Pin Punches
Other Related Pages
MonotaRO Ping punchIt can be used for punching knock pins and for extracting and inserting roll pins and parallel pins. * Do not use for anything other than its intended purpose.Material Spring steel SUP10- Mokuba Pin PunchCarbon tool steel is used and high frequency processing is performed. Ideal for pulling out taper pins, spring pins, etc.Shape Octagon axis
- TRUSCO Ping Punch Set (8 pieces)Ideal for removing taper pins and spring pins. For pulling out taper pins, spring pins, etc.Set Contents (mm)2.5、3.0、4.0、5.0、6.0、7.0、8.0、10.0 Mass (g) 650 Hardness Impact surface hardness: HRC38-46 Tip hardness HRC50±2(TPP25、TPP30)、HRC56±2(TPP40～100)
- TRUSCO Ping punchIdeal for removing taper pins and spring pins. For pulling out taper pins, spring pins, etc.Material Nickel / chromium / molybdenum steel Hardness Impact surface hardness: HRC38-46 Tip hardness HRC50±2(TPP25、TPP30)、HRC56±2(TPP40～100)
- Strong Tool Precision micro punchMaterial Axis: Steel, punch: SWC spring steel
- Mokuba Pin Punch Set 8pcsIdeal for removing taper pins and spring pins.Set Contents (mm)2.5、3.0、4.0、5.0、6.0、7.0、8.0、10.0 Mass (g) 640 Hardness 54±1
- FK JoseponchiIt is used for hole alignment before fixing by inserting rivets and bolts between iron plates made with punches, dies, etc.Type Joseponchi Material S45C Hardness HRC40
- Strong Tool Precision micro punch assemblyMaterial Axis: Steel, punch: SWC spring steel
- PB SWISS TOOLS Parallel Pin Punch Round BodyThe material is PB's original special spring steel that promises high strength and long life. The nickel chrome plating on the surface makes it easy to grip, has excellent rust resistance, and has a beautiful appearance. The grip is knurled to prevent slipping.Hardness HRC (Striking part) 45 °-48 ° Tip hardness HRC58°
- KTC Knock pin punchIt is a new design that is different from the conventional knock pin punch. The main body has a hexagonal shape that makes it difficult to roll. In addition, chucking rubber is effective for improving workability. * Please wear protective goggles when working. * Please use the one that matches th... Read More
- TONE Pin PunchIdeal for inserting and removing parallel pins, spring pins, and taper pins. Uses a grip that softens the shock when hitting. * The plastic handle is not for insulation. Do not use it for things with electricity. * Wipe off the oil from the holes in the snap ring and the tip of the pliers before ... Read More
- PB SWISS TOOLS Parallel pin punchThe material is PB's original special spring steel that promises high strength and long life. The nickel chrome plating on the surface makes it easy to grip, has excellent rust resistance, and has a beautiful appearance.Hardness HRC (Striking part) 45 °-48 ° Tip hardness HRC58°
- Mokuba Ping punchIdeal for removing taper pins and spring pins.Hardness 54±1
-
- SK (Niigata Seiki) Ping punchNon-slip knurling on the grip For driving / extracting / nailing of parallel pins, taper pins, and spring pins, and nailing at corners / edges, etc.Material Carbon tool steel (SK) Hardness HRC 50～52from S$16.99Min. 2 days
-
-
- KTC Knock pin punch setIt is a convenient set with one main size. It is a new design that is different from the conventional knock pin punch. The main body has a hexagonal shape that makes it difficult to roll. In addition, chucking rubber is effective in improving workability. * Please wear protective goggles when wor... Read Morefrom S$76.99Min. 2 days
-
-
-
-
-
- PB SWISS TOOLS Parallel pin punch with handleThe grip suppresses shock and vibration to the hand. Ideal for driving in places where the shaft length is long and deep.Body Diameter (Φmm) 10from S$48.99Min. 2 days
-
- ESCO 2.0mm parallel punchMaterial Chromium vanadium steel Shank Diameter (Φmm) 10from S$10.99Min. 2 days
- PB SWISS TOOLS Tapered pin punchThe material is PB's original special spring steel that promises high strength and long life. The nickel chrome plating on the surface makes it easy to grip, has excellent rust resistance, and has a beautiful appearance. The grip is knurled to prevent slipping.Hardness HRC (Striking part) 45 °-48 ° Tip hardness HRC58°from S$15.99Min. 3 days
-
-
- O.H. Industrial Knockout pinSince the center is thick, the whole does not bend. You can choose from 40 mm and 70 mm according to the mold size. When setting fragile carbide, attach a soft head to minimize the impact. When pulling out dies and punch parts. It is used with a hammer when maintaining the mold, removing punch pa... Read MoreRoHS directive (corresponding to 10 substances) Correspondence
-
- PB SWISS TOOLS Rainbow parallel pin punch octagonal trunkSize recognition is possible for each color.Body Diameter (Φmm) 10from S$29.99Min. 3 days
-
- Mokuba Ping punchIdeal for removing taper pins and spring pins.Mass (g) 80 Hardness 54±1 Axis Octagon axis Nominal Diameter (Φmm) [Tip] 2.0from S$6.19Min. 2 days
-
-
- Strong Tool Precision micro punchFor extracting ultra-fine parallel pins, spring pins, and taper pins! For removing various pins such as precision equipment, electronic equipment, audio, personal computers, mechanical models, radio-controlled models, and plastic hobby!from S$8.19Min. 4 days
-
-
-
