Ratchet function with good work efficiency. This one can be used for most screws. You can quickly turn around with your fingertips. Most commercially available bits can be used.
It can be used for most household screws, eye bolts, thumbscrews, knobs, cocks, etc.
Type Electric Driver / Replaceable Driver Material (Grip) Resin Tip Shape Plus or minus Set Contents Single item RoHS directive (corresponding to 10 substances) Correspondence Cutting Edge Magnet Yes Shaft Penetration None
Handle for 3.5mm hexagonal shaft blade (53 series). Since the grip end rotates, it can be easily turned quickly. The grip surface has a satin finish to prevent slipping.
Shank Diameter (Φmm) 3.5 Mass (g) 11 Shaft Diameter (inch) - Material (Shaft) - Material (Grip) - Set Contents Single item Square Drive (inch) - Cutting Edge Magnet - Shaft Penetration -
Comes with a low-voltage voltage detection grip. (AC80-300V / DC100-250V)
For repair and maintenance work.
Mass (g) 302 Type Set product Material (Grip) Resin Set Contents Set product RoHS directive (corresponding to 10 substances) Correspondence Cutting Edge Magnet None Shaft Penetration None
With a total length of 33 mm, it is half the length of a general stubby screwdriver, making it ideal for work in tight spaces. Since the bit is a replaceable type, this one can handle +2 and -6 screws. A commercially available 6.35 hexagonal short bit can be used.
Mass (g) 16 Type Stubby driver / Replaceable driver Handle Diameter (Φmm) 30 Material (Grip) CA Tip Shape Plus or minus Set Contents Single item Cutting Edge Magnet None Shaft Penetration None
A set of 3 types of double-headed bits and a "ball grip bit replacement grip" that can be used as a hand driver by inserting a bit for an electric screwdriver (opposite side 6.35 mm). The grip is a familiar ball grip. [[+]] 1 and [[+]] 3, can be used for quick-connect terminals [[-]] of... Read More
Mass (g) 142 Tip Size [[+]]1/[[+]]3、[[-]]6/[[+]]2、PZ2/PZ3 Handle Diameter (Φmm) 41 Material (Grip) Grip: Polypropylene Item Quantity per Set 4 points Tip Shape Plus, Minus, Pozidriv Set Contents Set product Cutting Edge Magnet Yes
Fits in the palm of your hand. Ergonomic handle. The driver shaft is chrome vanadium steel, and the whole body is hardened to make it tough. Color-coded colorful replacement shaft. A horizontal single-row stand that is easy to take out.
Type Set product Handle Diameter (Φmm) 28 Material (Grip) Resin Tip Shape minus, plus, etc. Set Contents Set product Cutting Edge Magnet Yes Shaft Penetration None
A replaceable screwdriver that can use an electric screwdriver bit (6.35 mm hexagonal axis across flats). Heaton and thumbscrews can be turned at the rear end of the handle. The minus part of the bit has a special shape that can be inserted into the removal hole of the terminal.
+ No.2, -6 screwd... Read More
Mass (g) 90 Type Replaceable screwdriver Handle Diameter (Φmm) 42 Material (Shaft) Chrome, molybdenum, vanadium steel Material (Grip) PP、TPE Tip Shape Plus or minus Set Contents Single item Cutting Edge Magnet Yes Shaft Penetration None
Starby type ideal for working in tight spaces. You can use an electric bit. The handle is made of elastomer resin that does not hurt your hands even if you put effort into it.
Mass (g) 40 Type Stubby driver / Replaceable driver Handle Diameter (Φmm) 33 Material (Shaft) Chrome, molybdenum, vanadium steel Material (Grip) PP、TPE Tip Shape Plus or minus Set Contents Single item RoHS directive (corresponding to 10 substances) Correspondence Cutting Edge Magnet Yes Shaft Penetration None
This single bit can handle 4 sizes of screws # 1, 2, 3, and 6.0. The minus part of the bit can be used for work without damaging the PC part when attaching / detaching the immediate connection terminal / wiring.
Replacement bit for replacement driver.
