All Category

Sheet Metal Punching

A puncher is a tool for making holes in order to pass steel pipes through distribution boards and control boards in electrical work. A punch and a die can be combined, and the hole can be made by pressing the punch down from above with the die under the steel plate. Punch dies are available in different sizes depending on the size of the hole, round holes, and square holes. The hydraulic puncher is a puncher to increase work efficiency. Used in combination with punch dies and puncher shafts. A hand punch set that allows manual punching is a puncher that includes punch dies of various sizes.
View : Grid List
Filter

Items 1 - 40 of 112

Set Ascending Direction
  1. HP-1 Replacement Blade with Round Hole
    Kamekura Seiki HP-1 Replacement Blade with Round Hole
    Shape  Round hole (circular) 
    Rating:
    100%
    from S$29.99
    Min. 2 days
  2. HP-1 Punch Set Compatible Shaft
    Kamekura Seiki HP-1 Punch Set Compatible Shaft
    Rating:
    86%
    from S$16.99
    Min. 2 days
  3. Sheet metal bending machine
    HOZAN (HOZAN TOOL INDUSTRIAL) Sheet metal bending machine
    Depending on the combination of groove spacing, most four sides can be bent in 5 mm or 10 mm increments from 10 to 420 mm. (However, in the case of box shape, 140, 160, 240-260, 310, 330, 360, 370 mm cannot be processed) For bending aluminum and iron plates
    Rating:
    80%
    from S$299.90
    Min. 2 days
  4. Hand Punch Set
    TOP KOGYO Hand Punch Set
    Used for punching all holes in sheet metal and leather. No burr can be returned and holes can be punched cleanly. * Stainless steel plate can be drilled up to 1.0 mm thick
    Mass (kg)  2.05  Drilling Capacity, Steel (Φmm)  1.6  Trusco Part No.  248-7632 
    Rating:
    100%
    from S$339.90
    Min. 2 days
  5. Manual Hydraulic Puncher
    Izumi Products Company Manual Hydraulic Puncher
    The finish is beautiful. There is no chip scattering. It is a head separation type.
    Mass (kg)  1.9 
    Rating:
    90%
    from S$1,199.00
    Min. 2 days
  6. shaft
    Kamekura Seiki shaft
    * A washer (W10) is required to use it.
    Trusco Part No.  827-9759  Mass (g)  130  Suitable Model  HP-3 
    from S$33.99
    Min. 2 days
  7. Square hole punch set for HP-1 (Punch / Die / Shaft / Nut)
    Kamekura Seiki Square hole punch set for HP-1 (Punch / Die / Shaft / Nut)
    Suitable for  Shaft: KA-11 × 12  Shape  Square hole (square)  Drilling capacity (mm) Steel plate thickness  t2.3 
    Rating:
    90%
    from S$299.90
    Min. 2 days
  8. HP-3 Adapter
    Kamekura Seiki HP-3 Adapter
    Mass (g)  150  Trusco Part No.  852-2103 
    Rating:
    100%
    from S$38.99
    Min. 2 days
  9. Shaft for puncher
    LOBSTER (LOBTEX) Shaft for puncher
    With a hole punch that uses flood control, you can efficiently punch holes for equipment, plumbing, sheet metal work, and mounting of various parts to switchboards and control panels at construction sites such as electricity, water, and gas.
    Suitable Model  LP104AP、LP104BP 
    Rating:
    100%
    from S$35.99
    Min. 2 days
  10. Port puncher spare blade
    Kamekura Seiki Port puncher spare blade
    Suitable for  RF-A2、RF-3、NB-3 
    from S$149.90
    Min. 2 days
  11. punch
    Izumi Products Company punch
    Suitable Model  SH10・SH5PDG 
    Rating:
    100%
    from S$669.90
    Min. 2 days
  12. Punch dies for thin steel pipes
    LOBSTER (LOBTEX) Punch dies for thin steel pipes
    from S$46.99
    Min. 3 days
  13. Punch dies for thick steel pipes
    LOBSTER (LOBTEX) Punch dies for thick steel pipes
    Rating:
    55%
    from S$46.99
    Min. 2 days
  14. Spare blade for angle puncher
    Izumi Products Company Spare blade for angle puncher
    Male blade, female blade set
    Suitable Model  SH70  Mass (kg)  0.25 
    from S$119.90
    Min. 2 days
  15. Powerman junior
    Kamekura Seiki Powerman junior
    It is compact and lightweight, and the pump and cylinder are integrated, making it easy to handle. It is used to process various holes such as mounting holes for switches and connectors that are attached to panels such as control panels, operation panels, and racks, and holes for passing electric... Read More
    Mass (kg)  2.2  Specification  Compact, lightweight and integrated type  Length (mm)  310  Main Unit Output (kN [kgf])  44.1[4500] 
    Rating:
    100%
    from S$879.90
    Min. 2 days
  16. IS-14MPS spare blade
    IKURA SEIKI IS-14MPS spare blade
    from S$109.90
    Min. 20 days
  17. Punch dice (corner)
    LOBSTER (LOBTEX) Punch dice (corner)
    from S$499.90
    Min. 3 days
  18. IS-20MPS spare blade
    IKURA SEIKI IS-20MPS spare blade
