)  (Unloaded) Approx. 40  Battery Capacity (Ah)  0.8  Mass (g)  160 (excluding accessories)  Voltage (V)  3.6  Charge / discharge count (times)  About 500  Charging Time (minutes)  About 60  Output  Charger: 5V_1A  Applicable battery  Li-ion_3.6V  Charging Method  Micro_USB-typeB_USB charging 
    Rating:
    87%
    from S$65.99
    Min. 2 days
  4. MEGADORA Thru Screwdriver
    VESSEL MEGADORA Thru Screwdriver
    The plus cutting edge is a jaws fit. Cutting edge tip shape that prevents the driver's lifting phenomenon <come out> peculiar to cross screws as much as possible. The grip is Japan's first triple molding. A soft and hard grip composed of smooth lines and surfaces with few irregulari... Read More
    Type  Grip screwdriver  Tip Shape  Plus (+)  Material (Grip)  Resin  Set Contents  Single item  Shaft Penetration  Yes  Cutting Edge Magnet  Yes 
    Rating:
    91%
    from S$16.99
    Min. 2 days
  5. Wire Stripper Screw Cutter (Single Wire / Stranded Wire)
    VESSEL Wire Stripper Screw Cutter (Single Wire / Stranded Wire)
    The blade achieves high-precision peeling by polishing with a diamond precision grindstone. The grip comes with a conversion table for AWG, mm, and mm 2.
    Mass (g)  100  Overall Length (mm)  155 
    Rating:
    93%
    from S$31.99
    Min. 2 days
  6. MEGADORA Through Screwdriver
    VESSEL MEGADORA Through Screwdriver
    The grip is Japan's first triple molding. A soft and hard grip composed of smooth lines and surfaces with few irregularities. The Megadora penetrating driver has a bolster part on which a spanner can be hung. The minus cutting edge has a black point finish. The minus edge of a Megadora ordina... Read More
    Type  Grip screwdriver  Tip Shape  Minus(-)  Material (Grip)  Resin  Set Contents  Single item  Cutting Edge Magnet  Yes  Shaft Penetration  Yes 
    Rating:
    96%
    from S$16.99
    Min. 2 days
  7. Ball Grip Thru Screwdriver
    VESSEL Ball Grip Thru Screwdriver
    A generous tightening force on the screws. Cushion grips are color coded with +/-. Chrome vanadium steel, hardened whole body. With cutting edge magnet.
    Type  Grip screwdriver  Material (Grip)  Resin  Set Contents  Single item  Shaft Penetration  Yes  Cutting Edge Magnet  Yes 
    Rating:
    93%
    from S$7.79
    Min. 2 days
  8. Super Cushion Driver (Stubby Type)
    VESSEL Super Cushion Driver (Stubby Type)
    Super cushion grip with excellent fit in the hand. The shaft is chrome vanadium steel, which is tough and has excellent durability, and is hardened throughout the body. Rust-resistant black chrome-plated finish. A stubby type that demonstrates its power in a limited space.
    Shaft Length (mm)  15  Handle Diameter (Φmm)  35  Mass (g)  35  Shank Diameter (Φmm)  Overall Length (mm)  68  Shaft Penetration  None  Tip Shape  Plus (+)  Material (Grip)  Resin  Set Contents  Single item  Type  Stubby driver  Cutting Edge Magnet  Yes 
    Rating:
    85%
    from S$6.89
    Min. 2 days
  9. Recessed GIZA Bit
    VESSEL Recessed GIZA Bit
    The knurled part bites into the screw and prevents the bit from rising. Ideal for work in unstable places such as light sky and boarding work * BW-175 and BW-176 are a set of two 65 mm bits and three 100 mm bits.
