All Category

Blacksmith Pliers

Yatco is a tool for grabbing sheet metal, nails and iron heated at high temperatures. The top of the tip is jagged, making it difficult to slip when grasped. This tool is often used for the production of beads and resin accessories, wire work, fire-making, and assembly of precision parts. They are often made of stainless steel or iron, and some grips have an elastomeric resin or nylon cover to prevent slipping. There are several types such as for ceramics, for watches, and for micro Yatco, so you need to be careful when purchasing.
View : Grid List
Filter

Items 1 - 40 of 46

Set Ascending Direction
  1. Precision Tong Plier
    ANEX Precision Tong Plier
    You can grab it strongly. Suitable for bending and crushing boards and wires. There is no knurling on the grip and it does not damage the other party.
    Mass (g)  47  Material  Stainless steel SUS410 
    Rating:
    100%
    from S$16.99
    Min. 2 days
  2. Firework Pliers, Flat Tip
    MORIMITSU Firework Pliers, Flat Tip
    Rating:
    75%
    from S$55.99
    Min. 2 days
  3. Precision Tong Plier, With Rubber Grip
    ANEX Precision Tong Plier, With Rubber Grip
    Hand-friendly elastomer resin is used for the grip to open and close with a soft feel. You can grab it strongly. Suitable for bending and crushing boards and wires. There is no knurling on the grip and it does not damage the other party. Ideal for work that dislikes rust.
    Material (Grip)  PP + elastomer resin  Material  Stainless steel (SUS410) 
    Rating:
    88%
    from S$19.99
    Min. 2 days
  4. Tongs (flat type )
    MORIMITSU Tongs (flat type )
    For work such as wire. Bending work of iron plates and strips.
    Type  Flat type 
    Rating:
    100%
    from S$43.99
    Min. 2 days
  5. Stainless Steel Tongs Cable Ties, Standard Sype
    TRUSCO Stainless Steel Tongs Cable Ties, Standard Sype
    There is no knurling on the grip and it does not hurt the opponent. Work to bend or crush boards and wires.
    Material / Finish  SUS410  Shape  Standard 
    from S$15.99
    Min. 2 days
  6. Carpenter's Pliers
    KNIPEX Carpenter's Pliers
    Ideal for harsh use. Since it is precisely processed, it is often used by professional craftsmen. Designed with extremely high wear resistance and excellent weight balance. The hardness of the blade that has been carefully hardened is approximately HRC60. The material is special tool steel that h... Read More
    Handle  Plastic coating 
    from S$48.99
    Min. 2 days
  7. micro Tongs (sharp pont type )
    KEIBA micro Tongs (sharp pont type )
    Flat processing suitable for processing beads and accessories For bending and grasping work
    Size (mm)  150  Dimension A (mm)  153  Overall Length (mm)  153  Dimension B (mm)  32  Dimension C (mm)  38  Dimension D (mm)  7.5  Mass (g)  70  Trusco Part No.  760-8331  RoHS directive (corresponding to 10 substances)  Correspondence  Spring  Included  Material  MARUTOLOYⅡ 
    Rating:
    80%
    from S$24.99
    Min. 2 days
  8. Tong Plier, with Rubber Grip & Nylon Cover
    ANEX Tong Plier, with Rubber Grip & Nylon Cover
    Yatko with a wire-friendly nylon cover. You can work without damaging the wire. It is suitable for bending the wire at a right angle or sandwiching and fixing it. The grip and spring are made of hand-friendly elastomer resin to open and close with a soft feel.
    Material  Stainless steel SUS410  Mass (g)  70  Trusco Part No.  493-6515  Size  Standard type 120mm 
    Rating:
    47%
    from S$26.99
    Min. 2 days
  9. Carpenter's Pliers, Round
    MORIMITSU Carpenter's Pliers, Round
    Type  Flat type  Tip Width (mm)  Material  S45C  Working dimension (mm)  38 
    from S$33.99
    Min. 2 days
  10. Carpenter's Pliers, with Rubber Grip
    ANEX Carpenter's Pliers, with Rubber Grip
    A dedicated pin bending tool that allows easy bending of 9-pin and T-pin. The grip and spring are made of hand-friendly elastomer resin to open and close with a soft feel.
    Trusco Part No.  856-8989  Size  Pin bending type 135mm  Material  Stainless steel SUS410  Mass (g)  50 
