All Category

Screwdriver & Bit Accessories

View : Grid List
Filter

Items 1 - 40 of 97

Set Ascending Direction
  1. Screw Anti-Slip Solution
    ANEX Screw Anti-Slip Solution
    The tanned Phillips screw can be removed! A friction enhancer that prevents slipping. The sharp particles engage and bite into the screw. It increases the friction between the screwdriver and the screw and prevents the screw from being licked. It can also be used as an emergency measure when the ... Read More
    Acidic / Alkaline  neutral  Trusco Part No.  469-7651  Ingredient  Thickener, alumina mineral, water 
    Rating:
    93%
    from S$4.69
    Min. 2 days
  2. Magnet Catch
    MonotaRO Magnet Catch
    Catch the screw firmly with a magnet! Demagnetization is also possible. Attached to the driver bit * Do not use for any other purpose.
    Mass (g)  10  Overall Length (mm)  20  Suitable Size (mm)  Hex 6.35 Round shaft 6.3 
    Rating:
    84%
    from S$6.29
    Min. 2 days
  3. Ball Grip Screwdriver for Changeable Bits
    VESSEL Ball Grip Screwdriver for Changeable Bits
    Craftsman spirit "Procon"! You can use it as a familiar ball grip driver by inserting a bit for an electric screwdriver (opposite side 6.35 mm). For electrical work * Bits are not included.
    Mass (g)  64  Overall Length (mm)  100  Handle Diameter (Φmm)  41  Trusco Part No.  448-7125 
    Rating:
    92%
    from S$7.69
    Min. 2 days
  4. Strong Flexible Bit
    SUNFLAG (SHINKI MFG) Strong Flexible Bit
    Bending angle up to 60 degrees is OK. A variety of 6.35 mm axis tip tools can be used. Since the flexible part is double-coated, you can work while firmly holding the shaft part. Great for wall and ceiling work Ideal for wall and ceiling work. Since the flexible part is double-coated, you can wor... Read More
    Shank (mm)  6.35  RoHS directive (corresponding to 10 substances)  Correspondence  Included Accessories  Plus # 2 × 45mm double-ended bit 1 
    Rating:
    100%
    from S$26.99
    Min. 2 days
  5. Magnetic Taro
    SUNFLAG (SHINKI MFG) Magnetic Taro
    Super lightweight! Strong magnet to prevent screws from falling. You can also demagnetize without dropping the screws! Attach it to the driver bit. * Please use with an electric screwdriver bit
    RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    50%
    from S$3.89
    Min. 2 days
  6. One Touch Bit Joint (for Pilot Hole Drill)
    TOP KOGYO One Touch Bit Joint (for Pilot Hole Drill)
    You can drill holes with the bit attached. It can be attached and detached with one touch. It is a lightweight type. It can be used for hexagonal shaft pilot hole drills and ironworking drills (up to 6 mm diameter). * Please wear protective glasses and a dust mask while working. * If the core is ... Read More
    Chuck Outer Diameter (Φmm)  (Bit side, drill side) 15.6  Mass (g)  38  Overall Length (mm)  54  Hex Size across Flats (mm)  6.35 
    Rating:
    80%
    from S$15.99
    Min. 2 days
  7. Long Joint Bit
    SUNFLAG (SHINKI MFG) Long Joint Bit
    Please use it in places where scaffolding such as sheet metal, light sky, interior work cannot be assembled and is out of reach, or where it is narrow and out of reach. Since the tip is replaceable, various bits can be used.
    Rating:
    70%
    from S$11.99
    Min. 2 days
  8. One-Touch Holder
    SUNFLAG (SHINKI MFG) One-Touch Holder
    Easy to install and remove the tip tool (opposite side 6.35 mm axis). Can be used with most chuck type electric drills. Lightweight type with good workability. When you move the main body guide and insert the tip tool, the guide automatically returns and installation is complete.
    Mass (g)  40  Trusco Part No.  212-2367  Size (mm)  6.35 
    Rating:
    60%
    from S$13.99
    Min. 2 days
  9. L-Grip Pro
    SUNFLAG (SHINKI MFG) L-Grip Pro
    Powerful type (impact compatible). You can hold the main body firmly and perform stable work. Smooth torque transmission Uses high-precision bearings Commercially available bits can be used. Please use it as an auxiliary tool for electric screwdrivers and electric drills.
