All Category

Other Sockets

View : Grid List
Filter

Items 1 - 40 of 178

Set Ascending Direction
  1. Socket for tapping (insertion angle 12.7)
    NAC (NAGAHORI INDUSTRY) Socket for tapping (insertion angle 12.7)
    It is a type for shaving work by attaching a standard tap to raise screws. Made of highly durable special steel, the price is reasonable. * Do not use the tool for any purpose other than its intended purpose.
    Square Drive (mm)  12.7  Overall Length (mm)  50  Included Accessories  Pin, ring, set screw  Material  Special steel 
    Rating:
    93%
    from S$36.99
    Min. 2 days
  2. Stud bolt setter
    Ko-Ken (Yamashita Industrial Lab) Stud bolt setter
    Square Drive (mm)  1/2"(12.7mm)SQ  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    100%
    from S$29.99
    Min. 2 days
  3. Stud Bolt Socket (Square Drive 12.7mm)
    NAC (NAGAHORI INDUSTRY) Stud Bolt Socket (Square Drive 12.7mm)
    Square Drive (mm)  12.7  Overall Length (mm)  50 
    Rating:
    100%
    from S$27.99
    Min. 2 days
  4. Replacement socket for ratchet glasses wrench
    NEGUROSU DENKO Replacement socket for ratchet glasses wrench
    Rating:
    100%
    from S$14.99
    Min. 2 days
  5. Socket adapter with double-ended bit
    STAR-M Socket adapter with double-ended bit
    Since the shaft is a double-headed bit, even if the shaft breaks, it can be handled by simply replacing the bit. Can also be used for sockets from other manufacturers (Drive 12.7 mm)! For tightening and loosening bolts and nuts in construction, civil engineering, electrical equipment, equipment, ... Read More
    Square Drive (mm)  12.7 (1/2 inch)  Insertion Hole Diameter (mm)  6.35  Overall Length (mm)  Socket adapter: 50, double-ended bit: 65  Mass (g)  Socket adapter: 62, double-ended bit: 13 
    Rating:
    100%
    from S$18.99
    Min. 2 days
  6. Socket with blade for peakon
    MITLOY Socket with blade for peakon
    Efficiently removes cement with a four-blade tip For removing peacon with cement * If depth is required (salt damage beacon), Bit Socket Long (EL-12L) has a total length of 155 mm and a depth of 110 mm.
    Dimension S (mm)  12  Dimension l1 (mm)  15  Dimension D (Φmm)  18  Dimension l2 (mm)  50  Mass (g)  73  Dimension L (mm)  95  Specification  Impact driver support 
    Rating:
    100%
    from S$14.99
    Min. 2 days
  7. Rebar puller
    Ko-Ken (Yamashita Industrial Lab) Rebar puller
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$89.99
    Min. 2 days
  8. Stud bolt socket (insertion angle 9.52mm)
    NAC (NAGAHORI INDUSTRY) Stud bolt socket (insertion angle 9.52mm)
    Used for implanting stud bolts with an impact wrench. After tightening is complete, rotate the impact wrench in the reverse direction and pull out only the socket with the bolts embedded. Socket for stat bolts Uses highly durable special steel and is reasonably priced.
    Overall Length (mm)  42  Square Drive (mm)  9.52 
    from S$22.99
    Min. 2 days
  9. Inner socket for shear wrench
    TONE Inner socket for shear wrench
    from S$129.90
    Min. 3 days
  10. Thumbscrew socket
    Ko-Ken (Yamashita Industrial Lab) Thumbscrew socket
    Square Drive (mm)  3/8"(9.5mm)SQ.  Trusco Part No.  811-7338  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$29.99
    Min. 2 days
  11. Shear wrench outer socket
    TONE Shear wrench outer socket
    from S$87.99
    Min. 3 days
  12. Bit holder socket
    MITLOY Bit holder socket
    Dimension D1 (Φmm)  12  Dimension D2 (Φmm)  13  Mass (g)  17  Dimension l (mm)  20  Dimension L (mm)  35  Dimension S (mm)  6.35  Square Drive (mm[inch])  6.35[1/4] 
    Rating:
    100%
    from S$26.99
    Min. 2 days
  13. Lock nut socket
    Ko-Ken (Yamashita Industrial Lab) Lock nut socket
    Square Drive (mm)  1/2"(12.7mm)SQ  Dimension D3 (Φmm)  22  Dimension D2 (Φmm)  27  Dimension D1 (Φmm)  28.5  Overall Length (mm)  72  Trusco Part No.  811-7661  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    100%
    from S$36.99
    Min. 6 days
  14. 3/8 "sq5. 5x6mm thumbscrew socket
