All Category

Standard Cutting Pliers

View : Grid List
Filter

Items 1 - 40 of 193

Set Ascending Direction
  1. plier (JIS)
    MonotaRO plier (JIS)
    With JIS standard products, you can do many tasks such as cutting, bending, pinching, pulling, and twisting iron and copper wires. * Do not use for any purpose other than its intended purpose. * Do not use for objects with electricity. * Please keep out of reach of children. * Do not use in place... Read More
    Width (mm)  (Tip open) 20 or more  Cutting Capacity, Copper Wire (Φmm)  Cutting Capacity (Φmm) Soft Iron Wire  Blade Hardness  56~64HRC  Material  S55C 
    Rating:
    88%
    from S$8.89
    Min. 2 days
  2. VAplier
    Marvel VAplier
    Material  Carbon steel  Overall Length (mm)  212  Mass (g)  360  Trusco Part No.  116-1719 
    from S$58.99
    Min. 2 days
  3. Pliers High Quality (JIS)
    MonotaRO Pliers High Quality (JIS)
    High-performance pliers with the same standards as Japanese domestic manufacturers, carefully finished by craftsmen one by one. Lightweight, tough and very easy to use pliers. Since it uses special steel developed independently, it has excellent sharpness and durability. This product is the basic... Read More
    RoHS directive (corresponding to 10 substances)  Correspondence  Blade Hardness  HRC57~61  Spring  None  Surface Treatment  Rust prevention 
    Rating:
    99%
    from S$19.99
    Min. 2 days
  4. plier (resin Tire Levers, with Grip )
    FUJIYA plier (resin Tire Levers, with Grip )
    The most standard pliers that can be used in a wide range of applications such as electrical work, woodworking / metalworking, and assembly / repair of mechanical parts. The grip is notched so that it is not slippery. JIS standard compliant. With a fall prevention hole, it is safe even when worki... Read More
    Rating:
    88%
    from S$43.99
    Min. 2 days
  5. High-Grade Series, The Pliers
    KEIBA High-Grade Series, The Pliers
    The pliers are smooth even if they rust! Using gunmetal for the moving parts, the pliers have the ultimate smoothness and terrifying durability. A tough structure that does not move even after 100,000 continuous opening and closing tests.
    RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    93%
    from S$43.99
    Min. 2 days
  6. plier (coating grip )
    KTC plier (coating grip )
    It has the function of cutting copper wire and wire, and grasping and bending wires, thin plates and small parts. A popular tool suitable for wire work and sheet metal processing. The handle is coated with vinyl.
    Rating:
    93%
    from S$46.99
    Min. 2 days
  7. JISstandard plier
    GISUKE (Takagi) JISstandard plier
    "Standard" size. For those who want to prioritize ease of use. With a fall prevention cord mounting hole to firmly grasp, bend, and cut electric wires, wires, metal plates, etc. For electrical work, metal processing, wire processing
    Hardness HRC (Blade)  58~64  Material (Main Unit)  Carbon steel S58C for machine structure 
    from S$13.99
    Min. 2 days
  8. plier (resin Tire Levers, with Grip )
    FUJIYA plier (resin Tire Levers, with Grip )
    Excellent durability and lightweight. With fall prevention strap mounting holes.
    Trusco Part No.  117-8318  Dimension f (mm)  12.5  Dimension c (mm)  13.5  Dimension e (mm)  15  Nominal Size (mm)  175  Overall Length A (mm)  192  Dimension b (mm)  24  Mass (g)  260  Cutting Capacity, Steel Wire (Φmm)  3.0  Cutting Capacity, Copper Wire (Φmm)  3.5  Dimension d (mm)  50  Dimension g (mm)  6.3  JIS Standard  JIS B 4623 (sizes 150, 175, 200) 
    from S$46.99
    Min. 2 days
  9. Pliers (Master Grip Type ) 190mm
    TONE Pliers (Master Grip Type ) 190mm
    Many operations such as cutting, bending, pinching, pulling, and twisting copper wires and wires are possible. It is a very convenient tool used for electrical work, wire work, sheet metal work, etc. The blade is strong and can cut not only copper wire but also thick iron wire. For cutting, bendi... Read More
    Trusco Part No.  390-0011  Cutting Capacity, Steel Wire (Φmm)  1.8  Overall Length (mm)  190  Specification  No fall prevention string mounting hole  Mass (g)  280 
    Rating:
    100%
    from S$29.99
    Min. 2 days
  10. black G plier
    KENOH black G plier
    For grabbing and pinching things, and cutting iron and copper wires. Easy-to-grip double-grip black grip series.