    Minimum Distance from the Corner to Use (mm)  15mm / 360 ° direction free  Overall Length (mm)  168  Maximum Rotation Speed (min -1 [rpm])  2500  Maximum Allowable Torque (Nm [kgfm])  29.4  Trusco Part No.  396-1346  Mass (g)  400  Connector Diameter  6.35 (hex)  RoHS directive (corresponding to 10 substances)  Correspondence  Material (Main Unit)  Iron 
    Rating:
    100%
    from S$86.99
    Min. 2 days
  10. Gripper
    Wera Gripper
    By attaching it to the tip of a screwdriver, the two arms hold the screw when tightening or loosening the screw. The screw will not come off from the screwdriver when tightening the screw in a deep hole or when working upward such as on the ceiling. For tightening long screws.
    Mass (g)  12  Material  Elastomer  Suitable Screwdriver  Shaft diameter Φ4.5-6.0mm  Trusco Part No.  483-9200 
    Rating:
    47%
    from S$12.99
    Min. 2 days
  11. Handle for Super Action Grip Screwdriver
    ANEX Handle for Super Action Grip Screwdriver
    You can use two types, straight type and T type handle. You can use a bit for an electric screwdriver with an opposite side of 6.35 mm.
    Overall Length (mm)  72  Trusco Part No.  494-2591  Mass (g)  115 
    Rating:
    75%
    from S$29.99
    Min. 2 days
  12. Precision Replaceable Driver Handle
    ANEX Precision Replaceable Driver Handle
    Electric screwdriver bit can be used (opposite side 6.35 mm hexagonal shaft bit) Small handle ideal for precision bits
    Width Across Flats (mm)  6.35  Overall Length (mm)  78 
    Rating:
    100%
    from S$7.69
    Min. 2 days
  13. Driver holder
    PB SWISS TOOLS Driver holder
    A full-scale holder with a built-in spring inside the rail.
    Rating:
    20%
    from S$27.99
    Min. 2 days
  14. Torque Grip
    TONE Torque Grip
    Shaft Length (mm)  32  Load Direction  Right  Width Across Flats (mm)  [Bit outlet] 6.35 
    from S$29.99
    Min. 2 days
  15. Color Bit & Extension Holder Set
    ANEX Color Bit & Extension Holder Set
    A set of plus / minus / hexagon wrench color bits and extension holders that can extend the bits.
    Overall Length (mm)  65  Mass (g)  241  Trusco Part No.  753-6488 
    from S$36.99
    Min. 2 days
  16. Clip Light
    TRUSCO Clip Light
    *Battery life is about 30 hours continuously, but it may be shorter due to natural discharge. *Do not use for electric tools.
    Clip Clamping Width (mm)  1.5~10  Mass (g)  Overall Length (mm)  37  Trusco Part No.  437-3855  Included Accessories  With 3 button batteries (LR41) 
    from S$8.79
    Min. 2 days
  17. Carpenter SUKESAN
    SEK (Suekage Tool) Carpenter SUKESAN
    You can use an electric screwdriver to tighten hanging bolts related to electrical equipment and air conditioning. Work efficiency is dramatically improved compared to conventional manual work. For tightening nuts of hanging bolts related to electrical equipment and air conditioning.
    Hex Width Across (mm)  17  Trusco Part No.  439-1985  Mass (g)  478  Square Drive (mm)  6.35 (Hex axis) 
    from S$199.90
    Min. 2 days
  18. One-Touch Joint Adapter
    trad One-Touch Joint Adapter
    Various hexagonal shaft tip tools can be easily attached without removing the bit, improving work efficiency! Pilot hole drill / woodwork drill / iron drill / concrete drill One-touch lock type Easy attachment / detachment! + The pilot hole cone can be easily attached and detached with one touch ... Read More
    Square Drive (mm)  6.35(1/4")  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$15.99
    Min. 2 days
  19. Color Pilot Drill, High-Speed Steel
    ANEX Color Pilot Drill, High-Speed Steel
    It has a double groove structure that is hard to break and high speed steel (HSS) for excellent durability. You can see the size by color. Work Material: Wood, Bamboo, Plastic, Gypsum Board, Particle Board
    Overall Length (mm)  100/110/115  Drill Diameter (Φmm)  2/2.5/3  Mass (g)  33  Shank Diameter (mm)  6.35  Trusco Part No.  777-7779  Set Contents  ACK-020、025、030  Paint Color  Blue-violet / red-purple / red  Suitable Model  Electric drill 
    Rating:
    80%
    from S$26.99
    Min. 2 days
  20. Screw-Guide
    SUNFLAG (SHINKI MFG) Screw-Guide
    Even long screws can be driven stably without wobbling. Ultra lightweight type. With a convenient scale that allows you to check how much the screw is inserted with your own eyes. It can be used for bits with a total length of 110 mm or more. It can be used for all charging driver models. Ideal f... Read More
    Overall Length (mm)  110  Tip Size (#)  Mass (g)  50  Trusco Part No.  776-8125  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$12.99
    Min. 2 days
  21. 1440/1442SB Screw Retainer for Screwdriver (Blister Packed)
    Wera 1440/1442SB Screw Retainer for Screwdriver (Blister Packed)
    By attaching it to the tip of a screwdriver, the two arms hold the screw when tightening or loosening the screw. The screw will not come off from the screwdriver when tightening the screw in a deep hole or when working upward such as on the ceiling.