    Double-headed function  One head  Tip Shape  Plus (+)  Type  Stepped 
    Rating:
    93%
    from S$6.89
    Min. 2 days
  10. Precision Screwdriver 6pcs Set
    VESSEL Precision Screwdriver 6pcs Set
    Comes in a clear case that is convenient to carry. If you cut off the header, it will have a square shape, making it easy to store in a tool box or maintenance bag.
    Set Contents  Set product  Shaft Penetration  None  Cutting Edge Magnet  None  Type  Set product 
    Rating:
    80%
    from S$24.99
    Min. 2 days
  11. MEGADORA Standard Screwdriver
    VESSEL MEGADORA Standard Screwdriver
    The plus cutting edge is a jaws fit. Cutting edge tip shape that prevents the driver's lifting phenomenon <come out> peculiar to cross screws as much as possible. The minus cutting edge has a black point finish. The grip is Japan's first triple molding. A soft and hard grip composed... Read More
    Type  Grip screwdriver  Shaft Penetration  None  Tip Shape  Plus (+)  Material (Grip)  Resin  Set Contents  Single item  Cutting Edge Magnet  Yes 
    Rating:
    92%
    from S$10.99
    Min. 2 days
  12. Super Cushion Screwdriver
    VESSEL Super Cushion Screwdriver
    Super cushion grip with excellent fit in the hand. It is soft when grasped, and the torque is transmitted with the feeling that it snaps into the palm of the hand the moment it is twisted. The shaft is chrome vanadium steel, which is tough and has excellent durability, and is hardened throughout ... Read More
    Tip Size  Type  Grip screwdriver  Tip Shape  Minus(-)  Shaft Penetration  None  Material (Grip)  Resin  Set Contents  Single item  Cutting Edge Magnet  Yes 
    Rating:
    86%
    from S$8.69
    Min. 2 days
  13. Cushioned Grip Screwdriver
    VESSEL Cushioned Grip Screwdriver
    Ideal for screw tightening in the precision field. The minus cutting edge is a straight cut that does not get caught even in narrow places. Chromium vanadium steel, whole body hardened. The cutting edge is black point processed, which is not affected by the thickness of the plating layer.
    Handle Diameter (Φmm)  20.5  Shank Diameter (Φmm)  Cutting Edge Magnet  None  Shaft Penetration  None  Type  Precision screwdriver  Material (Grip)  Resin  Set Contents  Single item 
    Rating:
    91%
    from S$6.39
    Min. 2 days
  14. Power Grip Screwdriver
    VESSEL Power Grip Screwdriver
    The grip is designed by carefully considering the shape of the palm. It is a penetrating type with a plastic handle and is resistant to abuse. With a hexagonal part that can be strongly tightened with a spanner or the like. Whole body hardened with chrome vanadium steel. With tip magnet.
    Type  Grip screwdriver  Tip Shape  Minus(-)  Set Contents  Single item  Shaft Penetration  Yes  Cutting Edge Magnet  Yes  Material (Grip)  plastic 
    Rating:
    100%
    from S$11.99
    Min. 2 days
  15. Power Grip Screwdriver
    VESSEL Power Grip Screwdriver
    The grip is designed by carefully considering the shape of the palm. It is a penetrating type with a plastic handle and is resistant to abuse. With a hexagonal part that can be strongly tightened with a spanner or the like. Whole body hardened with chrome vanadium steel. With tip magnet.
    Type  Grip screwdriver  Tip Shape  Plus (+)  Set Contents  Single item  Cutting Edge Magnet  Yes  Shaft Penetration  Yes  Material (Grip)  plastic 
    Rating:
    93%
    from S$11.99
    Min. 2 days
  16. Replacement Bit Set
    VESSEL Replacement Bit Set
    Exchange bit set.
    Double-headed function  One head 
    Rating:
    70%
    from S$5.89
    Min. 2 days
  17. GOUSAI [Ball-Point] Long Bit
    VESSEL GOUSAI [Ball-Point] Long Bit
    Quantity per Set (pieces)  Overall Length (mm)  150  Hex Size across Flats (mm)  6.35  Tip Shape  Ball point  Double-headed function  One head  Cutting Edge Magnet  Yes 
    Rating:
    100%
    from S$6.99
    Min. 2 days
  18. TorxBit A5
    VESSEL TorxBit A5
    A short bit exclusively for Torx (R) screws.
