All Category

Lever Type

View : Grid List
Filter

Items 1 - 40 of 177

Set Ascending Direction
  1. Tube bender 3 size
    MonotaRO Tube bender 3 size
    3 sizes of copper pipes and aluminum pipes can be bent in the range of 0 to 90 degrees. Accurately bend soft copper pipes, soft viscous aluminum pipes, etc. * Do not use for any other purpose.
    Overall Length (mm)  190  Material  Aluminum  Tube thickness (mm)  Copper tube / 0.7-1.25 
    Rating:
    91%
    from S$27.99
    Min. 2 days
  2. Lever type tube bender
    TASCO Lever type tube bender
    The handle can be bent from the 110 ° position, so it is easy to apply force. Can be bent up to 180 °. Wall piping can be done easily. Work in the corner is easy.
    Bending Angle  Up to 180 ° 
    Rating:
    84%
    from S$44.99
    Min. 2 days
  3. Bender for small pipe
    Strong Tool Bender for small pipe
    You can easily bend difficult small diameter pipes. For bending fine pipes used in automobiles and machines
    Bending Angle  45~90°  Trusco Part No.  859-2940  Material (Main Unit)  Aluminum 
    Rating:
    88%
    from S$35.99
    Min. 2 days
  4. Tube Bender
    SUPER TOOL Tube Bender
    Optimal for bending copper pipes. Annealed stainless steel pipes and OST copper pipes are also available. With a soft rubber grip on the hand. The handle is made of special alloy steel and is tough.
    Bending Angle  0~180(°) 
    Rating:
    100%
    from S$189.90
    Min. 2 days
  5. 3 size vendor
    ESCO 3 size vendor
    This is useful when bending a pipe that comes out of a wall.
    Pipe Outer Diameter (Φmm)  1/4”(6.35mm)・5/16”(7.94mm)・3/8”(9.53mm)  Overall Length (mm)  190  Bending Angle  90 ° (maximum)  Material  Aluminum  Esco Part No.  EA215W 
    Rating:
    84%
    from S$35.99
    Min. 2 days
  6. Tube bender mm type
    MonotaRO Tube bender mm type
    Bending up to 180 ° can be done easily with a minimum of force. For bending annealed copper, brass, aluminum, and other thin metal pipes. * Do not use for anything other than its intended purpose
    Bending Angle  0-180 degrees 
    Rating:
    65%
    from S$38.99
    Min. 2 days
  7. 2-stage quick action color bender
    TASCO 2-stage quick action color bender
    The two-stage action handle makes 180 ° bending easier than conventional products. Each size is color-coded, so you can tell at a glance which size vendor you are. Annealed copper tube
    Rating:
    96%
    from S$67.99
    Min. 2 days
  8. Strong Tube Bender (for Stainless Steel / Copper Pipe)
    BBK Technologies Strong Tube Bender (for Stainless Steel / Copper Pipe)
    When bending a steel pipe such as a stainless steel pipe, the wall thickness of the target tube should be about 1.2 mm as a guide.
    Rating:
    40%
    from S$159.90
    Min. 2 days
  9. Tube Bender (for Stainless Steel)
    TRUSCO Tube Bender (for Stainless Steel)
    Soft copper pipes, iron pipes, and thin stainless steel pipes can be smoothly bent up to 180 °.
