All Category

Resin Crafting

View : Grid List
Filter

Items 1 - 40 of 79

Set Ascending Direction
  1. Embossed heater
    KIYOHARA Embossed heater
    A handy size embossed heater that blows warm air. Unlike dryers, you can heat the object at a higher temperature without producing extra wind that interferes with crafting. Ideal for removing small bubbles in the resin liquid before curing and for embossing stamps.
    Length L x Diameter (Φmm)  240 x 47 (excluding power cord) 
    Rating:
    100%
    from S$59.99
    Min. 2 days
  2. Resin cleaner
    PADICO Resin cleaner
    A resin cleaner with low odor and low irritation. It can be used for cleaning tools used in resins and for releasing cured products with soft molds. * When using ethanol, be sure to allow the cured product to cool down a little before starting work.
    Rating:
    100%
    from S$8.39
    Min. 2 days
  3. Toning stick
    PADICO Toning stick
    Length (mm)  150 
    Rating:
    90%
    from S$4.99
    Min. 2 days
  4. Toning palette
    PADICO Toning palette
    Dimensions, Width W x Height H x Depth D (mm)  52×70×12 
    from S$4.99
    Min. 2 days
  5. Soft mold
    PADICO Soft mold
    Rating:
    100%
    from S$2.69
    Min. 2 days
  6. Resin injector
    Nippon Chuko Resin injector
    Recommended for double-sided type and making small works! It is difficult for air bubbles to enter! * For cleaning after use, use a nail polish remover containing acetone.
    Capacity (mL)  12 
    Rating:
    40%
    from S$16.99
    Min. 2 days
  7. Soft mold for resin craft
    Nippon Chuko Soft mold for resin craft
    from S$16.99
    Min. 2 days
  8. Soft mold sphere type pro
    Nippon Chuko Soft mold sphere type pro
    from S$26.99
    Min. 2 days
  9. Embossed heater 3000
    KODOMO NO KAO Embossed heater 3000
    from S$48.99
    Min. 2 days
  10. Silicon sheet 198mm × 141mm
    Nippon Chuko Silicon sheet 198mm × 141mm
    If you lay it on your hand when working with resin liquid, it will not stain your desk and you can easily remove the hardened resin.
    Dimension (mm)  198×141 
    from S$11.99
    Min. 2 days
  11. Parts series Soft mold
    Nippon Chuko Parts series Soft mold
    * This mold is not mirror-finished
    Unsuitable materials / uses  Silicone material  Usable materials  Resin 
    from S$24.99
    Min. 4 days
  12. Resin Craft Soft Mold Flower Solid Type B
    KAMESHIMA Resin Craft Soft Mold Flower Solid Type B
    from S$16.99
    Min. 4 days
  13. Sachet silicone mold
    Nippon Chuko Sachet silicone mold
    Pour the wax melted in a hot water into the mold and let it cool and harden. If you like, mix oil with wax or put dried flowers on it to enjoy the scent. Notation size is the completed size. * The indicated size is the completed size.
    Material  Silicon 
    from S$9.99
    Min. 4 days
  14. Resin Craft Soft Mold Water Glass Type
    KAMESHIMA Resin Craft Soft Mold Water Glass Type
    from S$18.99
    Min. 4 days
  15. Soft mold box dedicated lid type (with mounting ring)
    Nippon Chuko Soft mold box dedicated lid type (with mounting ring)
    This type is an optional box type small, medium and large dedicated lid parts type. * This mold is not mirror-finished
    Ring Size (mm)  4×4×1.5  Usable materials  Resin  Material  Silicone rubber 
    from S$21.99
    Min. 4 days
  16. PDC403249 Hole Maker Resin Drilling Parts
    PADICO PDC403249 Hole Maker Resin Drilling Parts
    Revolutionary! Makes bead-like holes easy.
    Classification of the Hazardous  Non-dangerous goods 
    from S$16.99
    Min. 5 days
  17. Resin craft soft mold coffee cup type
    KAMESHIMA Resin craft soft mold coffee cup type
    from S$18.99
    Min. 4 days
  18. Paper / cloth coating liquid
    PADICO Paper / cloth coating liquid
    It is a coating liquid that prevents the resin liquid from soaking into the parts with resin craft and transparent resin (resin). Prevention of resin liquid penetration
    Dimensions, Width W x Depth D x Height H (mm)  100×18×90 
    from S$6.69
    Min. 2 days
  19. PDC403263 Jewel Drop Special Pom Pom Attachment
    PADICO PDC403263 Jewel Drop Special Pom Pom Attachment
    The jewel drop pearl series can be mixed with resin and can be applied directly from above by attaching a special attachment.
    Classification of the Hazardous  Non-dangerous goods 
    from S$6.69
    Min. 5 days
  20. PDC403262 Pom Pom Stand
    PADICO PDC403262 Pom Pom Stand
    It is a stand where you can stick your work on the adhesive part and fix it.
    Classification of the Hazardous  Non-dangerous goods 
