Insulated Nippers

1000V insulation specification. It is an IEC60900 standard product. The handle part is a safety sign specification that allows you to visually check the safety. By using high quality raw materials, precise work is possible and the tool life is extended. * 1000V insulation specification is for the... Read More

A versatile diagonal nipper that can be used in a variety of situations. By using high quality raw materials, precise work is possible and the tool life is extended. Can precisely cut soft and hard wires. At the tip of the blade, you can carefully cut a thin copper wire. The hardness of the blade... Read More

The grip is manufactured according to the EN60900 standard.

Very sturdy due to forging. Conforms to DIN EN / IEC 60900 standard. The 1000V insulated handle, which is made of two types of materials, uses a two-tone color of red and yellow to differentiate it from non-insulated tools. A versatile diagonal nipper that can be used in a variety of situations. ... Read More

Achieves weight reduction and high stability by adopting a 3-piece hinge. Achieves 180mm class cutting capacity with a size of 160mm (compared to our company). The large opening makes it easy to cut fine cables. Compatible with all workpieces such as spring steel, electric wires, and cables

This product complies with the IEC 60900: 2004 standard, which is the only international standard for insulation tools. Supports voltages up to AC1000V and DC1500V.

The joint adopts forged shaft caulking and has excellent durability. Suitable for cutting various wires including piano wire. Optimal blade position and angle ・ Design that maximizes the principle of leverage ・ Ergonomic handle shape-These three advantages provide high cutting ability with less... Read More

1000V insulation specification. It is a European standard EN60900 compliant product. Used for electrical work, etc.

1000V insulation specification. It is an IEC60900 standard product. The cutting edge is carefully hardened to achieve sharp sharpness. The handle part is a safety sign specification that allows you to visually check the safety. * 1000V insulation specification is for the handle only.

1000V insulation tool. The ergonomic two-component grips are red and yellow to indicate the insulating tool. For electrical equipment work, for repairing electric vehicles such as hybrid vehicles

It is an IEC60900 standard product. The insulating film of the molded resin has achieved an unprecedented thinness of the film. It is also ideal for work in places where there is no space. Hexagonal specifications. The expiration date is 3 years (extended by 1 year for paid inspection). For elect... Read More

It can be easily adjusted with knurled screws and lock nuts according to the diameter of single wire or stranded wire. Special tool steel, forged products, oil quenching. Comes with an integrated insulating retaining ring to attach anti-slip. With an open spring, you don't have to open your m... Read More

1,000V insulated handle with thick dip coating. A versatile diagonal nipper that can be used in a variety of situations. By using high quality raw materials, precise work is possible and the tool life is extended. Can precisely cut soft and hard wires. At the tip of the blade, you can carefully c... Read More

Reduces the force applied by 40% compared to general diagonal nippers 25% lighter, compact, powerful and precise. Precise ultra-fine wires can be cut in the same way as multi-core cables and hard spring steel. The box joint structure makes it lightweight but extremely stable. By optimally adjusti... Read More

Industrial: Black-dyed oxidation treatment, polished pliers Professional: Chrome-plated pliers Dynamic joint: The structure has an optimum joint thickness ratio of 40:60. Since there is little loss of cutting force, it is possible to cut with less force. Therefore, it has a long life. Heavyweight... Read More

It cuts precisely with a very sharp flat blade that has been polished. Wires remaining on the board for a long life can be cut from a diameter of 0.2 mm. For cutting ultra-fine wires and wires remaining on the base.

Industrial: Black-dyed oxidation treatment, polished pliers Professional: Chrome-plated pliers Dynamic joint: The structure has an optimum joint thickness ratio of 40:60. Since there is little loss of cutting force, it is possible to cut with less force. Therefore, it has a long life. Heavyweight... Read More

The joint adopts forged shaft caulking and has excellent durability. Suitable for cutting various wires including piano wire. Optimal blade position and angle ・ Design that maximizes the principle of leverage ・ Ergonomic handle shape-These three advantages provide high cutting ability with less... Read More

1000V insulation specification. Conforms to DIN EN / IEC 60900 standards. You can easily work with a light force.

Very sturdy due to forging. Conforms to DIN EN / IEC 60900 standard. The 1000V insulated handle, which is made of two types of materials, uses a two-tone color of red and yellow to differentiate it from non-insulated tools. Cuts single wire and multi-core copper / aluminum cables. The blades are ... Read More

Industrial: Black-dyed oxidation treatment, polished pliers Professional: Chrome-plated pliers Dynamic joint: The structure has an optimum joint thickness ratio of 40:60. Since there is little loss of cutting force, it is possible to cut with less force. Therefore, it has a long life.

It has been inspected according to DIN ISO 60900 and can insulate up to AC1000V.

It is a European standard EN60900 compliant product and has 1000V insulation specifications. Achieves weight reduction and high stability by adopting a 3-piece hinge. With a size of 160 mm, it has a cutting capacity of 180 mm class (compared to our company). The large opening makes it easy to cut... Read More

1000V insulation specification. Conforms to DIN EN / IEC 60900 standards. You can easily work with a light force.

1000V insulation specification. Conforms to DIN EN / IEC 60900 standards. Since the head part is a slim type, it is ideal for use in narrow spaces.

Since the head part is a slim type, it is ideal for use in narrow spaces. The hardness of the cutting edge is 63 to 65 HRC. * Steel wires and wire ropes cannot be cut.

Reinforced cutting edge with a hardness exceeding 60HRc. Three cutting diameters / 200kg / mm2: 1.4-1.6-1.8mm. "Safety": The insulation is color coded for easy identification. Side cut pliers

Industrial: Black-dyed oxidation treatment, polished pliers Professional: Chrome-plated pliers Dynamic joint: The structure has an optimum joint thickness ratio of 40:60. Since there is little loss of cutting force, it is possible to cut with less force. Therefore, it has a long life.

It is very sturdy due to forging with a forged axle that can withstand hard continuous use. Conforms to DIN EN / IEC 60900 standard. The 1000V insulated handle, which is made of two types of materials, uses a two-tone color of red and yellow to differentiate it from non-insulated tools. With a fo... Read More

It is forged and very durable. The jaws are visibly stepped to strip the insulation coating to a certain length (11 mm and 16 mm). It can be easily adjusted with knurled screws and lock nuts according to the diameter of single wire or stranded wire. Blade for cutting copper wire up to Φ15mm (5 × ... Read More

Conforms to DIN EN / IEC 60900 standard. The 1000V insulated handle, which is made of two types of materials, uses a two-tone color of red and yellow to differentiate it from non-insulated tools. Cut steel wire armored cables up to 45 mm / 380 mm2 (eg 4 x 95 mm2) with one or both hands. Rugged, e... Read More