All Category

Torque Wrench Testers

A torque wrench tester is an instrument that calibrates the torque wrench value and actual torque. Analog and digital measurements can be made for each product. When using a torque wrench, accurate torque management is necessary to prevent bolts from loosening and to prevent bolts from rupturing due to overtightening. By using a torque wrench tester, the accuracy of the tool can be confirmed, and troubles caused by incorrect values during work can be prevented. The size of the torque wrench that can be measured and the magnitude of the torque will change depending on the product, so choose the one that you purchase according to the torque wrench you want to calibrate.
View : Grid List
Filter

Items 1 - 40 of 56

Set Ascending Direction
  1. Electric torque unit
    SHIMPO (NIDEC-SHIMPO) Electric torque unit
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$8,699.00
    Min. 5 days
  2. Handy Digitorque
    TONE Handy Digitorque
    A digital torque measuring instrument that is used by attaching it between manual handles such as ratchet handles and spinner handles and sockets. Two types of measurement modes (peak mode and track mode) can be switched. Corresponds to both left and right rotation directions. Equipped with an ov... Read More
    Operating Temperature Range (℃)  5~42  Overall Length (mm)  75  Specification  Load direction (right, left)  Accuracy (%)  ±3 
    Rating:
    88%
    from S$189.90
    Min. 2 days
  3. Digital Torque Adapter
    MonotaRO Digital Torque Adapter
    A digital torque measuring instrument that is used by attaching it between manual handles such as ratchet handles and spinner handles and sockets. For inspection and tightening * Do not use for any other purpose.
    Operating Ambient Temperature (℃)  -10~60  Overall Length (mm)  75 
    Rating:
    85%
    from S$139.90
    Min. 2 days
  4. Torque gauge with front needle
    TOHNICHI Mfg Torque gauge with front needle
    The tip is a three-claw chuck. * For products with calibration documents and traceability system diagrams, we can only accept orders on the web. * Products with proofreading cannot be canceled after ordering. * Products that include (with traceability system diagram) in the product number will be... Read More
    from S$589.90
    Min. 2 days
  5. Torque Checker
    TONE Torque Checker
    You can check the torque wrench on a daily basis before and after work with a simple operation. The LED display makes it easy to read the values without error. You can switch between three types of measurement modes (track mode, peak mode, and peak hold mode). Supports various insertion angles an... Read More
    Storage Temperature Range (℃)  -20~70  Power Input (V)  100~240  Operating Temperature Range (℃)  5~40  Measurement Method  Clockwise direction (clockwise)  Measurement Mode  Track mode / peak mode / peak hold mode 
    from S$1,399.00
    Min. 2 days
  6. Torque Meter
    HIOS Torque Meter
    The memory function allows you to store and manage torque data. (With 100 data memory) The Ave measurement function allows you to check the maximum (Max), minimum (Min), and average (Ave) torque values. Zero adjustment is performed automatically when the power is turned on. The first peak mode (F... Read More
    Recharging Time  1,000mA (within 6 hours)  Mass (kg)  1.8  Dimension (mm)  230(W)×124(D)×65.2(H)  Continuous Operating Time  About 8 hours  Service Life  Approximately 300 rechargeable times  Measurement Mode  Track, peak, first peak  Accuracy  Within ± 0.5% (FS) 
    from S$2,699.00
    Min. 2 days
  7. Torque gauge
    TOHNICHI Mfg Torque gauge
    The tip is a three-claw chuck. For verification of minute torque and torque equipment. * For products with calibration documents and traceability system diagrams, we can only accept orders on the web. * Products with proofreading cannot be canceled after ordering. * Products that include (with tr... Read More
    Mass (kg)  0.18 
    Rating:
    20%
    from S$499.90
    Min. 3 days
  8. Torque meter
