All Category

Electrical Construction Related Products

View : Grid List
Filter

Items 1 - 40 of 68

Set Ascending Direction
  1. Electric Works Pro Canvas Holder
    JEFCOM (DENSAN) Electric Works Pro Canvas Holder
    Friction resistant "Polyester 1680 denier" Lightweight and durable, it does not easily lose its shape.
    Mass (g)  145  Dimensions, Width W x Depth D x Height H (mm)  150×80×260  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$43.99
    Min. 2 days
  2. Ductor tightening wrench
    NEGUROSU DENKO Ductor tightening wrench
    Convenient for tightening mounting bolts for W3 / 8 such as Boysetter BOY □ and Onihook CBX1. * Be careful not to overtighten. * The surface treatment of electrogalvanized products will be changed from colored chromate (hexavalent) to trivalent chromate. The color of the exterior changes from gol... Read More
    Mass (g)  153  Maximum Tightening Torque (Nm [kgfcm])  19.61[200]  Suitable Size (mm)  (Distance to opposite sides) 14, 17 
    Rating:
    100%
    from S$9.99
    Min. 2 days
  3. Slim plastic holder
    JEFCOM (DENSAN) Slim plastic holder
    Made of EVA resin that is resistant to water and does not easily lose its shape. Clean and slim with no seam allowance or edging. A shape that makes it difficult for the tip of the tool to stick out.
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$16.99
    Min. 3 days
  4. Electric extension cord
    BIGMAN Electric extension cord
    Soft cord that is soft even in winter. Abundant variations from short to long. There are also one type of outlet and three crosses. Power tool extension cord Do not use the cord in a bundled or fixed state. Be sure to hold the plug part when inserting or removing the plug. Make sure to insert the... Read More
    Rating of Outlet  125V-12A 
    from S$10.99
    Min. 8 days
  5. Electric extension cord
    iHelp Electric extension cord
    It is an electric work extension cord with a length of up to 1200 W and a length of 10 m. Power tool extension cord Do not use the cord in a bundled or fixed state. Be sure to hold the plug part when inserting or removing the plug. Make sure to insert the plug and body parts securely. Do not tram... Read More
    Rating of Outlet  125V-15A  Outlet Specification  2P × 1 mouth 
    from S$18.99
    Min. 8 days
  6. Chip scattering prevention device
    NEGUROSU DENKO Chip scattering prevention device
    A magnet attracts chips generated when drilling holes in a steel plate. You can drill holes without soiling the surrounding area. Ideal for drilling (expansion, remodeling) in the existing board. * Please wear dust-proof glasses while working. There is a risk of eye damage due to chips. * Kiriko ... Read More
    Material  Aluminum alloy  Suitable for  Φ4 or M4 screw pilot hole diameter  Mass (g)  62.5 
    from S$68.99
    Min. 2 days
  7. Nut turning tool
    NEGUROSU DENKO Nut turning tool
    Labor saving for nut threading can be performed. Lightweight and compact. It can be used for W3 / 8, M10 and W1 / 2 by using the front and back properly.
    Mass (g)  370  Material  Polypropylene 
    Rating:
    100%
    from S$4.69
    Min. 2 days
  8. Tool nut (WN6) tightening tool
    NEGUROSU DENKO Tool nut (WN6) tightening tool
    from S$29.99
    Min. 2 days
  9. Replacement mold for cable racks and metal ducts (for MAKRDP)
    NEGUROSU DENKO Replacement mold for cable racks and metal ducts (for MAKRDP)
    Drilling Diameter (Φmm)  10.5 
    from S$139.90
    Min. 2 days
  10. Full screw bolt turning tool
    NEGUROSU DENKO Full screw bolt turning tool
    By using it for a charging impact driver or a charging drill driver, you can speedily attach the hanging bolt to the insert. Even if the driver bit breaks, it can be easily replaced and used repeatedly. Commercially available impact driver bits (65 mm or more) can be used. * Compatible with 18V c... Read More
    Overall Length (mm)  90 (with driver bit) 
    from S$58.99
    Min. 2 days
  11. Cable rack and metal duct drilling tool
    NEGUROSU DENKO Cable rack and metal duct drilling tool
    Since it is a manual type, no power supply is required. Holes (Φ10.5) for joint fittings can be drilled in compatible cable racks and metal ducts. Since it can be inserted from the upper surface of the main girder, it is possible to drill holes in the cable rack after construction. Since the hand... Read More
    Drilling Diameter (Φmm)  10.5  Overall Length (mm)  645  Mass (kg)  6.5 
    from S$679.90
    Min. 2 days
  12. Screwdriver bit for assembly rack
    NEGUROSU DENKO Screwdriver bit for assembly rack
    It can be set in a commercially available charging impact driver. * When using a charging impact driver, stop tightening immediately after tightening the bolts. The driver bit and bolt may be damaged or deformed.
