Punching / Engraving / Grommets
Other Related Pages
- EARTH MAN With automatic center punch gripNo need to hit with a hammer! Just push with one hand to hit easily! With strength adjustment function. Easy-to-use ball grip! Prevents rolling For positioning of drilling workMaterial (Main Unit) Brass material (blade edge) Chromium vanadium steel Material (Grip) Polypropylene
- TRUSCO Punch bodyIt can be used for all sizes of 4, 5, 7, 8, 10, 12, and 15 mm by attaching an optional replacement piece. Can be used for double-sided eyelets made of aluminum, brass, and stainless steel. You can attach double-sided eyelets just by hitting them with a mallet or a plastic hammer. * Cannot be used... Read MoreRemark Punch body Mass (g) 16 Trusco Part No. 258-3780
- RENNSTEIG Rivet HeaderA rivet header made of high quality steel. Demonstrates outstanding durability and high workability. Temporary fixing of holes in the iron plate, etc.2018 Trusco page 4 1938 Material Chromium vanadium steelfrom S$10.99Min. 2 days
- URATANI Heiss Precision Combination Engraved Letter Set (26)Type Alphabet stamp setfrom S$299.90Min. 2 days
- RENNSTEIG Set of 6 parallel pin punchesA parallel pin punch made of high quality steel. Demonstrates outstanding durability and high workability. Temporary fixing of holes in the iron plate, etc.Specification With hand guard Material Chrome vanadium steel, hand guard: resin Type Octagon bodyfrom S$64.99Min. 3 days
- FAMILY TOOL Double-sided eyelet 4mm (# 300)The size after double-sided caulking is about 4 mm.Thickness (mm) Up to about 2.0from S$3.49Min. 2 days
- ESCO 2.0-8. 0mm / 6-piece parallel pin punch (with grip)With a grip, it suppresses the vibration and impact of hitting.Tip Diameter (mm) 2・3・4・5・6・8 Specification Chromium vanadium steelfrom S$299.90Min. 4 days
- MonotaRO Pin Punch SetA convenient tool for punching knock pins. * Do not use for anything other than its intended purpose.Material Chrome vanadium steel
- TRUSCO Double-Sided Grommet AluminumIt does not rust easily, and the double-sided eyelets are made of a softer material than brass or stainless steel, so it is excellent for continuous work such as pliers. For repairing and reinforcing holes in belts, curtains, blue sheets, aprons and bagsMaterial Aluminum (A1100P)
- MonotaRO Punch SetA frequently used 9 size set that is convenient for drilling holes in belts and leather. For drilling holes in leather, cloth, and paper, leather crafts, and handicrafts. * Please use on a solid and hard base so that the force will not be dispersed when hitting. * Because it is a knife, please ha... Read MoreMaterial S45C Hardness HRC 42~48 Set Contents 3、4、5、6、7、8、9、10、12mm
- MonotaRO Engraving set numbers9-piece set with engraved numbers. 6 and 9 are shared. Affordable and ideal for DIY. Stamping on metal plates such as iron, copper, and aluminum * Do not use for any other purpose.Type of Letter Numbers Surface Treatment Sandblasting Material CR-V Hardness HRC 58~62 Contents of Set 0, 1, 2, 3, 4, 5, 6, 7, 8 (9 pcs set)
- MonotaRO Center Punch* Do not use for anything other than its intended purpose.Width (mm) 9.5 Tip Diameter (mm) 4 Overall Length (mm) 120 Material Spring steel SUP10
- GISUKE (Takagi) Drilling punchYou can make holes and make disks. Special shape design that makes it easy to remove cutting debris. Leather / paper / vinyl / rubber / brass plate (0.2 mm or less) / aluminum plate (0.2 mm or less) / copper plate (0.2 mm or less) / aluminum mesh (wire diameter 0.2 mm or less) / brass mesh (wire ... Read More
- MonotaRO Ping punchIt can be used for punching knock pins and for extracting and inserting roll pins and parallel pins. * Do not use for anything other than its intended purpose.Overall Length (mm) 150 Material Spring steel SUP10
- MonotaRO Stamp Set Alphabet27-piece set with English engraving. Affordable and ideal for DIY. Stamping on metal plates such as iron, copper, and aluminum * Do not use for any other purpose.Hardness HRC 58~62 Type of Letter Alphabet Contents of Set A~Z, & (27 pieces) Material CR-V Surface Treatment Sandblasting
- TRUSCO Belt PunchSince the cutting edge is made thin, it cuts well. It is a shape that makes it easy for scraps to come out. The special quenching process achieves both sharpness and cost at a high level. The surface treatment is black dyed (Parker finish). Drilling holes in belts, leather, vinyl, rubber, paper, ... Read MoreMaterial Carbon steel
- TRUSCO Double-Sided Grommet BrassIt is a material with excellent strength compared to aluminum. It is decorative and suitable for repairing, reinforcing, and manufacturing document binding, stationery, bags, shoes, etc.Material Brass
- Mokuba Pin PunchCarbon tool steel is used and high frequency processing is performed. Ideal for pulling out taper pins, spring pins, etc.Overall Length (mm) 150 Shape Octagon axis
- Mokuba Center punchA must-have for accurate drilling. Center hit. Drilling punching for cylindrical and irregular shapes.