    Quantity per Set (pieces)  10  Overall Length (mm)  32  Shank Diameter (Φmm)  Part No.  A5  Double-headed function  One head  Tip Shape  Torx 
    Rating:
    100%
    from S$9.89
    Min. 2 days
  19. Alpha-Bit, Packed in a Plastic Bag
    VESSEL Alpha-Bit, Packed in a Plastic Bag
    Quantity per Set (pieces)  10  Double-headed function  Both heads  Heat Treatment Category  Tip Size  No.2  Tip Shape  Plus (+)  Type  Torsion 
    Rating:
    96%
    from S$22.99
    Min. 2 days
  20. Final tightening ball point wrench 8300BP
    VESSEL Final tightening ball point wrench 8300BP
    A long type that is ideal for deep places. Uses EX hard metal that is resistant to twisting and breaking. The maximum tilt angle is 38 ° (design value). When the wrench is tilted, the driving position moves near the entrance of the hexagonal hole, so even if the neck is thick, the tilt angle can ... Read More
    Tilt Angle (°)  38  Material / Finish  Axis: Bit material  Tip Shape  Ball point  Material  EX Gokin  Size Standard  Milli  Specification  Whole body heat treatment with magnet 
    from S$6.39
    Min. 2 days
  21. Flat-Shaped Ratchet Replacement Bit
    VESSEL Flat-Shaped Ratchet Replacement Bit
    Mass (g)  28  Double-headed function  One head 
    Rating:
    90%
    from S$6.89
    Min. 2 days
  22. Screw Extractor Bit Slim
    VESSEL Screw Extractor Bit Slim
    The slim tip shape that can be used even in deep places makes it easy to remove crushed screws. You can turn screws that cannot be turned with a screwdriver. It is a product compatible with stainless steel screws. Removal of licked and crushed screws, etc.
    from S$14.99
    Min. 2 days
  23. Precision Screwdriver, [Microstix]
    VESSEL Precision Screwdriver, [Microstix]
    It has three wing shapes, supports high torque, and prevents screw crushing. Microstix (R) and Microsticks are registered trademarks of OSG System Products Co., Ltd. Vessel is an official licensee of OSG System Products Co., Ltd. For maintenance of precision equipment such as smartphones, portabl... Read More
    Shaft Length (mm)  20  Tip size (mm)  7/12  Set Contents  Single item  Tip Shape  Y type 
    from S$10.99
    Min. 2 days
  24. SAKISUBO [Ball-Point] Bit, Thin Tip
    VESSEL SAKISUBO [Ball-Point] Bit, Thin Tip
    Bits for hexagon socket head cap screws and hexagon socket set screws. The tip has a ball point shape and an inclination angle of 30 °, making it ideal for use in narrow and limited places with high-density mounting.
    Overall Length (mm)  100  Double-headed function  One head  Cutting Edge Magnet  Yes  Tip Shape  hexagonal 
    from S$4.89
    Min. 2 days
  25. Vector Electrician Driver
    VESSEL Vector Electrician Driver
    100-220V insulation specification for low voltage. With a shaft cover with excellent pressure resistance, short-circuit accidents are prevented. It is a thin shaft specification that reaches the narrow gap of the terminal block. It is a whole body quenching. The cutting edge is high-precision bla... Read More
    Shaft Length (mm)  100  Mass (g)  101  Overall Length (mm)  186  Trusco Part No.  356-0228  Handle Diameter (Φmm)  40  Tip Size (Blade Width x Thickness) (mm)  5.5×0.9  Shank Diameter (Φmm)  6.4  Type  Electrician screwdriver  Tip Shape  Minus(-)  Shaft Penetration  None  Material (Grip)  Resin  Set Contents  Single item  Cutting Edge Magnet  Yes 
    from S$10.99
    Min. 2 days
  26. Square Both-Ends Bit Belt
    VESSEL Square Both-Ends Bit Belt
    Bits for square screws often used for sashes and seismic hardware. Do not get stuck in the chuck with the ring.
