Riveters

A set of hand riveters and frequently used blind rivets. Bonding of iron plate / aluminum / resin square pipes, L-shaped materials and plate materials. Can join thin materials that do not break threads. * Do not use for anything other than its intended purpose.

A two-handed riveter that can be used widely from Φ2.4 to Φ6.4 mm. The crimped shaft is discharged to the case of the main body. For caulking from Φ2.4 to Φ6.4 mm * Do not use for any other purpose. * Be sure to read the instruction manual before use. * Please note that rivets are not included. *... Read More

The soft grip handle is designed to be easy to grip, making it easy to cut even strong blind rivets. Φ4.8mm is NSS, NST not possible HR 002 A Horizontal type

4 sizes of rivets can be fastened by replacing the nose piece. For fastening blind rivets

A set of hand rivets and blind rivets that are ideal for rivets.

It is now easy to use at home for a little riveting work. * Please wear protective goggles when working.

A representative product of hand rivetta, which has excellent durability and ease of use. With a long nose piece, you can rivet even in narrow grooves. For fastening members and base materials with rivets.

The crimping work of the 4.8 mm iron rivet, which was difficult to crimp with the conventional manual riveter, has become easier.

Since it is a rotary head, it can be used at various angles.

Comes with a rivet holding function that prevents the rivet from falling even if you do not hold it. Φ4 .8 mm is NS, NSS , NST Impossible HR 002 Z HR 002 D Horizontal type, HR 001 Vertical type

Set for plastic rivets

Convenient for fixing various metals together! For fixing metals for blind rivets. Bonding of iron plate / aluminum / resin square pipes, L-shaped materials and plate materials. It is possible to join thin materials that do not cut screws. Repair of bicycles and electric appliances Installation o... Read More

A set of hand riveter and blind rivet. Comes with a metal case that is convenient for carrying on-site. * Please wear protective goggles when working. Please consider the construction conditions carefully.

It is a strong type and can be easily cut even with strong rivets. Blind rivet Φ4.0, 4.8mm dedicated model, lightweight and easy to use, with minimum and maximum power, ideal for work at construction sites. Great for using stainless steel rivets (NSS / NST).

Light and strong type with aluminum body

You can work easily with the booster mechanism * This is a special tool for aluminum caulking nuts. Do not use it for anything other than its intended purpose.

A standard type hand riveter. For crimping blind rivets.

A two-handed type riveter. Recommended for rivets of 4.8 mm or less. For caulking board anchor rivets.

Folding the bellows makes it easier to store. Recommended for rivets of 4.8 mm or more. For caulking board anchor rivets.

Uses high-grade spring steel. A bush type that drills holes in stacked sheets. For the aviation industry

Uses high-grade spring steel. It is a bush type that drills holes in the stacked sheets, but the pilot is reversed. For the aviation industry

You can crimp the nut on a thin plate that cannot be tapped or on the back side where you cannot reach it.

Since the head part has a structure that rotates 360 °, you can switch between vertical, horizontal, and naname use with a single touch. * Cannot be used for stainless steel rivets 4, 4.8 mm

With nose piece The nose piece is color coded to identify the size.

Can be used for rivets that require strong crimping. The special internal structure softens the impact during riveting (joining). Jaws can be easily replaced using the included tool. Riveting of Φ4.0 to 6.4mm (up to Φ4.8mm for stainless steel) is possible. The mandrel discharged after work is sto... Read More

A pistol grip type rivet gun that achieves high levels of power, controllability, and durability. Parts compatible with Chicago Pneumatic's "X" series. Comes with a beehive type retaining spring and airflow control valve. For aircraft MRO

Since the head rotates 360 degrees, it can be used at various angles. The ergonomic design makes it easy to grip and cut rivets easily. There is a rivet size confirmation hole on the back of the handle to prevent the use of rivets of the wrong size. For riveting members and base materials.

The ergonomic design makes it easy to grip and cut rivets easily. There is a rivet size confirmation hole on the back of the handle to prevent the use of rivets of the wrong size. For riveting members and base materials.

The structure allows the head to move freely 360° and can be set vertically, horizontally, diagonally, etc. For fastening blind rivets

This is a replacement nose piece. The model number is stamped on the body of the part for identification. For fastening with rivets.

The handle is made of forged chrome vanadium steel for durability. Jaws can be easily replaced by using the attached tool. With a thin tip width of 25 mm, riveting work in narrow spaces is also possible. Riveting of Φ3.0 to 5.0mm (up to Φ4.0mm for steel and stainless steel) is possible. The handl... Read More

It has both riveter and nutter functions. It reduces the burden of about 40% compared to the conventional handle type (compared to the company). Because it is a gun type, rivet fastening (joining) is possible just by gripping it with one hand. A rivet with a ratchet structure. Jaws can be easily ... Read More