All Category

Bent Nose Pliers

View : Grid List
Filter

18 Item(s)

Set Ascending Direction
  1. Hyper long pliers bent nose
    IPS (IGARASHI PLIERS) Hyper long pliers bent nose
    Unlike the needle-nose pliers type, it is a super long plier that is resistant to twisting and bending. The grip is induction hardened for excellent durability. Since the mouth opening can be adjusted in 2 steps, you can grasp various shapes firmly. For maintenance of automobiles and agricultural... Read More
    Type  Nose pliers  Jaw Opening Adjustment  2 steps  Maximum Jaw Opening (mm)  25  Nominal Size (mm)  300  Surface Treatment  (Mouth part) induction hardening  Cutting Capacity, Soft Wire (Φmm)  3.2  Tip Shape  Long nose  Dimension A (mm)  295  Tip Thickness (mm)  Mass (g)  360 
    Rating:
    100%
    from S$35.99
    Min. 2 days
  2. Thin Bent Nose Plier
    TOP KOGYO Thin Bent Nose Plier
    The tip is bent
    Cutting Capacity, Steel Wire (Φmm)  2.6  Nominal Size (mm)  200  Overall Length (mm)  201  Mass (g)  240  Maximum Jaw Opening (mm)  25  Trusco Part No.  369-0024  Head Thickness (mm)  5.2  Tip Shape  Bent nose  RoHS directive (corresponding to 10 substances)  Correspondence  Hook Type  Curved claw  Type  Nose pliers 
    from S$32.99
    Min. 2 days
  3. extra thin pliers bent nose
    IPS (IGARASHI PLIERS) extra thin pliers bent nose
    With 3 levels of serrated teeth, you can firmly grasp from extremely small screws to screws and pipes of about 25 mm. Ultra-thin tip processing that is ideal for gaps. With a tip thickness of 2 mm, you can also grip screws and nuts in narrow gaps. Cable connector connection. Installation and adju... Read More
    Type  Nose pliers  Maximum Jaw Opening (mm)  25  Nominal Size (mm)  190  Cutting Capacity, Soft Wire (Φmm)  Tip Shape  Bent nose  Tip Thickness (mm)  Jaw Opening Adjustment  2 steps  Dimension A (mm)  190  Mass (g)  250 
    Rating:
    100%
    from S$36.99
    Min. 2 days
  4. sharp pont bent plier
    IPS (IGARASHI PLIERS) sharp pont bent plier
    A versatile plier that condenses the advantages of pliers and needle-nose pliers. For grasping and turning work in narrow places.
    Surface Treatment  Complete oxidation-free quenching  Tip Shape  Bent nose  Cutting Capacity, Soft Wire (Φmm)  1.7  Overall Length (mm)  163  Jaw Opening Adjustment  2 steps  Maximum Jaw Opening (mm)  20  Mass (g)  160  Width (mm)  72  Type  Nose pliers  Length (mm)  15 
    Rating:
    100%
    from S$29.99
    Min. 2 days
  5. Needle Nose Bent Plier, Stainless Steel
    TOP KOGYO Needle Nose Bent Plier, Stainless Steel
    The tip is bent 60 °, making it ideal for places that are difficult to use straight or for wiring. Workability is improved with a special grip. For precision work * Be sure to wear protective goggles when cutting. Do not use it for any purpose other than the intended use of the tool.
    Head Thickness (mm)  0.6  Overall Length (mm)  127  Trusco Part No.  387-2564  Mass (g)  54  Replacement spring  B-1  RoHS directive (corresponding to 10 substances)  Correspondence  Tip Shape  Needle nose  Type  Nose pliers  Material (Shaft)  Stainless steel (SUS304)  Material (Main Unit)  Stainless steel (SUS420J) 
    from S$38.99
    Min. 2 days
  6. Long Handle Needle Pliers with Bent Tip (Without Jagged Tip)
    MUROMOTO TEKKO Long Handle Needle Pliers with Bent Tip (Without Jagged Tip)
    For after-sales service for office equipment and electrical equipment! For cutting plastic! For disassembling, assembling, and repairing electronics, precious metals, precision equipment, etc.! For assembling plastic models, microcomputers, etc. as a hobby! The handle is lengthened so that work s... Read More
    Trusco Part No.  111-1515  Mass (g)  145  Overall Length (mm)  198  Dimension (mm)  200  Tip Shape  Needle nose / long nose  Type  Nose pliers  Specification  With soft cover and spring 
    from S$46.99
    Min. 2 days
  7. NEPROS Angled Nose Pliers
    nepros NEPROS Angled Nose Pliers
    Dimension T1 (mm)  10  Dimension T2 (mm)  17  Dimension L (mm)  176  Dimension B1 (mm)  19  Nominal Size  200  Mass (g)  215  Dimension B2 (mm)  54  Trusco Part No.  807-0534  Tip Shape  Bent nose  Type  Nose pliers 
    from S$109.90
    Min. 5 days
  8. Bent Tip Needle Pliers
    Three Peaks Giken Bent Tip Needle Pliers
    Overall Length (mm)  136  Tip Shape  Needle nose  Type  Nose pliers  Trusco Part No.  826-6580 
    from S$29.99
