All Category

Punching

A punch is a tool used to make holes in a workpiece. A punch used to make a through hole in a sheet-like workpiece such as leather, cloth, or paper is called a punch. Various sizes will be found according to the size of the hole. There is also a special punch that is used to punch holes to determine the position of the cutting edge of the drill before drilling. Choose a center punch that matches the size of the cutting edge of your drill.
View : Grid List
Filter

Items 1 - 40 of 1049

Set Ascending Direction
  1. With automatic center punch grip
    EARTH MAN With automatic center punch grip
    No need to hit with a hammer! Just push with one hand to hit easily! With strength adjustment function. Easy-to-use ball grip! Prevents rolling For positioning of drilling work
    Material (Main Unit)  Brass  material (blade edge)  Chromium vanadium steel  Material (Grip)  Polypropylene 
    Rating:
    89%
    from S$18.99
    Min. 2 days
  2. 24mm leather punch
    ESCO 24mm leather punch
    Esco Part No.  EA576H-24A 
    from S$36.99
    Min. 2 days
  3. 2.0-8. 0mm / 6-piece parallel pin punch (with grip)
    ESCO 2.0-8. 0mm / 6-piece parallel pin punch (with grip)
    With a grip, it suppresses the vibration and impact of hitting.
    Tip Diameter (mm)  2・3・4・5・6・8  Specification  Chromium vanadium steel 
    from S$279.90
    Min. 4 days
  4. Pin Punch Set
    MonotaRO Pin Punch Set
    A convenient tool for punching knock pins. * Do not use for anything other than its intended purpose.
    Material  Chrome vanadium steel 
    Rating:
    82%
    from S$26.99
    Min. 2 days
  5. Punch Set
    MonotaRO Punch Set
    A frequently used 9 size set that is convenient for drilling holes in belts and leather. For drilling holes in leather, cloth, and paper, leather crafts, and handicrafts. * Please use on a solid and hard base so that the force will not be dispersed when hitting. * Because it is a knife, please ha... Read More
    Material  S45C  Hardness HRC  42~48  Set Contents  3、4、5、6、7、8、9、10、12mm 
    Rating:
    64%
    from S$12.99
    Min. 2 days
  6. Center Punch
    MonotaRO Center Punch
    * Do not use for anything other than its intended purpose.
    Width (mm)  9.5  Tip Diameter (mm)  Overall Length (mm)  120  Material  Spring steel SUP10 
    Rating:
    76%
    from S$3.39
    Min. 2 days
  7. Drilling punch
    GISUKE (Takagi) Drilling punch
    You can make holes and make disks. Special shape design that makes it easy to remove cutting debris. Leather / paper / vinyl / rubber / brass plate (0.2 mm or less) / aluminum plate (0.2 mm or less) / copper plate (0.2 mm or less) / aluminum mesh (wire diameter 0.2 mm or less) / brass mesh (wire ... Read More
    Rating:
    86%
    from S$4.19
    Min. 2 days
  8. Ping punch
    MonotaRO Ping punch
    It can be used for punching knock pins and for extracting and inserting roll pins and parallel pins. * Do not use for anything other than its intended purpose.
    Overall Length (mm)  150  Material  Spring steel SUP10 
    Rating:
    81%
    from S$3.89
    Min. 2 days
  9. Belt Punch
    TRUSCO Belt Punch
    Since the cutting edge is made thin, it cuts well. It is a shape that makes it easy for scraps to come out. The special quenching process achieves both sharpness and cost at a high level. The surface treatment is black dyed (Parker finish). Drilling holes in belts, leather, vinyl, rubber, paper, ... Read More
    Material  Carbon steel 
    Rating:
    77%
    from S$5.29
    Min. 2 days
  10. Pin Punch
    Mokuba Pin Punch
    Carbon tool steel is used and high frequency processing is performed. Ideal for pulling out taper pins, spring pins, etc.
    Overall Length (mm)  150  Shape  Octagon axis 
    Rating:
    96%
    from S$4.99
    Min. 2 days
  11. Center punch
    Mokuba Center punch
    A must-have for accurate drilling. Center hit. Drilling punching for cylindrical and irregular shapes.
    Rating:
    91%
    from S$4.79
    Min. 2 days
  12. Rotary Hole Punch Pliers
    MonotaRO Rotary Hole Punch Pliers
    You can easily make holes in leather and fibers. By rotating the dial of the head according to the number, you can select the hole size from 6 types. (2.0 / 2.5 / 3.0 / 3.5 / 4.0 / 4.5mm) Dust that collects inside the dial can be easily cleaned by removing the dial. For drilling holes in leather,... Read More
    Drilling Diameter (Φmm)  2.0/2.5/3.0/3.5/4.0/4.5  Mass (g)  About 336  Overall Length (mm)  About 225  Material  Steel, ABS, brass 
    Rating:
    93%
    from S$16.99
    Min. 2 days
  13. Leather Punch