* Only for manual rotation. Do not use for im... Read More
Mass (g) 32 Type bit Material (Shaft) Special steel Tip Shape Plus or minus Set Contents Single item Tip Size (#) No.1・No.2・No.3
A bit exchangeable screwdriver that can loosen crushed countersunk screws and cap bolts. The DBZ-51 can be loosened without hitting when the Phillips screw is crushed mildly, and it can be loosened by hitting it with the DBZ-52 when it is severely crushed. DBZ-53 can be loosened by tapping even i... Read More
Mass (g) 160 Type Set product Material (Shaft) High carbon steel Material (Grip) ABS, nylon Set Contents Set product RoHS directive (corresponding to 10 substances) Correspondence Material (rubber) Elastomer Cutting Edge Magnet None Shaft Penetration None
A set of a "ball grip bit replacement grip" that can be used as a hand driver by inserting a bit for an electric screwdriver (opposite side 6.35 mm) and a double-headed bit. The grip is a familiar ball grip. A bit for 2 sizes that incorporates the [[-]] cutting edge that can be used for... Read More
Mass (g) 90 Tip Size [[+]]2、[[-]]6 Handle Diameter (Φmm) 41 Material (Grip) Grip: Polypropylene Tip Shape Plus or minus Set Contents Single item Cutting Edge Magnet Yes
Ultra-shortest stubby screwdriver Ideal for narrow spaces With a cushion ring to prevent slipping Ideal for fine adjustment of deep groove grip bit replaceable type screws where force is applied to the fingertips. Remove the cushion ring.
* Color cannot be specified for # 99.
Handle Diameter (Φmm) 30 Material (Grip) Resin Tip Shape Plus or minus RoHS directive (corresponding to 10 substances) Correspondence Cutting Edge Magnet None Shaft Penetration None
A convenient function screwdriver that has 6 types of bits built into the handle and can be replaced internally without taking apart. Acquired worldwide patent including Japan. (Japanese Patent No.1839734, US Patent No.4463788) Compact body with outstanding functionality.
Shank Diameter (Φmm) 30 Mass (g) 210 Type Set product Material (Shaft) Molybdenum vanadium steel Material (Grip) Glass fiber reinforced nylon resin Set Contents Set product Cutting Edge Magnet None Shaft Penetration None
The handle uses a soft cushion grip. Four types of bits can be stored in one handle. It is convenient for carrying.
Color Grip: orange Mass (g) 90 Type Set product Material (Shaft) Chrome vanadium steel Material (Grip) Elastomer resin Set Contents Set product Cutting Edge Magnet None Shaft Penetration None
Wide handle for power. Ultra-short type that can be used in narrow spaces.
Mass (g) 34 Type Set product Handle Diameter (Φmm) 40 Material (Shaft) Chrome, molybdenum, vanadium steel Material (Grip) CA Tip Shape Plus or minus Set Contents Set product Cutting Edge Magnet None Shaft Penetration None
The handle is a cushion grip with an outstanding texture. The shaft is chrome-vanadium steel, fully hardened. It is a double-headed replacement type.
Mass (g) 93 Type Stubby driver / Replaceable driver Handle Diameter (Φmm) 35 Material (Grip) Resin Tip Shape Plus or minus Set Contents Single item Tip Size (#) No.2 Cutting Edge Magnet Yes Shaft Penetration None
Compatible with bits for electric screwdrivers, 6.35 mm hexagonal shaft bits, etc. (Compatible with bits with a total length of 65 mm or more) Deep insertion of the bit suppresses rattling and enables stable screw turning. It is a handle with strong force and comes with an eye bolt.
Specification Handle Mass (g) 53 Material (Grip) PP、TPE Set Contents Single item Cutting Edge Magnet None Shaft Penetration None
With a rubber grip that is easy to put in force One set for each family with frequently used sizes. The definitive edition of home tools. 8-piece screwdriver set For assembling furniture, etc. For tightening and loosening screws and screws DIY essentials.
Set Contents Set product Mass (g) 126 Material (Shaft) High carbon steel Material (Grip) PVC Tip Shape plus, minus, cone Cutting Edge Magnet None Shaft Penetration None
Birth of Nejizaurus' companion. -Equipped with safe functions for screw troubles!- Unique design designed for efficient use of Nejizaurus Bazooka Mogura. Since the iron core of Φ10mm is penetrated, the impact of the hammer is transmitted to the tip as it is. Bolster size 13mm opposite side. H... Read More
Shank Diameter (Φmm) 6.35 Mass (g) 146 Handle Diameter (Φmm) 38 Material (Grip) Elastomer Set Contents Single item Cutting Edge Magnet None Shaft Penetration Yes
Specification With magnetic shaft Shank Diameter (Φmm) 6.3 Hex axis Mass (g) 88 Type Replaceable screwdriver Handle Diameter (Φmm) 42 Material (Grip) Polypropylene & elastomer resin Tip Shape Plus or minus Set Contents Single item Tip Size (#) No.1・No.2・No.3 Cutting Edge Magnet Yes Shaft Penetration None
Comes with a bolster that can be tightened and loosened with a spanner. The plus part has a double protrusion for excellent biting. The minus part has a special shape that can be inserted into the removal hole of the outlet terminal. The bolster is 12 mm on the opposite side. With tip magnet.
