All Category

Flat Nose Pliers

View : Grid List
Filter

Items 1 - 40 of 44

Set Ascending Direction
  1. Lead Pliers
    FUJIYA Lead Pliers
    Since the grip part is thin and plate-shaped, it is suitable for gripping thin lines in narrow places and processing sheet metal work, and does not damage the gripped object. No jagged edges. * Although it is not knurled, it has some roughness.
    Rating:
    95%
    from S$36.99
    Min. 2 days
  2. Metapen Pliers
    KEIBA Metapen Pliers
    Special tool Radiator fins also fixed
    Size (mm)  140  Dimension A (mm)  145  Overall Length (mm)  145  Dimension E (mm)  17  Dimension B (mm)  34  Dimension C (mm)  51  Dimension D (mm)  Mass (g)  75  Trusco Part No.  760-8322  RoHS directive (corresponding to 10 substances)  Correspondence  Material  MARUTOLOYⅡ  Spring  None 
    Rating:
    87%
    from S$46.99
    Min. 2 days
  3. miniature Lead Pliers
    ENGINEER miniature Lead Pliers
    There are no knurls on the grip and it does not damage the object. The main body has excellent durability due to careful quenching. It is an antistatic grip. Elastomer resin grip that fits in your hand. The body hardness is HRC46 ± 4. With spring without knurled tip Suitable for work on small par... Read More
    Overall Length (mm)  132  Trusco Part No.  368-8259  Mass (g)  69  RoHS directive (corresponding to 10 substances)  Correspondence  Hardness  HRC46±4  Material  S58C 
    Rating:
    80%
    from S$29.99
    Min. 2 days
  4. Lead Pliers
    ENGINEER Lead Pliers
    The tip is thin and there are no knurls on the grip, so it does not damage the object. No jagged tip For pulling out, knobs, bending work, etc.
    Mass (g)  134  Overall Length (mm)  158  Trusco Part No.  368-8186  RoHS directive (corresponding to 10 substances)  Correspondence  Material  Stainless steel 
    from S$27.99
    Min. 2 days
  5. Bent Tip Lead Wire Pliers, Stainless Steel
    Three Peaks Giken Bent Tip Lead Wire Pliers, Stainless Steel
    It is a very light stainless steel tool with an average weight of about 47% (maximum value) compared to our products of the same size. Stainless steel has the property of being resistant to rust. You can use it around water with confidence. Tip angle 45 °. Elastomer resin grip that fits comfortab... Read More
    Dimension H (mm)  1.2  Dimension D (mm)  14  Dimension A (mm)  149  Overall Length (mm)  149  Nominal Size (mm)  150  Dimension G (mm)  Trusco Part No.  381-9477  Blade Angle (°)  45  Dimension B (mm)  46  Mass (g)  55  Dimension E (mm)  Dimension C (mm)  89  Material (Grip)  Elastomer  Hardness  HRC48-53 (blade)  Material  stainless steel 
    Rating:
    100%
    from S$29.99
    Min. 2 days
  6. Lead Pliers
    ENGINEER Lead Pliers
    The tip is thin and there are no knurls on the grip, so it does not damage the object. No jagged tip For pulling out, knobs, bending work, etc.
    Overall Length (mm)  140  Trusco Part No.  395-5397  Mass (g)  67  RoHS directive (corresponding to 10 substances)  Correspondence  Material  Stainless steel 
    Rating:
    100%
    from S$27.99
    Min. 2 days
  7. Trinity Wide Tip Lead Wire Pliers (No Serration) 130mm
    TSUNODA Trinity Wide Tip Lead Wire Pliers (No Serration) 130mm
    Sandwich structure that does not rattle even when used! Since the grip is wide and flat, you can bend the metal plate and crush caulking balls and ball chips.
