All Category

Torque Wrench & Screwdriver Related

Optional products are products that make it easy to use an electric torque wrench or torque driver. The battery pack is an indispensable charging part when working outside without electricity. If the bolts to be tightened do not fit with the torque wrench size, you can adjust the size with a torque wrench adapter. Be careful when tightening with a torque wrench. The instrument that measures and manages the torque tightening axial force is an axial force meter, and the axial force is calculated from the amount of shaft movement detected by the ultrasonic sensor. Since this device is fixed at the same position by a magnet holder, measurement with excellent reproducibility is possible.
View : Grid List
Filter

Items 1 - 40 of 179

Set Ascending Direction
  1. 3 / 8DR torque adapter
    SIGNET 3 / 8DR torque adapter
    It is used by attaching it to a torque wrench. It is a very convenient torque adapter for torque management of bolts and nuts in places where sockets cannot be tightened. If it is attached to a torque wrench, an error will occur by the amount of the effective length of the torque adapter, so it i... Read More
    Square Drive (mm)  3/8"SQ  Effective Length (mm)  50  Material  Chrome vanadium steel 
    Rating:
    96%
    from S$19.99
    Min. 2 days
  2. Hard case for torque wrench
    TOHNICHI Mfg Hard case for torque wrench
    Mass (kg)  0.36  Dimensions (H x W x D) (mm)  60×520×80  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    91%
    from S$39.99
    Min. 2 days
  3. QSP3 Adjustment Tool
    TOHNICHI Mfg QSP3 Adjustment Tool
    For torque sets such as single-purpose torque wrench SP2, RSP2, QSPCA, etc.
    RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    87%
    from S$15.99
    Min. 2 days
  4. Bit Replacement Drill Chuck
    ANEX Bit Replacement Drill Chuck
    Even if the shaft is broken, it can be replaced with an electric bit. Comes with a chuck key. The chuck adapter insertion angle is hexagonal 6.35 mm. For drilling holes and polishing with a whetstone with a shaft
    from S$53.99
    Min. 2 days
  5. Smarck sleeve
    PROCHI Smarck sleeve
    The tip can be installed smartly with the specified torque. When the specified torque is reached, it spins and prevents overtorque. Bits with a drive angle of 1 / 4SQ can be used. For throw-away tip replacement, tightening of delicate products such as resin, and other precision work that requires... Read More
    Overall Length (mm)  38  Accuracy (%)  (Torque) ± 10 
    Rating:
    60%
    from S$29.99
    Min. 5 days
  6. Smarck Torque Sleeve
    PROCHI Smarck Torque Sleeve
    The tip can be installed smartly with the specified torque. When the specified torque is reached, it spins and prevents overtorque. Bits with a drive angle of 1 / 4SQ can be used. For throw-away tip replacement. For tightening delicate products such as resin. For other precision work that require... Read More
    Overall Length (mm)  38 
    Rating:
    20%
    from S$29.99
    Min. 4 days
  7. Auxiliary fasteners for LTD
    TOHNICHI Mfg Auxiliary fasteners for LTD
    Facilitates tightening of large LTD types.
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$87.99
    Min. 2 days
  8. Resin grip
    TOHNICHI Mfg Resin grip
    Suitable Model  RTD、LTD、RNTD、NTD 
    from S$9.99
    Min. 2 days
  9. Head rubber cover for QH / QL
    TOHNICHI Mfg Head rubber cover for QH / QL
    Rating:
    100%
    from S$10.99
    Min. 5 days
  10. Torque adjustment rod for NTD / RNTD
    TOHNICHI Mfg Torque adjustment rod for NTD / RNTD
    Single-purpose torque driver For NTD and RNTD type torque sets.
    from S$27.99
    Min. 2 days
  11. LC adapter set
    TOHNICHI Mfg LC adapter set
    Rating:
    100%
    from S$229.90
    Min. 4 days
  12. Smarck Sleeve Stepped
    PROCHI Smarck Sleeve Stepped
    When the specified torque is reached, it spins, preventing overtorque. The colors are different for each size, so the size is easy to understand at a glance and easy to manage. With a highly versatile drive angle of 1/4 ”SQ, the tip can be replaced according to the application. For throw-away tip... Read More
    Accuracy (%)  (Torque) ± 10  Underneck Length (mm)  13  Overall Length (mm)  60 
    from S$29.99
    Min. 6 days
  13. Female coupler
    Izumi Products Company Female coupler
    Trusco Part No.  852-0369 
    from S$76.99
    Min. 2 days
  14. Hard case for torque wrench
    TOHNICHI Mfg Hard case for torque wrench
    Rating:
    60%
    from S$99.90
    Min. 2 days
  15. Thrust ring tool
    TOHNICHI Mfg Thrust ring tool
    For torque sets such as single-purpose type and r nine wrench SP, RSP, QS, CSP type.
    from S$39.99
    Min. 5 days
  16. Torque wrench plastic case only
    STAHLWILLE Torque wrench plastic case only
    * Inner tray is sold separately.
    from S$64.99
    Min. 4 days
  17. Adjustment box for QLE
    TOHNICHI Mfg Adjustment box for QLE
    from S$27.99
    Min. 5 days
  18. Tonichi DA6-4 down adapter
    TOHNICHI Mfg Tonichi DA6-4 down adapter
    Height (mm)  19  Square Drive (mm)  19 (male), 12.7 (female)  Allowable Torque (Nm)  220  Outer Diameter (mm)  28  Trusco Part No.  817-3571  Mass (g)  About 34 
    from S$159.90
    Min. 5 days