    Material  Elastomer  2018 Trusco page  4 0720  Mass (g)  16  Trusco Part No.  837-0634 
    from S$24.99
    Min. 2 days
  22. B-Holder
    SUNFLAG (SHINKI MFG) B-Holder
    You can also use it as a key chain by attaching it to the bee holder! Joint rod for bee holder.
    RoHS directive (corresponding to 10 substances)  Correspondence  Specification  Dedicated joint rod 
    from S$3.59
    Min. 2 days
  23. SF Pitatto-Kun
    SUNFLAG (SHINKI MFG) SF Pitatto-Kun
    A 3-piece set that is convenient for construction work. Bis adjuster: You can drive a screw to a certain depth. Adjustable depth. Ideal for screwing ceiling boards and gypsum boards. With stop position confirmation mark. Vispita: A strong magnet can reliably stabilize machine screws and long scre... Read More
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$33.99
    Min. 2 days
  24. 80 handle
    Wera 80 handle
    Trusco Part No.  431-6533  Mass (g)  48.8  Square Drive (mm)  Overall Length (mm)  98 
    from S$29.99
    Min. 2 days
  25. Economy Grip
    ENGINEER Economy Grip
    Replacement grip for DR-81-89, 93.
    Bit Size (mm)  (Length) 9  Handle Diameter (Φmm)  15.5  Mass (g)  20  Trusco Part No.  368-7601  Square Drive (mm)  6.35  Overall Length (mm)  93.5 
    from S$12.99
    Min. 2 days
  26. Screw-Adjuster
    SUNFLAG (SHINKI MFG) Screw-Adjuster
    Prevents over-driving of screws during installation, such as cloth pasting or painted base plates (plasterboard / control panel). You can freely adjust the depth of the screw. Compatible with all screws. The completion of work can be confirmed at a glance, preventing damage to screws and bits. Ul... Read More
    from S$14.99
    Min. 2 days
  27. Magnet Screw Catcher
    VESSEL Magnet Screw Catcher
    When attached to a bit or driver, it can be magnetized with a strong magnetic force. The strong magnet catches long course threads firmly. It can be magnetized and demagnetized. Even if it is removed from the bit, the magnetic force remains. If you are concerned about the adhesion of chips, you c... Read More
    from S$84.99
    Min. 2 days
  28. Vis-Pita (for Hex Shank)
    SUNFLAG (SHINKI MFG) Vis-Pita (for Hex Shank)
    Ideal for architectural course thread screws. Because it is an ultra-lightweight type, there is no burden on rotation work. The strength of sinking varies depending on how much the body is pushed. It can be used with a commercially available electric screwdriver or a sun flag replacement screwdri... Read More
    Trusco Part No.  212-2375  Mass (g)  32  Mass of Main Unit (g)  32  Included Accessories  Plus # 2 x 65mm 1 bit 
    Rating:
    80%
    from S$13.99
    Min. 2 days
  29. SDS Plus Extension Holder
    ANEX SDS Plus Extension Holder
    With SDS Plus Shank, a tip tool with a hexagonal axis opposite side of 6.35 mm can be attached to the tip. Compatible with SDS plus hammer drills. For extension of tip tool of SDS plus hammer drill * Please use the SDS hammer drill in rotation mode.
