Socket Bits (Nut Setter)

Achieves stable quality and low cost in mass production. Uses original special alloy steel. Due to quality control, it has a long track record in the industrial world where work in severe and harsh conditions is required as a bit that is resistant to breakage.

Swing when pulled, fixed when pushed. Both can be used. If there are no obstacles around it, you can push it to fix it and use it as a deep hole socket. For tightening at the corner, it is convenient to pull and tighten while swinging.

High-volume production achieves stable quality and low cost. Original special alloy steel is used. Due to quality control, it has a long track record in the industry where work in severe and harsh conditions is required as the most fragile bit.

Since the shaft and socket are heat-treated to the optimum hardness, they are resistant to twisting. The patented bearing prevention structure prevents rattling and shaft loss. For attaching hexagon bolts and nuts as well as for attaching piping and wiring support brackets.

Since the shaft and socket are heat-treated to the optimum hardness, they are resistant to twisting. The patented bearing prevention structure prevents rattling and shaft loss. For attaching hexagon bolts and nuts as well as for attaching piping and wiring support brackets.

Iron powder is attached to the magnet. In the ball lock, the ball jumps and breaks ... The ring spring type solves such inconvenience! It holds the screw firmly.

Revolutionary nut installation work for all screws (hanging bolts)! Attach it to your impact driver and work easily! Easy to handle due to its compact specifications! Can be used even if there are obstacles before and after the nut! Easily install nuts before installing all screws and install nut... Read More

Suitable for light sky work, level adjustment of piping and ducts, and dismantling work. The dodecagon makes it easy to insert into the nut. A shaft press-fit type that is resistant to rattling and breaking. Supports 18V impact. It is super lightweight and surprisingly light, reducing the work lo... Read More

A high-precision bit that supports screw tightening work in small and precision fields such as computers, OA equipment, audio equipment, VTRs, and optical equipment.

It is an ultra-short design that allows hexagon bolts to be turned in a narrow space. A bit with a shaft diameter of 6.35 mm. It can be used with various ratchet drivers.

Set the hardness of the socket part high (HRC51), The wear resistance of the notched part is improved.

A high-precision bit that supports screw tightening work in small and precision fields such as computers, OA equipment, audio equipment, VTRs, and optical equipment.

The ultra-lightweight 76g greatly reduces the burden on the operator. It supports 18V impact and is ideal for heavy users using high impact drivers. The dodecagonal double nut is ideal for continuous tightening and loosening work. For scaffolding clamps

A stepped socket with a drive angle of 1/4 "(6.35 mm) that has excellent strength and accuracy. A magnet is attached to prevent bolts and nuts from falling.

Long type socket bit. Easy to identify the size with coloring. (GREATTOOL Socket Bit GTRS / GTMS Series). Supports 18V impact. * Use a power tool with a clutch or an impact mechanism. Be sure to install and replace the socket. Check for deformation and cracks before use, and do not use if there a... Read More

Box type ultra-short bit for manual screwdriver.

It can be used by attaching it to most electric / charging screwdrivers / air screwdrivers on the market in Japan. For preventing P-con from falling in mid-to-high-rise buildings. The P-con is held by the spring and ball to prevent the P-con from falling unexpectedly. For P-con with dimensions up... Read More

Cost pursuit specifications. For removing slag You can hit the shaft with a hammer.

A standard type driver bit. Wera's unique surface contact structure called Hex-Plus contributes to extending the life of the screw without damaging the inside of the hexagonal screw hole.

A nut setter with enhanced holding power that can be firmly grasped even with long type tex screws (drill screws). Since it does not use a magnet, it does not attract chips or iron sand and holds stainless steel tex screws strongly.

A stepped socket with a drive angle of 1/4 "(6.35 mm) that has excellent strength and accuracy.

It can be used by attaching it to most electric / charging screwdrivers / air screwdrivers on the market in Japan. It has a built-in ball lock structure. Holds the drill screw to prevent it from falling. Rust-resistant plating finish. We use special alloy steel that has both stickiness and hardne... Read More

A high-precision bit that supports screw tightening work in small and precision fields such as computers, OA equipment, audio equipment, VTRs, and optical equipment.

It can be used by attaching it to most electric / charging screwdrivers / air screwdrivers on the market in Japan. It has a built-in strong magnet. Holds the drill screw to prevent it from falling. Shot blasted finish, fits naturally on bolts and nuts. We use special alloy steel that has both sti... Read More

A high-precision bit that supports screw tightening work in small and precision fields such as computers, OA equipment, audio equipment, VTRs, and optical equipment.

Disperses stress concentration at the base of the socket, which is the cause of shaft breakage. Excellent durability.

6 points, with magnet, double dent in the insertion part.

A socket bit with a hexagonal opposite side of 6.35 mm and a short ball groove position. It can be used by attaching it to an air driver, etc. It has a built-in strong magnet. Holds the drill screw to prevent it from falling. Shot blasted finish, fits naturally on bolts and nuts. We use special a... Read More

It is used with a 1/4 ”(6.35 mm) HEX bit attached. It is used in combination with one of the replacement driver handles 215A, 7215AG, and 8215A.

215 series 1/4 "HEX bit holder blade. Commercially available 1/4" (6.35 mm) HEX bit can be attached to the magnet holder at the tip. Use in combination with one of the replacement driver handles 215A, 7215AG, and 8215A.

A robust bit, ideal for machining iron and metal plates. Wera's unique surface contact structure called Hex-Plus also contributes to extending the life of the screw without damaging the inside of the hexagonal screw hole. Since it is a magnet type, it is possible to prevent the bolt from fall... Read More

A bit with a hexagonal opposite side of 6.35 mm and a short ball groove position. It can be used by attaching it to an air driver, etc. Due to quality control, it has a long track record in the industry where work in severe and harsh conditions is required as the most fragile bit. Shot blast fini... Read More