Pipe Cutters
A tool that cuts pipes such as electric pipes, air pipes, and water pipes is a pipe cutter. After inserting the pipe into the tool, cut it while screwing the cutting blade. The size of the pipe that can be cut depends on the type of cutter, but it is generally up to 3 inches inside diameter. Use a chain pipe cutter to cut a pipe that is in a place where the cutter cannot enter. There are special tools for pipe cutters depending on the type of pipe to be cut, such as iron, PVC, and flexible pipes, so it is important to determine whether to apply to the pipe to be cut. There is a dedicated pipe cutter for pipes with a large diameter of 6 inches such as ductile cast iron pipe.
Other Related Pages
Rex Industries Pipe cutterHas excellent sharpness and durability. Cutting steel pipeType Pipe cutter- GRIP-ON TOOLS S.A Chain pipe cutterMaterial Forged steel, epoxy resin Pipe Diameter to Grip (Φmm) 15-75
- MCC Single pipe cutterIdeal for cutting pipes for temporary scaffolding, agricultural work, greenhouses, etc.
- SSPOWER Single pipe cutterYou can cut pipes easily and speedily. Easy-to-grasp T-shaped handle. Deburring is attached. For cutting iron, lead, aluminum, PVC, and stainless steel cans. * Spare blade is not includedCuttable outer diameter (Φmm) 16-50
- HIT Reinforced gas hose cutterIt is a stationary type and can be cut easily. Reinforced gas hose with steel core, air hose, etc. can be cut easily and efficiently.
-
- KAKUDAI MFG Compact pipe cutterIt is ideal for cutting stainless steel flexible pipes and can also be used for copper pipes and drainage pipes. Optimal for work in narrow spaces due to its compact designfrom S$66.99Min. 5 days
- RIDGID (Emerson Japan) C style cutter C34The built-in spring allows you to cut the copper tube without turning the knob. The X-CEL pin (quick change pin) allows you to quickly replace the blade without using a tool. The snap-on function allows you to quickly set it on a copper tube. You can use a flat-blade screwdriver to rotate the bod... Read MoreMass (g) 230 Nominal Diameter 1/2”・3/4” Suitable Pipe Diameter (Φmm) (Outer diameter) 15.88 ・ 22.23 Replacement Blades Standard: 57028 (E-3410)from S$109.90Min. 4 days
- RIDGID (Emerson Japan) 4-flute pipe cutter 42-ADesigned for work in places where full turning is not possible. Type 42-A has a short handle that can be used in tight spaces.Included Accessories 4 powerful bladesfrom S$499.90Min. 5 days
- Rex Industries Pipe cutterGreat for tight spaces. Has excellent sharpness and durability. Cutting of steel pipe.from S$649.90Min. 2 days
- KNIPEX Corrugated pipe cutterEasy to handle. Just squeeze the TwistCut and turn it with a little force. It also supports protective pipes for aluminum composite pipes (maximum diameter 32 mm) in sanitary equipment. It always cuts at the top of the wave, so the cut edges are more accurate and do not damage the internal cables... Read MoreMass (g) 74 Cutting Capacity (Φmm) 13～32from S$76.99Min. 3 days
-
- MCC Inner diameter pipe cutterA right-angled cut of the drainage pipe (environment pipe) from the inside. A cutter with a new concept that cuts PVC pipes from the inside. The blade uses a cutter wheel method that cuts while rotating, and cuts at right angles without damaging the finished floor surface. Clean cutting that does... Read Morefrom S$359.90Min. 4 days
- MCC 4-flute pipe cutterCan be cut at 130 °. The blade that uses high-grade bearings surprisingly reduces the cutting load with smooth rotation. The turning radius is 130 °, which is ideal for work in narrow grooves or in narrow spaces where piping cannot rotate due to obstacles. Uses a one-touch hook function that allo... Read Morefrom S$499.90Min. 4 days
-
- MCC Pipe cutterSpare blade type Ideal for cutting steel pipes (SGP). * The total length is the total length when the pipe with the maximum cutting capacity is added.from S$149.90Min. 3 days
-
- Rex Industries Cutman RB50Reciprocating motion cutting type. Great for tight spaces. Has excellent sharpness and durability. Cutting is possible with half the force of conventional products. For steel pipeType 4-flute type Cutting Capacity 1/2～2inch(21～61mm)from S$779.90Min. 3 days
- KNIPEX Plastic pipe cutterIt can cleanly cut plastic pipes (PVC pipes, etc.) with a diameter of 6 mm to 35 mm. The blades are replaceable and can be returned to their original position from any position. With a structure that maximizes the principle of leverage and a unique blade design, pipes can be cut with less force. ... Read MoreMass (g) 583from S$169.90Min. 32 days
- Rex Industries C2 3-flute cutterHas excellent sharpness and durability. Cutting steel pipeType 3-flute type Cutting Capacity 1/8～2inch(10～61mm) Replacement Blades K-2Wfrom S$279.90Min. 5 days
