All Category

Bearing Pullers

A bearing puller is a dedicated tool for pulling out bearings on bicycle and motorcycle wheels and rotating tools. If the bearing that controls the rotation can be replaced, the rotational force is restored, so it is cheaper than changing the entire tire. Some can be adjusted and gripped even with small bearings, and others can only be used for fixed sizes. Since the bearing puller is used in a fixed manner, be sure to look carefully at how to fix the outer nails.
View : Grid List
Filter

Items 1 - 40 of 90

Set Ascending Direction
  1. Bearing Puller Strong Type
    MonotaRO Bearing Puller Strong Type
    Strong type for professionals. When the bearing is small, it can be adjusted by tightening the screw. For removing small diameter bearings for power tools and wheels. * Do not use for anything other than its intended purpose.
    Material  CRV 
    Rating:
    83%
    from S$33.99
    Min. 2 days
  2. Armature Bearing Puller
    SUPER TOOL Armature Bearing Puller
    Ideal for pulling out small-diameter bearings installed in power tools, home appliances, automobiles, etc.
    Specification  With speed knob for quick fastening 
    Rating:
    94%
    from S$49.99
    Min. 2 days
  3. Bearing installation tool
    Simatool Bearing installation tool
    A special nylon hammer softens the impact and protects the bearing. Three types of impact sleeves made of materials with strong impact resistance. Supports bearings with an inner diameter of 10 to 50 mm with 33 types of impact rings. It can also be used to attach oil seals. The FT33 consists of 3... Read More
    Applicable bearing inner diameter (Φmm)  10~50  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    100%
    from S$1,899.00
    Min. 2 days
  4. Bearing Puller / Puller Set (for Inner Bearing Race)
    SUPER TOOL Bearing Puller / Puller Set (for Inner Bearing Race)
    A special tool for pulling out the inner ring of bearings. Chuck the inner claw to the inner diameter of the bearing and set it on the stand. After that, turn the nut to remove the bearing. The maximum reach of the nail is 150 mm.
    from S$339.90
    Min. 2 days
  5. Armature Bearing Puller
    KTC Armature Bearing Puller
    Rating:
    100%
    from S$199.90
    Min. 2 days
  6. Bearing / Grip Puller Set
    SUPER TOOL Bearing / Grip Puller Set
    Ideal for pulling out bearings and gears without gaps. A puller set that is ideal for pulling out pulleys with large diameters.
    from S$359.90
    Min. 2 days
  7. Bearing removal tool
    Simatool Bearing removal tool
    A new structure that locks the arm between the inner and outer rings of the bearing makes it easy to remove the ball bearing built in between the housing and the shaft. Made in Switzerland with high strength and high quality. Compatible with ball bearings with an inner diameter of 10 to 100 mm. L... Read More
    Applicable bearing inner diameter (Φmm)  (Ball) 10-100  Mass (kg)  3.2  Compatible Bearing  6000~6020、6200~6217、6300~6313、6403~6410  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    100%
    from S$2,299.00
    Min. 2 days
  8. Slide hammer bearing puller set
    SUPER TOOL Slide hammer bearing puller set
    A special tool for pulling out the inner ring of bearings.
    Trusco Part No.  108-4968  Mass (kg)  4.5 
    Rating:
    100%
    from S$999.00
    Min. 2 days
  9. Internal extractor
    HAZET Internal extractor
    A tool for inserting and pulling out wedges from the inside of bearings. Used in combination with the counter stay. Automobile maintenance, industrial machinery
    Material  Chrome vanadium steel jaws 
    from S$219.90
    Min. 7 days
  10. Slide hammer
    HAZET Slide hammer
    A slide hammer that can be used for internal extractors with M10 mm connection. When using 1788N-15 to 35, 1788T-16 stud bolt adapter is required. Automobile maintenance, industrial machinery
    Mass (g)  (Slide) 200  Overall Length (mm)  226  Trusco Part No.  859-3991  Material  Chromium vanadium steel  Connector Thread  M10 
    from S$119.90
    Min. 2 days
  11. TOP Alternator bearing
    TOP KOGYO TOP Alternator bearing
    The claws and middle plate are forged products, and all parts have been heat-treated for excellent durability. For alternator bearing replacement work from light vehicles to large dump trucks