    from S$6.19
    Min. 2 days
  11. TTC plier
    TSUNODA TTC plier
    Uses an elastomer resin double-molded grip that fits in your hand for cutting wires and bending metal plates and is not slippery. * Do not cut an object that exceeds its capacity.
    Head Thickness (mm)  13  Cutting Diameter, Mild Steel Wire (mm)  2.6  Blade Hardness  58~64HRC  Material  High carbon steel  Blade processing  Induction hardening 
    from S$12.99
    Min. 2 days
  12. mini plier
    KENOH mini plier
    The double-molded grip with special rubber has improved ease of handling due to its "easy-to-grip shape" and "non-slip, comfortable fit". The KENOH mini series has a new grip! The double-molded grip with special rubber has improved ease of handling with its "easy-to-grip ... Read More
    Overall Length (mm)  120  Mass (g)  75 
    Rating:
    100%
    from S$6.19
    Min. 2 days
  13. Pliers, with Elastomer Grip
    VICTOR (Hanazono Tool) Pliers, with Elastomer Grip
    The most standard pliers can be used for a wide range of purposes. Elastomer resin grip that fits in your hand.
    Rating:
    100%
    from S$49.99
    Min. 2 days
  14. plier holder
    TRUSCO plier holder
    It can be taken out one by one smoothly, which is convenient for organizing and storing. For organizing and storing pliers, nippers, pliers, etc.
    Cutting Capacity, Hard Wire (Φmm)  Number of storage  Material  ABS resin, aluminum  Mass (g)  457.5  Overall Length (mm)  300  Trusco Part No.  114-1964 
    Rating:
    100%
    from S$37.99
    Min. 2 days
  15. plier
    MUROMOTO TEKKO plier
    It has a uniquely shaped molded cover with an appropriate anti-slip on the grip, and has an excellent fit to the hand.
    Material (Handle)  Molded cover 
    Rating:
    100%
    from S$39.99
    Min. 2 days
  16. Pro-Hobby Wire Loop Plier
    KEIBA Pro-Hobby Wire Loop Plier
    For circular processing of wire rods. Tip size 3 steps (thin Φ1.5 mm or less, medium Φ2.0 mm, thick Φ3.0 mm) For bending / grabbing / rolling work
    Size (mm)  110  Overall Length (mm)  110  Dimension A (mm)  110  Dimension B (mm)  15.4  Dimension C (mm)  50  Mass (g)  55  Dimension D (mm)  Spring  Available (one side fixed structure)  RoHS directive (corresponding to 10 substances)  Correspondence  Material  MARUTOLOYⅠ 
    Rating:
    100%
    from S$44.99
    Min. 2 days
  17. JIS Plier
    TRUSCO JIS Plier
    Standard type pliers. Since it uses special steel developed independently, it has excellent sharpness and durability, and can be used for a wide range of purposes from professionals to general households. Electricity, telephone construction, civil engineering, construction, machine assembly repai... Read More
    from S$29.99
    Min. 2 days
  18. Plier
    KNIPEX Plier
    The grip surface has a shape that corresponds to plates and pipes, and can be used in a wide range of applications. The side cutter can cut soft and hard wires. It is also possible to cut thick cables with a long side cutter. The hardness of the cutter, which has been carefully hardened, is appro... Read More
    Rating:
    100%
    from S$36.99
    Min. 2 days
  19. red line plier
    KENOH red line plier
    A rubber grip handle that is non-slip and fits comfortably in your hand. A sturdy handle that stands out with a red line on a black background. For grabbing and pinching things, and cutting iron and copper wires.
