All Category

Torque Screwdrivers

A torque driver is a screwdriver used to tighten screws with a set torque. There are two methods: signal type and direct reading type. The signal type prevents overtightening of the screw by, for example, idling when the set torque is reached. The direct-reading type has a meter, so it is a driver that knows what torque it is tightening numerically. The role of the torque driver is to adjust the force. Indispensable when assembling precision equipment. There are insulation type and precision type.
View : Grid List
Filter

Items 1 - 40 of 201

Set Ascending Direction
  1. Torque screwdriver
    HAZET Torque screwdriver
    A simple torque driver. You can easily set the torque by inserting the attached hex key into the hole at the grip end. Low torque general purpose torque management
    Overall Length (mm)  190  Square Drive (mm)  6.35  Main Application  General tightening work  Type  Preset type  Load Direction  Right 
    from S$299.90
    Min. 3 days
  2. [For EA723VJ / VP] Torque value adjustment kit
    ESCO [For EA723VJ / VP] Torque value adjustment kit
    from S$36.99
    Min. 4 days
  3. Idling Type Preset Torque Screwdriver
    TOHNICHI Mfg Idling Type Preset Torque Screwdriver
    An idling type that can be used in a wide range from mass production to maintenance and has no overtorque. Preset type with lock mechanism, with scale * For products with calibration documents and traceability system diagrams, we can only accept orders on the web. * Bits are sold separately. * Pr... Read More
    Specification  Bit sold separately.  Other  Bit sold separately.  RoHS directive (corresponding to 10 substances)  Correspondence  Main Application  General tightening work  Type  Preset type  Load Direction  Right  Accuracy (%)  ±3 
    Rating:
    75%
    from S$219.90
    Min. 2 days
  4. Torque Driver Idling Type
    MonotaRO Torque Driver Idling Type
    It is a preset type torque driver. Since it is an idling type, it will not be overtightened. For assembling automobile parts and home appliances * Do not use for any other purpose. * Suitable for types with a bit groove length of 8 to 8.2 mm.
    Hex Hole Size Across Flats (mm)  6.35  Type  Preset type  Load Direction  Right  Accuracy (%)  ±6 
    Rating:
    80%
    from S$159.90
    Min. 2 days
  5. Canon Idling Torque Screwdriver
    KANON (Nakamura Nfg.) Canon Idling Torque Screwdriver
    Since it has a lock mechanism, there is no torque deviation during work. When the specified torque value is reached, the clutch will automatically disengage and run idle, so there is no need to worry about overtightening. Since its own weight is light and the total length is short, it is easy to ... Read More
    RoHS directive (corresponding to 10 substances)  Correspondence  Main Application  General tightening work  Load Direction  Left and right  Type  Preset type  Accuracy (%)  ±3 
    Rating:
    95%
    from S$189.90
    Min. 2 days
  6. Precision Microtorque Screwdriver
    OTTIMO Precision Microtorque Screwdriver
    A precision screwdriver with a torque adjustment function. With torque adjustment, thread damage that is common with machine screws is reduced. Continuous work with constant torque is possible. Comes in a convenient storage case! For screw tightening work that requires torque adjustment for preci... Read More
    Main Application  Precision tightening work  Torque Adjustment Range (Nm)  0.02~0.18  Type  Set product 
    Rating:
    91%
    from S$59.99
    Min. 2 days
  7. Screwdriver Digital Torque Set
    TONE Screwdriver Digital Torque Set
    A driver-type digital torque wrench that supports small torque management. A (driver type) digital torque measuring instrument that is used by inserting a bit into the holder at the tip. Equipped with an overtorque prevention function, the allowable value can be measured in the range of 50% to 95... Read More
    Storage Temperature Range (℃)  -20~50  Minimum Scale (cNm)  0.01/0.1  Mass (kg)  0.15  Overall Length L (mm)  212  Case dimensions (width x depth x height) (mm)  250×100×50  Dimension T (mm)  32  Dimension D (Φmm)  38.5  Dimension W (mm)  40  Operating Temperature Range (℃)  5~42  Square Drive (mm)  6.35  Bit Width across Flats (mm)  6.35  Type  Digital type  Load Direction  Left and right  Function  Overtorque prevention function  Measurement Mode  Peak mode / track mode  Suitable Battery  Single 4 form x 2 Alkaline battery  Display Unit  cN・m  Accuracy (%)  ± 3 (torque) 
