All Category

Pipe Cutters

A plumbing cutter is a tool for cutting copper, aluminum, stainless steel and plastic pipes during plumbing. Plumbing cutters equipped with braided metal blades, such as alloys, often use a ratchet mechanism, and are characterized by the ability to cut thick pipes with less force. The handle type tube cutter is recommended when you want to cut metal such as copper tube. If the sharpness deteriorates, there is a replaceable blade type, so it can be used economically. Choose an item depending on the material of the pipe you want to cut.
View : Grid List
Filter

Items 1 - 40 of 1031

Set Ascending Direction
  1. Pipe Cutter
    MonotaRO Pipe Cutter
    Aluminum, copper pipes and PVC pipes can be cut by tightening and turning the handle. It can be cut without producing chips. * Please note that the tip of the spare blade and the cut end of the cut pipe are sharp, so there is a risk of damage if you touch them directly with your fingers. * Do not... Read More
    Rating:
    78%
    from S$16.99
    Min. 2 days
  2. Pipe cutter
    SK (Niigata Seiki) Pipe cutter
    Reliable cutting without chips is possible. The cut surface can be finished with a deburring cutter. Cutting of pipes such as copper, lead, iron, aluminum, PVC pipes, stainless steel, etc. * For stainless steel, please purchase a spare blade for stainless steel, which is sold separately.
    Thickness (mm)  34  Included Accessories  1 replacement blade (for general use)  Specification  With deburring cutter  Maximum cutting thickness (mm)  2.5 
    Rating:
    83%
    from S$46.99
    Min. 2 days
  3. Tube cutter
    LOBSTER (LOBTEX) Tube cutter
    Mass (g)  200 
    Rating:
    90%
    from S$75.99
    Min. 2 days
  4. Cutter Replacement Blade for Stainless Steel Tube
    Rex Industries Cutter Replacement Blade for Stainless Steel Tube
    Spare blade for Rex pipe machine For stainless steel pipe
    Trusco Part No.  122-9222  Mass (g)  50 
    Rating:
    100%
    from S$46.99
    Min. 2 days
  5. Handy protector molding cutter
    KEIBA Handy protector molding cutter
    A special tool for cutting resin wiring moldings. For right angle, 45 degree cutting. The one-touch mechanism allows opening with one hand. The blade will not open unless it is released with a safety stopper. Replaceable blade type that can be easily replaced. Lightweight type made of aluminum al... Read More
    Dimension C (mm)  51  Dimension D (mm)  18  Overall Length (mm)  317  Dimension A (mm)  317  Dimension B (mm)  104  Material  Aluminum alloy  Cutting Capacity  Up to 100mm  Mass (g)  670 
    from S$249.90
    Min. 2 days
  6. Quick action tube cutter 205-S
    RIDGID (Emerson Japan) Quick action tube cutter 205-S
    Trusco Part No.  435-8571 
    from S$339.90
    Min. 5 days
  7. Tube cutter for thin wall tube 15
    RIDGID (Emerson Japan) Tube cutter for thin wall tube 15
    Trusco Part No.  495-0712 
    from S$99.90
    Min. 4 days
  8. Tube cutter for plastic pipe
    Virax Tube cutter for plastic pipe
    A replacement blade for tube cutters for plastic tubes. A high quality tube cutter made in France. Three rollers provide excellent workability. For plastic tubes.
    2018 Trusco page  4 1349  Trusco Part No.  856-2029  Mass (kg) 
    from S$679.90
    Min. 32 days
  9. Replacement blade for PVC pipe cutter
    Virax Replacement blade for PVC pipe cutter
    A spare blade for a PVC pipe cutter 42 mm.
    2018 Trusco page  4 1337  Mass (g)  100  Trusco Part No.  856-2004  Suitable Model  215042 
    from S$67.99
    Min. 3 days
  10. PVC Cutter
    MCC PVC Cutter
    Easy and fast, quick cut. Clean cutting and clean cutting that does not generate any chips. Outstanding sharpness, beautiful cut, quality cut.
    Rating:
    92%
    from S$58.99
    Min. 2 days
  11. Molding cutter
    MonotaRO Molding cutter
    Corner cut of resin molding is possible !! The angle can be adjusted in 4 steps. (90, 75, 60, 45 °) Can cut up to 20 mm for moldings, hoses, raw wood, ropes, etc. * Do not use for anything other than its intended purpose.