    Rating:
    80%
    from S$8.69
    Min. 2 days
  20. KingTTC plier JIS
    TSUNODA KingTTC plier JIS
    It is a JIS certified product with reliable quality. (CP-150 / CP-175 / CP-200) Convenient for electrical work, wire cutting, and bending of metal plates. Electrical work, wire cutting, metal plate bending. * It is a non-insulated tool. * Please turn off the power before use. * Please do not use ... Read More
    Cutting ability (Φmm 2 ) Strand VSF  0.8  Cutting ability (Φmm) Stainless steel  0.8 
    from S$19.99
    Min. 2 days
  21. Lightweight Pliers
    Three Peaks Giken Lightweight Pliers
    Since it is about 30% lighter than before (compared to the company's conventional product), it has less fatigue and can withstand long hours of work. Since the blade is long, the electric wire (three cores) can be cut. Since the distance between the blade and the fulcrum is shorter than the c... Read More
    Material  S58C  Material (Handle)  Elastomer resin  Blade Hardness  HRC/56~64  Cutting diameter (stranded mm 2 5.5 
    Rating:
    60%
    from S$39.99
    Min. 2 days
  22. Pliers (with Molded Cover)
    VICTOR (Hanazono Tool) Pliers (with Molded Cover)
    Standard pliers can be used for a wide range of purposes such as electrical work, metalwork, assembly and repair of mechanical parts. The grip part is a manufacturer's original molded cover specification and can be widely used from electricians to general households. Standard pliers often use... Read More
    Specification  With molded cover and gripper 
    from S$43.99
    Min. 2 days
  23. plier
    TOP KOGYO plier
    With excellent cutting and durable vinyl grip
    from S$39.99
    Min. 2 days
  24. POWER Pliers, Offset Pivot, with Elastomer Grip
    TSUNODA POWER Pliers, Offset Pivot, with Elastomer Grip
    By shortening the distance from the blade edge (point of action) to caulking (fulcrum) compared to conventional products, the load (grip strength) during cutting is reduced by 30%.
    from S$27.99
    Min. 2 days
  25. JIS plier
    Strong Tool JIS plier
    Material  Body: Carbon steel Grip: PVC + TPR  Cutting Capacity, Copper Wire (Φmm)  4.0  Specification  Grab, pinch, turn, cut 
    from S$11.99
    Min. 4 days
  26. plier
    TONE plier
    Many operations such as cutting, bending, pinching, pulling, and twisting copper wires and wires are possible. It is a very convenient tool used for electrical work, wire work, sheet metal work, etc. The blade is strong and can cut not only copper wire but also thick iron wire. For cutting, bendi... Read More
    Overall Length (mm)  164  Trusco Part No.  381-9990  Cutting Capacity, Steel Wire (Φmm)  1.6  Specification  No fall prevention string mounting hole  Mass (g)  200 
    from S$29.99
    Min. 2 days
  27. plier (resin grip )
    LOBSTER (LOBTEX) plier (resin grip )
    Standard function pliers. J200PC has a simple crimping function (1.25 to 2 mm 2 ). Ideal for electrical work, construction civil engineering, machine assembly / repair work Grab, bend, cut, crimp (J200PC only) * Piano wire cannot be cut. * Do not use for items with electricity. * The grip does no... Read More
    from S$29.99
    Min. 2 days
  28. JISplier
    MUROMOTO TEKKO JISplier
    A standard plier with excellent durability using the finest special steel. It is knurled and can be turned with nuts. The cutting edge is polished with a diamond wheel and has excellent sharpness. We made pliers and used the finest special steel, which is the crystal of 70 years of technology. It... Read More
    Material (Handle)  Softcover 
    Rating:
    100%
    from S$39.99
    Min. 2 days
  29. Pliers (Master Grip Type )
    TONE Pliers (Master Grip Type )
    Many operations such as cutting, bending, pinching, pulling, and twisting copper wires and wires are possible. It is a very convenient tool used for electrical work, wire work, sheet metal work, etc. The blade is strong and can cut not only copper wire but also thick iron wire. For cutting, bendi... Read More
    Overall Length (mm)  224  Mass (g)  330  Trusco Part No.  390-0029  Specification  No fall prevention string mounting hole  Cutting Capacity, Steel Wire (Φmm) 
    from S$36.99
    Min. 2 days
  30. Dies plier
    MUROMOTO TEKKO Dies plier
    The pliers have a W3 / 8 thread correction function. Electrical work related. Corrected the thread of the chopped bolt.
