Pullers (Separators)
A puller is a special tool for pulling things. It is an indispensable tool for car maintenance. Suitable for pulling out small diameter bearings for automobiles and home appliances. A general-purpose puller with two or three claws, a bearing puller that can handle round shapes such as bearings, a bolt type puller that hooks bolts instead of claws, a tie rod end of a steering rack, and a ball of a lower arm There is a ball joint puller that can be used to remove the joint.
Other Related Pages
MonotaRO Gear puller 3 clawsIt is used to pull out gears and pulleys. * Do not use for anything other than its intended purpose.Material Chrome vanadium- MonotaRO Bearing Puller Strong TypeStrong type for professionals. When the bearing is small, it can be adjusted by tightening the screw. For removing small diameter bearings for power tools and wheels. * Do not use for anything other than its intended purpose.Material CRV
- MonotaRO Gear puller* Do not use for anything other than its intended purpose.Material Chrome vanadium Hook Type 2 claw
- SUPER TOOL Gear Puller G TypeExpands the reach of the claws by making the claw holes 2 holes. The adapter with steel balls greatly reduces frictional resistance.Hook Type 2 claw
- MonotaRO Gear Puller 3 Size SetBy using carbon steel as the material, it became a bargain price. It is a set product of a size that is frequently used. * Not sold separatelySet Contents 75mm ・ 100mm ・ 150mm each one Material Carbon steel Load Capacity (kN) (75mm)8.82 (100mm)11.76 (150mm)17.64
- SUPER TOOL Armature Bearing PullerIdeal for pulling out small-diameter bearings installed in power tools, home appliances, automobiles, etc.
- SUPER TOOL Gear Puller GL (Strong Type For Professional Use)Ideal for pulling out bearings, pulleys, gears, etc. in the dismantling and repair of machines and automobiles. It is especially suitable for pulling out gears and pulleys in deep places.Hook Type Long claw
- SUPER TOOL Steel ball adapter for gear pullerSpecification With retaining ring
-
- TOP KOGYO 3-jaw gear pullerA pulley pulling tool that exerts an average pulling force on three points. GP3-100 and GP3-150 are very convenient because they can be used as two-claw or three-claw depending on the place of use. It boasts excellent durability due to careful processing and perfect heat treatment. Pulley pulling... Read More
-
- SUPER TOOL Sliding Gear Puller (Thin Jaw Long Type)A dedicated tool for pulling out gears, pulleys and bearings. Since the claws slide in parallel, it is effective for work in narrow spaces. It can be used for both outer and inner hooks just by resetting the claws. It is a thin nail type.
-
- SUPER TOOL Slide Gear Puller (Thin Jaw Type)A dedicated tool for pulling out gears, pulleys and bearings. Since the claws slide in parallel, it is effective for work in narrow spaces. It can be used for both outer and inner hooks just by resetting the claws. It is a thin nail type.
- ARM SANGYO Gear Puller 3-JawA 3-claw type that works with an average pulling force on 3 points to prevent cracking and deformation. The claws are forged from special steel, and the set screws are rolled screws for sufficient strength and durability. By attaching the claws in the opposite direction, it is possible to handle ... Read More
- SUPER TOOL Bearing SeparatorA type that alternately tightens the nuts of both male screws. The G / GL type is ideal for pulling out bearings and gears that do not have gaps for claws.
- SUPER TOOL Gear puller (slide type)The slide claw is fixed with a knob screw to prevent the claw from escaping under load. By changing the direction of the claws, it is possible to work inside. It can be used in places with few gaps by replacing it with thin claws (option). The male thread is a trapezoidal thread. The tip of the a... Read More
-
- SUPER TOOL G type Gapula G-4The slide claw is fixed with a knob screw to prevent the claw from escaping under load. By changing the direction of the claws, it is possible to work inside. It can be used in places with few gaps by replacing it with thin claws (option). The male thread is a trapezoidal thread. The tip of the a... Read MoreMaterial Special steel (SCM435) Type Long nails
-
-
- ESCO 270mm [Medium] Flexible Packing HookMaterial Steel spring Wire Diameter (Φmm) 2.5 Corkscrew Diameter (Φmm) 8from S$59.99Min. 2 days
- SUPER TOOL Stepped / Auxiliary Adapter (Shock Speed Puller)Material Special steel
- SUPER TOOL Bearing Puller Set Parts (Inner Jaw)* Bearing puller slide handle BPH6 (sold separately) is also required.
