All Category

Corner Pipe Wrenches

View : Grid List
Filter

28 Item(s)

Set Ascending Direction
  1. Aluminum corner wrench
    LOBSTER (LOBTEX) Aluminum corner wrench
    Ideal for use in narrow spaces such as ground pipes, adjacent pipes, and in-groove pipes that cannot be worked with a pipe wrench. Made of aluminum and light, you can work easily. The opening angle of the frame is large, so you can easily hold the pipe. Screwing / removing the pipe. Plumbing work... Read More
    Rating:
    93%
    from S$87.99
    Min. 2 days
  2. Corner wrench U
    MCC Corner wrench U
    In addition to the function of a pipe wrench, it is ideal for piping work in narrow spaces such as corners and grooves. The strength is equivalent to the pipe wrench JIS strong class.
    Rating:
    90%
    from S$58.99
    Min. 2 days
  3. Corner Wrench Aluminum AD
    MCC Corner Wrench Aluminum AD
    The main body is cast aluminum and the frame is steel plate. It is 30% lighter than the conventional product.
    Rating:
    100%
    from S$77.99
    Min. 2 days
  4. Corner wrench slim wide
    MCC Corner wrench slim wide
    Thinner and lighter than conventional corner wrenches. The strength and tightening force are the same. The weight is about 30% lighter than the company's corner wrench. The strength is equivalent to the pipe wrench JIS normal class.
    Tooth Width (mm)  13 
    Rating:
    100%
    from S$69.99
    Min. 2 days
  5. Corner wrench aluminum slim wide
    MCC Corner wrench aluminum slim wide
    This is a new type of 21st century tool that incorporates your needs into many work sites. The frame is rust-resistant chrome-plated. We are good at narrow spaces than pipe wrenches The corner wrench is designed to be slimmer. Not only for narrow spaces such as in grooves, near walls, and ceilin... Read More
    from S$129.90
    Min. 2 days
  6. Corner wrench Aluminum white / Enbi coated steel pipe DA
    MCC Corner wrench Aluminum white / Enbi coated steel pipe DA
    Dual model for both galvanized steel pipe (white pipe) and envelope coated pipe. Wide range of applications regardless of piping material. The tooth width is the same as the conventional corner wrench, and it is easy to tighten the envi-based single-layer outer-coated steel pipe and joint. Ideal ... Read More
    Rating:
    90%
    from S$77.99
    Min. 2 days
  7. Corner pylen "Paiton" (aluminum)
    SUPER TOOL Corner pylen "Paiton" (aluminum)
    The body is made of light and durable aluminum forging. It fits both white and cladding tubes due to the middle teeth, and is suitable for a wide range of applications. corner
    Rating:
    100%
    from S$98.99
    Min. 2 days
  8. Corner wrench Aluminum
    MCC Corner wrench Aluminum
    Material (Main Unit)  Aluminum alloy 
    Rating:
    50%
    from S$199.90
    Min. 2 days
  9. Compact corner wrench
    MCC Compact corner wrench
    Tooth Width (mm)  11  Dimension (mm)  200  Mass (g)  240  Trusco Part No.  327-4616  Nominal dimensions added  6~15A  Jaw Opening Width (mm)  8~23 
    Rating:
    100%
    from S$58.99
    Min. 2 days
  10. Aluminum corner wrench
    HIT Aluminum corner wrench
    The main body is light and strong by forging a special aluminum alloy. Ideal for grounding piping work, wall piping work, and piping work in grooves. It can be easily used even in places where it is difficult to use with a conventional wrench.
    Rating:
    80%
    from S$109.90
    Min. 2 days
  11. Corner wrench aluminum coating
    MCC Corner wrench aluminum coating
    The fine tooth shape minimizes scratches on the cladding tube. No need for troublesome post-processing. This model is for polyethylene-coated steel pipes and ENBI-coated steel pipes. The difference in the direction of the handle is effective not only for normal work but also for narrow work such ... Read More
    Rating:
    90%
    from S$139.90
    Min. 2 days
  12. Poly pie wrench
    MCC Poly pie wrench
    Wide mouth opening, ratchet mechanism for continuous tightening without replacement. Ideal for tightening poly pie metal joints (nominal diameter 13 to 50).
    Trusco Part No.  440-2138  Jaw Opening Width (mm)  30~90  Nominal Size (mm)  450  Mass (g)  1300 
    from S$229.90
    Min. 2 days
  13. Poly pie wrench
    MCC Poly pie wrench
    Wide mouth opening, ratchet mechanism for continuous tightening without replacement. Ideal for tightening poly pie metal fittings.
    Rating:
    100%
    from S$109.90
    Min. 2 days
  14. Aluminum corner pipe wrench
    SUPER TOOL Aluminum corner pipe wrench