    ESCO 3/8 "sq5. 5x6mm thumbscrew socket
    It can also be used for negative convex shapes such as socket slits for thumbscrews with two different width slits (grooves).
    Outer Diameter (mm)  21  Square Drive (inch)  3/8”  Overall Length (mm)  32  Dimension (mm)  5.5×6 
    from S$39.99
    Min. 4 days
  15. Slide socket
    Ko-Ken (Yamashita Industrial Lab) Slide socket
    Dimension L (mm)  45  Square Drive (mm[inch])  6.35[1/4]  RoHS directive (corresponding to 10 substances)  Correspondence  Square Drive (mm)  DIN3126 E6.3 
    from S$49.99
    Min. 6 days
  16. Stud setter set
    Ko-Ken (Yamashita Industrial Lab) Stud setter set
    Square Drive (mm)  1/2"(12.7mm)SQ  Trusco Part No.  811-8241  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$129.90
    Min. 6 days
  17. Lever socket
    TONE Lever socket
    Since the socket and reaction force receiver are integrated, it is lightweight and has excellent operability.
    from S$359.90
    Min. 4 days
  18. MKK twin socket
    MOTOKOMA MKK twin socket
    Ideal for steel frames, light sky, equipment work, etc. It can be used by attaching it to a commercially available impact driver. For temporary tightening.
    Rating:
    70%
    from S$18.99
    Min. 7 days
  19. Slide socket
    TOP KOGYO Slide socket
    A slide socket for both slide latches.
    Overall Length (mm)  70 
    from S$21.99
    Min. 2 days
  20. Socket for tap (insertion angle 9.52)
    NAC (NAGAHORI INDUSTRY) Socket for tap (insertion angle 9.52)
    It is a type for shaving work by attaching a standard tap to raise screws. Made of highly durable special steel, the price is reasonable.
    Overall Length (mm)  42  Mass (g)  60  Square Drive (mm)  9.52  Included Accessories  Pin, ring, set screw  Material  Special steel 
    Rating:
    100%
    from S$35.99
    Min. 2 days
  21. 1 / 4H Long nut setter (with slide magnet / protector)
    Ko-Ken (Yamashita Industrial Lab) 1 / 4H Long nut setter (with slide magnet / protector)
    Square Drive (mm[inch])  6.35[1/4]  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$84.99
    Min. 6 days
  22. 3/8 "(9.5mm) SQ. Adapter set
    Ko-Ken (Yamashita Industrial Lab) 3/8 "(9.5mm) SQ. Adapter set
    Square Drive (mm)  3/8"(9.5mm)SQ.  Mass (g)  460  Square Drive (mm[inch])  9.5 [3/8]  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$159.90
    Min. 5 days
  23. Fall prevention socket
    trad Fall prevention socket
    A convenient socket that uses a new mechanism "Breakpoint PAT." That will not fall or be lost even if the bit breaks. You can safely work in high places. If excessive force is applied due to overtorque, it will always break at the "break point" inside the cover, and the "... Read More
    from S$18.99
    Min. 3 days
  24. Nail replacement wrench socket 24mm
    SEK (Suekage Tool) Nail replacement wrench socket 24mm
    Material  Chrome vanadium steel  Trusco Part No.  853-1425  Mass (g)  94  Width Across Flats (mm)  24 
    from S$22.99
    Min. 6 days
  25. socket
    KOKUGO socket
    Has excellent chemical resistance and corrosion resistance. It is lightweight because it is made of all resin. Maximum working pressure: 0.8MPa Maximum operating temperature: + 80 ℃ For applications that require chemical resistance, or when metal fittings cannot be used. When you want to reduce w... Read More
    from S$75.99
    Min. 6 days
  26. 2-way socket for construction 17MM
    SEK (Suekage Tool) 2-way socket for construction 17MM
    Mass (g)  163  Width Across Flats (mm)  17  Material  Chrome vanadium steel  Trusco Part No.  853-1397 
    from S$24.99
    Min. 6 days
  27. Screw socket
    HASCO Screw socket
    from S$539.90
    Min. 4 days
  28. Socket for formwork For oval type (K type)
    MITLOY Socket for formwork For oval type (K type)
    Hold the oval foam tie and turn it. Oval type (K type) foam tie only
    Mass (g)  170  Dimension D (Φmm)  26  Dimension l (mm)  40  Dimension L (mm)  90  Specification  Impact driver support  Part No.  Oval type 
    from S$15.99