    Rating:
    60%
    from S$249.90
    Min. 2 days
  8. Torque Driver
    TOHNICHI Mfg Torque Driver
    The best torque driver for inspecting tightened screws. Since there are scales on the left and right, tightening and return torque can be used for inspection. Since the needle is equipped as standard, the maximum value can be easily read. For inspection and tightening. * For products with calibra... Read More
    Type  Dial type  Main Application  Inspection work / General fastening work  Load Direction  Left and right  Accuracy (%)  ±3 
    Rating:
    80%
    from S$219.90
    Min. 2 days
  9. Torque screwdriver idle type mini
    MonotaRO Torque screwdriver idle type mini
    Since it has a lock mechanism, work can be performed without torque deviation. Since it is an idling type, you can work without overtorque. * Bit sold separately * Only clockwise rotation is possible. Please note that counterclockwise rotation may cause malfunction. *Compatible with 9.5mm bit gro... Read More
    Minimum Scale (cNm)  0.5  Overall Length (mm)  104  Mass (g)  110  Torque Adjustment Range (cNm)  5~60  Hex Hole Size Across Flats (mm)  6.35  Main Application  General tightening work  Type  Preset type  Accuracy (%)  ±6 
    Rating:
    60%
    from S$139.90
    Min. 2 days
  10. Canon Preset Type Idling Torque Driver
    KANON (Nakamura Nfg.) Canon Preset Type Idling Torque Driver
    When the specified torque value is reached, the clutch will automatically disengage and run idle, so there is no need to worry about overtightening. The bit insertion port is now the same as the commercially available bit (hexagon 6.35 mm). Two + bits are included. For assembling automobile parts... Read More
    Dimension D1 (Φmm)  10  Dimension L2 (mm)  10.5  Overall Length (mm)  111  Dimension D2 (Φmm)  14.4  Dimension D3 (Φmm)  15.5  Grip Diameter (Φmm)  16.3  Dimension L1 (mm)  26  Bit shank Diameter (Φmm)  Bit Shank across Flats (mm)  6.35  Mass (g)  60  RoHS directive (corresponding to 10 substances)  Correspondence  Load Direction  Left and right  Type  Preset type  Included Accessories  Standard bit (+) No.0, No.1  Accuracy (%)  ±3 
    Rating:
    100%
    from S$189.90
    Min. 2 days
  11. 7400 Craft Form Torque Bit Folder
    Wera 7400 Craft Form Torque Bit Folder
    Overall Length (mm)  155  Suitable Bit  6.35mm  Main Application  General tightening work  Load Direction  Right  Accuracy (%)  ±6 
    Rating:
    100%
    from S$139.90
    Min. 2 days
  12. Adjustable Torque Screwdriver
    Park Tool Adjustable Torque Screwdriver
    A torque driver with a setting of 4 to 6 Nm, which has a high frequency of tightening torque management. Protects carbon resin and lightweight delicate parts from work mistakes such as overtorque. We adopted an ergonomic and easy-to-grip shape. Two types are available: a fixed torque value type t... Read More
    Direction of Rotation  Clockwise (clockwise) 
    Rating:
    90%
    from S$109.90
    Min. 2 days
  13. Torque Screwdriver Non-Idling Preset Type
    TOHNICHI Mfg Torque Screwdriver Non-Idling Preset Type
    The non-spinning torque driver has a feeling of slipping (weakness) as if the torque was released by about 15 degrees when the set torque was reached, and the bit part does not rotate even if the wrist is twisted. Tightening should be completed within about 15 degrees. It is ideal for torque mana... Read More
    Specification  Bit sold separately.  Main Application  General tightening work  Type  Preset type  Load Direction  Right  Other  The pit is sold separately.  Accuracy (%)  ±3 
    Rating:
    90%
    from S$189.90
    Min. 2 days
  14. Preset type torque screwdriver
    GEDORE Preset type torque screwdriver
    It can be used with a wide range of torque values. When the set torque value is reached, it spins, so it is always tightened with accurate and constant torque. A durable and high quality torque driver. The ergonomically designed handle makes it easy to grip. It is a lightweight model. Electronic ... Read More
    2018 Trusco page  1 1935  Square Drive (mm)  6.35  Main Application  General tightening work  Type  Preset type  Load Direction  Right  Accuracy (%)  ±6 
    Rating:
    20%
    from S$159.90
    Min. 2 days
  15. Torque screwdriver
    MATATAKITOYO Torque screwdriver
    Uses a wind scale that is easy to see when setting the torque value. Uses an easy-to-grip resin grip. For forward rotation only. With 1/4 hexagon bit holder.