    Mass (g)  16  Overall Length (mm)  70 
    from S$24.99
    Min. 6 days
  13. Electric Works Pro Canvas Pouch
    JEFCOM (DENSAN) Electric Works Pro Canvas Pouch
    Friction resistant "Polyester 1680 denier" Lightweight and durable, it does not easily lose its shape.
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$38.99
    Min. 3 days
  14. Socket for charging impact driver
    NEGUROSU DENKO Socket for charging impact driver
    Even if the driver bit breaks, it can be easily replaced and used repeatedly. Commercially available impact driver bits (75 mm or more) can be used. MAK MW-12 can use 55 mm or more. * Compatible with 18V rechargeable impact driver
    from S$43.99
    Min. 19 days
  15. Hand vendor
    No Brand Hand vendor
    It is used when storing flexible pipes in the bends of malls.
    from S$55.99
    Min. 8 days
  16. Nail hammer (nail punch)
    NEGUROSU DENKO Nail hammer (nail punch)
    It is used when sinking the head of a nail or pulling out a protruding nail. Light and thin, it fits in your chest pocket.
    Specification  No magnetism  Type  Nail punch  Mass (g)  58  Overall Length (mm)  125 
    Rating:
    20%
    from S$7.39
    Min. 4 days
  17. Magnetic nailing tool
    NEGUROSU DENKO Magnetic nailing tool
    You can hit it at any angle without bending the nail. Convenient for nailing in tight spaces where a mallet does not fit. Light and thin, it fits in your chest pocket. * If you hit it too much, the tip of the magnet may be crushed and damaged. * A magnet is used. Do not use in places where magnet... Read More
    Specification  Magnetic 
    from S$58.99
    Min. 2 days
  18. Spark holder for high-speed cutter
    NEGUROSU DENKO Spark holder for high-speed cutter
    Covers and sheets are made of non-combustible material (flameproof). Due to its lightweight and compact design, it does not take up storage space and is convenient to carry. After cutting, the cutting powder will fall from the bottom of the case, making cleaning easy. * Please lay a curing sheet ... Read More
    Mass (kg) 
    from S$669.90
    Min. 6 days
  19. Socket adapter for charging impact driver
    NEGUROSU DENKO Socket adapter for charging impact driver
    In combination with the replacement socket MAK1823- □, bolts and nuts in the ductor channel can be tightened. * Do not connect two or more replacement sockets to the adapter.
    Maximum Tightening Torque (Nm [kgfcm])  24.51[250]  Mass (g)  65  Suitable Size (mm)  (Distance to opposite side) 13  Overall Length (mm)  75 
    from S$36.99
    Min. 18 days
  20. Lightweight stud post channel notch tool
    NEGUROSU DENKO Lightweight stud post channel notch tool
    The steady rest channel required when pulling the wire into the wiring equipment can be processed neatly and efficiently. * Keep the tool horizontal and push it all the way to the back of the cradle to cut it out. * Do not use for materials with a thickness of more than 1.2 mm. There is a risk of... Read More
    Applicable pipe outer diameter (Φmm)  32  Overall Length (mm)  600  Mass (kg)  2.8  Suitable Thickness of Workpiece (mm)  Up to 1.2 
    from S$689.90
    Min. 6 days
  21. 2-stage electrical bag
    WORK MASTER 2-stage electrical bag
    Soft leather specifications and soft touch inside prevent hand pain caused by rubbing. R-processed bottom surface and gentle radius reduce friction on clothes during work. Two-stage electric work bag. Electrician bag * Avoid using in places with high temperatures. Also, keep away from fire. If yo... Read More
    from S$43.99
    Min. 3 days
  22. 45mm bulb replacement adapter
    ESCO 45mm bulb replacement adapter
    Esco Part No.  EA928BP-11 
    from S$23.99
    Min. 4 days
  23. Freedom for charging drill driver
    NEGUROSU DENKO Freedom for charging drill driver
    You can easily adjust the hole diameter and replace the cutter blade with a hexagon wrench. In addition to rigid vinyl chloride, it can also be used for plastics, new building materials, non-combustible building materials, non-combustible boards, wood, etc. * Do not use for non-compatible materia... Read More
    Overall Length (mm)  127  Applicable Hole Diameter (Φmm)  15~45  Suitable Thickness of Workpiece (mm)  1~90  Mass (g)  80 
    from S$53.99
    Min. 19 days
  24. Electric extension cord
    BIGMAN Electric extension cord
    For outdoor leisure Ideal for power tools with electromotive force and for tools with high power consumption Thick core wire
    Power (W)  Up to 1500  Length (m)  Color  Soft light green 
    from S$44.99
    Min. 8 days
  25. Replacement mold (for MAKRDP)
    NEGUROSU DENKO Replacement mold (for MAKRDP)
    from S$84.99
    Min. 6 days
  26. Bit socket for assembly rack
    NEGUROSU DENKO Bit socket for assembly rack