- TRUSCO Double-Sided Grommet Punch Pliers TypeAs it is a plier type, it is excellent for continuous work. For reinforcing holes in bags, curtains, clothing, etc. * A special pigeon coma is required for use. Hatomekoma is not included, so please purchase it separately.Mass (g) 275 Trusco Part No. 380-4208 Material (Grip) Elastomer Material (Main Unit) Steel
- MonotaRO Punch Pliers Rotary DrillingYou can easily make holes in leather and fibers. By rotating the dial of the head according to the number, you can select the hole size from 6 types. (2.0 / 2.5 / 3.0 / 3.5 / 4.0 / 4.5mm) Dust that collects inside the dial can be easily cleaned by removing the dial. For drilling holes in leather,... Read MoreDrilling Diameter (Φmm) 2.0/2.5/3.0/3.5/4.0/4.5 Mass (g) About 336 Overall Length (mm) About 225 Material Steel, ABS, brass
- SK (Niigata Seiki) Leather PunchFor drilling leather crafts and handicrafts of leather, cloth and paperMaterial Carbon steel for machine structure (SC) Hardness HRC over 50
- SK (Niigata Seiki) Center PunchTip hardened, rust-resistant plating finish. For marking before marking work or drilling with a drill.Material Carbon tool steel (SC) chrome plating
- TRUSCO Punch SetSince the cutting edge is made thin, it cuts well. It is a shape that makes it easy for scraps to come out. It is convenient for storage and management because it summarizes frequently used sizes. The special quenching process achieves both sharpness and cost at a high level. The surface treatmen... Read MoreMaterial Carbon steel Finish Black dyed (Parker finish)
- SK (Niigata Seiki) Hexagon Belt Punch for LeatherIt can be used by attaching it to the charging drill driver of the 6.35 mm chuck. Efficient drilling is possible because the rotational force of the power tool is used. For drilling leather crafts and handicrafts of leather, cloth and paperHardness HRC 46~48 Width Across Flats (mm) 6.35 Material Carbon steel for machine structure (SC)
- TRUSCO Hand Stamped Individual Stamp LettersThe carving is deeper than other companies' products and the shank is thick, so beautiful characters are engraved and it is a very long-lasting engraving.Material Carbon steel (S45C) tip quenching
- TRUSCO Ping Punch Set (8 pieces)Ideal for removing taper pins and spring pins. For pulling out taper pins, spring pins, etc.Tip hardness HRC50±2(TPP25、TPP30)、HRC56±2(TPP40~100) Trusco Part No. 366-9076 Mass (g) 650 Set Contents (mm)2.5、3.0、4.0、5.0、6.0、7.0、8.0、10.0 Hardness Impact surface hardness: HRC38-46
- TRUSCO Numbers Stamp SetThe carving is deeper than other companies' products and the shank is thick, so beautiful characters are engraved and it is a very long-lasting engraving.Material / Finish S45C tip hardening Type of Letter Numbers
- TRUSCO Replacing Attachment Die for Double-Sided Grommet Punch* A special tool (THP-P or THP-PH) is required for installation, and a belt punch and hammer are required for pretreatment (drilling).Suitable Tool THP-P THP-PH Material Free cutting steel Included Accessories 1 stick
- TRUSCO Replacing Attachment Die for Double-Sided Grommet PunchReplacement piece for THP-PH (double-sided eyelet punch) and THP-P (punch body).Included Accessories 1 stick
- DOGYU Stone Splitting WedgeUsed for rough splitting of granite, etc. * Please wear protective glasses when using.
- LIGHT SEIKI Hexagonal leather bitIdeal for drilling holes in carpets, cloths, wallpaper, etc. or rubber. It does not entrain chips such as specially shaped carpets that are different from ordinary drills. It has a beautiful finish with very few chips. Equipment, electricity, interior work related. Leather, rubber, paper, gypsum ... Read MoreOverall Length (mm) 70 Material Carbon steel Shank Diameter (Φmm) 6.35
- PLUS (Stationey) HatomeEyelet studs for eyelet punch 30-457. Outer diameter: Φ about 8mm Hole diameter: Φ about 5 mm Quantity: Approximately 250 pieces per boxOuter Diameter (Φmm) About 8 Hole Diameter (Φmm) About 5 Material Made of brass
- TRUSCO Double-Sided Grommet Stainless SteelIt does not rust easily and has excellent strength. (It has better strength than aluminum and brass.) For repairing and reinforcing holes in seats, hoods, and tents.Material Stainless steel (SUS304)
- SK (Niigata Seiki) Hex shaft peel punch setA set of frequently used sizes For drilling leather crafts and handicrafts of leather, cloth and paperHardness HRC 46~48 Material Carbon steel for machine structure (SC)
- MonotaRO Cloth Case for Punch SetA cloth case exclusively for Monotaro's punch set PS9. For carrying a punch. * Do not use for any purpose other than its intended purpose.Number of Storage (pieces) 9 Material Canvas
- FAMILY TOOL Large RivetIt can be reinforced by using it for laminating or sewing parts such as leather and cloth. For repairing and reinforcing leather and fabric products.Head Diameter (Φmm) 9
Filter by categories