    Minimum Scale (Nm)  0.5  Overall Length (mm)  154  Torque Adjustment Range (Nm)  1~8  Mass (g)  370  Square Drive (mm[inch])  6.35[1/4]  RoHS directive (corresponding to 10 substances)  Correspondence  Main Application  General tightening work  Type  Preset type  Load Direction  Right  Specification  With inspection data, adjustable type  Accuracy (%)  ±4 
    Rating:
    90%
    from S$189.90
    Min. 2 days
  16. Torque screwdriver
    Park Tool Torque screwdriver
    Protects carbon resin and lightweight delicate parts from work mistakes such as overtorque. The main body is made of highly durable metal and covered with easy-to-grip resin to realize a tool with high workability.
    Type  Torque value fixed type 
    from S$67.99
    Min. 7 days
  17. Torque Screwdriver
    TOHNICHI Mfg Torque Screwdriver
    Preset type idling torque driver for micro screws (M1 to M2). * For products with calibration documents and traceability system diagrams, we can only accept orders on the web. * BMRD bits are sold separately. * AMRD can only be used with dedicated bits. * Products with proofreading cannot be canc... Read More
    Main Application  Precision tightening work  Type  Preset type  Load Direction  Right  Accuracy (%)  ±3 
    from S$299.90
    Min. 2 days
  18. Variable torque screwdriver
    Wiha (NOGA) Variable torque screwdriver
    A torque driver that can be tightened with the set torque value. High precision tightening torque within ± 6%. When the tightening torque reaches the set torque value, you will be notified by a clicking sound. When the set torque is exceeded, the driver blade slides inside the handle. The torque ... Read More
    2018 Trusco page  1 1940  Bit Width (mm)  4 (2859 series)  Main Application  General tightening work  Type  Preset type  Load Direction  Right  Accuracy (%)  ±6 
    from S$299.90
    Min. 2 days
  19. Preset type torque driver
    KTC Preset type torque driver
    When the set torque is reached, the grip will spin about 90 ° with a click feeling. The measurement accuracy clears ± 6% of the ISO standard. The bit is magnetically removable, and a bit for a plate ratchet replacement driver (opposite side of axis 6.3 mm) can be used. * Double-headed bits cannot... Read More
    Main Application  General tightening work  Type  Preset type  Load Direction  Right  Accuracy (%)  ±6 
    Rating:
    100%
    from S$469.90
    Min. 4 days
  20. 292 Easy Torque Torque screwdriver
    Wiha (NOGA) 292 Easy Torque Torque screwdriver
    Material (Grip)  Resin 
    from S$109.90
    Min. 2 days
  21. Torque driver
    TOHNICHI Mfg Torque driver
    ANRD / BMRD non-idling type. Since there is no vibration due to idling, it is ideal for assembling sensors and electronic components. * For products with calibration documents and traceability system diagrams, we can only accept orders on the web. * Products with proofreading cannot be canceled a... Read More
