All Category

C Channel & M Bar Cutters

C-chan and M-bar cutters refer to work tools for cutting thin mesh material with a cross section resembling the letter C, called a C-shaped mesh, and a base material made of weighing metal for ceilings, respectively. It is used for cutting when matching dimensions on site. Work can be performed without noise, sparks, or dust. In addition to the M&C cutter, which has two roles in one, there is also one that rotates 360 degrees so that the handle does not hit the wall or ceiling, and one that can easily drill holes.
View : Grid List
Filter

35 Item(s)

Set Ascending Direction
  1. Spare blade for M bar cutter
    Marvel Spare blade for M bar cutter
    Suitable for  For MCM-500 
    from S$44.99
    Min. 2 days
  2. C Chang cutter
    Marvel C Chang cutter
    One-shot disconnection
    Mass (kg)  1.69  Overall Length (mm)  500 
    from S$339.90
    Min. 2 days
  3. M bar cutter
    FUJIYA M bar cutter
    Easy to cut lightly! Dedicated cutting tool for M bar "CW-19 (CS-19) plate thickness 0.5 mm or less" Unique blade shape that matches the M bar Uses an aluminum pipe for the clean cut handle unique to Fujiya, and uses a lightweight Fujiya's unique slide lever method for outstanding s... Read More
    Size (mm)  500  Range to Use (mm)  M bar with a thickness of 0.5 or less  Mass (kg)  1.4  Trusco Part No.  327-2231 
    Rating:
    80%
    from S$269.90
    Min. 2 days
  4. C Chang cutter
    FUJIYA C Chang cutter
    One shot without worrying about sparks and power supply !! C-chan "CC-19 (C-38) plate thickness 1.2 mm or less" Unique blade shape that matches C-chan Clean cut edge unique to Fujiya Uses precision-forged special steel for blades Lightweight using aluminum pipe for the handle
    Trusco Part No.  327-2222  Mass (kg)  1.2  Range to Use (mm)  C-chan with a thickness of 1.2 or less  Size (mm)  550 
    Rating:
    60%
    from S$199.90
    Min. 2 days
  5. 0.5mm / 500mm M bar cutter (head rotation type)
    ESCO 0.5mm / 500mm M bar cutter (head rotation type)
    Esco Part No.  EA527AE-1 
    from S$389.90
    Min. 2 days
  6. Downlight M bar cutter
    Marvel Downlight M bar cutter
    Cut the M bar that came out when the downlight opened! Compatible with small diameters of Φ50 to Φ100 mm. OK if there is a gap of Φ20mm!
    Mass (g)  1100  Overall Length (mm)  500 
    from S$359.90
    Min. 2 days
  7. M bar cutter
    JAPPY M bar cutter
    The M bar cutter head, which has no sparks, dust, or noise, rotates 360 °, so the handle does not hit the wall. Easy work even in narrow places! Dedicated to double and single bars, one-shot cutting Designed to suppress deformation of the cutting part, cutting is beautiful
    Cutting Capacity (mm)  Thickness 0.5  Cutting Capacity  Wild mochi wood single/double compatible  Mass (kg)  1.8 
    from S$399.90
    Min. 4 days
  8. Channel speed cutter
    JEFCOM (DENSAN) Channel speed cutter
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$249.90
    Min. 3 days
  9. Roofing material cutter mat
    EDMA Roofing material cutter mat
    Roofing material slate can be easily cut at hand and punched. Blade 35mm. No dust or dust. hygienical. Work without noise and without worrying about the surrounding environment. Maximum cutting thickness 7 mm. Ergonomically designed anti-slip handle.
    Mass (g)  900  Overall Length (mm)  310 
    from S$249.90
    Min. 4 days
  10. Spare blade for M bar cutter
    FUJIYA Spare blade for M bar cutter
    Trusco Part No.  327-2249  Suitable for  FMC-500 
    Rating:
    80%
    from S$77.99
    Min. 2 days
  11. [For EA527AE-1] Replacement blade
    ESCO [For EA527AE-1] Replacement blade
    Esco Part No.  EA527AE-1B 
    from S$37.99
    Min. 5 days
  12. 1.2mm / 550mm C-chang cutter
    ESCO 1.2mm / 550mm C-chang cutter
    Esco Part No.  EA527AC-2 
    from S$229.90
    Min. 4 days
  13. 1.2mm / 500mm C-chang cutter
    ESCO 1.2mm / 500mm C-chang cutter
    Esco Part No.  EA527AC-1A 
    from S$319.90
    Min. 4 days
  14. 0. 5mm / 500mmM bar cutter (for downlight)
    ESCO 0. 5mm / 500mmM bar cutter (for downlight)
    For drilling mounting holes for small downlights with a diameter of 50 mm or more If there is a gap of 20 mm, the cutting edge can be inserted and the M bar can be cut.
    Mass (kg)  1.1  Overall Length (mm)  500  Cutting Capacity  CW-19 (CS-19) thickness 0.5mm or less 
    from S$349.90
    Min. 4 days
  15. [For EA527AA-11] Replacement fixed blade
    ESCO [For EA527AA-11] Replacement fixed blade
    Esco Part No.  EA527AA-13 
    from S$289.90