    from S$4.99
    Min. 5 days
  21. Resin craft soft mold
    Nippon Chuko Resin craft soft mold
    from S$15.99
    Min. 4 days
  22. Resin craft soft mold coffee cup saucer type
    KAMESHIMA Resin craft soft mold coffee cup saucer type
    from S$21.99
    Min. 4 days
  23. PDC403247 Silicone mold sphere 16mm ball × 2 pieces
    PADICO PDC403247 Silicone mold sphere 16mm ball × 2 pieces
    Finally, a silicone mold that makes almost a sphere is born.
    from S$16.99
    Min. 5 days
  24. Jewel mold mini
    PADICO Jewel mold mini
    Molding of resin and clay work
    from S$14.99
    Min. 4 days
  25. Mold 3-piece set
    PADICO Mold 3-piece set
    The popular mold [jewelry, cube, hemisphere] is a bargain as a 3-piece set. Don't miss this bargain opportunity!
    from S$44.99
    Min. 5 days
  26. Embossed Heater
    AS ONE Embossed Heater
    As ONE Part Number  2-5675-11 
    from S$88.99
    Min. 5 days
  27. Resin Craft Soft Mold Pug & French Bulldog Silhouette
    KAMESHIMA Resin Craft Soft Mold Pug & French Bulldog Silhouette
    from S$16.99
    Min. 4 days
  28. Resin craft soft mold mug type
    KAMESHIMA Resin craft soft mold mug type
    from S$18.99
    Min. 4 days
  29. Resin Craft Soft Mold Ladder Charm
    KAMESHIMA Resin Craft Soft Mold Ladder Charm
    from S$16.99
    Min. 4 days
  30. Soft mold for resin craft
    KAMESHIMA Soft mold for resin craft
    from S$16.99
    Min. 4 days
  31. PDC403248 Silicone mold sphere 20mm ball × 2
    PADICO PDC403248 Silicone mold sphere 20mm ball × 2
    Finally, a silicone mold that makes almost a sphere is born.
    Classification of the Hazardous  Non-dangerous goods 
    from S$19.99
    Min. 5 days
  32. Soft mold anchor charm for resin craft
    KAMESHIMA Soft mold anchor charm for resin craft
    from S$16.99
    Min. 4 days
  33. UV Light for EIGER Pro 375
    EIGERTOOL UV Light for EIGER Pro 375
    It is a UV light that hardens the curing agent with ultraviolet rays. For various restorations from crafts to hobbies! It can be widely used for cord repair of digital devices, hole filling of pipes, lip repair of lures, etc. Eiger PRO specification UV curing agent is a liquid plastic that remain... Read More
    Diameter x length (mm)  19×140  Wavelength (nm)  375  Suitable Battery  AAA batteries x 2 (sold separately)  Mass (g)  Approximately 60 (including batteries) 
    from S$58.99
    Min. 5 days
  34. Resin Craft File Set
    KIYOHARA Resin Craft File Set
    A set of 2 files that is convenient for polishing small parts of resin works.
    Material  Copper etc. 
    from S$6.39
    Min. 7 days
  35. PDC403245 UV Resin Coating Agent HOSHINO SHIZUKU Soft Type 25g
    PADICO PDC403245 UV Resin Coating Agent HOSHINO SHIZUKU Soft Type 25g
    An evolved one-component resin that cures with both LED and UV lights.
    Classification of the Hazardous  Non-dangerous goods 
    from S$21.99
    Min. 2 days
  36. Sphere Silicone Mold for Resin
    Artec Sphere Silicone Mold for Resin
    A silicone mold that can make 3 size spheres. Completed size: Large / approx. 25 mm, Medium / approx. 20 mm, Small / approx. 15 mm. Since it is silicone, it is soft and easy to remove after the resin has hardened. (* Silicone mold only sold. Resin and materials are not included.)
    Dimension (mm)  93×46×29  Set Contents  Body x 1  Packaging  In PP bag  Material  Silicon 
    from S$3.59
    Min. 4 days
  37. Super Resin UV Crystal Lamp 9W2
    Craft Gallery Super Resin UV Crystal Lamp 9W2
    Power Cable (m)  1.9  Voltage (V)  100 (50 / 60Hz shared)  Dimension (mm)  262×87×107  Wavelength (nm)  365  watt  Mass (g)  Approximately 746 (including power cord)  Color  Gray  Material  PP 
    from S$58.99
    Min. 8 days
  38. Perforated Plate Silicone Resin Mold
    Artec Perforated Plate Silicone Resin Mold
    A silicone mold packed with 7 types of resin molds. It is a convenient silicone mold that can be pre-drilled so that you do not have to make a hole after curing the resin. It is perfect when you want to thread a string such as a necklace or key chain. Since it is silicone, it is soft and easy to ... Read More
    Dimension (mm)  90×80×9  Set Contents  Body x 1  Packaging  In PP bag  Material  Silicon 
    from S$3.59
    Min. 4 days
  39. UV Resin Clear 10g
    Artec UV Resin Clear 10g
    Can also be used as a finishing coating
    Dimension (mm)  About 27 x 72  Packaging  Bag with zipper  Set Contents  Body x 1  Material  UV curable resin 
    from S$6.69
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 79

Set Ascending Direction