    SK (Niigata Seiki) Leather Punch
    For drilling leather crafts and handicrafts of leather, cloth and paper
    Material  Carbon steel for machine structure (SC)  Hardness HRC  over 50 
    Rating:
    75%
    from S$4.49
    Min. 2 days
  14. Center Punch
    SK (Niigata Seiki) Center Punch
    Tip hardened, rust-resistant plating finish. For marking before marking work or drilling with a drill.
    Material  Carbon tool steel (SC) chrome plating 
    Rating:
    84%
    from S$4.39
    Min. 2 days
  15. Punch Set
    TRUSCO Punch Set
    Since the cutting edge is made thin, it cuts well. It is a shape that makes it easy for scraps to come out. It is convenient for storage and management because it summarizes frequently used sizes. The special quenching process achieves both sharpness and cost at a high level. The surface treatmen... Read More
    Material  Carbon steel  Finish  Black dyed (Parker finish) 
    Rating:
    88%
    from S$29.99
    Min. 2 days
  16. Hexagon Belt Punch for Leather
    SK (Niigata Seiki) Hexagon Belt Punch for Leather
    It can be used by attaching it to the charging drill driver of the 6.35 mm chuck. Efficient drilling is possible because the rotational force of the power tool is used. For drilling leather crafts and handicrafts of leather, cloth and paper
    Hardness HRC  46~48  Width Across Flats (mm)  6.35  Material  Carbon steel for machine structure (SC) 
    Rating:
    79%
    from S$6.19
    Min. 2 days
  17. Ping Punch Set (8 pieces)
    TRUSCO Ping Punch Set (8 pieces)
    Ideal for removing taper pins and spring pins. For pulling out taper pins, spring pins, etc.
    Tip hardness  HRC50±2(TPP25、TPP30)、HRC56±2(TPP40~100)  Trusco Part No.  366-9076  Mass (g)  650  Set Contents  (mm)2.5、3.0、4.0、5.0、6.0、7.0、8.0、10.0  Hardness  Impact surface hardness: HRC38-46 
    Rating:
    78%
    from S$39.99
    Min. 2 days
  18. Hex shaft peel punch set
    SK (Niigata Seiki) Hex shaft peel punch set
    A set of frequently used sizes For drilling leather crafts and handicrafts of leather, cloth and paper
    Hardness HRC  46~48  Material  Carbon steel for machine structure (SC) 
    Rating:
    90%
    from S$19.99
    Min. 2 days
  19. Cloth Case for Punch Set
    MonotaRO Cloth Case for Punch Set
    A cloth case exclusively for Monotaro's punch set PS9. For carrying a punch. * Do not use for any purpose other than its intended purpose.
    Number of Storage (pieces)  Material  Canvas 
    Rating:
    73%
    from S$6.29
    Min. 2 days
  20. Leather punch
    Takashiba Gimune Mfg. Leather punch
    Please use it for drilling holes and making disks for leather, vinyl, rubber, thin boards, matsutake mushrooms, etc. After laying a punch stand, hard wood, hard rubber, etc. underneath, keep the punch vertical and hit the punch head with a mallet. For re-sizing belts, leather crafts, drilling hol... Read More
    Rating:
    46%
    from S$4.99
    Min. 2 days
  21. Leather punch sharpener
    Takashiba Gimune Mfg. Leather punch sharpener
    Deburring easily! For sharpening blades with a leather punch diameter of 3 mm to 17 mm! Also for deburring the inner and outer surfaces of iron, PVC pipes, iron plates, etc.! For sharpening the blade of a leather punch. For deburring the inner and outer surfaces of iron, PVC pipes, iron plates, etc.
    Corresponding size (Φmm)  3~17 
    Rating:
    80%
    from S$19.99
    Min. 2 days
  22. Ping punch
    TRUSCO Ping punch
    Ideal for removing taper pins and spring pins. For pulling out taper pins, spring pins, etc.
    Tip hardness  HRC50±2(TPP25、TPP30)、HRC56±2(TPP40~100)  Overall Length (mm)  150  Hardness  Impact surface hardness: HRC38-46  Material  Nickel / chromium / molybdenum steel 
    Rating:
    100%
    from S$4.49
    Min. 2 days
  23. Pin punch set
    SIGNET Pin punch set
    A set of 6 parallel pin punches with a beautiful mirror-plated finish. Octagonal body total length 115-180 mm with holder * Not sold separately.
    Set Contents  2、3、4、5、6、8mm  Material  Chromium vanadium steel 
    Rating:
    100%
    from S$36.99
    Min. 2 days
  24. Center Punch
    TRUSCO Center Punch
    A must-have for accurate drilling. Center hit. Drilling punching for cylindrical and irregular shapes.
    Material  Nickel / chromium / molybdenum steel  Tip hardness  HRC56±2  Hardness  Impact surface hardness: HRC38-46 
    Rating:
    70%
    from S$3.99
    Min. 2 days
  25. Board for Punching
    H.H.H. Mfg. Board for Punching
    If you punch it out on this table, it will come out cleanly without damaging the punch.
    Thickness (mm)  10  Dimension (mm)  100×150 