    Min. 4 days
  16. [For EA527AA-1] Replacement lower blade
    ESCO [For EA527AA-1] Replacement lower blade
    Esco Part No.  EA527AA-7 
    from S$229.90
    Min. 4 days
  17. Square stud cutter spare blade
    Marvel Square stud cutter spare blade
    Suitable for  For MSC-1065 
    from S$139.90
    Min. 4 days
  18. 940mm raceway cutter (for raceway and duct channel)
    ESCO 940mm raceway cutter (for raceway and duct channel)
    Esco Part No.  EA527AA-11 
    from S$1,299.00
    Min. 4 days
  19. Φ10.5x1.6mm / 580mm raceway puncher
    ESCO Φ10.5x1.6mm / 580mm raceway puncher
    Esco Part No.  EA620YA 
    from S$499.90
    Min. 4 days
  20. [For EA527AA-11] Movable blade
    ESCO [For EA527AA-11] Movable blade
    Esco Part No.  EA527AA-12 
    from S$289.90
    Min. 4 days
  21. [For EA527AA-21] Replacement movable blade
    ESCO [For EA527AA-21] Replacement movable blade
    Esco Part No.  EA527AA-22 
    from S$289.90
    Min. 4 days
  22. [For EA527AA-21] Replacement fixed blade
    ESCO [For EA527AA-21] Replacement fixed blade
    Esco Part No.  EA527AA-23 
    from S$289.90
    Min. 4 days
  23. Channel speed cutter
    JEFCOM (DENSAN) Channel speed cutter
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$169.90
    Min. 3 days
  24. [For EA527AB-2] spare blade
    ESCO [For EA527AB-2] spare blade
    Esco Part No.  EA527AB-2A 
    from S$84.99
    Min. 4 days
  25. Matt 2
    EDMA Matt 2
    Easily cut roofing slate at hand. Easy punching. Hygienic without any dust or dirt. Work without noise and without worrying about the surrounding environment. Ergonomically designed anti-slip handle.
    Mass (g)  910  Blade  55  Maximum cutting thickness (mm) 
    from S$269.90
    Min. 4 days
  26. Matt cup 2
    EDMA Matt cup 2
    Smooth cutting of roofing material slate. Hygienic without any dust or dirt. Work without noise and without worrying about the surrounding environment. Ergonomically designed anti-slip handle.
    Blade  55  Mass (g)  710  Maximum cutting thickness (mm) 
    from S$149.90
    Min. 4 days
  27. Roofing material cutter mat cup
    EDMA Roofing material cutter mat cup
    Blade 35mm. No dust or dust. hygienical. Work without noise and without worrying about the surrounding environment. Maximum cutting thickness 7 mm. Ergonomically designed anti-slip handle.
    Overall Length (mm)  300  Mass (g)  690 
    from S$129.90
    Min. 4 days
  28. [For EA527AA-1] Replacement upper blade
    ESCO [For EA527AA-1] Replacement upper blade
    Esco Part No.  EA527AA-6 
    from S$189.90
    Min. 4 days
  29. Coroco cut
    EDMA Coroco cut
    Support with a pedestal and cut firmly. Compatible with roofing material slate and fiber reinforced cement board. Work without noise and without worrying about the surrounding environment. A clean cut surface without distortion. Curve cutting is also free.
    Mass (g)  730  Maximum cutting thickness (mm) 
    Discontinued
  30. Spare blade for M bar cutter
    FUJIYA Spare blade for M bar cutter
    Spare blade for FMC-500. Dedicated tool for cutting M bars (CW-19, CS-19 plate thickness 0.5 mm or less).
    Nominal Size (mm)  115 
    Discontinued
  31. Square stud cutter
    Marvel Square stud cutter
    Cut the corner stud runner in half !! It is especially recommended for places where noise cannot be generated, such as night work, residential areas, and renovation / renovation sites such as hospitals. For cutting to match dimensions on site. If the delivery destination is a private house (detac... Read More
    Height (mm)  240  Overall Length (mm)  645  Commodity condition  * There is a reason (unused / opened)  Mass (kg)  (Body) 8.3, (Support) 1.3 
    Discontinued
  32. Cordless C bar cutter 38 blades
    MCC Cordless C bar cutter 38 blades
    Mass (kg)  0.52  Trusco Part No.  811-2563 
    Discontinued
  33. Bar cutter
    HIT Bar cutter
    The shape of the blade is designed according to the M bar. The weight is reduced by using an aluminum handle. For cutting the M bar.
    Overall Length (mm)  500  Mass (g)  1400 
    Discontinued
  34. Bar cutter
    HIT Bar cutter
    A spare blade for HMC500.
    Mass (g)  500  Suitable Model  HMC500 
    Discontinued
  35. M bar cutter
    Marvel M bar cutter
    There is no blind spot near the wall !! Lightweight and compact. No noise, dust or sparks. The handle does not hit the wall when rotated 360 °!
    Suitable for  For CW-19 / CS-19  Mass (kg)  1.81  Overall Length (mm)  500 
    Discontinued
View : Grid List
Filter

35 Item(s)

Set Ascending Direction