    RoHS directive (corresponding to 10 substances)  Mass (g)  28  Overall Length (mm)  65  Double-headed function  Both heads  Heat Treatment Category  Tip Size  QS3  Size  SQ2×110  Tip Shape  Square 
    from S$15.99
    Min. 5 days
  27. Driver Bit D71
    VESSEL Driver Bit D71
    Half-moon cross-section outlet. High-precision machining cutting edge that meets screw standards.
    Shank Diameter (Φmm)  Overall Length (mm)  44  Part No.  D71  Double-headed function  One head 
    from S$35.99
    Min. 2 days
  28. Micro Driver
    VESSEL Micro Driver
    The handle has a rotating cap for fast rotation. The cutting edge is black point processed, and the accuracy is dramatically improved.
    Quantity per Set (pieces)  Handle Diameter (Φmm)  10  Shaft Penetration  None  Cutting Edge Magnet  None  Type  Precision screwdriver  Material (Grip)  Resin  Set Contents  Single item 
    Rating:
    94%
    from S$4.89
    Min. 2 days
  29. Super Cushion Screwdriver
    VESSEL Super Cushion Screwdriver
    Super cushion grip with excellent fit in the hand. It is soft when grasped, and the torque is transmitted with the feeling that it snaps into the palm of the hand the moment it is twisted. The shaft is chrome vanadium steel, which is tough and has excellent durability, and is hardened throughout ... Read More
    Type  Grip screwdriver  Shaft Penetration  None  Tip Shape  Plus (+)  Material (Grip)  Resin  Set Contents  Single item  Cutting Edge Magnet  Yes 
    Rating:
    94%
    from S$7.99
    Min. 2 days
  30. Wire Stripper
    VESSEL Wire Stripper
    A tool used to strip the vinyl coating of vinyl wires. The coating can be peeled off without damaging the wire, which is convenient and efficient.
    Overall Length (mm)  170  Mass (g)  350 
    Rating:
    97%
    from S$48.99
    Min. 2 days
  31. Plastic hammer replacement head
    VESSEL Plastic hammer replacement head
    Made of flexible and tough plastic, it will not damage the workpiece during use. * Sold as a single item. Please purchase two hammers on the left and right, if you need them.
    Type  Hammer replacement head 
    Rating:
    97%
    from S$2.19
    Min. 2 days
  32. Power Socket Driver
    VESSEL Power Socket Driver
    Dedicated for fastening hexagon bolts and nuts. The palm-shaped grip design makes it easy to apply force.
    Shaft Penetration  None  Cutting Edge Magnet  None  Type  Nut driver  Material (Grip)  Resin  Set Contents  Single item  Tip Shape  Socket (box) 
    Rating:
    84%
    from S$6.99
    Min. 2 days
  33. Power Grip TORX Screwdriver 5400TX
    VESSEL Power Grip TORX Screwdriver 5400TX
    The shaft is chrome vanadium steel, and the whole body is hardened. Champagne gold plating that maintains the accuracy of the cutting edge. The handle is acetate resin and ergonomic design. Compatible with tamper proof screws (screws with tamper-proof) (excluding T5 and T6)
    Material (Grip)  Acetate resin  Type  Grip screwdriver  Shaft Penetration  None  Cutting Edge Magnet  None  Set Contents  Single item 
    Rating:
    95%
    from S$8.99
    Min. 2 days
  34. Flat-shaped Ratchet Screwdriver
    VESSEL Flat-shaped Ratchet Screwdriver<Straight Type>
    A thin ratchet with a head of only 18 mm. A bit with a magnet that makes it easy to work even in tight spaces. The main body can store two bits and has a hanging hole. High-precision ratchet gear, can be tightened firmly. Ideal for work in tighter spaces.