    Rating:
    80%
    from S$27.99
    Min. 2 days
  26. Rotary Punch Plier
    KNIPEX Rotary Punch Plier
    For drilling holes in leather, fiber, and plastic materials. By rotating the head, you can select the hole from 6 different sizes. (2.0 / 2.5 / 3.0 / 3.5 / 4.0 / 5.0 mm). With open spring and lock lever. The surface of the body is powder coated as a rust preventive treatment. The material of the ... Read More
    Mass (g)  251  Overall Length (mm)  220  Trusco Part No.  446-9526  Drilling Diameters (Φmm)  2.0/2.5/3.0/3.5/4.0/5.0 
    Rating:
    92%
    from S$48.99
    Min. 2 days
  27. 5-Piece Punch Set
    H.H.H. Mfg. 5-Piece Punch Set
    A set of frequently used sizes. Usage: Drilling holes in belts, leather, vinyl, paper, rubber, etc.
    Set Contents  5、6、8、9、13mm  Material  S45C material 
    Rating:
    100%
    from S$26.99
    Min. 2 days
  28. Yose Punch(Aligning Punch)
    Mokuba Yose Punch(Aligning Punch)
    With safety rope hole. Completely heat treated. For aligning steel bolt holes
    Rating:
    87%
    from S$15.99
    Min. 2 days
  29. Drilling punch
    iHelp Drilling punch
    Drilling pins (holes) for leather belts and work belts. Drilling holes for documents and cardboard (cardboard). Drilling pilot holes for eyelets on vinyl sheets. The sharpness is improved by quenching the original cutting edge.
    Rating:
    67%
    from S$3.59
    Min. 2 days
  30. Belt punch stand
    TRUSCO Belt punch stand
    It can be pulled out cleanly without damaging the punch blade. Underlay when using punch.
    Mass (kg)  0.155  Thickness (mm)  10  Height (mm)  100  Width (mm)  150  Trusco Part No.  490-1819  Material  Polyethylene 
    Rating:
    93%
    from S$23.99
    Min. 2 days
  31. Blister Packed Punch
    H.H.H. Mfg. Blister Packed Punch
    The size is engraved on the main body. Usage: Drilling holes in belts, leather, vinyl, paper, rubber, etc.
    Material  S45C material 
    Rating:
    86%
    from S$4.19
    Min. 2 days
  32. Standard punch
    TRUSCO Standard punch
    Accurate drilling is possible It is used for drilling round holes in steel materials such as bridges and steel frames by setting it on a dedicated large punching machine.
    Material / Finish  SK-5  Tempered Hardness  HRC57 
    Rating:
    88%
    from S$36.99
    Min. 2 days
  33. Precision micro punch
    Strong Tool Precision micro punch
    Material  Axis: Steel, punch: SWC spring steel  Overall Length (mm)  100 
    Rating:
    100%
    from S$6.49
    Min. 2 days
  34. Tip piece for screw punch
    Nonaka Manufacturing Tip piece for screw punch
    Tip piece for screw punch. Drilling
    Rating:
    100%
    from S$12.99
    Min. 2 days
  35. Pin Punch Set 8pcs
    Mokuba Pin Punch Set 8pcs
    Ideal for removing taper pins and spring pins.
    Set Contents  (mm)2.5、3.0、4.0、5.0、6.0、7.0、8.0、10.0  Mass (g)  640  Material  Carbon steel for machine structure  Trusco Part No.  327-1374  Hardness  54±1 
    Rating:
    80%
    from S$46.99
    Min. 2 days
  36. Joseponchi
    FK Joseponchi
    It is used for hole alignment before fixing by inserting rivets and bolts between iron plates made with punches, dies, etc.
    Dimension L3 (mm)  25  Hardness  HRC40  Type  Joseponchi  Material  S45C 
    Rating:
    85%
    from S$14.99
    Min. 2 days
  37. 20mm leather punch
    ESCO 20mm leather punch
    Esco Part No.  EA576H-20A 
    Rating:
    100%
    from S$24.99
    Min. 2 days
  38. Precision micro punch assembly
    Strong Tool Precision micro punch assembly
    Trusco Part No.  859-1993  Overall Length (mm)  100  Material  Axis: Steel, punch: SWC spring steel 
    Rating:
    80%
    from S$27.99
    Min. 2 days
  39. Parallel Pin Punch Round Body
    PB SWISS TOOLS Parallel Pin Punch Round Body
    The material is PB's original special spring steel that promises high strength and long life. The nickel chrome plating on the surface makes it easy to grip, has excellent rust resistance, and has a beautiful appearance. The grip is knurled to prevent slipping.
    Tip hardness  HRC58°  Hardness HRC  (Striking part) 45 °-48 ° 
    Rating:
    100%
    from S$13.99
    Min. 2 days
  40. Center punch
    TONE Center punch
    Used for positioning of drilling. Hit the head with a hammer to mark the work. Comes with a resin grip that fits in your hand. For positioning of drilling.
    Overall Length (mm)  126  Tip Diameter (Φmm)  Mass (g)  45  Width (mm)  Trusco Part No.  818-8761 
    Rating:
    100%
    from S$15.99
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 1049

Set Ascending Direction