All Category

Hand Saws Related

View : Grid List
Filter

Items 1 - 40 of 73

Set Ascending Direction
  1. Saw Guide with Magnet
    KENOH Saw Guide with Magnet
    Do-it-yourself essentials! First of all, it cuts straight and clean! The magnet attracts the saw blade and cuts without blurring. The angle can be adjusted in 15 ° increments, enabling accurate angle cutting.
    Overall Length (mm)  170  Mass (g)  205 
    from S$15.99
    Min. 2 days
  2. Angle cutting saw guide
    E-SPF Angle cutting saw guide
    A saw that pushes straight and cleanly. The angle can be adjusted by 90 °, 75 °, 67.5 °, 60 °, 54 ° and 45 °, and by fixing the wood and the pedestal, it is easy to cut and can be cut neatly. The cut end is clean with a specially designed saw blade. Ideal for cutting 1x4 and 2x4 materials. * A se... Read More
    Blade Thickness (mm)  0.6  Blade Length (mm)  300  Mass (g)  About 1430  Dimension (mm)  About 520 × 285 × 240  Material  Blade / Cutting steel SK85 
    Rating:
    40%
    from S$85.99
    Min. 5 days
  3. Life saw guide gauge
    Okada Hardware Mfg. (Z-Saw) Life saw guide gauge
    An angle adjustment protractor for the saw guide series. It is attached to Saw Guide F. It is necessary to set the angle of the saw guide, but you can also injure the angle line on the wood as it is.
    Mass (g)  173  Trusco Part No.  818-5827 
    from S$12.99
    Min. 4 days
  4. Miter box
    STANLEY Miter box
    When cutting wood diagonally, adjust the angle and fix it firmly. Cut with a special saw.
    Replacement Blades  20-809  Dimensions, Width W x Depth D x Height H (mm)  221×700×120  Mass (kg)  3.6  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$399.90
    Min. 7 days
  5. For saw guide 2 × 4
    MonotaRO For saw guide 2 × 4
    You can cut at the correct angle. Can cut 3 patterns of 90, 45 and 22.5 °. It is also perfect for two-by-four wood. For angle cutting of 2x4 and 1x4 wood * Be careful not to cut the main body too much. * For safety, please wear protective equipment while working.
    Mass (g)  330  Cutting Thickness (mm)  40  Overall Length (mm)  290  Cutting width (mm)  90  Overall Width (mm)  126 
    Rating:
    91%
    from S$8.79
    Min. 2 days
  6. All sharpening Taro
    JEFCOM (DENSAN) All sharpening Taro
    All-purpose sharpener that does not require water or oil and can be sharpened on the spot Knives & scissors, etc. Excellent for sharpening any V-shaped blade Knives, scissors, wave blade knives, meat knives, electric knives, grass cutting knives, razor blades, V-shaped blade knives, etc.
    Overall Length (mm)  105  Mass (g)  45  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    87%
    from S$29.99
    Min. 2 days
  7. Guide block
    SK (Niigata Seiki) Guide block
    Since the grooves of 45 ° and 90 ° are cut, the saw can be cut accurately. It is made of plastic with screw holes that can be firmly fixed to a workbench, etc., so it will not damage the blade. For corner cutting such as picture frames, hobbies, and crafts
    Rating:
    90%
    from S$7.59
    Min. 2 days
  8. All sharpening Taro
    JEFCOM (DENSAN) All sharpening Taro
    Compact and lightweight! Portable sharpener that can be sharpened at any time
    RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    80%
    from S$29.99
    Min. 2 days
  9. Guide Saw F Set
    Okada Hardware Mfg. (Z-Saw) Guide Saw F Set
    It is a set product of Saw Guide F and Life Saw 9 inch 265. Anyone can achieve high-precision cutting by using it as a set. The angle of the saw guide F can be freely set within 45 degrees to the left and right and within 45 degrees in the front-back inclination around the right angle. Use the in... Read More
    Trusco Part No.  818-5826  Mass (kg)  1.53 
    Rating:
    83%
    from S$109.90
    Min. 2 days
  10. Saw Guide Best Saw Set
    Okada Hardware Mfg. (Z-Saw) Saw Guide Best Saw Set
    Introducing a new saw guide! SAW GUID BEST in pursuit of ease of use that can be quickly put out and used quickly! Two types of blades, 265 mm and 175 mm (precision), can be used with one unit. Lightweight and compact, making it even more convenient! Lightweight and compact aluminum body. The pos... Read More
    Material  Body: Aluminum 
    Rating:
    100%
    from S$99.90
    Min. 2 days
  11. G-SAW Grip
    Tajima (TJM DESIGN) G-SAW Grip