    Included Accessories  With molded cover  Cutting capacity (Φmm) VA / VVF wire (3-core)  2 x 3 cores 
    from S$67.99
    Min. 2 days
  31. plier
    VICTOR (Hanazono Tool) plier
    Functions for professional use! Excellent sharpness, durability, and manual cutting by skilled workers High-performance special steel blades are induction hardened by the manufacturer to achieve sharp sharpness. Professional use pliers specified in Electrical work, civil engineering, construction... Read More
    Cutting Capacity, Steel Wire (Φmm)  2.2  Cutting Capacity, Piano Wire (Φmm)  1.2  Material  S58C-60M  Blade Hardness  HRC58~61 
    from S$24.99
    Min. 3 days
  32. plier
    FUJIYA plier
    This is the prototype of JIS standard pliers. Since it uses special steel developed independently, it has excellent sharpness and durability, and can be used for a wide range of purposes from professionals to general households. Pliers for internal and external line construction, electrical equip... Read More
    Specification  No fall prevention string mounting hole  Cutting capacity (Φmm) VA / VVF wire (3-core)  2.0 
    from S$43.99
    Min. 2 days
  33. light weight plier
    GISUKE (Takagi) light weight plier
    Approximately 28% lighter than conventional products and less tiring! With fall prevention cord mounting hole. For electrical work, metal work, wire processing
    Overall Length (mm)  184  Dimensions (H x W x D) (mm)  184×50×16  Mass (g)  205  Hardness HRC (Blade)  58~64  Material (Main Unit)  Carbon steel S58C for machine structure 
    Rating:
    40%
    from S$24.99
    Min. 2 days
  34. excellent series plier
    VICTOR (Hanazono Tool) excellent series plier
    Elastomer grip specifications that can reduce hand fatigue. Professional functions, sharpness, outstanding durability, and manual blade attachment by skilled workers! It has excellent chemical resistance and electric resistance, and is environmentally friendly because it is a material that does n... Read More
    from S$29.99
    Min. 3 days
  35. FIT(Air Cylinders, CS1 Series, Type F ) plier spring with
    TSUNODA FIT(Air Cylinders, CS1 Series, Type F ) plier spring with
    The easy-to-grip grip fits gently on women's hands! Ideal for processing boards and wires!
    Cutting Capacity, Copper Wire (Φmm)  2.6  Mass (g)  110  Overall Length (mm)  140  Head Thickness (mm)  10  Cutting ability (Φmm) Stranded wire  Trusco Part No.  828-3537  Tip Length (mm)  26  Cutting capacity (mm) stainless steel  Φ0.8  Cutting Capacity, Steel Wire (Φmm)  Pattern Width (mm)  42  Head Width (mm)  17 
    Rating:
    80%
    from S$22.99
    Min. 2 days
  36. Pliers, for Electric Work set
    Strong Tool Pliers, for Electric Work set
    Multi-functional crimping pliers that compactly summarize various functions required for household wiring and precision wiring work
    from S$12.99
    Min. 4 days
  37. micro plier
    Strong Tool micro plier
    Overall Length (mm)  130  Cutting Capacity, Steel Wire (Φmm)  Material  Body: Carbon steel Grip: PVC  Specification  Grab, pinch, turn, cut  Trusco Part No.  859-2053 
    from S$5.39
    Min. 4 days
  38. 4pcs plier set
    SATA 4pcs plier set
    Cuts plastic, cables and metal materials.
    from S$119.90
    Min. 7 days
  39. Standard plier
    FUJIYA Standard plier
    It can be cut more easily than conventional products due to the principle of eccentric leverage.
    Cutting capacity (Φmm) VA / VVF wire (3-core)  2.6  Specification  There is a hole to prevent the fall 
    from S$49.99
    Min. 3 days
  40. flat plier
    KNIPEX flat plier
    The head is short and flat. The material is chrome vanadium steel that has been oil-quenched and tempered. * The comfort handle (this product) is not insulated.
    from S$44.99
    Min. 4 days
View : Grid List
Filter

Items 1 - 40 of 193

Set Ascending Direction