    It can be set on a commercially available ratchet handle (9.5sq.), MAK906R.
    Overall Length (mm)  50  Mass (g)  44 
    from S$29.99
    Min. 6 days
  27. Spare blade for deburring scraper (for MAKHPS)
    NEGUROSU DENKO Spare blade for deburring scraper (for MAKHPS)
    from S$46.99
    Min. 19 days
  28. Punch replacement blade storage case
    Izumi Products Company Punch replacement blade storage case
    Mass (g)  2256.0  Trusco Part No.  226-1211  Specification  Convenient for storing spare blades 
    from S$189.90
    Min. 5 days
  29. Three-sided roller
    K-AI Three-sided roller
    Smooth wire drawing is possible by installing a three-sided roller. Parts other than the rollers are anodized, so they have an insulating effect. The material of the roller part is made of resin so that the cable will not be damaged. For wiring extension work
    Mass (kg)  0.95  safety tensile strength (kN)  11.0  Maximum Load (kN)  11.0  Width (mm)  220  Height (mm)  220  Trusco Part No.  483-3406  Length (mm)  55 
    from S$789.90
    Min. 3 days
  30. Hydraulic punch cylinder separately
    Izumi Products Company Hydraulic punch cylinder separately
    Mass (kg)  1.9  Trusco Part No.  226-1215  Specification  Hydraulic puncher head 
    from S$469.90
    Min. 5 days
  31. Ratchet handle
    NEGUROSU DENKO Ratchet handle
    Mass (g)  256  Suitable for  9.5 square hole socket  Overall Length (mm)  175 
    from S$67.99
    Min. 19 days
  32. Nut turning tool
    NEGUROSU DENKO Nut turning tool
    Nuts can be quickly attached to the middle of the hanging bolts. The bolt stopper pin keeps the nut mounting position constant. * Be sure to insert the bolt stopper pin. Centrifugal force may cause it to pop out and cause injury. * Do not tighten the nut. It may cause tool damage. * Do not drop o... Read More
    Suitable Chucks  Φ10mm 
    from S$119.90
    Min. 19 days
  33. Rainproof extension cord
    BIGMAN Rainproof extension cord
    Color  Black  Power (W)  Up to 1500 
    from S$38.99
    Min. 8 days
  34. Ratchet grooved tool
    NEGUROSU DENKO Ratchet grooved tool
    Work easily with less space and less movement. Convenient for grooving work when connecting joints. A spanner shape that is easy to set on a pipe. Efficient work is possible with the ratchet mechanism and the automatic feed mechanism for grooved rolls. * If it gets dirty with mud, wash it with wa... Read More
    Mass (kg)  0.96  Suitable Pipe Nominal Size  20Su、25Su  Applicable Pipes  Stainless steel pipe  Overall Length (mm)  240 
    from S$589.90
    Min. 19 days
  35. Replacement die for rack cutter attachment (for MAKE-RC)
    NEGUROSU DENKO Replacement die for rack cutter attachment (for MAKE-RC)
    The master girder of the SR type cable rack can be cut. It can also cut the main girder of S-SR made of stainless steel and SD-SR cable rack made of highly corrosion-resistant plated steel plate. You can also cut the master girder of the QR type cable rack by exchanging the replacement mold. * Pl... Read More
    from S$249.90
    Min. 19 days
  36. Angular cutter
    MIRAI INDUSTRY Angular cutter
    Used for cutting racks. Wire cutter method! It is a type that cuts by sandwiching.
    Mass (kg)  About 2.8 
    from S$279.90
    Min. 5 days
  37. Replacement roll for ratchet grooved tools (for MAKHPM)
    NEGUROSU DENKO Replacement roll for ratchet grooved tools (for MAKHPM)
    from S$67.99
    Min. 19 days
  38. Swing Ratchet Box Wrench
    NEGUROSU DENKO Swing Ratchet Box Wrench
    Tilt the socket (up to 15 °) to avoid obstacles when tightening. The ratchet mechanism (with switching lever) enables quick tightening. 4 sizes of bolts and nuts can be tightened. Since the socket is through, it can be used even if the extra length of the bolt is long.
    Mass (g)  195 
    Discontinued
  39. Blackboard stand
    NEGUROSU DENKO Blackboard stand
    You can easily take a picture by yourself. Since the height and angle of the blackboard can be adjusted freely, it can be used at any site. It is a foldable type that is convenient to carry and store. * Please use a blackboard with a mass of 1.5 kg or less. * Please use the stand with the legs op... Read More
    Suitable for  Blackboard thickness / up to 25mm  Mass (kg) 
    Rating:
    60%
    Discontinued
  40. 1 pliers
    WORK MASTER 1 pliers
    A tool case made of a composite material made of polyester and artificial leather. One plier. 1 plier * Avoid using in places with high temperatures. Also, keep away from fire. If you notice any abnormalities such as fraying, discontinue use. It may lead to a serious accident such as falling. Ins... Read More
    Width W x Overall Length (mm)  About 90 × 260  Mass (g)  About 60 
    Discontinued
View : Grid List
Filter

Items 1 - 40 of 68

Set Ascending Direction