    You can freely choose the one that suits you. Spare blade type folding saw handle. Elastomer resin grip that grips firmly and is not slippery. With a 2-step stopper that can adjust the blade angle according to the cutting condition. Common pattern for temporary frames and pruning saws
    Material (Grip)  Elastomer resin 
    Rating:
    100%
    from S$12.99
    Min. 3 days
  12. Pistol 265 pattern
    Okada Hardware Mfg. (Z-Saw) Pistol 265 pattern
    Mass (g)  101  Shape  Pistol shape  Trusco Part No.  818-5758 
    Rating:
    97%
    from S$12.99
    Min. 2 days
  13. Janipika
    RAZORSAW (RAZORSAW MANUFACTURING) Janipika
    Easy! Just spray! It is a product that restores the original sharpness by removing the sap (yani, shibu) from blades such as blades that are slippery, open, and have poor sharpness (saws, scissors, sickles, cutting shears). Leather Sawyer Nipika is a cleaner for cutlery. It can be used for all cu... Read More
    RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    100%
    from S$10.99
    Min. 4 days
  14. Paiman pattern
    Okada Hardware Mfg. (Z-Saw) Paiman pattern
    Shape  Pistol shape 
    Rating:
    87%
    from S$9.29
    Min. 2 days
  15. Smart saw grip
    Tajima (TJM DESIGN) Smart saw grip
    Common pattern that you can freely choose the one that suits you For hand grinding work
    Material (Grip)  Elastomer resin  Suitable for  Smart saw blades 
    from S$13.99
    Min. 3 days
  16. Pipe saw 240 red pattern
    Okada Hardware Mfg. (Z-Saw) Pipe saw 240 red pattern
    Mass (g)  83  Shape  Pistol shape  Trusco Part No.  818-5760 
    from S$13.99
    Min. 2 days
  17. 265/8 size pattern
    Okada Hardware Mfg. (Z-Saw) 265/8 size pattern
    Trusco Part No.  818-5752  Mass (g)  99  Shape  Rod shape 
    Rating:
    80%
    from S$18.99
    Min. 2 days
  18. Pipe saw 300 pattern
    Okada Hardware Mfg. (Z-Saw) Pipe saw 300 pattern
    Shape  Pistol shape  Mass (g)  101  Trusco Part No.  818-5764 
    Rating:
    100%
    from S$12.99
    Min. 2 days
  19. Miter box for 2x4
    KENOH Miter box for 2x4
    Do-it-yourself essentials! For angle cutting of 2x4 and 1x4 wood! Cuttable width: Approx. 90 x Thickness Approx. 40 mm Can cut 3 patterns of 90, 45 and 22.5 °
    Mass (g)  329  Overall Length (mm)  298  Cutting Capacity (Thickness x Width)  About 40 × 90 
    from S$13.99
    Min. 2 days
  20. Orange handle for temporary frame 333
    Okada Hardware Mfg. (Z-Saw) Orange handle for temporary frame 333
    The handle is made of elastomer resin (synthetic rubber), so it will not slip even if you hold it with gloves.
    Mass (g)  188  Trusco Part No.  818-5782  Shape  Rod shape 
    from S$21.99
    Min. 2 days
  21. Pipe saw 240 blue pattern
    Okada Hardware Mfg. (Z-Saw) Pipe saw 240 blue pattern
    Mass (g)  83  Trusco Part No.  818-5761  Shape  Pistol shape 
    Rating:
    100%
    from S$13.99
    Min. 2 days
  22. Yanipica refill
    RAZORSAW (RAZORSAW MANUFACTURING) Yanipica refill
    Easy! Just spray! It is a product that restores the original sharpness by removing the sap (yani, shibu) from blades such as blades that are slippery, open, and have poor sharpness (saws, scissors, sickles, cutting shears). Leather Sawyer Nipika is a cleaner for cutlery. It can be used for all cu... Read More
    Capacity (mL)  300  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$18.99
    Min. 4 days
  23. Angle adjustable saw guide
    H&H Angle adjustable saw guide
    Saw guide with magnet capable of accurate angle cutting in units of 15 degrees
    Size (mm)  100×240 
    from S$19.99
    Min. 4 days
  24. Decorasau pattern
    Okada Hardware Mfg. (Z-Saw) Decorasau pattern
    Shape  Rod shape 
    Rating:
    100%
    from S$15.99
    Min. 2 days
  25. Mini Panel Saw with Handle
    Okada Hardware Mfg. (Z-Saw) Mini Panel Saw with Handle
    Shape  Rod shape 
    from S$13.99
    Min. 4 days
  26. Color Handle for Gold Saw
    Tajima (TJM DESIGN) Color Handle for Gold Saw
    Any blade (gold saw blade) can be used because the holder has a large spring tolerance. Hollow special resin winding handle with the elasticity of rubber and the strength and beauty of plastic Saw handle
    Material  Hollow special resin 
    from S$22.99
    Min. 3 days
  27. Angle saw guide replacement blade
    E-SPF Angle saw guide replacement blade