Mass (g) 140 Type Replaceable screwdriver Material (Grip) PP、TPE Tip Shape Plus or minus Set Contents Single item Tip Size (#) No.2 Cutting Edge Magnet Yes Shaft Penetration None Tip Size (Blade Width x Thickness) (mm) 6×0.8
A screwdriver that can be used in two sizes with one
* Do not use in places where electricity is flowing. * The total length is the length when the handle is set.
Type Replaceable screwdriver Handle Diameter (Φmm) 29.5mmΦ Material (Grip) Resin Tip Shape Plus or minus Set Contents Single item Cutting Edge Magnet None Shaft Penetration None
A screwdriver that can be used in two sizes with one. A great deal on a set of three. With zipper case.
* Do not use in places where electricity is flowing. * The total length is the length when the handle is set.
Included Accessories Chuck case Shank Diameter (Φmm) 3(D-52)、5(D-54)、6(D-58) Mass (g) 161 Type Set product Tip Size 3(D-52)、5(D-54)、6(D-58) Handle Diameter (Φmm) 29.5 Material (Grip) Resin Tip Shape Plus or minus Quantity per Set (pieces) 3 Set Contents Set product Cutting Edge Magnet None Shaft Penetration None
Compatible with bits for electric screwdrivers, 6.35 mm hexagonal shaft bits, etc. (Compatible with bits with a total length of 65 mm or more) Deep insertion of the bit suppresses rattling and enables stable screw turning. A spanner can be used.
Specification Handle Mass (g) 92 Material (Grip) PP、TPE Set Contents Single item Cutting Edge Magnet None Shaft Penetration None
A special grip for screw bazookas and screw mogura that can loosen crushed countersunk screws and cap bolts. Maximize bit performance with an ergonomic design.
Mass (g) 83 Material (Grip) ABS, nylon Set Contents Single item RoHS directive (corresponding to 10 substances) Correspondence Cutting Edge Magnet None Shaft Penetration None
Bit replacement type driver. Tough hexagonal holder that can be tightened with a spanner, etc. Easy-to-turn, non-slip cushion grip. All commercially available rechargeable screwdriver bits can be used (total length of 65 mm or more).
Shank Diameter (Φmm) 6.35 Type Replaceable screwdriver Tip Size (Hex holder) 12 Handle Diameter (Φmm) 31 Material (Shaft) Industrial special steel Material (Grip) Resin Tip Shape Plus or minus Set Contents Single item RoHS directive (corresponding to 10 substances) Correspondence Cutting Edge Magnet Yes Shaft Penetration None Tip Size (Blade Width x Thickness) (mm) 6.1×0.9
Japan's smallest 2-WAY stubby. Very convenient for work in narrow spaces. The "dent" on the top of the handle allows you to fix the main body with your fingers and rotate it smoothly.
Type Stubby driver / Replaceable driver Handle Diameter (Φmm) 28 Material (Grip) Resin Set Contents Single item Cutting Edge Magnet None Shaft Penetration None
A bit-replaceable screwdriver that allows you to remove the crushed Phillips screwdriver. By replacing the hammer-free bit that can be removed without hitting, it is compatible with screws of various shapes and crushing conditions. The grip with an ergonomic design maximizes the performance of th... Read More
Set Contents Set product Mass (g) 131 Material (Shaft) High carbon steel Material (Grip) ABS, nylon Cutting Edge Magnet None Shaft Penetration None
Birth of Nejizaurus' companion. -Equipped with safe functions for screw troubles!- Equipped with a screw Zaurus bazooka that can be removed without hitting the tanned countersunk screw. In most cases, even if the cross screw is licked, the outermost circumference remains undamaged. The tip of... Read More
Shank Diameter (Φmm) 6.35 Mass (g) 170 Handle Diameter (Φmm) 38 Material (Shaft) High carbon steel Material (Grip) Elastomer Set Contents Single item Included Bit DBZ-51 Cutting Edge Magnet None Shaft Penetration Yes
One screwdriver Phillips bit compatible with 4 sizes, and one with special processing compatible with #1, #2, and #3 screws. Suitable for most screws. Compatible with Heaton, it can be used for most screws, Heaton, butterfly screws, knobs, cocks, etc. in your home.