    Min. 5 days
  9. for Bicycles pliers 20°bent head
    KNIPEX for Bicycles pliers 20°bent head
    For tightening and loosening thin bolts and nuts. Grasping surface with horizontal streaks. The material is special tool steel that has been oil-quenched and tempered.
    Thickness (mm)  (Head) 3.5  Range to Use (Φmm)  (Pipe) 6/10  Mass (g)  182  Overall Length (mm)  200  Tip Thickness (mm)  3.5  Trusco Part No.  497-2562  Tip Shape  Bent nose  Type  Nose pliers 
    Rating:
    80%
    from S$67.99
    Min. 4 days
  10. 200mm mechanic pliers
    ESCO 200mm mechanic pliers
    Overall Length (mm)  200  Type  Nose pliers 
    from S$76.99
    Min. 3 days
  11. Retaining Ring Pliers for [Over 12mm] Shaft
    ESCO Retaining Ring Pliers for [Over 12mm] Shaft
    Esco Part No.  EA590BD-1  Overall Length (mm)  170  Type  Nose pliers  Tip Shape  Bent nose 
    from S$129.90
    Min. 4 days
  12. Pliers with Bent Tip
    MUROMOTO TEKKO Pliers with Bent Tip
    For after-sales service for office equipment and electrical equipment! For cutting plastic! For disassembling, assembling, and repairing electronics, precious metals, precision equipment, etc.! For assembling plastic models, microcomputers, etc. as a hobby! The handle is lengthened so that work s... Read More
    Dimension (mm)  140  Overall Length (mm)  143  Mass (g)  85  Trusco Part No.  853-4852  Tip Shape  Bent nose  Type  Nose pliers  Specification  With soft cover and spring 
    from S$49.99
    Min. 6 days
  13. Mechanic Pliers Grip: With Comfort Fall Prevention Tool
    KNIPEX Mechanic Pliers Grip: With Comfort Fall Prevention Tool
    Pliers with the strength of the head and tip that are ideal for gripping and bending work under load. The grip surface is notched with a cross mesh. A tip specialized for bending work. For grasping and bending work.
    Trusco Part No.  195-5250  Overall Length (mm)  200  Mass (g)  205  Tip Size (mm)  3.0×2.5  Tip  Corrugated curved claw  color (grip)  Red and blue  Material / Finish  Vanadium electric steel 
    from S$109.90
    Min. 3 days
  14. Bent Nose Pliers ー
    IPS (IGARASHI PLIERS) Bent Nose Pliers ー
    Since the tip is bent at 30 degrees, it is effective for special work and work in narrow places. For maintenance of various machines, automobiles, motorcycles, agricultural machinery, etc.
    Type  Nose pliers  Cutting Capacity, Soft Wire (Φmm)  2.6  Tip Shape  Bent nose  Tip Thickness (mm)  5.5  Jaw Opening Adjustment  2 steps  Maximum Jaw Opening (mm)  25  Nominal Size (mm)  200  Mass (g)  250  Dimension A (mm)  201 
    Rating:
    100%
    Discontinued
  15. ESD Precision Snipe Nose Plier
    C.K TOOLS ESD Precision Snipe Nose Plier
    Achieves excellent strength and durability by hot casting special alloy steel. The precision box joint structure eliminates the need for readjustment, enabling long life and accurate action. Induction hardened cutting edge for outstanding performance. The mirror-polished surface protects circuits... Read More
    Overall Length (mm)  130  Tip (mm)  23  Tip Shape  Bent nose 
    Discontinued
  16. Bent nose pliers 175
    TRUSCO Bent nose pliers 175
    The tip is thin and 4.8 mm. Moreover, since it is bent at an angle of 30 °, it can be conveniently used even in narrow places. There are two stages of mouth opening adjustment.
    Dimension (mm)  175  Trusco Part No.  252-7146  Cutting Diameter, Mild Steel Wire (mm)  Φ2.2 
    Discontinued
  17. Stainless needle nose vent
    TRUSCO Stainless needle nose vent
    A place where the tip is bent 60 ° and it is difficult to use straight.
    Jaw Opening Range (mm)  0~20  Overall Length (mm)  100  Mass (g)  61  Material (Grip)  Cushioning elastomer resin  Material (Main Unit)  SUS420J2  Material (Shaft)  SUS420J2 
    Discontinued
  18. Tapered bent nose pliers (extra fine type)
    H&H Tapered bent nose pliers (extra fine type)
    A hybrid tool with the advantages of pliers, needle-nose pliers and bent nose. 2-step adjustment of mouth opening, maximum 20 mm. With a built-in spring, you will not get tired even during continuous work.
    Maximum Wire Diameter to Cut (Φmm)  1.7 (wire or copper wire)  Size (mm)  165  Mass (g)  182  Jaw Opening Adjustment  Maximum Jaw Opening (mm)  20  Material (Main Unit)  Chrome vanadium steel  Hardness  HRC44~52  Material (Handle)  Vinyl grip 
    Discontinued
View : Grid List
Filter

18 Item(s)

Set Ascending Direction