    Dedicated spare blade for "E-SPF Angle Cutting Saw Guide ESPF-7". 420mm long size that makes it easy to cut 1x4 and 2x4 materials. Specially designed reverse sharpening with a beautiful cut.
    Blade Thickness (mm)  0.6  Blade Length (mm)  300  Dimension (mm)  About 420 × 40 × 0.6  Mass (g)  About 70  Material  Blade / Cutting steel SK85 
    from S$29.99
    Min. 5 days
  28. 300 patterns
    Okada Hardware Mfg. (Z-Saw) 300 patterns
    Mass (g)  110  Shape  Rod shape  Trusco Part No.  818-5757 
    Rating:
    100%
    from S$21.99
    Min. 4 days
  29. Spare blade type common grip
    EB-SK11 Spare blade type common grip
    A common grip and gun type for replaceable blade saws. A rotary removable saw blade (blade thickness 0.6 to 0.9 mm) common to all companies can be used. Common grip for replaceable blade saws. * Be sure to use a saw blade that matches the grip. * When replacing the grip, use gloves and be careful... Read More
    Specification  Gun T  Pattern  Gun type resin pattern 
    from S$11.99
    Min. 3 days
  30. Options for Geeso
    Tajima (TJM DESIGN) Options for Geeso
    It is a screw for fixing the blade
    from S$2.79
    Min. 3 days
  31. Panel saw paulownia pattern
    Okada Hardware Mfg. (Z-Saw) Panel saw paulownia pattern
    This paulownia pattern fits in your hand the more you use it. A replacement blade for the panel saw series can be used.
    Dimensions (Width W x Height H) (mm)  32×493  Material  Paulownia 
    from S$22.99
    Min. 4 days
  32. Replaceable blade saw elastomer grip 9th dimension
    SHARK SAW Replaceable blade saw elastomer grip 9th dimension
    Clear coat finish improves rust prevention effect. Sharp sharpness due to the unique blade shape. The sharpness is maintained and long-lasting due to impact quenching. Compact storage in a tool box, etc. by removing the blade. A rubber grip that is non-slip and fits in your hand. For horizontal g... Read More
    Cell Spacing (mm)  (Blade) 1.75  Wall Thickness (mm)  0.6  Groove width (mm)  0.9±0.05  Blade Length (mm)  265  Dimension (mm)  265  Material (Handle)  ABS+TPR  Type  Crank pattern  Material (Blade)  SK5 / Clear coating  Cutting Edge Treatment  Shock hardening 
    from S$15.99
    Min. 5 days
  33. 7 Dimension Handle
    Okada Hardware Mfg. (Z-Saw) 7 Dimension Handle
    Mass (g)  63  Trusco Part No.  818-5806  Shape  Rod shape 
    from S$18.99
    Min. 4 days
  34. Saw guide
    trad Saw guide
    Guide cutter for straight and diagonal cutting For rulers, marking and smearing, free angle setting Prevents burrs, warpage, and burns on the cut edge, and has the sharpness of the saw blade.
    Dimensions (cm)  60  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$29.99
    Min. 4 days
  35. 130mm string saw string
    ESCO 130mm string saw string
    Esco Part No.  EA522VA-7 
    from S$99.90
    Min. 4 days
  36. Spare blade type saw pattern Elastomer grip
    SHARK SAW Spare blade type saw pattern Elastomer grip
    A rubber grip that is non-slip and fits in your hand.
    Material  ABS+TPR 
    from S$9.29
    Min. 3 days
  37. Jeso short straight screw
    Tajima (TJM DESIGN) Jeso short straight screw
    G-SAW short straight screw. G-SAW short straight screw * Product specifications are subject to change without notice. Please note.
    Trusco Part No.  828-6879 
    from S$3.59
    Min. 3 days
  38. 36 beats
    MORIMITSU 36 beats
    We perform bending and crushing of thin iron plates. The work is not easily scratched. Sheet metal processing beating work clapping wood
    Mass (g)  500  Trusco Part No.  853-4394  Length (mm)  360  Type  Standard  Width (mm)  36  Height (mm)  36  Material  Oak 
    from S$24.99
    Min. 5 days
  39. Piranha Miter Saw Box
    PiranhaTool Piranha Miter Saw Box
    Guide role required for precise angle cutting (for PS-0 and PS-1) Even with precision blades, there are concerns about accurate work with freehand. A dedicated guide supports straight and right angle cutting. 90 ° is used when cutting materials at right angles, and 45 ° is used when connecting ma... Read More
    Outer Length (mm)  150  Outer Height (mm)  25  Outer Width (mm)  50  Material  Aluminum material 
    from S$21.99
    Min. 6 days
  40. Twill Weaving (for 3 sheets)
    YAYOI CHEMICAL INDUSTRY Twill Weaving (for 3 sheets)
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$39.99
    Min. 5 days
View : Grid List
Filter

Items 1 - 40 of 73

Set Ascending Direction