    For light and durable aluminum forged white tubes. Ideal for plumbing work overhead, near walls, and in grooves. For tightening and dismantling gas and water pipes (white pipes).
    2018 Trusco page  4 1409  Trusco Part No.  835-9788  Nominal dimensions added  40~80A  Overall Length (mm)  600  Pipe Diameter to Grip (Φmm)  48~90 
    from S$159.90
    Min. 4 days
  15. Aluminum corner pipe wrench (for both white and coated pipes) Paiton
    SUPER TOOL Aluminum corner pipe wrench (for both white and coated pipes) Paiton
    Since it is a medium-sized tooth, it fits both the white tube and the cladding tube. For tightening and dismantling gas, water pipes (white pipes), and coated steel pipes in narrow spaces.
    2018 Trusco page  4 1409  Pipe Diameter to Grip (Φmm)  48~90  Nominal dimensions added  40~80A  Trusco Part No.  835-9789  Overall Length (mm)  600 
    from S$159.90
    Min. 2 days
  16. Angle corner wrench
    MCC Angle corner wrench
    The free head (the bending angle of the head is 30 degrees) works well with a gap. In addition to being slim and wide, the head can move freely, improving work efficiency in tight spaces.
    Nominal dimensions added  10A~32A  Tooth Width (mm)  13  Jaw Opening (mm)  16~48  Dimension (mm)  300 
    from S$129.90
    Min. 3 days
  17. Lining SGM wrench
    MCC Lining SGM wrench
    Dedicated for tightening mechanical joints (recommended by Osaka Gas). The tooth width is narrow, making it ideal for tightening lining SGM fittings. * 40A does not come with a sheath tube. * The total length is the total length when the sheath tube is attached (40A is the main body only).
    from S$189.90
    Min. 5 days
  18. Aluminum corner wrench
    TASCO Aluminum corner wrench
    from S$109.90
    Min. 6 days
  19. For corner wrench coated steel pipes
    MCC For corner wrench coated steel pipes
    Fine teeth that fit the polyethylene enbi coating minimize scratches on the coating, eliminating the need for troublesome post-treatment. Dedicated for tightening polyethylene enbi cladding tubes
    Sliding allowable torque of coating (N ・ m [kgf ・ m])  78[8]  Nominal dimensions added  8~25A  Jaw Opening Width (mm)  13~38  Nominal Size (mm)  250  Applicable pipe nominal dimensions  15A  Mass (g)  600 
    from S$129.90
    Min. 5 days
  20. Corner wrench aluminum type 450mm
    ARM SANGYO Corner wrench aluminum type 450mm
    Trusco Part No.  852-0739 
    Discontinued
  21. Corner wrench Aluminum AD coated steel pipe only
    MCC Corner wrench Aluminum AD coated steel pipe only
    Fine teeth that fit the polyethylene enbi coating minimize scratches on the coating, eliminating the need for troublesome post-treatment.
    Discontinued
  22. Corner wrench iron type 350mm
    ARM SANGYO Corner wrench iron type 350mm
    Trusco Part No.  852-0742  Recycled paper use mark  Conformity 
    Discontinued
  23. Corner wrench aluminum type 350mm
    ARM SANGYO Corner wrench aluminum type 350mm
    Trusco Part No.  852-0738 
    Discontinued
  24. For corner wrench coated steel pipes
    MCC For corner wrench coated steel pipes
    Fine teeth that fit the polyethylene enbi coating minimize scratches on the coating, eliminating the need for troublesome post-treatment.
    Discontinued
  25. Angle corner wrench 300
    MCC Angle corner wrench 300
    Free head (head bending angle is 30 degrees) In addition to being slim and wide, the head can move freely, improving work efficiency in tight spaces.
    Nominal dimensions added  10~32A  Tooth Width (mm)  13  Jaw Opening Width (mm)  16~48  Dimension (mm)  300  Mass (g)  700 
    Discontinued
  26. Corner wrench iron type 300mm
    ARM SANGYO Corner wrench iron type 300mm
    Trusco Part No.  852-0741 
    Discontinued
  27. Corner wrench iron type 250mm
    ARM SANGYO Corner wrench iron type 250mm
    Trusco Part No.  852-0740  Recycled paper use mark  Conformity 
    Discontinued
  28. For corner wrench coated steel pipes
    MCC For corner wrench coated steel pipes
    Fine teeth that fit the polyethylene enbi coating minimize scratches on the coating, eliminating the need for troublesome post-treatment. Dedicated for tightening polyethylene enbi cladding tubes
    Nominal dimensions added  15~40A  Applicable pipe nominal dimensions  25A  Jaw Opening Width (mm)  21~53  Mass (g)  1200  Nominal Size (mm)  350  Sliding allowable torque of coating (N ・ m [kgf ・ m])  196[20] 
    Rating:
    100%
    Discontinued
View : Grid List
Filter

28 Item(s)

Set Ascending Direction