    TOHNICHI Mfg Torque meter
    * For products with calibration documents and traceability system diagrams, we can only accept orders on the web. * Products with proofreading cannot be canceled after ordering. * Products that include (with traceability system diagram) in the product number will be shipped with the manufacturer&... Read More
    from S$1,999.00
    Min. 5 days
  9. Torque gauge
    TOHNICHI Mfg Torque gauge
    The tip is a three-claw chuck. * For products with calibration documents and traceability system diagrams, we can only accept orders on the web. * Products with proofreading cannot be canceled after ordering. * Products that include (with traceability system diagram) in the product number will be... Read More
    Mass (kg)  0.52 
    from S$589.90
    Min. 5 days
  10. Torque meter with needle
    TOHNICHI Mfg Torque meter with needle
    TME analog type. * For products with calibration documents and traceability system diagrams, we can only accept orders on the web. * Products with proofreading cannot be canceled after ordering. * Products that include (with traceability system diagram) in the product number will be shipped with ... Read More
    from S$2,299.00
    Min. 18 days
  11. Digital torque meter
    SHIMPO (NIDEC-SHIMPO) Digital torque meter
    A digital torque meter that can measure and digitally display the opening and closing force of the caps of containers for cosmetics, pharmaceuticals, beverages, foods, etc. The work is easily fixed and measured with four claws. * For products with calibration documents and traceability system dia... Read More
    Dimensions, H x W x D (mm)  126×227×320  Included Accessories  USB cable, AC adapter  Power Supply  USB cable, AC adapter (AC100-240V)  Data Output  USB1.1  Accuracy  ±0.5%F.S.  Rated torque (Nm)  Mass (kg) 
    from S$3,399.00
    Min. 2 days
  12. Screw cap tester
    IMADA Screw cap tester
    High-speed sampling allows you to quantify without losing momentary force. The maximum value can be grasped accurately, and high reproducibility is also realized. The measured value can be drawn as a graph by connecting to a PC (via USB) and the attached software.
    Outer Dimensions (mm)  233×305×87  Battery operating time  8 hours (8 hours full charge)  Units of Measurement  Nm, Ncm (switchable)  Specification  Overload value: Rated about 200%  Sampling Speed  Up to 2000 times / sec  Accuracy  ±0.5%F.S.±1digit 
    from S$2,499.00
    Min. 47 days
  13. Torque sensor
    TOHNICHI Mfg Torque sensor
    A rotary torque sensor that can measure directly when tightening screws.
    RoHS directive (corresponding to 10 substances)  Correspondence  Specification  Rotary  Included Accessories  cable 
    from S$5,399.00
    Min. 7 days
  14. Torque Checker
    JAPAN INSTRUMENTATION SYSTEM Torque Checker
    You can measure the torque of an electric screwdriver and the torque of tools that require torque management. Since it has a built-in battery, it can be carried and used for the start-up inspection of electric screwdrivers in the factory, and the inspection results can be memorized for easy data ... Read More
    Mass (kg)  Main Unit Dimensions, Width W x Depth D x Height H (mm)  Case / 320 × 350 × 105 
    from S$2,199.00
    Min. 17 days
  15. Torque analyzer for electric screwdriver
    KANON (Nakamura Nfg.) Torque analyzer for electric screwdriver
    * For products with calibration documents and traceability system diagrams, we can only accept orders on the web. * Products with proofreading cannot be canceled after ordering. * Products that include (with calibration company implementation calibration certificate and traceability system diagra... Read More
    Minimum Display Value  0.1cN・m  Mass (kg)  1.1  Measuring Range  1.5~100cN・m  Length (mm)  110  Width (mm)  150  Trusco Part No.  250-3026  Height (mm)  38  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$1,599.00
    Min. 14 days
  16. Torque Sensor
    TOHNICHI Mfg Torque Sensor
    A fixed torque sensor that accurately detects various torques.