  19. Square drive for torque wrench
    STAHLWILLE Square drive for torque wrench
    Square drive adapter for torque wrench
    from S$39.99
    Min. 4 days
  20. 7301 tray
    STAHLWILLE 7301 tray
    Mass (g)  88 
    from S$18.99
    Min. 4 days
  21. adapter
    TOHNICHI Mfg adapter
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$109.90
    Min. 7 days
  22. Battery pack for CEM3
    TOHNICHI Mfg Battery pack for CEM3
    * Not compatible with older models CEM2, CTB, and CTA-P.
    Suitable for  For CEM3 / CME3-P, CTA2, CTB2 only 
    from S$139.90
    Min. 2 days
  23. Battery pack CEM2
    TOHNICHI Mfg Battery pack CEM2
    For CEM2
    from S$149.90
    Min. 2 days
  24. Smarck hexagon set
    PROCHI Smarck hexagon set
    A versatile hexagonal bit set. When the specified torque is reached, it spins and prevents overtorque. You can use your own bit with 1 / 4SQ plug. For throw-away tip replacement, tightening of delicate products such as resin, and other precision work that requires torque management. * There are m... Read More
    Accuracy (%)  (Torque) ± 10 
    from S$159.90
    Min. 2 days
  25. Extension socket for main wrench
    TOP KOGYO Extension socket for main wrench
    Extension socket that can be used with the top water main wrench series. Deep / narrow / reachable! Penetration type. The socket part can be extended by 50 mm. It can be used not only for main wrench but also for box wrench and ratchet wrench. When using a water main wrench, to avoid interference... Read More
    Dimension H (mm)  31.5  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$39.99
    Min. 4 days
  26. Connection cord
    TOHNICHI Mfg Connection cord
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$76.99
    Min. 7 days
  27. LS curl cord
    TOHNICHI Mfg LS curl cord
    RoHS directive (corresponding to 10 substances)  Correspondence  Suitable Model  TT2000 
    from S$76.99
    Min. 7 days
  28. (3 / 8SQ) Adapter for torque wrench
    STAHLWILLE (3 / 8SQ) Adapter for torque wrench
    The glasses part is AS-drive (surface contact), and a higher quality HPQ (High Performance Quality) series torque wrench adapter.
    Dimension h2 (mm)  11  Outer diameter d2 (Φmm)  19  Square Drive Size  3/8  Dimension V (mm)  50.8 
    from S$109.90
    Min. 4 days
  29. One-touch joint for U (female)
    TOHNICHI Mfg One-touch joint for U (female)
    Various joints that connect Unitork and air hoses.
    Suitable Model  30CN~U250CN 
    from S$29.99
    Min. 7 days
  30. (3 / 8SQ) Torque wrench adapter
    STAHLWILLE (3 / 8SQ) Torque wrench adapter
    Extension spline wrench adapter used in combination with a torque wrench.
    Outer diameter d2 (Φmm)  (Insertion section) 19  Square Drive Size  3/8 
    from S$189.90
    Min. 4 days
  31. (3 / 8SQ) Torque wrench adapter
    STAHLWILLE (3 / 8SQ) Torque wrench adapter
    Extension spline wrench adapter used in combination with a torque wrench. The glasses part is AS-drive (surface contact).
    Outer diameter d2 (Φmm)  (Insertion section) 19  Square Drive Size  3/8 
    from S$129.90
    Min. 4 days
  32. Torque adjustment adapter
    TOHNICHI Mfg Torque adjustment adapter
    When calibrating MPQL / MQSP with a torque wrench tester, remove the socket and connect it to the main unit.
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$109.90
    Min. 7 days
  33. Tonichi DA4-3 down adapter
    TOHNICHI Mfg Tonichi DA4-3 down adapter
    Square Drive (mm)  12.7 (male), 9.5 (female)  Height (mm)  15  Outer Diameter (mm)  18  Allowable Torque (Nm)  70  Trusco Part No.  817-3570  Mass (g)  About 11 
    from S$139.90
    Min. 5 days
  34. Tonichi DA3-2 down adapter
    TOHNICHI Mfg Tonichi DA3-2 down adapter
    Height (mm)  12  Outer Diameter (mm)  13  Allowable Torque (Nm)  14  Trusco Part No.  817-3569  Square Drive (mm)  9.5 (male), 6.35 (female)  Mass (g)  About 5 
    from S$119.90
    Min. 4 days
  35. Resin chuck
    TOHNICHI Mfg Resin chuck
    A resin chuck that does not damage delicate workpieces.
    Suitable Model  ATG/ATGE 
    from S$27.99
    Min. 4 days
  36. Power torque tool socket
    TOHNICHI Mfg Power torque tool socket
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$16.99
    Min. 7 days
  37. Male coupler
    Izumi Products Company Male coupler
    Trusco Part No.  852-0384 
    from S$76.99
    Min. 6 days
  38. Pokayoke multi-controller TCSK-99MA
    KANON (Nakamura Nfg.) Pokayoke multi-controller TCSK-99MA
    -A controller that manages the number of tightened pieces. -Built-in input / output terminals that can be used even in a centralized management system. -Wireless use is also possible as an option.・ Number of counters: 1 to 99. A controller for a wired torque wrench (SWP type) for forgetting to t... Read More
    Mass (kg)  1.7  Power Input (V)  100~240  Trusco Part No.  808-6565  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$1,099.00
    Min. 5 days
  39. Battery pack (DC12V)
    TOHNICHI Mfg Battery pack (DC12V)
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$329.90
    Min. 7 days
  40. Adapter for power torque tool
    TOHNICHI Mfg Adapter for power torque tool
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$38.99
    Min. 7 days
View : Grid List
Filter

Items 1 - 40 of 179

Set Ascending Direction