    Mass (g)  65  Head Thickness (mm)  Overall Length (mm)  128  Pattern Width (mm)  52  Head Width (mm)  11  Trusco Part No.  785-2843  Tip Length (mm)  21 
    Rating:
    100%
    from S$32.99
    Min. 2 days
  8. Professional Hobby flat connection Lead Pliers
    KEIBA Professional Hobby flat connection Lead Pliers
    Processed without scratching. For bending and grasping work
    Size (mm)  120  Overall Length (mm)  126  Dimension A (mm)  126  Dimension B (mm)  28.5  Dimension C (mm)  50  Dimension D (mm)  Mass (g)  70  Trusco Part No.  760-8161  RoHS directive (corresponding to 10 substances)  Correspondence  Spring  Included  Material  MARUTOLOYⅠ 
    Rating:
    100%
    from S$32.99
    Min. 2 days
  9. Stainless Thin Nose Lead Plier
    Three Peaks Giken Stainless Thin Nose Lead Plier
    It is a very light stainless steel tool with an average weight of about 47% (maximum value) compared to our products of the same size. Stainless steel has the property of being resistant to rust. You can use it around water with confidence. Elastomer resin grip that fits comfortably in your hand.... Read More
    Dimension H (mm)  1.2  Dimension D (mm)  14  Nominal Size (mm)  150  Overall Length (mm)  152  Dimension A (mm)  152  Dimension G (mm)  Trusco Part No.  381-9469  Dimension B (mm)  46  Mass (g)  55  Dimension E (mm)  Dimension C (mm)  89  Material (Grip)  Elastomer  Hardness  HRC48-53 (blade)  Material  stainless steel 
    Rating:
    70%
    from S$27.99
    Min. 2 days
  10. sharp pont Lead Pliers
    TSUNODA sharp pont Lead Pliers
    Overall Length (mm)  146  Material  Stainless steel, grip: Elastomer resin  Trusco Part No.  125-0221  Mass (g)  75 
    Rating:
    100%
    from S$21.99
    Min. 2 days
  11. Lead Pliers 150mm
    Three Peaks Giken Lead Pliers 150mm
    It is sturdy and has a wide tip to grip strongly, and supports various processing such as wire rods and sheet metal. There is no cutting ability. With tip notch.
    Mass (g)  125  Overall Length (mm)  150  Trusco Part No.  853-5008  Material  S55C  Material (Grip)  Vinyl 
    from S$26.99
    Min. 2 days
  12. Professional Hobby flat connection Lead Pliers
    KEIBA Professional Hobby flat connection Lead Pliers
    Processed without scratching. For bending and grasping work
    Size (mm)  120  Dimension A (mm)  124  Overall Length (mm)  124  Dimension B (mm)  28.5  Dimension C (mm)  50  Mass (g)  55  Dimension D (mm)  Trusco Part No.  828-3789  Spring  Available (one side fixed structure)  RoHS directive (corresponding to 10 substances)  Correspondence  Material  MARUTOLOYⅠ 
    Rating:
    100%
    from S$29.99
    Min. 2 days
  13. miniature Lead Pliers
    HOZAN (HOZAN TOOL INDUSTRIAL) miniature Lead Pliers
    With knurling, wide, thin type Miniature lead pliers with knurling for increased holding power.