    Mass (g)  410  Maximum opening diameter (mm)  55  Blade Length (mm)  70  Angle Adjustment Range  90、75、60、45°  Width (mm)  About 102  Overall Length (mm)  About 222  Overall Height (mm)  About 60 
    Rating:
    92%
    from S$38.99
    Min. 2 days
  12. Tube cutter mini
    MonotaRO Tube cutter mini
    Aluminum, copper pipes and PVC pipes can be cut by tightening and turning the handle. It can be cut without producing chips. Cuttable wall thickness: Stainless steel (up to 1 mm), aluminum / copper pipe (up to 2 mm), brass (up to 1.5 mm), PVC (up to 3 mm) * Please note that the tip of the spare b... Read More
    Mass (g)  About 111  Applicable Pipe Diameter (inch)  1/8~7/8  Suitable Pipe Diameter (Φmm)  3~22  Overall Length (mm)  About 64 
    Rating:
    75%
    from S$8.39
    Min. 2 days
  13. Tube Cutter [for Copper, Aluminum, Hard PVC Pipe, Steel Pipe, Thin Stainless Steel (1mm or Less)]
    SUPER TOOL Tube Cutter [for Copper, Aluminum, Hard PVC Pipe, Steel Pipe, Thin Stainless Steel (1mm or Less)]
    Excellent sharpness with no chips. The cut is refreshing.
    Replacement Blades  TCC 105E 
    Rating:
    93%
    from S$22.99
    Min. 2 days
  14. PVC cutter V-shaped blade type
    MonotaRO PVC cutter V-shaped blade type
    Uses a V-shaped blade to easily cut hard PVC pipes! In addition, the ratchet mechanism makes it easy to cut. The one-touch open function allows speedy opening and closing. Cutting the envelope pipe. Wiring protector molding disconnection. * If you forcibly cut a material other than the compatible... Read More
    Overall Length (mm)  225  Mass (g)  410  Cutting Capacity (Φmm)  45 (maximum) 
    Rating:
    72%
    from S$35.99
    Min. 2 days
  15. Spare blade tube cutter for pipe
    MonotaRO Spare blade tube cutter for pipe
    As a replacement blade for tube cutters * Please note that the tip of the spare blade is sharp, so there is a risk of damage if it comes into direct contact with your fingers. * Do not use for any other purpose. Please note that incorrect use may cause an accident.
    Outer Diameter (Φmm)  18.5 
    Rating:
    88%
    from S$2.99
    Min. 2 days
  16. Envi cutter spare blade (VCE)
    MCC Envi cutter spare blade (VCE)
    Rating:
    98%
    from S$22.99
    Min. 2 days
  17. Tube Cutter Quick Setting Type
    MonotaRO Tube Cutter Quick Setting Type
    A tube cutter with excellent workability that allows you to set the start of cutting with a single touch. The burrs after cutting can be finished with the attached deburring cutter. Cutting iron, copper and aluminum pipes * Do not use for any purpose other than its intended purpose.
    Mass (g)  380  Pipe Diameter (Φmm)  6~50  Thickness (mm)  36  Included Accessories  Spare blade for general use x 1  Overall Length (mm)  177  Overall Width (mm)  75  Maximum cutting thickness (mm)  3.5 
    Rating:
    87%
    from S$35.99
    Min. 2 days
  18. Replacement Blade for Tube Cutter
    SUPER TOOL Replacement Blade for Tube Cutter
    The material of the cutter foil is special alloy steel, and the optimum heat treatment realizes sharpness and tough durability.
    Rating:
    93%
    from S$11.99
    Min. 2 days
  19. Bearing Fitted Tube Cutter
    SUPER TOOL Bearing Fitted Tube Cutter
    Scut from stainless steel pipes to copper pipes! For stainless steel, steel, copper, aluminum, brass, hard PVC pipes
    Rating:
    90%
    from S$46.99
    Min. 2 days
  20. Stainless Steel Flexible Pipe Cutter (For Single Mountain Corrugated Pipes)
    SUPER TOOL Stainless Steel Flexible Pipe Cutter (For Single Mountain Corrugated Pipes)
    ● No chips and excellent sharpness. The cut is refreshing. ● The cutter wheel is made of special alloy steel and is heat-treated optimally to achieve further sharpness and toughness. ● For cutting stainless flexible pipes (single mountain corrugated pipes) and coated flexible pipes.