    Operating range outer diameter (Φmm)  32~52  Trusco Part No.  369-0016  Mass (g)  670  Jaw Reach (mm)  70  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$139.90
    Min. 2 days
  12. V belt (with rib) pulley adapter
    HAZET V belt (with rib) pulley adapter
    It is a retainer adapter for the generator pulley of an automobile. Fix the pulley with this adapter and a 17mm spanner, and assemble and remove the mounting bolts. Car
    Outer Diameter (Φmm)  (Serration) 19.6  Drive size  17mm  Overall Length (mm)  30  Mass (g)  36  Trusco Part No.  859-4085  Material  Chromium vanadium steel 
    from S$66.99
    Min. 2 days
  13. Body (bearing / push puller set parts)
    SUPER TOOL Body (bearing / push puller set parts)
    Parts for push puller set.
    Material  Special steel 
    from S$159.90
    Min. 7 days
  14. Bearing insertion tool set
    SUPER TOOL Bearing insertion tool set
    A tool for inserting bearings into shafts and housings. You can work quickly just by selecting a top that matches the bearing and incorporating it into the main body. The inner ring and outer ring of the bearing can be inserted by applying force at the same time. Bearings can be inserted into the... Read More
    Applicable bearing inner diameter (Φmm)  10~50  Mass (kg)  15 (including case)  Applicable bearing outer diameter (Φmm)  26~110  Outer Dimensions (mm)  Case: 445 x 380 x 120 
    from S$1,499.00
    Min. 5 days
  15. Miniature bearline puller set
    TOP KOGYO Miniature bearline puller set
    A tool set ideal for removing bearings in tight spaces. Ideal for removing bearings in tight spaces.
    Mass (kg)  2.5  Trusco Part No.  369-1918  Jaw Reach (mm)  30 
    from S$469.90
    Min. 3 days
  16. Stud bolt adapter set
    HAZET Stud bolt adapter set
    Mass (g)  210  Material  Special steel  Trusco Part No.  859-3992 
    from S$249.90
    Min. 48 days
  17. Bearing insertion tool set
    SUPER TOOL Bearing insertion tool set
    A tool for inserting bearings into the housing. You can work quickly just by selecting the outer ring top that matches the bearing and incorporating it into the striking shaft. Only the outer ring of the bearing can be inserted by applying force. Since the inner ring of the bearing can be used as... Read More
    Applicable bearing inner diameter (Φmm)  17~50  Applicable bearing outer diameter (Φmm)  26~75  Mass (kg)  6.5 (including case)  Outer Dimensions (mm)  Case: 520 x 265 x 90 
    from S$599.90
    Min. 4 days
  18. Ball joint puller
    HAZET Ball joint puller
    It is a general ball joint puller (pitman puller). Joe is ruggedly made. Car maintenance
    Material  Chrome vanadium steel jaws 
    from S$159.90
    Min. 62 days
  19. Bearing push puller set (strong type for professional use)
    SUPER TOOL Bearing push puller set (strong type for professional use)
    A puller set that is ideal for pushing in and pulling out bearings, gears, pulleys, etc. that are deep in depth. For pulling out work with narrow gaps.
    from S$769.90
    Min. 3 days
  20. Bearing Puller Set
    SUPER TOOL Bearing Puller Set
    Tool set for pulling out inner and outer rings of bearings. Comes in a steel case.
    Trusco Part No.  108-5531  Mass (kg)  14 
    from S$2,799.00
    Min. 2 days
  21. Hex Nut for Male Thread (Bearing Push Puller Set Parts)
    SUPER TOOL Hex Nut for Male Thread (Bearing Push Puller Set Parts)
    Parts for push puller set.
    Material  Special steel 
    from S$16.99
    Min. 4 days
  22. Stud bolts (bearing / push puller set parts)
    SUPER TOOL Stud bolts (bearing / push puller set parts)
    Parts for push puller set.
    Material  Special steel 
    from S$29.99
    Min. 16 days
  23. Counter stay for internal extractor
    HAZET Counter stay for internal extractor
    Trusco Part No.  859-3986  Material  Chrome vanadium steel jaws  Specification  1788N-45-55 only  Mass (kg)  1.65 
    from S$439.90
    Min. 7 days
  24. Counter stay for internal extractor
    HAZET Counter stay for internal extractor
    Mass (g)  750  Trusco Part No.  859-3990  Material  Chrome vanadium steel jaws  Specification  1788N-12-35 only 
    from S$299.90
    Min. 7 days
  25. 2-arm bearing puller
    KUKKO 2-arm bearing puller
    A 2-arm bearing puller with a simple structure.
    from S$279.90
    Min. 4 days
  26. Ball joint puller
    HAZET Ball joint puller
    A puller for removing the ball joint pivot. You can work with a small force by the action of the lever. Car maintenance