    RoHS directive (corresponding to 10 substances)  Correspondence  Specification  Fixed type  Included Accessories  cable 
    from S$2,199.00
    Min. 7 days
  17. Micro torque meter
    TOHNICHI Mfg Micro torque meter
    Torque meter for measuring minute torque (7.5mN ・ m). * For products with calibration documents and traceability system diagrams, we can only accept orders on the web. * Products with proofreading cannot be canceled after ordering. * Products that include (with traceability system diagram) in th... Read More
    Minimum Torque (cNm)  0.0  Mass (kg)  0.3 
    from S$1,399.00
    Min. 5 days
  18. CEDAR rotational torque meter
    Sugisaki Meter CEDAR rotational torque meter
    Measures the starting torque of rotation and the load torque during rotation of the rotating body (does not rotate by itself, does not have power) Measured by a high-precision geared motor and strain gauge Built-in sensor that measures the load fluctuation of the rotating body while the output sh... Read More
    Input Power  AC100V~240V  Display  LCD 4-digit digital display 
    from S$2,999.00
    Min. 5 days
  19. Line checker
    TOHNICHI Mfg Line checker
    With simple operation, quick check can greatly reduce the measurement time. It is equipped with a pass / fail judgment function that allows you to see the check results at a glance. Checking torque wrenches on the line side and in the field. * For products with calibration documents and traceabil... Read More
    Power Supply  AC100-240V 50 / 60Hz automatic shift  Zero adjustment range  Auto key by C key, power OFF / ON  Measurement Mode  PEAK/RUN  Data Output  RS232C compliant  Measuring Accuracy  ±1%+1dgt 
    from S$2,999.00
    Min. 5 days
  20. UFT-SP series torque checker
    URYU SEISAKU UFT-SP series torque checker
    Simple checker for shut-off tool. By checking the torque signal when the tool shuts off, it is possible to measure whether the tool used has reached the set torque. The torque checker uses flood control, and the "oil amount confirmation window" can prevent measurement errors due to lack... Read More
    from S$879.90
    Min. 5 days
  21. Digital torque wrench tester
    TOHNICHI Mfg Digital torque wrench tester
    Fully automatic torque wrench tester for high precision centralized management system. Automatic measurement, automatic judgment, and data processing are possible.
    RoHS directive (corresponding to 10 substances)  Correspondence  Measuring Direction  Left and right  Accuracy (%)  ±1+1digit 
    from S$69,990.00
    Min. 7 days
  22. Digital torque tester UDT-25
    URYU SEISAKU Digital torque tester UDT-25
    The compact design of the torque measurement unit and torque display unit makes it easy to carry. It uses a nickel-metal hydride battery as the drive source and can be fully charged in 4 hours. It can be used for 14 hours after being fully charged. Torque can be measured not only by rotating cloc... Read More
    Mass (kg)  About 2.3  Operation Ambient Temperature (℃)  10~40  Dimensions, Width W x Depth D x Height H (mm)  Approx. 190 x approx. 180 x approx. 59  Display Unit  N・m  Ambient Humidity to Use  20-80% (non-condensing)  Power Supply  Built-in nickel, hydrogen battery  Accuracy  (Rated output) ± 0.5% RO 
    from S$3,699.00
    Min. 5 days
  23. Verification device
    TOHNICHI Mfg Verification device
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$3,599.00
    Min. 7 days
  24. Torque sensor for M type
    TOHNICHI Mfg Torque sensor for M type
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$1,599.00
    Min. 7 days
  25. Torque wrench tester
    TOHNICHI Mfg Torque wrench tester
    DOTE analog type. Scale direct reading type torque wrench tester. * For products with calibration documents and traceability system diagrams, we can only accept orders on the web. * Products with proofreading cannot be canceled after ordering. * Products that include (with traceability system dia... Read More
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$3,299.00
    Min. 7 days
  26. Reaction unit
    TOHNICHI Mfg Reaction unit
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$499.90
    Min. 7 days
  27. ST type spin torque
    TOHNICHI Mfg ST type spin torque
    Equipped with an angle measurement function, it supports rotation angle tightening. Checks torque and angle without removing the nut runner from the multi-axis tightening device. For the Bluetooth model, you can also create a torque / angle graph on your computer after tightening.