    Rating:
    92%
    from S$48.99
    Min. 2 days
  21. Pipe cutter one-touch lock type
    SK (Niigata Seiki) Pipe cutter one-touch lock type
    The starting point of cutting can be set with a single touch, and the cut surface can be finished with a deburring cutter that is excellent for workability. Strong type with maximum cutting capacity of 3.5 mm Cutting of pipes such as copper, lead, iron, aluminum, PVC pipes, stainless steel, etc. ... Read More
    Pipe Diameter (Φmm)  6~50  Thickness (mm)  38  Maximum cutting thickness (mm)  3.5  Mass (g)  380  Specification  With deburring cutter  Included Accessories  1 replacement blade (for general use)  Overall Width (mm)  70  Overall Length (mm)  175 
    Rating:
    80%
    from S$58.99
    Min. 2 days
  22. Pipe Cutter Replacement Blade
    SK (Niigata Seiki) Pipe Cutter Replacement Blade
    Excellent sharpness Please use according to the main body
    Thickness (mm) 
    Rating:
    97%
    from S$12.99
    Min. 2 days
  23. Bearing Tube Cutter Replacement Blade
    SUPER TOOL Bearing Tube Cutter Replacement Blade
    Stainless steel, steel, copper, aluminum, brass, hard PVC pipe
    Rating:
    100%
    from S$16.99
    Min. 2 days
  24. PVC Cutter
    SUPER TOOL PVC Cutter
    One-action opening mechanism (when the handle is fully extended, the blade automatically opens to the maximum). The ratchet mechanism makes it easy and speedy to cut with one hand. Excellent sharpness with no chips. The cut is refreshing. The VK42N can be cut diagonally at 90 ° and 45 ° for wirin... Read More
    Material  Aluminum alloy  Finish  Champagne gold baking finish 
    Rating:
    70%
    from S$44.99
    Min. 2 days
  25. Single pipe / scaffolding pipe cutter
    GISUKE (Takagi) Single pipe / scaffolding pipe cutter
    Can cut stainless steel pipes! HSS blade. Scaffolding single pipe can also be cut. Built-in deburring knife. For cutting stainless steel, steel, copper, brass, aluminum and PVC pipes. * The attached spare blade is SB-6222HS (11-19456)
    Maximum Cutting Capacity (mm)  (Thickness) 4  Cutting Capacity (Φmm)  16~50  Material (Handle)  Aluminum  Material  Aluminum  Material (Blade)  HSS 
    Rating:
    68%
    from S$49.99
    Min. 2 days
  26. Tube Cutter
    TRUSCO Tube Cutter
    It is a thin blade strong type and has excellent sharpness. Great for cutting in tight spaces. For cutting copper, aluminum, brass, and hard PVC pipes.
    Overall Length (mm)  67  Cutting Capacity  3 / 16-7 / 8 inch (4-22mm)  Wall Thickness (mm)  Specification  Standard replacement blade GFC-15NC  Trusco Part No.  416-2668  Mass (g)  126 
    Rating:
    94%
    from S$22.99
    Min. 2 days
  27. Ratchet Pipe Cutter Replacement Blade
    KTC Ratchet Pipe Cutter Replacement Blade
    Rating:
    100%
    from S$29.99
    Min. 2 days
  28. Stainless steel tube cutter
    TASCO Stainless steel tube cutter
    It can also cut iron pipes and stainless steel pipes. Comes with 1 spare blade. Standard mounting blade (TA560AS-1)
    Wall Thickness (mm)  (Maximum) 3  Applicable copper pipe diameter  1/8″~1-1/4″(3.18~31.75mm)  Overall Length (mm)  128 
    Rating:
    100%
    from S$44.99
    Min. 2 days
  29. Tube Cutter (For Copper, Aluminum, Brass, Hard Pvc Pipe)
    SUPER TOOL Tube Cutter (For Copper, Aluminum, Brass, Hard Pvc Pipe)
    Excellent sharpness with no chips. The cut is refreshing. TC205 has a built-in chamfering knife and spare blade.
    Rating:
    90%
    from S$22.99
    Min. 2 days
  30. Spare blade
    SUPER TOOL Spare blade
    Rating:
    73%
    from S$16.99
    Min. 2 days
  31. Frepoly Cutter
    SUPER TOOL Frepoly Cutter
    Cut soft resin pipes such as resin flexible pipes, sheath pipes, polybuden pipes, etc. quickly! By mounting the blade in reverse, it can be used twice and is very economical. Non-slip grooved grip.