    RoHS directive (corresponding to 10 substances)  Correspondence  Specification  Non-slip type, with scale, ISO6789  Main Application  Precision tightening work  Type  Preset type  Load Direction  Right  Accuracy (%)  ±3 
    from S$269.90
    Min. 5 days
  22. Canon umbrella type torque screwdriver (with stylus)
    KANON (Nakamura Nfg.) Canon umbrella type torque screwdriver (with stylus)
    The big point is ease of use. It is a direct reading type that reads the twist of the torsion bar with an easy-to-read circular scale plate. Can be used in the left-right direction. The scale plate with needles for both left and right is large and easy to read. Suitable for small capacity such as... Read More
    Scale Plate Diameter (Φmm)  78  Type  Dial type  Preset Needle  Included  Main Application  Inspection / destructive testing  Load Direction  Left and right  Accuracy (%)  ±3 
    from S$299.90
    Min. 5 days
  23. 0.3-1.2Nm Torque Screwdriver (Preset Type)
    ESCO 0.3-1.2Nm Torque Screwdriver (Preset Type)
    Overall Length (mm)  155  Torque Adjustment Range (cNm)  30~120  Minimum Scale (cNm)  Esco Part No.  EA723VR-1  Main Application  General tightening work  Type  Preset type  Load Direction  Right  Accuracy (%)  ±6 
    Rating:
    20%
    from S$119.90
    Min. 2 days
  24. 1.2-3.0mm Torque Screwdriver (Preset Type)
    ESCO 1.2-3.0mm Torque Screwdriver (Preset Type)
    Minimum Scale (cNm)  10  Torque Adjustment Range (cNm)  120~300  Overall Length (mm)  155  Esco Part No.  EA723VR-2  Main Application  General tightening work  Type  Preset type  Load Direction  Right  Accuracy (%)  ±6 
    from S$119.90
    Min. 2 days
  25. ESD single-purpose torque driver
    GEDORE ESD single-purpose torque driver
    When the set torque value is reached, it spins, so it is always tightened with accurate and constant torque. A durable and high quality torque driver. The ergonomically designed handle makes it easy to grip. It is a lightweight model. Electronic equipment assembly and maintenance related.
    2018 Trusco page  1 1935  Square Drive (mm)  6.35  Main Application  For work related to weak electricity  Load Direction  Right  Type  Simple type  Accuracy (%)  ±6 
    from S$159.90
    Min. 3 days
  26. Torque driver
    TOHNICHI Mfg Torque driver
    Insulation type of RTD. Ideal for work that requires insulation. * For products with calibration documents and traceability system diagrams, we can only accept orders on the web. * Bits are sold separately. * Products with proofreading cannot be canceled after ordering. * Products that include (w... Read More
    Withstand Voltage (V)  AC1000  RoHS directive (corresponding to 10 substances)  Correspondence  Main Application  For work related to weak electricity  Type  Preset type  Load Direction  Right  Accuracy (%)  ±3 
    from S$389.90
    Min. 5 days
  27. Torque screwdriver
    MATATAKITOYO Torque screwdriver
    Uses a wind scale that is easy to see when setting the torque value. Uses an easy-to-grip resin grip. For forward rotation only. With sliding T handle.
