All Category

Socket Handles

Socket handle is a tool for tightening or loosening bolts and nuts. A ratchet handle with a socket on a small head can be used for work in confined spaces. It is useful in the maintenance and repair work of automobiles and motorcycles. In addition, there are products with various shapes such as offset handles and screwdrivers that are suitable for tightening parts where force is applied, and it is important for the T-shaped type to select a tool suitable for the work, such as one that can slide the handle. There are also reasonable products with a variety of adapters and extension bars that can change the shape, making it suitable for a wide range of applications.
View : Grid List
Filter

Items 1 - 40 of 1483

Set Ascending Direction
  1. Ratchet Handle
    MonotaRO Ratchet Handle
    The push button function allows the socket to be attached and detached with a single touch. For tightening and loosening bolts and nuts * Do not use for any other purpose.
    Material  Chromium vanadium steel  Surface Treatment  Chrome-plated  Feed Angle (°) 
    Rating:
    91%
    from S$19.99
    Min. 2 days
  2. Hinged Spinner Handle
    MonotaRO Hinged Spinner Handle
    It can be used for work in deep and narrow places and by freely changing the angle of the socket. For work in deep and narrow spaces * Do not use for any other purpose.
    Material  Chromium vanadium steel 
    Rating:
    92%
    from S$8.19
    Min. 2 days
  3. Ratchet handle telescopic
    MonotaRO Ratchet handle telescopic
    Since it is telescopic, bolts and nuts can be easily attached and detached even in hard-to-reach places. It is a one-push release type. The angle can be adjusted in 10 steps by 18 degrees, and it is OK to swing 180 degrees. For attaching and detaching bolts and nuts * Do not use for any other pur... Read More
    Material  Chrome vanadium steel  Feed Angle (°) 
    Rating:
    88%
    from S$34.99
    Min. 2 days
  4. Ratchet handle full turn type
    MonotaRO Ratchet handle full turn type
    Since the head part rotates 180 degrees, it is possible to turn bolts in deep places or at angles. For bolting work in deep places or angled places * Do not use for any other purpose.
    Material  Chromium vanadium steel  Number of Gear Teeth  72 
    Rating:
    88%
    from S$26.99
    Min. 2 days
  5. Compact Flex Short Ratchet Handle
    KTC Compact Flex Short Ratchet Handle
    One push release type * If you use too much force on the flex part, the work will become unstable. Be sure to operate the left and right switching levers as it may cause damage or slip.
    Specification  21st century version tool  Type  Swing  Mass (g)  90  Feed Angle (°)  10 
    Rating:
    100%
    from S$96.99
    Min. 2 days
  6. Multi screwdriver & socket set
    BOSCH Multi screwdriver & socket set
    Most screws can be turned. A set of 6 types of tips (Philips, Positive Drive, Minus, Torx, Hex, Socket). It can be used with both power tools and hand tightening. It can be used for a wide range of screw tightening work. It can be screwed with a power tool and hand tightened with a handler ratchet.
    Mass (g)  322 
    from S$58.99
    Min. 2 days
  7. T-type slide handle
    SIGNET T-type slide handle
    An excellent head that combines the functions of a T-shaped handle and a spinner handle can rotate 180 °. Secure the head with the grooves on both ends of the handle.
    Rating:
    100%
    from S$15.99
    Min. 2 days
  8. Compact flex ratchet handle
    KTC Compact flex ratchet handle
    Specification  21st century version  Type  Swing  Mass (g)  140  Feed Angle (°)  10 
    Rating:
    100%
    from S$139.90
    Min. 2 days
  9. Swivel Ratchet Handle
    Pro-Auto Swivel Ratchet Handle
    A ratchet handle with a more compact head than the conventional compact head. The industry's smallest head has been achieved with a new gear mechanism (PAT.). Number of gears 72 threads (feed angle 5 degrees) Final tightening OK! Fast turn with spin disc. Easy to attach / detach socket etc. w... Read More
    from S$39.99
    Min. 5 days
  10. 2000 series ratchet handle
    PROXXON 2000 series ratchet handle
    Soft resin handle grip (manufactured by Dupon) ratchet born from ergonomics. The gear structure is also sturdy (feed angle 8 ° 44 teeth) and durability (high torque, long life) is also excellent. Specifications Push release type! Bolt / nut turning, etc.
    Feed Angle (°)  8, 44 tooth gear  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$39.99
    Min. 4 days
  11. Ratchet Handle
    TONE Ratchet Handle
    Type  Cam type  Number of Teeth  72  Feed Angle (°) 
    Rating:
    89%
    from S$35.99
    Min. 2 days
  12. Ratchet Handle
    KTC Ratchet Handle
    One push release type * Be sure to operate the left and right switching levers as it may cause damage or slip.
    Specification  21st century version  Type  Standard  Feed Angle (°)  10 
    Rating:
    90%
    from S$69.99
    Min. 2 days
  13. Ratchet Handle Hold Type
    TONE Ratchet Handle Hold Type
