Blade Replacement
Other Related Pages
- OLFA Cutter Replacement Blade (Large)Type L Material (Blade) Alloy tool steel RoHS directive (corresponding to 10 substances) Correspondence
- NT Cutter Design Knife Replacement Blade (Black)Design knife replacement blade that allows delicate cutting. Cutting edge angle 30 ° Nine design blades (30 °) are connected to one blade. Please fold it one by one before use.Specification Commercial BD type blade, 30 ° Material (Blade) SK2
- Tajima (TJM DESIGN) Spare Blade Type JApproximately 2.5 times the strength of the blade's waist compared to the size of a spare bladeMass (g) 115 Material (Blade) SK120
- MonotaRO Replacement Blade Large for CutterStandard type with a blade width of 18 mm. * Oil is applied to prevent rust, but it does not affect the quality. * Do not use for anything other than its intended purpose.Material (Blade) Carbon steel
- OLFA Black Replacement Blade (Large)Type L Material (Blade) Alloy tool steel RoHS directive (corresponding to 10 substances) Correspondence
- OLFA Cutter Replacement Blade (Small)Type S Material (Blade) Alloy tool steel RoHS directive (corresponding to 10 substances) Correspondence
- OLFA Limited Black Replacement Blade (Small)Type S Material (Blade) Alloy tool steel RoHS directive (corresponding to 10 substances) Correspondence
- MonotaRO Cutter spare blade large sharp angle black bladeA high quality cutter blade made by TJM Design. An acute-angled blade that is resistant to chipping and emphasizes sharpness. Spare blade common to all L-shaped cutters * Please do not use for any other purposeMaterial (Blade) SK120 (old SK2)
- Tajima (TJM DESIGN) Cutter Replacement Blade (Large) SUGOBATerrible blade silver is a replacement blade that emphasizes durability compared to Terrible blade black. Terrible blade black is a replacement blade that emphasizes sharpness compared to terrific blade silver. Can be used for L-shaped cutters of various companies.
- OLFA Intricate Working Cutter Replacement BladeMass (g) 30 Suitable Spare Blade / Cutter 141B Material (Blade) Alloy tool steel RoHS directive (corresponding to 10 substances) Correspondence
- OLFA Art Knife Replacement BladeMass (g) 32.6 Suitable Spare Blade / Cutter For 10B Material (Blade) SK-120 RoHS directive (corresponding to 10 substances) Correspondence
- OLFA Sub Knife L Type Replacement BladeTrapezoidal blade that can be used before and after the bladeSuitable Model New sub knife L type, safety cutter Mass (g) 35 Material (Blade) SK-120 RoHS directive (corresponding to 10 substances) Correspondence
- OLFA Limited Black Blade (Extra Large H)Since it is the same size as the oversized H blade, it can be attached to all cutters that can attach the oversized H blade. The special black blade with ultra-sharp polishing has unrivaled sharpness. The special black blade extra large H of professional super sharp angle polishing, which was con... Read MoreSuitable Model 101B、151BG、196B Type XL Material (Blade) Alloy tool steel RoHS directive (corresponding to 10 substances) Correspondence
- OLFA Segment-Free Replacement Blade (Large)Material (Blade) Alloy tool steel
- OLFA Rotary 45mm Replacement BladeBlade Diameter (Φmm) 45 Suitable Spare Blade / Cutter 29B、41B、156B Material (Blade) Tungsten steel RoHS directive (corresponding to 10 substances) Correspondence
- OLFA Art Knife Pro Replacement BladeExcellent sharpness and durability Olfa's special bladeRoHS directive (corresponding to 10 substances) Correspondence
- OLFA Spare Blade, H-Blade, Extra LargeType XL Mass (g) 345 Suitable Spare Blade / Cutter 101B、151BG、196B Material (Blade) Alloy tool steel RoHS directive (corresponding to 10 substances) Correspondence
- NT Cutter A Type Cutter Replacement BladeIt is processed with a special blade that has good sharpness, strength and durability of the cutting edge. For office work and light work.Type A blade Material (Blade) SK2
- MonotaRO Replacement Blade Work Cutter Tip 30 ° SquareIt is a special blade for Monotaro "work cutter (tip 30 ° angle)". For blade replacement. * Do not use for any purpose other than its intended purpose. * Please keep out of reach or sight of children.Mass (g) 1.8 (1 sheet) Material (Blade) Alloy tool steel Blade Angle (°) 30