Mass (g) 40 Type Replaceable screwdriver Handle Diameter (Φmm) 36 Material (Grip) Resin Tip Shape Plus or minus Set Contents Single item RoHS directive (corresponding to 10 substances) Correspondence Cutting Edge Magnet Yes Shaft Penetration None
Wide (large) handle with strong force improves screw tightening and loosening power! Bit replacement type.
Ideal for working in tight spaces.
Mass (g) 25 Type Stubby driver Handle Diameter (Φmm) 40 Material (Shaft) Chrome, molybdenum, vanadium steel Material (Grip) CA Tip Shape Plus Set Contents Single item Cutting Edge Magnet None Shaft Penetration None
There are 2 types of tip sizes and 3 levels of shaft length. It can be used even in narrow spaces. Convenient for storage The short shaft shape has good torque transmission and is easy to final tighten. It can be used even in deep places where the tip of the shaft is thin.
Ideal for assembly and ... Read More
Set Contents Set product Shank Diameter (Φmm) 6.35 (opposite side) Type Set product Material (Shaft) Industrial special steel Material (Grip) Resin Tip Shape Plus RoHS directive (corresponding to 10 substances) Correspondence Cutting Edge Magnet Yes Shaft Penetration None
Bit replacement type driver. A tough hexagon holder that can be tightened with a spanner or the like. Cushion grip that is easy to turn and does not slip easily. A powerful grip that can be hit even though it is a replacement type. All commercially available charging driver bits can be used (tota... Read More
Shank Diameter (Φmm) 6.0 Mass (g) 145 Type Replaceable screwdriver Tip Size (Hex holder) 12 Handle Diameter (Φmm) 31 Material (Shaft) Industrial special steel Material (Grip) Resin Tip Shape Plus Set Contents Single item RoHS directive (corresponding to 10 substances) Correspondence Cutting Edge Magnet Yes Shaft Penetration None
A replacement nut driver is set in the plastic case, making it convenient to carry.
For repair and maintenance work.
Specification 6-piece replacement nut set Mass (g) 365 Type Set product Material (Grip) Resin Tip Shape Socket (box) Set Contents Set product RoHS directive (corresponding to 10 substances) Correspondence Cutting Edge Magnet None Shaft Penetration None
Since the bit expands and contracts from 25 mm to 100 mm (stepless adjustment), it can be used for both normal work and deep work. The + side is a replacement type compatible with No. 1 and 2 (6.35 mm square, so it can be replaced) with a safety power-up cap (hanger part can be separated and used)
Shank Diameter (Φmm) 6.35 Type Replaceable screwdriver Handle Diameter (Φmm) 23 Material (Grip) Resin Tip Shape Plus or minus Set Contents Single item RoHS directive (corresponding to 10 substances) Correspondence Cutting Edge Magnet Yes Shaft Penetration None
A set of "cushion stubby grip" that can be used as a hand driver by inserting a bit for an electric screwdriver (opposite side 6.35 mm) and a double-headed bit. The grip is a stubby type that is ideal for narrow spaces. A bit for 2 sizes that incorporates the [[-]] cutting edge that can... Read More
Mass (g) 42 Tip Size [[+]]2、[[-]]6 Handle Diameter (Φmm) 35 Material (Grip) Grip: Polypropylene Tip Shape Plus or minus Set Contents Single item Cutting Edge Magnet Yes
The ball chuck type reliably catches the bit. Electric / charging driver bit can be used. This is OK for screw tightening at home! A stubby type that demonstrates its power in a limited space.
Handle Diameter (Φmm) 35 Tip Shape hexagonal Set Contents Single item Cutting Edge Magnet Yes
It is a dedicated replacement shaft for the replacement driver. A bit with a strong magnet.
For electrical work, furniture assembly, maintenance, in-vehicle use, etc.
Specification Full-body quenching magnet included Mass (g) 26 Material (Shaft) Industrial special alloy steel Set Contents Single item Applicable shaft 220W / 220W-3 / 220W-62 / 220W-123