    Rating:
    20%
    from S$149.90
    Min. 2 days
  10. Tube Bender (for Annealed Stainless Steel, Copper, Aluminum)
    TRUSCO Tube Bender (for Annealed Stainless Steel, Copper, Aluminum)
    Bend soft copper pipes and soft viscous aluminum pipes accurately. The handle is a forged carbon steel and is tough. Bending of soft copper pipe, brass, soft viscous aluminum pipe, and annealed stainless steel pipe
    Bending Angle  0~180° 
    from S$99.90
    Min. 2 days
  11. Lever Type Tube Bender (for Thin Wall Stainless Steel, Copper, Aluminum)
    Imperial Lever Type Tube Bender (for Thin Wall Stainless Steel, Copper, Aluminum)
    The deep groove bending wheel enables finishing with a small bending radius with little change in tube wall thickness. Since the bending start angle starts at 90 °, the bending angle is accurate with a light force. For soft copper pipes, aluminum, soft steel (OST), thin-walled pipes
    Type  For inch 
    Rating:
    90%
    from S$199.90
    Min. 2 days
  12. 8mm lever type bender
    ESCO 8mm lever type bender
    Esco Part No.  EA215M-8 
    from S$55.99
    Min. 2 days
  13. Lever type tube bender MINI-Mini set (for annealed copper pipes only)
    FUSO Lever type tube bender MINI-Mini set (for annealed copper pipes only)
    It can be bent neatly even in narrow places. A great value set that can be used in 4 sizes: 1/4, 3/8, 1/2, and 5/8. Since it is MINI-Mini size, the head can be replaced quickly and it is not tiring.
    Rating:
    20%
    from S$87.99
    Min. 2 days
  14. Lever type tube bender (mm)
    Imperial Lever type tube bender (mm)
    It is a tube bender made by Imperial and has a good reputation for high accuracy and usability. Since the lever handle starts to bend when it is opened 90 °, no force is required and 180 ° bending can be done easily. Suitable for bending work on walls. For soft copper pipes, aluminum, soft steel ... Read More
    Rating:
    95%
    from S$229.90
    Min. 2 days
  15. 3 in1 Tube Bender (Only for Annealed Copper Tube)
    Imperial 3 in1 Tube Bender (Only for Annealed Copper Tube)
    Ideal for plumbing room air conditioners. One unit can bend 3 sizes of 1/4 ", 3/8" and 1/2 "outer diameter. Made of die-cast aluminum, it is lightweight. For annealed copper pipe only.
    Dimension (mm)  (Right) 335, (Left) 400  Bending Angle  0~180°  Mass (kg)  1.1  Applicable Pipe Diameter  1/4・3/8・1/2  Bending Radius (mm)  14.29・23.81・38.1  Trusco Part No.  248-8175  Type  For inch 
    Rating:
    100%
    from S$189.90
    Min. 2 days
  16. 6mm lever type bender
    ESCO 6mm lever type bender
    For hot water supply piping For annealed copper pipe
    Esco Part No.  EA215M-6  Overall Length (mm)  220  Suitable Size (Φmm) 
    from S$53.99
    Min. 2 days
  17. 4 head tube bender
    SUPER TOOL 4 head tube bender
    Bending of 4 sizes with 1 reinforced plastic containing glass fiber. Bending angle 0-180 ° Bending work for soft copper pipes, soft viscous aluminum pipes, etc.
    Trusco Part No.  178-0913  Mass (g)  340  Overall Length (mm)  265  Bending Radius (mm)  16.0(5・6)、23.5(8・10)  Suitable Pipe Diameter (Φmm)  5・6・8・10 
    Rating:
    70%
    from S$99.90
    Min. 2 days
  18. 10mm lever type bender
    ESCO 10mm lever type bender
    Esco Part No.  EA215M-10 
    from S$78.99
    Min. 2 days
  19. 2-stage quick action bender
    TASCO 2-stage quick action bender
    Uses a two-stage action handle that can be easily bent 180 °. Since the guide has a roller, it can be bent neatly with little friction and light force.
    Rating:
    100%
    from S$99.90
    Min. 6 days
  20. Wall Bender
    TASCO Wall Bender
    Bending flatness (manufacturer measurement): 91% or more. You can prevent the piping from buckling due to manual bending of the air-conditioning copper piping. Anyone can easily bend the R and make it look good.
    Applicable copper pipe diameter  1/4″(6.35mm)×3/8″(9.52mm) 
    from S$87.99
    Min. 2 days
  21. Cut bender
    MCC Cut bender
    It is effective for cutting and bending steel bars for reinforced concrete, deformed steel bars, and rails. Designed with an emphasis on stability, sharpness, ease of use and durability.