    Square Drive (mm)  6.35 
    Rating:
    100%
    from S$21.99
    Min. 2 days
  30. MAG-PITA
    SUNFLAG (SHINKI MFG) MAG-PITA
    Strong magnet to prevent screws from falling. The super magnetic force reliably catches the screws! The screws will not fall even if you touch them. Insert it into the bit of the hexagonal axis.
    Dimension (mm)  24×15  Mass (g)  Trusco Part No.  853-2476  RoHS directive (corresponding to 10 substances)  Correspondence  Specification  For hexagon shaft 
    Rating:
    20%
    from S$6.99
    Min. 4 days
  31. Stand for Ball-Point Screwdriver Set
    TRUSCO Stand for Ball-Point Screwdriver Set
    You can place it as a stand or hang it on the wall using the hook holes.
    Overall Length (mm)  165  Trusco Part No.  415-8938  Mass (g)  357  Blade Shape  Ball point 
    from S$13.99
    Min. 2 days
  32. Carpenter SUKESAN
    SEK (Suekage Tool) Carpenter SUKESAN
    You can use an electric screwdriver to tighten the nuts of the body inserts in the conventional method. Work efficiency is dramatically improved compared to conventional manual work. For tightening body inserts, double pull bolts, wing plate bolts, etc.
    Hex Width Across (mm)  19 
    Rating:
    100%
    from S$189.90
    Min. 2 days
  33. Craft Foam Compact Micro11
    Wera Craft Foam Compact Micro11
    A carrying case that can be securely stored. Ideal for assembling electronic parts. A set dedicated to precision work.
    Trusco Part No.  766-0766  Shank Diameter (Φmm)  Mass (g)  141 
    from S$139.90
    Min. 32 days
  34. Handle for Quick-Ball 60 Ratchet Screwdriver
    ANEX Handle for Quick-Ball 60 Ratchet Screwdriver
    A ratchet mechanism that allows you to work with one hand. It rotates smoothly with 60 gears, has little rotation loss, and has excellent workability. It can be used for electric screwdriver bits with an opposite side of 6.35 mm.
    Overall Length (mm)  95  Trusco Part No.  494-2604  Mass (g)  125 
    from S$21.99
    Min. 2 days
  35. MAG-PITA
    SUNFLAG (SHINKI MFG) MAG-PITA
    A strong magnet that prevents the screw from falling on the round shaft. Make sure to catch the screw! Insert it into the bit of the round shaft.
    Dimension (mm)  24×15  Mass (g) 
    from S$5.39
    Min. 7 days
  36. Ball Grip Screwdriver for Changeable Bits
    TRUSCO Ball Grip Screwdriver for Changeable Bits
    It can be used as a driver by inserting a bit with a shank diameter of 6.35 mm. A ball grip that fits comfortably in your hand. Charging bit can be used Heaton can be turned.
    Handle Diameter (Φmm)  41  Trusco Part No.  765-2411  Overall Length (mm)  100  Mass (g)  60  Outer Diameter (Φmm)  100 
    from S$8.69
    Min. 3 days
  37. NEJIPITA
    JEFCOM (DENSAN) NEJIPITA
    Securely fix the screw with a strong magnet Can be used for most bits Ideal for architectural course thread screws Because it is an ultra-lightweight type, diagonal striking that does not impose a burden on rotating work is also OK Any bit made of aluminum alloy with a total length of 65 mm or mo... Read More
    Width Across Flats (mm)  6.35 (axis)  Mass of Main Unit (g)  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$18.99
    Min. 4 days
  38. One-Touch Drill Chuck
    SUNFLAG (SHINKI MFG) One-Touch Drill Chuck
    Tip tools such as pilot hole drills can be easily attached and detached with the bit attached.
    Chucking Size (mm)  1.0~6.5mm  Mass (g)  170  Trusco Part No.  776-8648 
    Rating:
    100%
    from S$33.99
    Min. 2 days
  39. B-Holder
    SUNFLAG (SHINKI MFG) B-Holder
    For storing bits. For original key chains. Smooth attachment / detachment! Double slide type For carrying the 6.35mm hexagonal shaft.
    RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    40%
    from S$9.29
    Min. 7 days
  40. WISE Return Handle SP
    WISE (Wakahoi Seisakusho) WISE Return Handle SP
    By using the return handle, you can continue from fast turning to final tightening at the ball point.
    Overall Length (mm)  240  Trusco Part No.  494-3554 
    from S$29.99
    Min. 6 days
View : Grid List
Filter

Items 1 - 40 of 97

Set Ascending Direction