- MCC Byte cutterA manual tool for cutting polyethylene pipes.Replacement Blades PEBIEfrom S$849.90Min. 5 days
- Virax Pipe cutter for steel pipeMade in France with high quality. Cuts steel pipes quickly and cleanly. By exchanging the spare blade, it can be used for other than steel pipes. For steel pipes.2018 Trusco page 4 1328from S$269.90Min. 3 days
-
-
-
- Virax Stainless steel pipe cutter blade replacementIt is a pipe cutter spare blade (for gray cast iron pipe). It is a pipe cutter spare blade (for stainless steel pipe). It is a pipe cutter spare blade (for steel pipes). Pipe cutter spare blade (for ductile cast iron pipe). For steel pipeSuitable Model 210110、210120、210130 Mass (g) 33.6 2018 Trusco page 4 1328from S$86.99Min. 2 days
- RIDGID (Emerson Japan) Hinged pipe cutter (4-flute) 468-HWSDesigned to quickly cut steel pipes with a diameter of 150 to 200 mm, thick-walled steel pipes, and ductile cast iron pipes. Can be cut with the minimum rotation. Ideal for use in tight spaces. * Uses an extra sharp wheel that speeds up cutting by up to 40%.Color Red / Black / Silver Applicable Pipe Diameter (inch) 6～8 Applicable pipe outer diameter (Φmm) 150～200from S$3,399.00Min. 32 days
-
- RIDGID (Emerson Japan) Hinged pipe cutter (4 blades) 466-CIQuickly cut ductile cast iron pipes. It can be cut with the minimum rotation, making it ideal for work in tight spaces. For ductile cast iron pipes.Specification Standard replacement blade 35707 Cutting Capacity 4 to 6 inches (100 to 150mm)from S$2,999.00Min. 4 days
- RIDGID (Emerson Japan) Ceramic pipe cutter 238-PIdeal for cutting existing pipes overhead or underground. Compact design that is convenient for use in tight spaces. You can cut the ceramic tube with the included ratchet or your impact wrench. You can manually cut up to 4 inches and an impact wrench up to 8 inches. For cutting ceramic pipes, dr... Read MoreSpecification 1-1 / 8 "hex impact socket Model 238-Pfrom S$1,899.00Min. 4 days
- RIDGID (Emerson Japan) C style cutter C10The built-in spring allows you to cut the copper tube without turning the knob. The X-CEL pin (quick change pin) allows you to quickly replace the blade without using a tool. The snap-on function allows you to quickly set it on a copper tube. You can use a flat-blade screwdriver to rotate the bod... Read MoreMass (g) 210 Nominal Diameter 1” Suitable Pipe Diameter (Φmm) (Outer diameter) 28.58 Replacement Blades Standard: 57028 (E-3410)
-
- MCC Byte cutterA manual tool for cutting polyethylene pipes. Spare blade type A manual tool for cutting polyethylene pipes.Replacement Blades PEBIEfrom S$789.90Min. 4 days
- Virax Pipe cutter replacement blade for cast iron pipeIt is a pipe cutter spare blade (for gray cast iron pipe). It is a pipe cutter spare blade (for stainless steel pipe). It is a pipe cutter spare blade (for steel pipes). Pipe cutter spare blade (for ductile cast iron pipe). For steel pipe2018 Trusco page 4 1328from S$49.99Min. 3 days
- Rex Industries Link cutterCutting Capacity 80A～250A Adaptation For steel pipe and ductile pipefrom S$3,999.00Min. 3 days
- KNIPEX Composite flexible pipe cutterIt can cut composite pipes with a diameter of 12.0 to 25.0 mm and protective pipes with a diameter of 18.0 to 35.0 mm without damaging the inner surface of the pipe. The blade is replaceable. Geberit pipes with a diameter of 11.5 mm to 15.0 mm can also be cut using the optional correction arbor. ... Read MoreMass (g) 332from S$269.90Min. 4 days
- ESCO Spare blade (EA339A-3, AB-3 / for steel pipe / stainless steel pipe / 1 piece)from S$36.99Min. 3 days
- KNIPEX Corrugated pipe cutter stripper keyEasy to handle. Just squeeze the TwistCut and turn it with a little force. It also supports protective pipes for aluminum composite pipes (maximum diameter 32 mm) in sanitary equipment. It always cuts at the top of the wave, so the cut edges are more accurate and do not damage the internal cables... Read MoreMass (g) 46 Cutting Capacity (Φmm) 13～32from S$99.90Min. 4 days
-
- RIDGID (Emerson Japan) Powerful pipe cutter 2-A (3-flute)Manual, quick and clean finish without burrs. A long shank protects the adjusting screw. The 3-flute enables quick and clean pipe cutting. Ideal for use in places that cannot be rotated 360 degrees, such as existing pipes. The roller part of 32820 becomes the blade. Steel pipe, ductile cast ironReplacement Blades 33100 Model 2-Afrom S$559.90Min. 4 days
![[3-32mm] Hose pinch-off tool](https://jp.images-monotaro.com/Monotaro3/pi/middle/mono03469435-180824-02.jpg)
![[3-63mm] Hose pinch-off tool](https://jp.images-monotaro.com/Monotaro3/pi/middle/mono03469444-180824-02.jpg)