    Rating:
    100%
    from S$539.90
    Min. 6 days
  22. 12mm lever type bender
    ESCO 12mm lever type bender
    Esco Part No.  EA215M-12 
    Rating:
    100%
    from S$99.99
    Min. 2 days
  23. Pipe bender
    HASCO Pipe bender
    A special tool that allows you to easily bend brake parts without bumps. Bend while holding it in both hands.
    from S$279.90
    Min. 2 days
  24. Tube bender for stainless steel and copper pipe
    Imperial Tube bender for stainless steel and copper pipe
    Bending of stainless steel pipes (thickness 1 mm or less) is also possible. Bending is possible at the best position at that time with the variable handle. By equipping the shoe (holding) part with a roller, friction is reduced and easy bending is possible. The hook is movable and the piping can ... Read More
    bending angle (°)  0~180  Tube Wall Thickness can Bend (mm)  1 or less  Type  For millimeter 
    Rating:
    100%
    from S$299.90
    Min. 3 days
  25. 3 head tube bender
    SUPER TOOL 3 head tube bender
    Bending of 5 sizes with 1 (3 inches, 2 millimeters) Soft copper, brass, aluminum
    Mass (g)  380  Overall Length (mm)  224  Applicable Pipe Outer Diameter (inch)  1/4、5/16、3/8  Bending angle (°)  0~90  Trusco Part No.  178-0921  Material  Aluminum alloy die cast  Suitable Tube Outer Diameter (Φmm)  6、8  Bending Radius (mm)  23.8 
    from S$119.90
    Min. 2 days
  26. 3 type bender copper for aluminum
    TRUSCO 3 type bender copper for aluminum
    Accurately bend soft copper pipes, soft viscous aluminum pipes, etc. Bending of 3 sizes of 6, 8 and 10 mm is possible. Bending of annealed copper pipes and soft viscous aluminum pipes
    Tube Wall Thickness can Bend (mm), Annealed Copper Tube  1.2 (at 6.8 mm), 1.4 (at 10 mm)  Specification  Applicable tube size (mm): 6, 8, 10  Trusco Part No.  125-5894  Bending Angle  0~90  Material / Finish  Aluminum alloy die cast  Bending Radius R  24(mm)  Mass (kg)  0.41 
    from S$86.99
    Min. 2 days
  27. Tube bender for copper pipe
    Virax Tube bender for copper pipe
    A high quality tube bender made in France. Ideal for bending copper pipes. Made of steel. Bending of copper pipes.
    2018 Trusco page  4 1377  Material  Steel 
    from S$129.90
    Min. 2 days
  28. Tube bender (for stainless steel, copper, aluminum) 406
    RIDGID (Emerson Japan) Tube bender (for stainless steel, copper, aluminum) 406
    Maximize the power of lever adoption to eliminate extra power. The lever is designed so that it will not hit your hand even when bent 180 °. For thin-walled stainless steel tubes, soft / hard copper tubes, brass, and aluminum.
    Type  For inch  Bending Angle  0~180°  Trusco Part No.  450-9226  Bending Radius (mm)  23  Applicable Pipe Diameter  3/8  Mass (kg)  1.4 
    from S$219.90
    Min. 32 days
  29. 1/4 ″ lever type bender
    ESCO 1/4 ″ lever type bender
    Esco Part No.  EA215A-2 
    from S$48.99
    Min. 4 days
  30. Imp 3 head tube bender
    BBK Technologies Imp 3 head tube bender
    One bender can perform bending of three sizes. Very compact and lightweight. Only for annealed copper tubes. Bending up to 90 degrees can be done smoothly. For annealed copper pipe
    Rating:
    100%
    from S$87.99
    Min. 2 days
  31. Tube bender (for stainless steel, copper, aluminum) 408
    RIDGID (Emerson Japan) Tube bender (for stainless steel, copper, aluminum) 408
    Maximize the power of lever adoption to eliminate extra power. The lever is designed so that it will not hit your hand even when bent 180 °. For thin-walled stainless steel tubes, soft / hard copper tubes, brass, and aluminum.
    Trusco Part No.  450-9285  Applicable Pipe Diameter  1/2  Bending Angle  0~180°  Type  For inch  Mass (kg)  2.7  Bending Radius (mm)  38 
    from S$329.90
    Min. 3 days
  32. Quick action tube vendor
    ASADA Quick action tube vendor
    Bend 180 ° easily with quick action. For bending soft steel pipes.