    Overall Length (mm)  116.5  Hardness HRC  42  Mass (g)  42  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$35.99
    Min. 2 days
  14. long stainless Lead Pliers
    Three Peaks Giken long stainless Lead Pliers
    It is a very light stainless steel tool with an average weight of about 47% (maximum value) compared to our products of the same size. Stainless steel has the property of being resistant to rust. You can use it around water with confidence. Elastomer resin grip that fits comfortably in your hand.... Read More
    Dimension G (mm)  Dimension D (mm)  14  Nominal Size (mm)  165  Dimension A (mm)  166  Overall Length (mm)  166  Trusco Part No.  381-9426  Dimension H (mm)  Dimension B (mm)  48  Dimension E (mm)  Mass (g)  80  Dimension C (mm)  97  Material (Grip)  Elastomer  Hardness  HRC50-55 (blade)  Material  stainless steel 
    from S$43.99
    Min. 2 days
  15. Short Lead Wire Pliers, Stainless Steel
    Three Peaks Giken Short Lead Wire Pliers, Stainless Steel
    It is a very light stainless steel tool with an average weight of about 47% (maximum value) compared to our products of the same size. Stainless steel has the property of being resistant to rust. You can use it around water with confidence. Elastomer resin grip that fits comfortably in your hand.... Read More
    Dimension D (mm)  14  Overall Length (mm)  140  Nominal Size (mm)  140  Dimension A (mm)  140  Dimension G (mm)  Dimension H (mm)  Trusco Part No.  381-9485  Dimension B (mm)  46  Mass (g)  50  Dimension E (mm)  Dimension C (mm)  89  Material (Grip)  Elastomer  Hardness  HRC48-53 (blade)  Material  stainless steel 
    from S$26.99
    Min. 2 days
  16. Lead Pliers
    MUROMOTO TEKKO Lead Pliers
    Since the tip is wide, you can grasp the product stably. For work and processing of wires, tin plates, etc. When grabbing something that is hot and untouchable.
    Overall Length (mm)  150  Mass (g)  110 
    from S$44.99
    Min. 2 days
  17. Lead Pliers (sharp pont type )
    KEIBA Lead Pliers (sharp pont type )
    Flat processing that does not damage the work piece even when grasping, pulling, or bending. For bending and grasping work
    Size (mm)  140  Dimension A (mm)  144  Dimension B (mm)  34  Dimension C (mm)  50  Dimension D (mm)  Material  MARUTOLOYⅠ  Spring  None 
    from S$38.99
    Min. 2 days
  18. Bent Tip Lead Wire Pliers
    TSUNODA Bent Tip Lead Wire Pliers
    Trusco Part No.  125-0222  Overall Length (mm)  144  Mass (g)  75  Material  stainless steel 
    from S$21.99
    Min. 2 days
  19. MERRY Lead Wire Pliers, Serrated, RD310
    MUROMOTO TEKKO MERRY Lead Wire Pliers, Serrated, RD310
    The tip is widely and toughly processed. Grasp work for iron wire, copper wire, and thin plates.
    Overall Length (mm)  160  Trusco Part No.  368-9221  Included Accessories  Softcover  Mass (g)  115 
    from S$46.99
    Min. 2 days
  20. Lead Pliers
    KEIBA Lead Pliers
    Flat processing that does not damage the work piece even when grasping, pulling, or bending. For bending and grasping work
    Dimension E (mm)  14  Size (mm)  150  Overall Length (mm)  153  Dimension A (mm)  153  Dimension B (mm)  41  Dimension C (mm)  51  Dimension D (mm)  Trusco Part No.  828-3765  Mass (g)  85  RoHS directive (corresponding to 10 substances)  Correspondence  Material  MARUTOLOYⅠ  Spring  None 
    Rating:
    100%
    from S$35.99
    Min. 5 days
  21. Trinityextra thin Lead Pliers 130mm
    TSUNODA Trinityextra thin Lead Pliers 130mm
    Sandwich structure that does not rattle even when used! The tip grip is hardened by quenching, making it difficult to settle even if it is thin.