    Min. 7 days
  29. Architecture socket set of 5
    SEK (Suekage Tool) Architecture socket set of 5
    It can be used by attaching it to the handle for impact wrench and socket wrench. For tightening wing plate bolts, anchor bolts, etc. for construction
    Mass (kg)  1.3  Square Drive (mm)  12.7  Trusco Part No.  853-0772  Material  Chrome molybdenum steel 
    from S$109.90
    Min. 6 days
  30. Wrench for primary tightening
    TONE Wrench for primary tightening
    Rotation Speed at No Load (min-1[rpm])  110  Power Consumption (W)  1350  Applicable bolt size  High strength (S10T) 
    from S$3,299.00
    Min. 3 days
  31. Bolt wrench 3/8
    SEK (Suekage Tool) Bolt wrench 3/8
    Convenient for tightening and loosening dimension cutting bolts and light ceiling bolts. For work such as construction, civil engineering work, wooden construction, steel frame construction, etc., for tightening and loosening sizing bolts and light ceiling bolts
    Effective Length (mm)  24  Mass (g)  94  Material  Chrome vanadium steel  Trusco Part No.  774-6938  Overall Length (mm)  65  Shaft Length (mm)  6.35 
    from S$33.99
    Min. 32 days
  32. Socket for nail replacement wrench 22mm
    SEK (Suekage Tool) Socket for nail replacement wrench 22mm
    Material  Chrome vanadium steel  Trusco Part No.  853-1424  Mass (g)  79  Width Across Flats (mm)  22 
    from S$21.99
    Min. 6 days
  33. Nicosoke with socket adapter
    STAR-M Nicosoke with socket adapter
    [Two size sockets that are frequently used into one socket!] Two sizes of sockets that are frequently used have been combined into one socket. With a depth of 57 mm, you can firmly grasp bolts and nuts for tightening and loosening work. Since the shaft of the socket adapter is a double-headed bit... Read More
    Square Drive (mm)  12.7 (1/2 inch)  Socket shape  2 way 6 corner  Depth (mm)  57  Suitable Model  Impact driver (18V compatible) 
    from S$43.99
    Min. 4 days
  34. 2-way socket set for architecture
    SEK (Suekage Tool) 2-way socket set for architecture
    It can be used in two ways: straight (fixed) and swinging. It is a bit replacement type and is economical. Architectural hardware (hole-down hardware, brace plates, etc.) can be screwed with a square bit and the socket mounting nut can be tightened with this one. For construction, civil engineeri... Read More
    Material  Chrome vanadium steel  Trusco Part No.  853-0755  Mass (kg)  1.2 
    from S$129.90
    Min. 6 days
  35. Architecture socket 24mm
    SEK (Suekage Tool) Architecture socket 24mm
    Width Across Flats (mm)  24  Material  Chrome molybdenum steel  Mass (g)  288  Trusco Part No.  853-1378 
    from S$26.99
    Min. 6 days
  36. Rotary socket wrench
    Toyo Associates Rotary socket wrench
    One rotary socket wrench can be used for tightening and loosening 7 types of bolts and nuts.
    Mass (g)  187  Dimension (mm)  64×64×32  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$29.99
    Min. 5 days
  37. Architectural socket 17mm
    SEK (Suekage Tool) Architectural socket 17mm
    Material  Chrome molybdenum steel  Width Across Flats (mm)  17  Mass (g)  218  Trusco Part No.  853-1374 
    from S$18.99
    Min. 6 days
  38. 2-way socket for construction 21MM
    SEK (Suekage Tool) 2-way socket for construction 21MM
    Material  Chrome vanadium steel  Mass (g)  192  Width Across Flats (mm)  21  Trusco Part No.  853-1399 
    from S$27.99
    Min. 6 days
  39. Demolition wrench for form ties
    MITLOY Demolition wrench for form ties
    Suitable when the bolt protrusion from the foam tie nut is almost constant.
    Dimension l1 (mm)  17  Mass (g)  180  Dimension S (mm)  21  Dimension D2 (Φmm)  25  Dimension D1 (Φmm)  29  Dimension l2 (mm)  48  Dimension L (mm)  80  Specification  For impact wrench 
    from S$22.99
    Min. 7 days
  40. bit
    JTC bit
    The tip is processed to be non-slip (5 pieces each)
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$9.99
    Min. 6 days
View : Grid List
Filter

Items 1 - 40 of 178

Set Ascending Direction