    Set Contents  Set product  Overall Length (mm)  105  Mounting Height (mm)  18  Tip Size  19.5  Shaft Penetration  None  Type  Set product  Specification  Straight  Cutting Edge Magnet  Yes 
    Rating:
    88%
    from S$14.99
    Min. 2 days
  35. Strong Thru Screwdriver
    VESSEL Strong Thru Screwdriver
    The shaft is chrome vanadium steel, and the whole body is hardened. With a strong magnet.
    Type  Grip screwdriver  Tip Shape  Minus(-)  Set Contents  Single item  Cutting Edge Magnet  Yes  Shaft Penetration  Yes  Material (Grip)  wooden 
    Rating:
    97%
    from S$10.99
    Min. 2 days
  36. Gold-Bit, with Thin Tip, Magnetic
    VESSEL Gold-Bit, with Thin Tip, Magnetic
    Vessel Bit has the highest production volume in Japan. High-volume production achieves stable quality and low cost. With the use of original special alloy steel, advanced processing technology and thorough quality control, it has a proven track record as the most breakable bit.
    Quantity per Set (pieces)  Double-headed function  One head  Type  bit  Cutting Edge Magnet  Yes 
    Rating:
    90%
    from S$7.69
    Min. 2 days
  37. Crystalline Screwdriver
    VESSEL Crystalline Screwdriver
    The shaft is chrome vanadium steel whole body hardened. With magnet. Crystal shine, crystal line pattern. Color coded with + and-.
    Type  Grip screwdriver  Shaft Penetration  None  Tip Shape  Plus (+)  Color  Red  Set Contents  Single item  Cutting Edge Magnet  Yes  Material (Grip)  plastic 
    Rating:
    84%
    from S$5.59
    Min. 2 days
  38. Both-Ends Gold Bit (with Magnet)
    VESSEL Both-Ends Gold Bit (with Magnet)
    It can be attached to most electric, charging, and air (impact) screwdrivers on the market in Japan. Long life, powerful type for electric, charging, air driver, impact is OK! * GM142500 and GM142300 have a silver finish and S hanger specifications. * Be sure to install and replace the bid. Wear ... Read More
    Double-headed function  Both heads  Heat Treatment Category  Tip Shape  Plus (+)  Material  Special steel  Cutting Edge Magnet  Yes 
    Rating:
    92%
    from S$5.89
    Min. 2 days
  39. Screw Removal Bit
    VESSEL Screw Removal Bit
    The crushed screw can be easily removed. For electric screwdrivers. The drill can be drilled and the screw removed in the same direction (counterclockwise rotation), and the screw can be removed. You can turn screws that cannot be turned with a screwdriver, such as crushed screws, tanned screws, ... Read More
    Hex Size across Flats (mm)  6.35  Overall Length (mm)  82  Suitable for  Pan head screw, flat head screw, pan BRP  Nonconformity  Thin washer, drill screw, course thread 
    Rating:
    81%
    from S$12.99
    Min. 2 days
  40. Pneumatic / Electric Screwdriver Bit M-A14, Magnetic
    VESSEL Pneumatic / Electric Screwdriver Bit M-A14, Magnetic
    Betsuselbit has the highest production volume in Japan. High-volume production achieves stable quality and low cost. With the use of original special alloy steel, advanced processing technology and thorough quality control, it has a proven track record as the most breakable bit. GT-H4R / H4PR / H... Read More
    Quantity per Set (pieces)  10  Double-headed function  Both heads  Tip Shape  Plus (+)  Cutting Edge Magnet  Yes 
    Rating:
    93%
    from S$27.99
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 975

Set Ascending Direction