    The compact head is effective for narrow work. It has 72 teeth and a feed angle of 5 degrees. The socket hold mechanism allows you to replace the socket with a single push operation. For tightening and loosening bolts and nuts.
    Number of Teeth  72 
    Rating:
    97%
    from S$53.99
    Min. 2 days
  14. Ratchet Handle Lightweight Type
    MonotaRO Ratchet Handle Lightweight Type
    Lighter and easier to handle than traditional ratchet handles. The rubber grip makes it easy to grip and does not slip. In addition, the push button function allows the socket to be attached and detached with a single touch. For tightening and loosening bolts and nuts. * Do not use for any other ... Read More
    Material  Chromium vanadium steel  Feed Angle (°) 
    Rating:
    87%
    from S$19.99
    Min. 2 days
  15. Rotary Ratchet
    MonotaRO Rotary Ratchet
    You can rotate the socket by rotating the grip even in places where you can not swing the steering wheel, you can easily rotate the socket in narrow places or deep places such as car engine room, motorcycle maintenance and repair. For work in narrow or deep places such as car engine room, motorcy... Read More
    Material  Chromium vanadium steel  Mass (g)  410  Number of Gear Teeth  60 
    Rating:
    81%
    from S$48.99
    Min. 2 days
  16. Spinner handle
    KTC Spinner handle
    * Please hold the center of the grip as you may get your hands caught in the drive unit. * Be careful of overtorque as the overall length is long and it is easy to apply an excessive load.
    Type  Spinner handle 
    Rating:
    95%
    from S$35.99
    Min. 2 days
  17. Ratchet Handle
    TONE Ratchet Handle
    Ideal for quick turning as work can be done while the bolt and nut are fitted. We have the tools you need for everything from light work to heavy industrial maintenance.
    Rating:
    88%
    from S$56.99
    Min. 2 days
  18. Sliding T-Handle
    MonotaRO Sliding T-Handle
    The insertion corner slides and can be used wherever you like. Both T type and L type can be used. For tightening and loosening work handles for hexagon bolts and nuts * Please refrain from using it for any other purpose.
    Material  Chromium vanadium steel 
    Rating:
    94%
    from S$5.89
    Min. 2 days
  19. T handle
    TONE T handle
    A convenient T-shaped handle with a square drive at the tip of the T-shaped tip that allows you to replace sockets of various sizes.
    Rating:
    92%
    from S$27.99
    Min. 2 days
  20. Ratchet handle Swing type set
    MonotaRO Ratchet handle Swing type set
    It is a convenient set that can be used in deep places with a swing type ratchet handle. For work in a deep place * Do not use for any other purpose.
    Rating:
    85%
    from S$47.99
    Min. 2 days
  21. Quick Spinner
    KTC Quick Spinner
    It is a special drive tool for fast rotation that is more effective when used in combination with a ratchet handle or extension bar. (At light load) The grip has a shape and groove that allows you to see the rotation angle every 90 ° by touch, and an angle display every 30 ° on the surface so tha... Read More
    Type  Spinner 
    Rating:
    88%
    from S$21.99
    Min. 2 days
  22. Ratchet handle
    TRUSCO Ratchet handle
    The head is small and ideal for work in narrow spaces. The ergonomic design fits your hand. Equipped with a socket hold mechanism that makes it easy to attach and detach the socket and does not easily come off during work. You can replace the socket with one push operation. The material is chrome... Read More
    Material  Chrome vanadium steel (Cr-V)  Surface Treatment  Trivalent chrome plating 
    Rating:
    77%
    from S$43.99
    Min. 2 days
  23. Long ratchet handle
    KTC Long ratchet handle
    One push release type * If you use too much force on the flex part, the work will become unstable. Be sure to operate the left and right switching levers as it may cause damage or slip. Be careful of overtorque as the total length is long and it is easy to apply an excessive load.
    Specification  21st century version  Type  Long  Feed Angle (°)  10 
    Rating:
    87%
    from S$89.99
    Min. 2 days
  24. Telescopic flex lock ratchet
    Pro-Auto Telescopic flex lock ratchet
    The flex mechanism of the head part can swing 180 °. It can be locked by adjusting the angle in 12 steps of 15 °. The main body is telescopic and can be stretched for use. With 72 teeth and a feed angle of 5 °, it rotates comfortably and has excellent workability. For maintenance and repair work ... Read More
    Material  Chrome vanadium steel  Number of Teeth  72 
    Rating:
    100%
    from S$109.90
    Min. 2 days
  25. Short Ratchet Handle
    TRUSCO Short Ratchet Handle
    With a push button function, the socket can be easily attached and detached. A 72-tooth gear has been adopted to enable work in tight spaces. It is a short (stubby) type.
    Material  Chrome vanadium steel (Cr-V)  Number of Teeth  72  2018 Trusco page  4 0248 
    Rating:
    90%
    from S$39.99
    Min. 2 days
  26. Offset handle
    MonotaRO Offset handle