    Rating:
    100%
    from S$24.99
    Min. 2 days
  11. micro Tongs (flat connection type )
    KEIBA micro Tongs (flat connection type )
    Flat processing suitable for processing beads and accessories For bending and grasping work
    Size (mm)  150  Dimension A (mm)  153  Overall Length (mm)  153  Dimension B (mm)  32  Dimension C (mm)  38  Dimension D (mm)  7.5  Mass (g)  70  Trusco Part No.  760-8349  RoHS directive (corresponding to 10 substances)  Correspondence  Spring  Included  Material  MARUTOLOYⅡ 
    Rating:
    80%
    from S$29.99
    Min. 2 days
  12. Tongs (Round shape )
    MORIMITSU Tongs (Round shape )
    For rounding wires, piano wires, etc.
    from S$46.99
    Min. 2 days
  13. Carpenter's Pliers, with Rubber Grip
    ANEX Carpenter's Pliers, with Rubber Grip
    It is used for bending thin plates and crushing caulking. Also suitable for brazing work. The grip and spring are made of hand-friendly elastomer resin to open and close with a soft feel.
    Trusco Part No.  856-8987  Mass (g)  50  Material  Stainless steel SUS410  Size  140mm flat 
    Rating:
    100%
    from S$22.99
    Min. 2 days
  14. Carpenter's Pliers, Round
    MORIMITSU Carpenter's Pliers, Round
    Working dimension (mm)  38  Tip Width (mm)  Type  Round type  Material  S45C 
    from S$36.99
    Min. 2 days
  15. Firework Pliers, Round Tip
    MORIMITSU Firework Pliers, Round Tip
    from S$75.99
    Min. 2 days
  16. Watch Pliers (Ultra Thin Tip)
    Harp Watch Pliers (Ultra Thin Tip)
    Extra-fine tip type. It is a material that does not rust easily. Precision parts assembly / maintenance, precision model / prototype production, watches, metal engraving, and general handicrafts. * Because it is a precision tool, it is not possible to apply a large force.
    Material  13% chrome stainless  Tip Shape  Square bar 
    Rating:
    100%
    from S$29.99
    Min. 2 days
  17. Stainless Steel Tongs pc round type
    TRUSCO Stainless Steel Tongs pc round type
    There is no knurling on the grip and it does not hurt the opponent. Work to bend or crush boards and wires.
    Shape  Katamaru  Material / Finish  SUS410 
    from S$16.99
    Min. 2 days
  18. Micro Pliers (Flat Bent Tip)
    KEIBA Micro Pliers (Flat Bent Tip)
    Flat processing suitable for processing beads and accessories For bending and grasping work
    Size (mm)  150  Overall Length (mm)  150  Dimension A (mm)  150  Dimension B (mm)  29  Dimension C (mm)  38  Dimension E (mm)  40  Dimension D (mm)  7.5  Mass (g)  70  RoHS directive (corresponding to 10 substances)  Correspondence  Spring  Included  Material  MARUTOLOYⅡ 
    from S$29.99
    Min. 2 days
  19. Carpenter's Pliers, with Rubber Grip & Nylon Cover
    ANEX Carpenter's Pliers, with Rubber Grip & Nylon Cover
    Yatko with a wire-friendly nylon cover. You can work without damaging the wire. Suitable for bending the wire into a round shape. The grip and spring are made of hand-friendly elastomer resin to open and close with a soft feel.
    Material  Stainless steel SUS410  Size  Double round type 120mm  Mass (g)  65  Trusco Part No.  828-0670 
    from S$26.99
    Min. 2 days
  20. Carpenter's Pliers, with Rubber Grip & Nylon Cover
    ANEX Carpenter's Pliers, with Rubber Grip & Nylon Cover
    Yatko with a wire-friendly nylon cover. You can work without damaging the wire. The wire can be bent into a square or round shape, or sandwiched and fixed. The grip and spring are made of hand-friendly elastomer resin to open and close with a soft feel.
    Material  Stainless steel SUS410  Trusco Part No.  828-0669  Mass (g)  70  Size  One round type 120mm 
    from S$26.99
    Min. 2 days
  21. Precision Carpenter's Pliers for Crimping, with Rubber Grip
    ANEX Precision Carpenter's Pliers for Crimping, with Rubber Grip
    A special tool that can crimp fasteners such as leather straps. The grip and spring are made of hand-friendly elastomer resin to open and close with a soft feel.
    Size  160mm  Material  Stainless steel SUS410  Mass (g)  67  Trusco Part No.  856-8988 
    Rating:
