Other Wrenches

For fast rotation of all screws and hanging bolts (screw diameter W3 / 8) The head part is locked with three rollers without crushing the screw thread. The simple ratchet mechanism allows for quick rotation. Movable handle that is convenient for work in narrow spaces and short screws. Smooth fast... Read More

Used to open and close the lid of drums. Compatible with various lids.

One-touch work is possible.

Compatible with various drum lids. A 3/4 inch and 2 inch wrench for nails.

With a 4-step switching slide bar of about 230 mm to 410 mm, it is easy to install and remove nuts and bolts in narrow places that are out of reach! For tightening and loosening bolts and nuts that are out of reach

The grip part of the conventional product has been improved to make it easier to grip. In the pressure test, the pressure is 3 times that of the conventional product (compared to the manufacturer). Attach it to an oil can and use it as a cock. It can be used for non-flammable, highly viscous oils... Read More

Oil in general, lever type For 200L drums

A must-have tool for pipe remodeling that allows broken pipes to be easily pulled out. When replacing an angle water stopcock, the rusted and unbroken pipe screw part can be easily removed with a simple operation. Plated decorative pipes that you do not want to scratch can also be tightened from ... Read More

You can easily take out the rusted and unbroken piping screw part with a simple operation, such as when replacing the angle stopper. Plated decorative pipes that you do not want to scratch can also be tightened from the inside. Twin type of 15A and 20A. Compact design without tip reamer makes it ... Read More

Ideal for loosening and tightening bolts and nuts where tools normally cannot be inserted. It can be used by attaching it to a torque wrench. * If attached to a torque wrench, an error will occur by the effective length of the offset glasses adapter, so it is necessary to correct it by calculation.

You can turn 9 to 22 mm bolts and nuts with this one. Bolts and pipes with worn corners are also OK!

Meter replacement work is greatly speeded up

Ideal for tightening and loosening nuts in narrow spaces such as under the washbasin. The handle is a telescopic type, and the length can be adjusted with one touch.

When constructing plumbing for washbasins and washbasins! Ideal for narrow spaces that are difficult to maintain! Three-stage expansion and contraction of the handle (total length: 297 to 472 mm), compact head, swing angle 180 °, crossbar with hexagonal top (13 mm) * Cannot be used for round pipes.

Compatible with all electric, charging, and air drivers. For strong and long-life all screws and threaded rods dedicated foam ties, cable rack hanging bolts and all screws

The compact head and ratchet drive make it easy to work in tight spaces, and the forged product is tough and has excellent load resistance and durability. Since the handle part expands and contracts in 3 stages, it can be used by adjusting the length even in places with obstacles such as piping. ... Read More

Ideal for temporary frame work Peacon turn, foam tie nut turn, with shino * For the foam tie method that uses a single pipe.

The ratchet mechanism allows easy operation even in narrow spaces. Work efficiency is improved. The size adjustment function does not require many tools. It fits perfectly to the width of the nut and can be tightened securely.

This one is compatible with 17-27mm, 11 / 16-1 1/16 inch!

You can turn it without crushing the screw thread! Both turns are OK! The head part that grabs and turns all screws and hanging bolts is locked with three rollers without crushing the threads. It can be locked by turning either left or right. Movable handle that is convenient for work in narrow s... Read More

180 ° swing is possible. Ideal for work in narrow spaces such as brake pipes.

A convenient set that can be used for both a wash wrench and a sink wrench by simply replacing the head. The set includes a wash wrench body (SMW-1032H), a sink wrench body (SMW-3050H), and a handle body. Ideal for attaching / detaching water stopcocks / water supply pipe tightening nuts and bag ... Read More

A wrench that turns the header joint. (It can also be used for other purposes.) A spring is built into the upper jaw so that ratchet drive can be performed while holding the nut. Two sizes of fittings can be turned with one. A pull-up lever is provided on the upper chin. The upper jaw can be open... Read More

A simple wrench for faucet repair and installation.

A speed wrench that can be adjusted to any shape with a single touch and can be quickly worked by repetitive work with a spring. Since the head is small, it can be used even in a narrow space.

Regardless of millimeter or inch size, it grips bolts and nuts without play or backlash, so it does not damage the corners of bolts and nuts. With a special head action, it can be operated like a ratchet handle, and nuts can be tightened and loosened quickly. It can also be used for tightening an... Read More

You can tighten and attach / detach thumbscrew nut type sprinkler mounting brackets and hanging bands. The 13-side socket can be used not only for wing bolts but also for tightening and attaching / detaching hexagon bolts / nuts on opposite sides 13.

This one is compatible with 8-19mm and 11 / 32-3 / 4 inches!

No need to return! Ratchet mechanism makes it much easier! Can be used for both turnbuckles and hexagon nuts. Firmly fits the square turnbuckle. Easy to handle. Smooth opening and closing of nails. Easy to grip with a grip. For adjusting turnbuckles and fixing nuts! * Can only be used with square... Read More

It can be used for all manual pumps. For single-acting cylinders For hydraulic pumps

Make the bit part vertical and temporarily tighten it quickly, and when applying torque, lay the bit part sideways.

W-27 single item.