    Mass (g)  155  Trusco Part No.  321-6489  Material  Aluminum alloy  Finish  Champagne gold baking finish  Cutting Capacity (Φmm)  Φ38 or less 
    Rating:
    93%
    from S$33.99
    Min. 2 days
  32. Tube cutter
    TRUSCO Tube cutter
    It is a thin blade strong type and has excellent sharpness. The knob has a spare blade (GFC-111NC 1 piece). For cutting copper, aluminum, brass, and hard PVC pipes.
    Cutting Capacity  1/8 to 1 1/4 inch (3 to 32mm)  Overall Length (mm)  130  Trusco Part No.  416-2676  Wall Thickness (mm)  Specification  Standard replacement blade GFC-111NC  Mass (g)  261 
    Rating:
    72%
    from S$34.99
    Min. 2 days
  33. Ratchet Pipe Cutter (Steel Pipe for Stainless Steel Pipe)
    KTC Ratchet Pipe Cutter (Steel Pipe for Stainless Steel Pipe)
    The automatic feed mechanism keeps a constant feed amount (force) and does not apply excessive force. The handle swing angle is 8 ° and cutting is possible. Great for cutting in tight spaces. By adopting a ratchet mechanism, it is possible to cut easily and quickly even in a narrow space. The bod... Read More
    Stainless Steel Pipe Max. Wall Thickness (mm)  3.0  Specification  Standard replacement blade: PCRK-FS 
    Rating:
    100%
    from S$559.90
    Min. 2 days
  34. Pipe cutter spare blade HSS
    GISUKE (Takagi) Pipe cutter spare blade HSS
    For cutting stainless steel, steel, copper, brass, aluminum and PVC pipes.
    Type  For Stainless steel  Material (Blade)  HSS 
    Rating:
    80%
    from S$16.99
    Min. 2 days
  35. Resin tube cutter
    MCC Resin tube cutter
    The cutting blade uses a V-shaped edge that is easy to cut. The V-shaped edge suppresses the deformation of the tube and has a beautiful finish. Easy to operate, quick cut like scissors. A palm-sized lightweight and compact design that anyone can cut easily and quickly. Spare blade type
    Overall Length (mm)  190  Mass (g)  220  Trusco Part No.  342-8303  Replacement Blades  JTCE37 
    Rating:
    93%
    from S$67.99
    Min. 2 days
  36. Molding cutter
    JOB Master Molding cutter
    Corner cut is possible! 90 degree, 45 degree left and right cut with molding guide Highest grade blade steel used (SK-5) Fluororesin processed anvil type Cutting up to 20 mm for moldings, hoses, raw wood, ropes, etc.
    Overall Length (mm)  205  Mass (g)  280  Blade Length (mm)  45 
    Rating:
    68%
    from S$58.99
    Min. 2 days
  37. DM single tube cutter
    DeniMan DM single tube cutter
    Cutting of pipes such as lead, iron, stainless steel (using a spare blade for stainless steel sold separately), aluminum, PVC, etc. On the side, burrs formed at the cut end of the pipe after cutting can be scraped off with a chamfering knife. For cutting Φ16mm-50mm. * The attached blade is for co... Read More
    Material  Aluminum die-cast 
    Rating:
    64%
    from S$44.99
    Min. 2 days
  38. DM single tube cutter spare blade
    DeniMan DM single tube cutter spare blade
    TC-50C is a genuine TC-50 blade. TC-50CH is a high-speed steel blade recommended for those who cut a lot of stainless steel.
    Rating:
    55%
    from S$9.29
    Min. 2 days
  39. PVC cutter
    HIT PVC cutter
    One-touch open function! The body is even lighter and more compact! Tool-free replaceable blade exchange type
    Overall Length (mm)  235  Mass (g)  385  Maximum Cutting Capacity (mm)  42  Recycled paper use mark  Conformity  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    90%
    from S$48.99
    Min. 2 days
  40. Spare blade for tube cutter
    Imperial Spare blade for tube cutter
    Suitable Model  Tube cutter  Dimension b (mm)  Dimension a (mm)  17.1  Dimension c (mm) 
    Rating:
    100%
    from S$9.69
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 1031

Set Ascending Direction