    Material  Chrome vanadium steel jaws 
    Rating:
    100%
    from S$329.90
    Min. 7 days
  27. Washer for stud bolt (bearing / push puller set parts)
    SUPER TOOL Washer for stud bolt (bearing / push puller set parts)
    Parts for push puller set.
    Material  Special steel 
    from S$6.19
    Min. 5 days
  28. Bearing inner ring puller
    SKF Bearing inner ring puller
    The SKF inner ring pull-out puller kit is a tool for pulling out bearings that are attached to the housing with outer ring clasps. The puller has optimum strength and durability and supports a wide range of bearing inner diameters. The slide hammer, which generates a high impact force, is designe... Read More
    Case Dimensions (mm)  530×85×180  Bore Diameter (Φmm)  7~28  Mass (kg)  About 3.1  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$999.00
    Min. 46 days
  29. 90mm bearing puller
    ESCO 90mm bearing puller
    Esco Part No.  EA500BP-90 
    from S$329.90
    Min. 4 days
  30. 2 arm pitman puller
    HAZET 2 arm pitman puller
    A small puller for ball bearings and gears. Use the press screw on the arm to bite the jaw deeply. Automobile maintenance, industrial machinery
    Material  Chrome vanadium steel jaws 
    from S$589.90
    Min. 62 days
  31. PULLPO ball bearing puller set
    KUKKO PULLPO ball bearing puller set
    Grooved ball bearings Can be pulled out without damaging the bearings and without removing the shaft. Hook the claw from the inside to the race of the outer ring of the grooved bearing and pull it out. The special shoulder design makes it easy to assemble and attach to bearings. The special shoul... Read More
    from S$1,699.00
    Min. 4 days
  32. Coupling nut (bearing / push puller set parts)
    SUPER TOOL Coupling nut (bearing / push puller set parts)
    Material  Special steel 
    from S$8.99
    Min. 4 days
  33. Internal extractor set
    HAZET Internal extractor set
    Four types of extractors are available for bearings with an inner diameter of 5 mm to 35 mm. The surface has excellent wear resistance due to the underground titanium coating. Automobile maintenance, industrial machinery
    Material  Chrome vanadium steel jaws  Applicable bearing inner diameter (Φmm)  8.5~36  Mass (kg)  1.16  Trusco Part No.  859-3993 
    from S$1,599.00
    Min. 62 days
  34. 110mm internal bearing puller
    ESCO 110mm internal bearing puller
    Esco Part No.  EA510D-110 
    from S$3,399.00
    Min. 4 days
  35. Inner lace puller set
    KOTO Inner lace puller set
    It is a dedicated inner lace puller set for Hiace 200 series and Caravan E25 / E26 series. After disassembling the front hub, the inner race of the hub bearing can be removed with a special separator. Since the separator fits perfectly with the color shape, it can be pulled out evenly. Special to... Read More
    from S$1,299.00
    Min. 4 days
  36. Pulley extractor set
    HAZET Pulley extractor set
    Square Drive (mm)  12.7  Overall Length  140mm  Mass (g)  173  Trusco Part No.  859-4087  Material  Chromium vanadium steel  Specification  XZN M10 
    from S$159.90
    Min. 62 days
  37. Fitting tool
    SKF Fitting tool
    Improper installation, such as applying excessive force, accounts for 16% of early bearing failures. The SKF Bearing Built-in Tool Set is designed for quick and accurate mounting of bearings while minimizing the risk of bearing damage. By properly combining the impact ring and sleeve, the pushing... Read More
    Inner Diameter (Φmm)  10~50  Outer Diameter (Φmm)  26~120  Mass (kg)  4.4 (including carry case), hammer: 0.9  Case Dimensions (mm)  530×110×360  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$1,999.00
    Min. 6 days
  38. Ball joint puller hydraulic
    HAZET Ball joint puller hydraulic
    A puller for removing the ball joint pivot. You can work with a small force by the action of the lever. You can work with less force by hydraulic operation. Car maintenance
    Material  Chrome vanadium steel jaws 
    from S$1,499.00
    Min. 62 days
  39. 14mm diameter bearing extractor
    ESCO 14mm diameter bearing extractor
    from S$159.90
    Min. 4 days
  40. Hydraulic bearing puller set
    KUKKO Hydraulic bearing puller set
    Hydraulic bearing puller set
    Height (mm)  500 
    from S$2,499.00
    Min. 4 days
View : Grid List
Filter

Items 1 - 40 of 90

Set Ascending Direction