Electronics Nippers

A strong round drum type, ideal for cutting copper and iron wires.

Ideal for continuous cutting of printed circuit board lead wires.

A versatile diagonal nipper that can be used in a variety of situations. By using high quality raw materials, precise work is possible and the tool life is extended. Can precisely cut soft and hard wires. At the tip of the blade, you can carefully cut a thin copper wire. The hardness of the blade... Read More

This sharpness is the true value of KEIBA. Easy and clean cutting of 3-core cable. We promise to improve work efficiency.

The rivet is placed closer to the blade than the conventional product. Efficient force is applied to achieve cutting capacity that exceeds 200 mm size nippers.

Electrician VA nippers that are ideal for electrical construction work that professionals have been waiting for! Excellent cutting ability and durability. In addition, it is a professional use model for electrical equipment construction that is also excellent in usability by realizing weight redu... Read More

This sharpness is the true value of KEIBA. Easy and clean cutting of 3-core cable. We promise to improve work efficiency.

The sharpness is different! The blade has a mirror finish to easily cut covered wires such as VA / VVF wires. The cut surface is clean because it is polished sharper than conventional strong nippers.

Suitable for cutting lead wires on printed circuit boards. Wires can be cut smoothly with a sharp cutting edge.

It is a powerful blade specification that can cut hard wire, piano wire, and boot band. Light sharpness due to the adoption of an eccentric mechanism. With a crimping function, 1.25 to 3.5 mm can be easily crimped. With elastomer cover

You can grab and tighten the cable tie to cut it quickly, and this one is all you need to do. The blade has a special serration process to grip the cable tie. There are no leftovers and prevent injuries. For work with cable ties.

High-precision nippers ideal for cutting work related to extremely precise electronics and precision equipment. The blade is straight and the cut surface is flat. The tip is precisely finished, and even dense wires can be cut if the diameter is 0.2 mm or more. The joints are joined with stainless... Read More

The unique blade attachment keeps the initial sharpness. The tip is thin and rounded, so it is convenient for narrow spaces. Workability is improved with a special grip. Made of stainless steel, it does not rust easily and has excellent wear resistance. Ideal for cutting copper and soft wires of ... Read More

By adopting an eccentric mechanism, it can be cut more easily than normal products. The blade is Fujiya's proprietary cutting-edge polishing technology "Micro Mirror Blade", which reduces friction on the wire and improves sharpness. By combining the eccentric mechanism and the micro... Read More

Nippers for cutting optical fibers. With an open spring, you don't have to open your mouth when you work again. The blade is straight and the cut surface is flat. The blade has been carefully hardened. Very sturdy due to forging. The material is vanadium electric steel that has been oil-quenc... Read More

Cutting ability is improved by the state-of-the-art polishing technology "Micro Mirror Blade". VCT line, VA line, VVF line, etc. can be cut smoothly. The coated wire can be cut lightly, and the cut surface is also beautifully finished. With a fall prevention cord attachment shackle, you... Read More

It is a European standard EN100-015-1 compliant product. Used for hard or tough materials frequently used in the electronics and aviation industries, such as nickel wire and tungsten wire. Precision hard metal blades are soldered to forged unprocessed castings. HM cutting blade hardness HRC80-83 ... Read More

Long blade length! VA2.6 x 3 cores can be cut in one shot! IV wire can be cut with a thin blade specification. Cutting power is improved by the eccentric lever principle! Sturdy structural design Special carbon steel KA material Head part is thin and lightweight With crimping function

A pro nipper with a thin and lightweight body. Uses a thin, acute-angled straight blade with a clean cut surface and good bite.

The blade angle is sharpened, and it can sharply cut from thin wires to Φ2.6 mm 3-core wires. We use the original high-grade steel material "Martroy [[(R1)]]" manufactured by Kobe Steel. For cutting cables and wires

The shatterproof method securely holds the cut pieces so that they do not scatter. Suitable for cutting lead wires, etc.

It can precisely cut soft wire, hard wire, piano wire and thin copper wire. The hardness of the blade that has been carefully hardened is approximately HRC63. The joint part can move smoothly by combining two pieces. Very sturdy due to forging. The material is vanadium electric steel that has bee... Read More

The definitive version of VVF line cutting. Easily cuts 4 cores (Φ2.0mm). With a long and sharp blade, you can grab the cable wire and cut the VVF4 core in one go. With a comfortable sharpness, you can get a beautiful cut. A function that can cut iron wire is also added to a part of the blade.

Two PPA resin pads catch the scraps. Firmly grasp the binding band and ultra-fine wires of 0.1 mm or less. Comes with 2 sets of resin spares. Uses an elastomer resin double-molded grip that fits in the hand and is not slippery. For bundling electric wires and cables and for maintenance of automob... Read More

Suitable for cutting lead wires on printed circuit boards. The blade is flash-cut and sharp, and the body is made of stainless steel for excellent durability. With an opening stopper, you can easily change hands. Equipped with a chip scattering prevention device, it is difficult for chips to scat... Read More

The angle of the blade is made thin by 45 degrees to specialize in sharpness. Ideal for cutting VVF lines (VA lines / F cables). The blade uses the latest polishing technology "Micro Mirror Blade". Since it is sharply polished, it has little frictional resistance to the coating resin an... Read More

The blade uses Fujiya's original "micro blade". The coated wire can be cut lightly (20% improvement compared to the conventional product), and the cut surface is also beautifully finished. Can cut up to 2.0 mm x 3 cores of VA / VVF wire. Nippers for cutting electric wires in electri... Read More

-Ideal for continuous cutting of printed circuit board lead wires. (55 S series) -Carbide can be inserted into the blade to cut piano wire up to φ0.5 mm. (CT 55 series) Description: With carbide tip

A versatile diagonal nipper that can be used in a variety of situations. By using high quality raw materials, precise work is possible and the tool life is extended. Can precisely cut soft and hard wires. At the tip of the blade, you can carefully cut a thin copper wire. The hardness of the blade... Read More

With a blade angle of 7 °, the arm-wrist-fingertip-blade tip is almost straight, resulting in a natural and stable working posture and improved work efficiency. The blade is thin and sharp by precision machining, and has outstanding sharpness.

The tip is bent at 60 °, which is convenient in narrow spaces. Made of stainless steel, it does not rust easily and has excellent wear resistance. For assembling electronic components, medical equipment, and hobbies * Be sure to wear protective goggles when cutting. Do not use it for any purpose ... Read More

A thin and sharp blade with a sharp edge. A flat blade surface with a blade angle of 7 ° that is easy to hold and see. It is thin and sharply finished by precision machining so that it can easily bite into the resin of the electric wire. Excellent sharpness. Since the blade surface is flat, a bea... Read More

Easy-to-use and durable "Journeyman series" The "Journeyman Series" was born from the pursuit of ease of use and durability of tools. Uses the latest handle. The ergonomic form and the two-layer structure that combines hard and soft materials fits perfectly into the hands of t... Read More

High-precision nippers ideal for cutting work related to extremely precise electronics and precision equipment. The blade is straight and the cut surface is flat. The tip is precisely finished, and even dense wires can be cut if the diameter is 0.2 mm or more. The joints are joined with stainless... Read More