    Tip Length (mm)  21  Trusco Part No.  785-2908  Mass (g)  65  Head Thickness (mm)  Head Width (mm)  10  Pattern Width (mm)  52  Overall Length (mm)  128 
    from S$39.99
    Min. 2 days
  22. Mini-Epo Lead Wire Pliers, Thin Tip, Stainless Steel
    KEIBA Mini-Epo Lead Wire Pliers, Thin Tip, Stainless Steel
    Made of stainless steel, it is both light and rigid. Resistant to rust. Processed without scratching. For bending, grasping, and turning
    Overall Length (mm)  148  Dimension A (mm)  148  Size (mm)  150  Dimension B (mm)  34  Dimension C (mm)  48  Mass (g)  64  Dimension D (mm)  8.5  Trusco Part No.  828-3828  RoHS directive (corresponding to 10 substances)  Correspondence  Spring  Included  Material  Stainless steel SUS420J2 
    from S$29.99
    Min. 5 days
  23. sharp pont Lead Pliers
    Three Peaks Giken sharp pont Lead Pliers
    Trusco Part No.  853-5037 
    from S$22.99
    Min. 3 days
  24. Short Lead Wire Pliers
    Three Peaks Giken Short Lead Wire Pliers
    Trusco Part No.  853-5039 
    from S$22.99
    Min. 3 days
  25. Lead Wire Pliers, without Line (with Plastic Cover)
    VICTOR (Hanazono Tool) Lead Wire Pliers, without Line (with Plastic Cover)
    Since the grip is thin and plate-shaped, it is suitable for grasping fine lines and sheet metal processing in narrow spaces. There are no streaks on the grip, and even if you pinch an item, it will not be scratched.
    Dimension C (mm)  14  Dimension (mm)  150  Overall Length A (mm)  152  Dimension B (mm)  48  Size (inch)  6”  TGK Part No.  775-57-49-32  Dimension D (mm)  Trusco Part No.  814-4716  Mass (g)  90  Specification  With soft cover, without gripper 
    from S$39.99
    Min. 12 days
  26. Mini Lead Plier
    Three Peaks Giken Mini Lead Plier
    Grab / crush / bend / pull.
    Nominal Size (mm)  115  Hardness HRC  42 to 50 (body)  Mass (g)  60  Material  Chromium vanadium steel 
    from S$26.99
    Min. 3 days
  27. Trinity Sharp Tip Lead Wire Pliers (No Serration) 130mm
    TSUNODA Trinity Sharp Tip Lead Wire Pliers (No Serration) 130mm
    Sandwich structure that does not rattle even when used! Can be attached and detached without damaging small parts that are difficult to hold by hand.
    Mass (g)  65  Overall Length (mm)  128  Head Thickness (mm)  Tip Length (mm)  21  Trusco Part No.  785-2851  Pattern Width (mm)  52  Head Width (mm)  11 
    from S$33.99
    Min. 3 days
  28. mini Lead Pliers
    Three Peaks Giken mini Lead Pliers
    Trusco Part No.  826-6583 
    from S$27.99
    Min. 5 days
  29. Mini-Epo 45° Bent Tip Needle Nose Pliers, Stainless Steel
    KEIBA Mini-Epo 45° Bent Tip Needle Nose Pliers, Stainless Steel
    Made of stainless steel, it is both light and rigid. Resistant to rust. Processed without scratching. Convenient for intricate and narrow spaces. For bending, grasping, and turning
    Overall Length (mm)  145  Dimension A (mm)  145  Size (mm)  150  Dimension B (mm)  31.4  Dimension E (mm)  45  Dimension C (mm)  48  Mass (g)  64  Dimension D (mm)  8.5  Trusco Part No.  828-3829  RoHS directive (corresponding to 10 substances)  Correspondence  Spring  Included  Material  Stainless steel SUS420J2 
    from S$29.99
    Min. 5 days
  30. Professional Hobby o-ring Opener
    KEIBA Professional Hobby o-ring Opener
    Useful when opening the ring. Also for cutting wire rods. For cutting / bending / grabbing work
    Cutting Diameter, Mild Steel Wire (mm)  1.2  Cutting Diameter, Annealed Copper Wire (mm)  1.4  Size (mm)  120  Dimension A (mm)  126  Overall Length (mm)  126  Dimension B (mm)  36  Dimension C (mm)  50  Dimension D (mm)  6.2  Mass (g)  66  Trusco Part No.  828-3803  RoHS directive (corresponding to 10 substances)  Correspondence  Spring  Included  Material  MARUTOLOYⅠ 
    from S$39.99
    Min. 5 days
  31. Bent Tip Lead Wire Pliers
    Three Peaks Giken Bent Tip Lead Wire Pliers
    Trusco Part No.  853-5038 
    from S$24.99
    Min. 3 days
  32. electronics Lead Pliers
    KEIBA electronics Lead Pliers
    Flat processing that does not damage the work piece even when grasping, pulling, or bending. For bending and grasping work
    Size (mm)  140  Dimension C (mm)  50  Dimension D (mm)  Material  MARUTOLOYⅠ  Spring  None 
    from S$39.99
    Min. 5 days
  33. Lead Wire Plier, 45 Degrees
    S2-tools Lead Wire Plier, 45 Degrees
    Made of rust-resistant all-stainless steel. It has the best feel and a fully polished finish. For assembly, repair, repair, professional hobby, ornaments, model making, etc. of communication equipment, electronic equipment, precision equipment, personal computers, etc.