    The L-shape makes it convenient for tightening and removing, which applies a large amount of force. For forceful tightening and removal work * Please refrain from using it for any other purpose.
    Material  Chromium vanadium steel 
    Rating:
    93%
    from S$9.89
    Min. 2 days
  27. T-Type Slide Handle
    TRUSCO T-Type Slide Handle
    Since the handle can be slid, it can be used in any position. Strong tightening is possible as an L-type wrench. The material is chrome vanadium steel.
    Material  Chrome vanadium steel (Cr-V)  Surface Treatment  Trivalent chrome plating 
    Rating:
    97%
    from S$13.99
    Min. 2 days
  28. Spinner handle
    TONE Spinner handle
    The corner drive bends 90 ° to the left and right around the pin on the head of the handle and stops at any angle. When turning quickly, such as temporarily tightening, use the handle upright and lay the handle sideways for final tightening.
    Rating:
    100%
    from S$39.99
    Min. 2 days
  29. Ratchet handle Swing type
    TONE Ratchet handle Swing type
    A compact head swing type that is ideal for work in tight spaces that are difficult to reach. The socket hold mechanism allows you to replace the socket with a single push operation. It has 72 teeth and a feed angle of 5 degrees.
    Material  Structural steel  Number of Teeth  72 
    Rating:
    100%
    from S$76.99
    Min. 2 days
  30. Spinner Handle
    TRUSCO Spinner Handle
    Ideal for applying higher torque and stronger force than the ratchet handle. The material is chrome vanadium steel.
    Material  Chrome vanadium steel (Cr-V)  Surface Treatment  Trivalent chrome plating 
    Rating:
    93%
    from S$29.99
    Min. 2 days
  31. Rotary ratchet
    PROXXON Rotary ratchet
    In addition to the "twist rotary mechanism" that allows the socket to be rotated by rotating the grip even in places where the handle cannot be swung, it is equipped with a 1/4 inch (6.3 mm) insertion angle to the grip end. A wider variety of uses have been expanded, such as attaching a... Read More
    RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    55%
    from S$119.90
    Min. 2 days
  32. Short ratchet handle (hold type)
    TONE Short ratchet handle (hold type)
    With 72 teeth, the feed angle is 5 °. Since the head part is more compact than the conventional product, it can be done efficiently even in narrow places. Equipped with a socket hold mechanism that makes it easy to attach and detach the socket and does not easily come off during work. You can rep... Read More
    Number of Teeth  72 
    Rating:
    93%
    from S$46.99
    Min. 2 days
  33. Compact short ratchet handle
    KTC Compact short ratchet handle
    * Be sure to operate the left and right switching levers as it may cause damage or slip.
    Specification  21st century version  Type  Compact short  Mass (g)  90  Feed Angle (°)  10 
    Rating:
    100%
    from S$67.99
    Min. 2 days
  34. Screwdriver type handle
    TONE Screwdriver type handle
    A handle with a square drive at the tip of the screwdriver. Used as a box driver. The grip end has a concave insertion angle and can also be used as an extension bar.
    Mass (g)  100 
    Rating:
    97%
    from S$15.99
    Min. 2 days
  35. Swing short ratchet handle
    TRUSCO Swing short ratchet handle
    The head can swing flexibly, making it ideal for work in narrow spaces. A 72-tooth gear has been adopted to enable work in tight spaces.
    Specification  Short type  Material  Chrome vanadium steel (Cr-V)  Number of Teeth  72  2018 Trusco page  4 0248 
    Rating:
    97%
    from S$56.99
    Min. 2 days
  36. Nut spinner long type
    TONE Nut spinner long type
    Material  Structural steel 
    Rating:
    96%
    from S$38.99
    Min. 2 days
  37. T handle
    Ko-Ken (Yamashita Industrial Lab) T handle
    RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    92%
    from S$27.99
    Min. 2 days
  38. Swivel ratchet 2 style grip 3/8 inch
    DAYTONA Swivel ratchet 2 style grip 3/8 inch
    A convenient ratchet series with various functions. Please choose according to the application.
    Material  Chrome vanadium steel, orange resin grip  Mass (g)  142  Handle Diameter (Φmm)  Approx. 27 (thickest part)  Finish  Chrome plating  Feed Angle (°)  Square Drive (inch)  3/8(9.5mm)  Number of Gear Teeth  72 
    Rating:
    95%
    from S$49.99
    Min. 2 days
  39. Ratchet handle (insertion angle 12.7 mm)
    TONE Ratchet handle (insertion angle 12.7 mm)
    Comes with an easy-to-use socket hold mechanism. Tightening and loosening bolts and nuts.
    Rating:
    100%
    from S$58.99
    Min. 2 days
  40. Flex long ratchet handle
    KTC Flex long ratchet handle
    One push release type * If you use too much force on the flex part, the work will become unstable. Be sure to operate the left and right switching levers as it may cause damage or slip. Be careful of overtorque as the total length is long and it is easy to apply an excessive load.
    Specification  21st century version  Type  Swing long  Feed Angle (°)  10 
    Rating:
    80%
    from S$109.90
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 1483

Set Ascending Direction