- ESCO 4.4x180mm Packing hook (flexible)Shank Diameter (Φmm) 2.4 Diameter (Φmm) 4.4 (spiral)from S$36.99Min. 2 days
- TRUSCO Gear puller (2-claw type)Ideal for pulling out bearings, pulleys, gears, etc. in the dismantling and repair of machines and automobiles. A dedicated tool for pulling out gears and pulleys.
- Simatool Bearing installation toolA special nylon hammer softens the impact and protects the bearing. Three types of impact sleeves made of materials with strong impact resistance. Supports bearings with an inner diameter of 10 to 50 mm with 33 types of impact rings. It can also be used to attach oil seals. The FT33 consists of 3... Read MoreApplicable bearing inner diameter (Φmm) 10～50 RoHS directive (corresponding to 10 substances) Correspondence
- TRUSCO Gear puller (3-claw type)Ideal for pulling out bearings, pulleys, gears, etc. in the dismantling and repair of machines and automobiles. It is a 3-claw type.
- Ko-Ken (Yamashita Industrial Lab) Stud pullerMaterial Chrome molybdenum steel RoHS directive (corresponding to 10 substances) Correspondence
- TRUSCO Sliding Gear PullerThe parallel movement of the claws enables smooth work, leading to increased efficiency. * Do not use for internal hanging work by changing the direction of the claws.
- SUPER TOOL Super sliding ultra-thin claw gear puller (long type)Ideal for pulling out pulleys and gears with a small gap for hooking claws. The thickness of the tip of the nail is 2 mm, which is an ultra-thin nail, so it is easy to enter even small gaps. The claws can be slid left and right and fixed in place with cap bolts.Mass (g) 700 Breaking Load (kN) 25
- SUPER TOOL Inner claw (bearing puller set parts)Material Special steel
- SUPER TOOL Bearing Puller / Puller Set (for Inner Bearing Race)A special tool for pulling out the inner ring of bearings. Chuck the inner claw to the inner diameter of the bearing and set it on the stand. After that, turn the nut to remove the bearing. The maximum reach of the nail is 150 mm.from S$369.90Min. 2 days
-
- SUPER TOOL Gear Puller GT Type (3 Jaw Dedicated Type)Since it has 3 claws (strong type), it is easier to set on the work. Ideal for pulling out bearings, pulleys, gears, etc. in the dismantling and repair of machines and automobiles.Material Special alloy steel Finish Nickel chrome plating
- SUPER TOOL Sliding ultra thin nail gap pullerIdeal for pulling out pulleys and gears with a small gap for hooking claws. The claws are slide type and fixed in appropriate positions with cap bolts.Material / Finish Special alloy steel / black dyeing Mass (g) 600
-
- No Brand Ratchet type gear pullerWith this gear puller, the claws and body can be attached and detached with a single touch. Furthermore, since the base of the claw is shaped like a cone and the main body mounting part is a leaf spring, the angle of the claw can be held according to the object. Until now, gear pullers tended to ... Read More
- ESCO 3-pack packing hook (flexible)Set Contents EA566AJ-2、EA566AJ-3、EA566AJ-4from S$129.90Min. 2 days
- ESCO Packing Tool 9pcs Set* Please note that some products may have some rust.from S$299.90Min. 3 days
![270mm [Medium] Flexible Packing Hook](https://jp.images-monotaro.com/Monotaro3/pi/middle/mono03493025-130416-02.jpg)