    Bending Angle  ~180° 
    Rating:
    100%
    from S$76.99
    Min. 5 days
  33. Lever Type Tube Bender
    FUSO Lever Type Tube Bender
    It is a classic vendor of the past that has not changed even now. Low price, high quality definitive edition! Easy bending up to 180 ° For annealed copper tube only
    from S$169.90
    Min. 5 days
  34. Tube bender (for stainless steel, copper, aluminum) 404
    RIDGID (Emerson Japan) Tube bender (for stainless steel, copper, aluminum) 404
    Maximize the power of lever adoption to eliminate extra power. The lever is designed so that it will not hit your hand even when bent 180 °. For thin-walled stainless steel tubes, soft / hard copper tubes, brass, and aluminum.
    Trusco Part No.  450-9269  Type  For inch  Applicable Pipe Diameter  1/4  Mass (kg)  0.7  Bending Radius (mm)  16  Bending Angle  0~180° 
    from S$249.90
    Min. 2 days
  35. 1/2 ″ Lever Type Bender
    ESCO 1/2 ″ Lever Type Bender
    Rating:
    100%
    from S$96.99
    Min. 4 days
  36. For tube bender quick lever type 10mm
    TRUSCO For tube bender quick lever type 10mm
    When bending 180 °, the arms do not cross and it is easy to apply force. The right hand lever is a two-stage switchable type. Bending of soft copper pipes, soft viscous aluminum pipes, and thin stainless steel pipes (iron cannot be used).
    Mass (kg)  1.05  Applicable Pipe Diameter  10  Bending Radius (mm)  23  Trusco Part No.  389-4720  Suitable Pipe Nominal Diameter  75~150mm  Type  For millimeter  Dimension (mm)  Left hand / 270, Right hand / 300 
    from S$179.90
    Min. 32 days
  37. 90 ° lever type tube bender
    BBK Technologies 90 ° lever type tube bender
    ● Equipped with rollers on the shoe (holding) part (friction reduction) ● The bending angle is up to 90 °.
    from S$139.90
    Min. 2 days
  38. Lever type tube bender (mm)
    Imperial Lever type tube bender (mm)
    The deep groove bending wheel enables finishing with a small bending radius with little change in tube wall thickness. A roller is mounted on the shoe part, and the bending angle can be accurately processed without requiring more force than necessary. Compact, lightweight and robust. Copper, bras... Read More
    Dimension (mm)  (Left hand) 720
    (Right) 510 
    Height (mm)  165  Mass (g)  2250  Bending Radius (mm)  57.1  Overall Length (mm)  710  Type  For millimeter 
    from S$389.90
    Min. 3 days
  39. Tube bender (for stainless steel, copper, aluminum) 405 / 408M
    RIDGID (Emerson Japan) Tube bender (for stainless steel, copper, aluminum) 405 / 408M
    Bends soft / hard copper tubes, brass, aluminum, etc. accurately to a specified angle. The dimensional error that occurs during bending is calculated in advance using the gain mark, allowing accurate cutting and eliminating waste in the tube. The lever is designed so that your hands will not hit ... Read More
    Mass (kg)  1.20  Cutting Capacity (mm)  8mm (outer diameter)  Bending Radius (mm)  24  Overall Length (mm)  350  Trusco Part No.  450-9218  Width (mm)  70  Height (mm)  90 
    from S$229.90
    Min. 3 days
  40. Quick lever type tube bender (for copper and stainless steel)
    TRUSCO Quick lever type tube bender (for copper and stainless steel)
    When bending 180 °, the arms do not cross and it is easy to apply force. The right hand lever is a two-stage switchable type. Bending of soft copper pipes, soft viscous aluminum pipes, and thin stainless steel pipes (iron cannot be used).
    Bending Angle  0~180°  Type  For millimeter 
    Rating:
    80%
    from S$239.90
    Min. 32 days
View : Grid List
Filter

Items 1 - 40 of 177

Set Ascending Direction