- 3M Titanium Coat Cutter Replacement BladeHigh hardness titanium coated folding blade type cutter knife. A high-spec cutter knife with excellent sharpness and durability. High-hardness titanium alloy (TiN) coating on carbon tool steel blades keeps sharpness twice as long as before *. * Manufacturer test result: Comparison with a general ... Read MoreMaterial (Blade) Carbon tool steel
- OLFA Rotary 28mm Replacement BladeBlade Diameter (Φmm) 28 Suitable Spare Blade / Cutter 36B, 30B, 194B (perforation cutter 28) Material (Blade) Tungsten steel RoHS directive (corresponding to 10 substances) Correspondence
- OLFA Spare Blade for Handiwork Cutter (Small)"For work" cutter knife replacement blade. A foldable blade type replacement blade with a sharp cutting edge angle of 30 degrees, suitable for fine work.Suitable Spare Blade / Cutter 141S、141BS、215、Ltd-05 Material (Blade) Alloy tool steel RoHS directive (corresponding to 10 substances) Correspondence
- NT Cutter Thick Cutting Craft Cutter Replacement BladeFor durable thick cutting workMaterial (Blade) SK2
- MonotaRO Spare blade cutter for extra largeStandard type with a blade width of 25 mm Spare blade common to all oversized cutters * Do not use for any other purpose. * Be careful when replacing the blade. * Because it is a knife, please handle and take it out with care. * Please keep out of reach of children.Material SK-5
- OLFA Craft Knife L Type Refill BladeType L type Mass (g) 38 Suitable Spare Blade / Cutter Craft knife L type, limited CK Material (Blade) SUS420J2 RoHS directive (corresponding to 10 substances) Correspondence
- OLFA Spare Blade, Thickness MThe replacement blade (M thickness) is a new standard size that combines the advantages of a large blade with strong sharpness and a small blade that can be easily used. The medium-sized blade with a blade thickness of 0.45 mm has less blurring and realizes stable cutting from thin paper to thick... Read MoreMaterial (Blade) Alloy tool steel RoHS directive (corresponding to 10 substances) Correspondence
- OLFA Segment Free Replacement Blade (Small)Material (Blade) Alloy tool steel
- OLFA Rotary 60mm blade replacementSuitable for 136B Mass (g) 28 Blade Diameter (Φmm) 60 Material (Blade) Tungsten steel RoHS directive (corresponding to 10 substances) Correspondence
- MonotaRO Spare blade rotary cutter for blade diameter 45mm typeIt is a replacement blade for Monotaro RC45. As a replacement blade for rotary cutters. * Do not use for any purpose other than its intended purpose.Blade Diameter (Φmm) 45 Material (Blade) SKS
- OLFA Spare Blade for 205BThe blade can be used back and forth. Spare blade for 205B. For plastic boards such as acrylic and vinyl chloride boards.Mass (g) 22 Material (Blade) SKS-7 As ONE Part Number 1-6222-02 RoHS directive (corresponding to 10 substances) Correspondence
- OLFA Limited Black Replacement Blade (Medium)Type Medium Suitable Spare Blade / Cutter 145B Material (Blade) Alloy tool steel RoHS directive (corresponding to 10 substances) Correspondence
- MonotaRO Spare blade rotary cutter for blade diameter 28mm typeIt is a replacement blade for Monotaro RC28. As a replacement blade for rotary cutters. * Do not use for any purpose other than its intended purpose.Blade Diameter (Φmm) 28 Material (Blade) SKS
- OLFA Speed Blade (Large)Material Alloy tool steel Mass (g) 50 RoHS directive (corresponding to 10 substances) Correspondence
- OLFA P-450 Replacement BladeFor plastic boards such as acrylic and shrimp boards.Mass (g) 18 Suitable Spare Blade / Cutter 13B、204B Material (Blade) SKS-7 RoHS directive (corresponding to 10 substances) Correspondence
- NT Cutter Spare Blade for Type ADIt is processed with a special blade that has good sharpness, strength and durability of the cutting edge. For office work and light work.Suitable Model A-1P、AD-2P Mass (g) 39 Type AD blade Material (Blade) SK2
- NT Cutter Design Knife Replacement BladeFor delicate cutting work such as artwork and paper-cutting.Suitable Model D-400GP, D-500GP and other D-types Mass (g) 18 Blade Angle (°) 45
- OLFA Limited Black Blade (Medium)02Ultra-thin medium-sized blade with a blade thickness of 0.2 mm with an inconspicuous cut end Compatible body: Special M typeMaterial (Blade) Alloy tool steel RoHS directive (corresponding to 10 substances) Correspondence
- OLFA Spare Blade, H-Blade, Extra LargeSuitable Model 101B、151BG、196B Type XL Mass (g) 112 Suitable Spare Blade / Cutter 101B、151BG、196B Material (Blade) Alloy tool steel RoHS directive (corresponding to 10 substances) Correspondence