    from S$109.90
    Min. 15 days
  19. IS-106MPS spare blade
    IKURA SEIKI IS-106MPS spare blade
    from S$169.90
    Min. 5 days
  20. Spacer for puncher
    LOBSTER (LOBTEX) Spacer for puncher
    With a hole punch that uses flood control, you can efficiently punch holes for equipment, plumbing, sheet metal work, and mounting of various parts to switchboards and control panels at construction sites such as electricity, water, and gas.
    Suitable Model  LP104AP、LP104BP 
    from S$18.99
    Min. 32 days
  21. Integrated hydraulic puncher
    Izumi Products Company Integrated hydraulic puncher
    It is an integrated type with excellent operability, and you can swing your head freely. It is possible to work alone when drilling holes in high places. Machining holes for wiring and piping. * Stainless steel or higher capacity is required for those soaked in soft iron plate. * B92 and B104 can... Read More
    Maximum drilling capacity (mm)  (mild steel version) 3.2  Mass (kg)  2.4  Trusco Part No.  455-8863  Drilling Capacity  5/8 inch  Replacement Blades  A19、A25、A31、A39、A51  Type  For thin steel 
    from S$1,399.00
    Min. 5 days
  22. IS-18P spare blade
    IKURA SEIKI IS-18P spare blade
    from S$189.90
    Min. 30 days
  23. Integrated hydraulic puncher
    Izumi Products Company Integrated hydraulic puncher
    It is an integrated type with excellent operability, and you can swing your head freely. It is possible to work alone when drilling holes in high places. Machining holes for wiring and piping. * Stainless steel or higher capacity is required for those soaked in soft iron plate. * B92 and B104 can... Read More
    Mass (kg)  2.4  Drilling Capacity  4 inch  Trusco Part No.  455-8871  Replacement Blades  B16、B22、B28、B36、B42、B54  Type  For heavy steel 
    from S$1,599.00
    Min. 3 days
  24. Spare blade for M bar puncher
    Marvel Spare blade for M bar puncher
    from S$109.90
    Min. 4 days
  25. Battery 3.0 Ah
    OGURA Battery 3.0 Ah
    Battery Capacity (Ah)  Trusco Part No.  820-6419  Voltage (V)  18  Type  Battery pack 
    from S$299.90
    Min. 4 days
  26. Light punch
    CACTUS Light punch
    Excellent workability due to its ultra-lightweight and compact design! It can be used for a wide range of applications such as electrical equipment work, piping work, and various parts installation work for drilling holes in switchboards, control boards, and other steel plates. The durable punch ... Read More
    Overall Length (mm)  410  Output (kN)  59  Stroke (mm)  20  Mass of Main Unit (kg)  2.3 
    from S$1,399.00
    Min. 6 days
  27. Hydraulic cylinder
    LOBSTER (LOBTEX) Hydraulic cylinder
    With a hole punch that uses flood control, you can efficiently punch holes for equipment, plumbing, sheet metal work, and mounting of various parts to switchboards and control panels at construction sites such as electricity, water, and gas.
    Trusco Part No.  372-6177  Mass (kg)  1.74  Suitable Model  LP104AP、LP104BP 
    from S$599.90
    Min. 3 days
  28. A-19 punch set
    ESCO A-19 punch set
    Esco Part No.  EA620TA-19 
    from S$48.99
    Min. 4 days
  29. B-104 Punch set
    ESCO B-104 Punch set
    Esco Part No.  EA620TB-104 
    from S$439.90
    Min. 4 days
  30. A-25 punch set
    ESCO A-25 punch set
    Esco Part No.  EA620TA-25 
    from S$53.99
    Min. 4 days
  31. IS-BP18S spare blade
    IKURA SEIKI IS-BP18S spare blade
    from S$199.90
    Min. 5 days
  32. 25.4mm punch unit
    ESCO 25.4mm punch unit
    Esco Part No.  EA620G-25.4 
    from S$239.90
    Min. 4 days
  33. B-22 Punch set
    ESCO B-22 Punch set
    Esco Part No.  EA620TB-22 
    from S$59.99
    Min. 4 days
  34. 61.5mm punch unit
    ESCO 61.5mm punch unit
    Esco Part No.  EA620G-61.5 
    from S$449.90
    Min. 4 days
  35. [For EA620YA] spare blade
    ESCO [For EA620YA] spare blade
    Esco Part No.  EA620YA-1 
    from S$89.99
    Min. 4 days
  36. 34.6mm punch unit
    ESCO 34.6mm punch unit
    Esco Part No.  EA620G-34.6 
    from S$269.90
    Min. 4 days
  37. B-70 punch set
    ESCO B-70 punch set
    Esco Part No.  EA620TB-70 
    from S$219.90
    Min. 4 days
  38. 47.0mm punch unit
    ESCO 47.0mm punch unit
    Esco Part No.  EA620G-47 
    from S$439.90
    Min. 4 days
  39. Punch set replacement blade
    Marvel Punch set replacement blade
    from S$129.90
    Min. 4 days
  40. 25.4x25.4mm  Square punch unit
    ESCO 25.4x25.4mm Square punch unit
    Can be drilled with a spanner
    Drilling Capacity, Mild Steel Plate (mm)  2.0  Drilling Thickness (mm)  25.4 x 25.4 (corner) 
    from S$1,399.00
    Min. 6 days
View : Grid List
Filter

Items 1 - 40 of 112

Set Ascending Direction