    Overall Length (mm)  130  Mass (g)  40  Type  45 degree angle  Trusco Part No.  774-6440  Material  Stainless steel 
    from S$27.99
    Min. 6 days
  34. Electronics lead pliers (90 degree type)
    KEIBA Electronics lead pliers (90 degree type)
    The toughness of the tip is heat-treated with the utmost care. The flat tip does not damage the target. We use the original high-grade steel material "Martroy [[(R1)]]" manufactured by Kobe Steel. * Please wear protective goggles during use. * Please use it according to the purpose. * B... Read More
    Overall Length (mm)  144  Tip Size (mm)  1±0.1×4.5±0.5  Mass (g)  75  Trusco Part No.  828-3770  Spring  None 
    from S$229.90
    Min. 12 days
  35. cutter with flat plier
    KNIPEX cutter with flat plier
    Ideal for grabbing and cutting precision electronic components. The head is long and has a tapered shape. The hardness of the cutter, which has been carefully hardened, is approximately HRC60. The material is special tool steel that has been oil-quenched and tempered.
    Width (mm)  (Joint part) 12.5, (Mouth tip) 4.0  Thickness (mm)  (Joint part) 7.0  Cutting capacity (Φmm)  1.6  Overall Length (mm)  140  Cutting Capacity, Soft Wire (Φmm)  2.5  Jaw Length (mm)  35  Mass (g)  75 
    from S$68.99
    Min. 4 days
  36. extra thin Lead Pliers
    TOP KOGYO extra thin Lead Pliers
    Can be crushed or bent at the tip
    Nominal Size (mm)  130 
    from S$55.99
    Min. 4 days
  37. Lead Pliers Straight
    S2-tools Lead Pliers Straight
    Made of rust-resistant all-stainless steel. It has the best feel and a fully polished finish. For assembly, repair, repair, professional hobby, ornaments, model making, etc. of communication equipment, electronic equipment, precision equipment, personal computers, etc.
    Overall Length (mm)  130  Mass (g)  40  Trusco Part No.  774-6431  Material  Stainless steel  Type  Straight, without scratches at the tip 
    from S$27.99
    Min. 6 days
  38. Merry Thin Flat Pliers 150mm
    MUROMOTO TEKKO Merry Thin Flat Pliers 150mm
    Discontinued
  39. Lead pliers
    FUJIYA Lead pliers
    Since the grip is thin and plate-shaped, it is suitable for gripping thin lines and processing sheet metal work in narrow places, and does not damage the grip. Ideal for assembling, repairing, and disassembling electronics and precision equipment. In particular, the tip is tough, and it has outst... Read More
    Specification  No gripping part, plating  Nominal Size (mm)  170  Mass (g)  125  Overall Length (mm)  172 
    Discontinued
  40. Lead pliers 330BF-150
    Tokyo Glass Kikai (TGK) Lead pliers 330BF-150
    Suitable for adjusting and assembling small parts.
    Dimension (mm)  150  Type  330B-150  TGK Part No.  775-57-49-32  Trusco Part No.  814-4716  Mass (g)  90  Tip Part  No streak 
    Discontinued
View : Grid List
Filter

Items 1 - 40 of 44

Set Ascending Direction