    60%
    from S$39.99
    Min. 2 days
  22. Stainless Steel Tongs round double end type
    TRUSCO Stainless Steel Tongs round double end type
    There is no knurling on the grip and it does not hurt the opponent. Work to bend or crush boards and wires.
    Material / Finish  SUS410  Mass (g)  36  Shape  Both circles  Size (mm)  120  Overall Length (mm)  120  Trusco Part No.  270-8957 
    Rating:
    100%
    from S$17.99
    Min. 2 days
  23. MERRY Carpenter's Pliers 225mm
    MUROMOTO TEKKO MERRY Carpenter's Pliers 225mm
    Trusco Part No.  853-4463  Overall Length (mm)  225 
    from S$66.99
    Min. 4 days
  24. Carpenter's Pliers, Stainless Steel
    MINESHIMA Carpenter's Pliers, Stainless Steel
    Suitable for detailed work such as grasping and pinching. Made of stainless steel that does not rust easily.
    Overall Length (mm)  120 
    from S$15.99
    Min. 7 days
  25. MERRY Carpenter's Pliers 185mm
    MUROMOTO TEKKO MERRY Carpenter's Pliers 185mm
    Trusco Part No.  853-4462  Overall Length (mm)  185 
    from S$58.99
    Min. 4 days
  26. Pliers for Small Parts
    KIYOKUNI Pliers for Small Parts
    With a grip, it is hard to slip and easy to grip. For holding and pulling out small parts.
    Overall Length (mm)  120  Mass (g)  60 
    from S$13.99
    Min. 6 days
  27. Pliers for Watch Repair
    KIYOKUNI Pliers for Watch Repair
    With a grip, it is hard to slip and easy to grip. For holding and pulling out small parts.
    Overall Length (mm)  120  Mass (g)  60 
    from S$12.99
    Min. 6 days
  28. Yattoko Migaki Shear Plier
    Tanya No Waza Yattoko Migaki Shear Plier
    Since the cutting edge is flat, it is ideal for bending iron plates and strips. For work such as wire.
    Overall Length (mm)  155  Mass (g)  90 
    from S$27.99
    Min. 6 days
  29. Tongs
    BAHCO Tongs
    from S$299.90
    Min. 5 days
  30. precision Benders Tongs
    ALFA MIRAGE precision Benders Tongs
    Bender Yatco is useful when you want to bend and process thin plates.
    from S$29.99
    Min. 6 days
  31. Yadoko Hiraguchi Plier
    Fujimitsu Yadoko Hiraguchi Plier
    Small chopsticks for metal processing and forging. For pinching and bending work.
    Tip Width (mm)  10  Overall Length (mm)  240  Mass (g)  285 
    from S$46.99
    Min. 6 days
  32. Circlip Pliers
    Tanya No Waza Circlip Pliers
    For pinching, bending, and squeezing sheet metal. It can be used for various purposes such as drawing sheet metal and processing decorations. For sheet metal work.
    from S$58.99
    Min. 2 days
  33. Blacksmith Tong
    Near Blacksmith Tong
    Blacksmith Tools-Used when grabbing an object that is being heated (quenched) in the fire during the forging process. For work to grab flat or plate-shaped objects. For fire making work.
    from S$99.90
    Min. 6 days
  34. Blacksmith Tong
    Near Blacksmith Tong
    Blacksmith Tools-Used when grabbing an object that is being heated (quenched) in the fire during the forging process. Grab a rod-shaped, curved, or rounded object. For fire making work.
    from S$58.99
    Min. 6 days
  35. Yadoko  Maruguchi
    Fujimitsu Yadoko Maruguchi
    Small chopsticks for metal processing and forging. For pinching and bending work.
    Tip Width (mm)  10  Overall Length (mm)  240  Mass (g)  275 
    from S$46.99
    Min. 6 days
  36. Yattoko Migaki Shear Plier
    Tanya No Waza Yattoko Migaki Shear Plier
    Since the cutting edge is flat, it is ideal for bending iron plates and strips. For work such as wire.
    from S$29.99
    Min. 2 days
  37. Pliers Flat Mouth
    KIYOKUNI Pliers Flat Mouth
    With a grip, it is hard to slip and easy to grip. For bending and crushing boards and wires.
    Mass (g)  120  Overall Length (mm)  150 
    Rating:
    100%
    from S$12.99
    Min. 6 days
  38. Merry Powerful Yatco PK240
    MUROMOTO TEKKO Merry Powerful Yatco PK240
    Discontinued
  39. Yatco for watch
    TOP KOGYO Yatco for watch
    Suitable for holding and pulling out small parts.
    Discontinued
View : Grid List
Filter

Items 1 - 40 of 46

Set Ascending Direction