    Minimum Scale (Nm)  0.1  Overall Length (mm)  158  Torque Adjustment Range (Nm)  1~5  Mass (g)  280  Square Drive (mm[inch])  6.35[1/4]  RoHS directive (corresponding to 10 substances)  Correspondence  Main Application  General tightening work  Type  Preset type  Load Direction  Right  Specification  With inspection data, adjustable type  Accuracy (%)  ±4 
    from S$219.90
    Min. 6 days
  28. Umbrella torque driver
    KANON (Nakamura Nfg.) Umbrella torque driver
    A torque driver that can directly connect the tightening torque. Since there are left and right scales, you can see the retightening and loosening torque. There is also a transparent scale plate type N-DPSK-2 that makes it easy to see the tip of the bit. The bit is equipped with two +. For inspec... Read More
    Scale Plate Diameter (Φmm)  78  Type  Dial type  Preset Needle  Included  Main Application  Inspection / destructive testing  Load Direction  Left and right  Accuracy (%)  ±3 
    from S$299.90
    Min. 5 days
  29. Variable torque screwdriver
    Wiha (NOGA) Variable torque screwdriver
    Main Application  General tightening work  Type  Preset type  Load Direction  Right 
    from S$299.90
    Min. 3 days
  30. 0.2- 1.5Nm Torque screwdriver (preset type)
    ESCO 0.2- 1.5Nm Torque screwdriver (preset type)
    Overall Length (mm)  138  Torque Adjustment Range (cNm)  20~150  Esco Part No.  EA723HJ-1  Main Application  General tightening work  Type  Preset type  Accuracy (%)  ±10 
    Rating:
    20%
    from S$119.90
    Min. 6 days
  31. 300 Torque screwdriver
    Wera 300 Torque screwdriver
    Main Application  Inspection work / General fastening work  Load Direction  Right  Type  Single-purpose type  Accuracy (%)  ±10 
    from S$86.99
    Min. 2 days
  32. Craft Foam Torque Screwdriver Set
    Wera Craft Foam Torque Screwdriver Set
    The special grip shape provides easy grip and fit. Hexagon, Torx (R), Torx Plus (R) are included in the set. There are two types of bit holders with different torque adjustment ranges. General tightening work
    Minimum Scale (Nm)  0.05  Bit Width (mm)  6.35  Main Application  General tightening work  Load Direction  Right  Type  Set product  Accuracy (%)  ±6 
    from S$469.90
    Min. 2 days
  33. Torque fix key / hexagon cap screw replacement blade
    Wiha (NOGA) Torque fix key / hexagon cap screw replacement blade
    Torque fix [[(R)]] key Hex cap screw replacement blade. Screw tightening that requires torque management.
    Mass (g)  2018 Trusco page  1 1941  Type  bit 
    from S$9.99
    Min. 2 days
  34. Digital torque screwdriver
    TASCO Digital torque screwdriver
    from S$299.90
    Min. 6 days
  35. 0.3-3.0Nm Torque screwdriver set
    ESCO 0.3-3.0Nm Torque screwdriver set
    Torque Adjustment Range (cNm)  30~120/120~300  Minimum Scale (cNm)  5/10  Esco Part No.  EA723VG-1  Main Application  General tightening work  Type  Set product 
    from S$459.90
    Min. 2 days
  36. 7400 Craft Foam ESD Torque Bit Folder
    Wera 7400 Craft Foam ESD Torque Bit Folder
    Overall Length (mm)  155  Mass (g)  188  Suitable Bit  6.35mm  Type  Preset type  Load Direction  Right  Accuracy (%)  ±6 
    from S$299.90
    Min. 2 days
  37. Mechanical torque (torque screwdriver) NM (J)
    PB SWISS TOOLS Mechanical torque (torque screwdriver) NM (J)
    The easy-to-read analog scale dial type makes it easy to set the torque. * Blade is sold separately.
    Type  Dial type  Main Application  General tightening work  Accuracy (%)  ±6 
    from S$229.90
    Min. 4 days
  38. Torque bit holder
    Wera Torque bit holder
    The special grip shape provides easy grip and fit. General tightening work.
    Overall Length (mm)  150  Suitable Bit  6.35mm  Main Application  General tightening work  Load Direction  Right  Accuracy (%)  ±6 
    from S$189.90
    Min. 2 days
  39. One-touch replaceable 1000V insulation torque screwdriver set
    TASCO One-touch replaceable 1000V insulation torque screwdriver set
    One-touch type 1000V insulated torque driver Clear the test at 10000V underwater!
    from S$589.90
    Min. 6 days
  40. 1.2-3.0Nm Torque screwdriver (adjustable)
    ESCO 1.2-3.0Nm Torque screwdriver (adjustable)
    Minimum Scale (cNm)  10  Torque Adjustment Range (cNm)  120~300  Overall Length (mm)  160  Esco Part No.  EA723VH-2  Main Application  General tightening work  Load Direction  Left and right  Type  Preset type  Accuracy (%)  ±6 
    from S$189.90
    Min. 3 days
View : Grid List
Filter

Items 1 - 40 of 201

Set Ascending Direction