    Operating Temperature Range (℃)  0~40  Angle Measuring Range (°)  0~±999  Mass (kg)  1.3  Recharging Time (hours)  Data Memory  999 data  RoHS directive (corresponding to 10 substances)  Correspondence  Measuring Direction  Left and right  Power Supply  Nickel metal hydride battery pack  Data Output  USB output  Accuracy (%)  ±1+1digit 
    from S$4,699.00
    Min. 7 days
  28. Digital torque wrench analyzer
    KANON (Nakamura Nfg.) Digital torque wrench analyzer
    Since it is a digital type that directly reads the torque value, the reading error is zero. The angle of the display unit can be changed within the range of 70 ° behind. Data can be managed by connecting the digital display to a personal computer. Easy to operate by anyone. Accuracy is guaranteed... Read More
    Operating Temperature  5~35℃  Power Input (V)  AC100~240(50/60Hz)  RoHS directive (corresponding to 10 substances)  Correspondence  Display  LCD dot matrix  Mode  TRACK P.A P.B  Accuracy  ±1%+1digit 
    from S$3,299.00
    Min. 5 days
  29. Digital torque adapter
    TASCO Digital torque adapter
    * Ratchet handle and socket are not included.
    from S$199.90
    Min. 6 days
  30. Digital torque wrench analyzer
    KANON (Nakamura Nfg.) Digital torque wrench analyzer
    Since it is a digital type that directly reads the torque value, the reading error is zero. The display characters are large and easy-to-read LEDs are used. The display surface is easy to read. 50 ° tilted accuracy guarantees ± 1% + 1digit. The operation mode can be switched according to the type... Read More
    Torque Measurement Range (Nm)  (Left and right) 5 to 200  Minimum Reading  0.1N・m  Square Drive (mm)  14 hexagons  Minimum Torque (Nm)  200  Maximum Torque (Nm)  Power Input (V)  AC100~240  RoHS directive (corresponding to 10 substances)  Correspondence  Display  LCD dot matrix  Accuracy  ±1%+1digit 
    from S$2,799.00
    Min. 5 days
  31. Digital torque tester
    URYU SEISAKU Digital torque tester
    Since it has a built-in battery, it can be carried to the inspection location and is ideal for the pulse tool start-up inspection on the factory line. It can also be used with an AC power supply. It can operate continuously for about 10 hours with only the battery. It will be fully charged in abo... Read More
    Accuracy  (Rated output) ± 0.5% RO  Power Supply Voltage  100 to 240 VAC or built-in NiCd battery  Operation Ambient Temperature (℃)  10~40  Ambient Humidity to Use  20-80% (non-condensing)  Display Unit  N・m 
    from S$8,999.00
    Min. 5 days
  32. Rotation assist jig for DTX
    IMADA Rotation assist jig for DTX
    A manual rotation assist jig exclusively for the torque gauge DTXS / DTXA series. By continuing to rotate the knob, the measurement sample rotation can be continuously measured. By combining with an attachment that matches the sample, various torque can be measured as a simple tester. For models... Read More
    Mass (g)  1181  Maximum Torque (Nm)  RoHS directive (corresponding to 10 substances)  Correspondence  Type  Standard type 
    from S$899.90
    Min. 28 days
  33. 25.4sq. Digital torque checker
    KTC 25.4sq. Digital torque checker
    from S$9,899.00
    Min. 5 days
  34. Digital Torque Meter
    AS ONE Digital Torque Meter
    It is possible to measure the caps, lids and screws of various containers such as beverages and pharmaceuticals, the closing torque, and the tightening force of valves with high accuracy. The TNP series can import data to a computer via USB (software can be downloaded from the manufacturer's ... Read More
    Display Range  0.000~±2.000N・c/0.0~±200.0N・b  Measurement Range  0.000~±2.000N・m  Resolution  0.001N・c/0.1N・b  Rated torque (Nm)  Dimension (mm)  320×227×126  Mass (kg) 
    from S$2,899.00
    Min. 15 days
  35. CEDAR sliding torque detector
    Sugisaki Meter CEDAR sliding torque detector
    Perform a retightening test and catch the point (1 to 3%) that slides out from the point where it is tightened. Determine the torque value. It is driven by a motor for smooth tightening work. If it is judged, the motor will stop, so There is no need to retighten the overtorque or loosening torque... Read More
    Display  LCD 4-digit digital display  Measuring Direction  CW-CCW (right / left)  Automatic Power Off  Turn off after 10 minutes 
    from S$2,999.00
    Min. 5 days
  36. Torque Checker
    TASCO Torque Checker
    from S$2,199.00
    Min. 6 days
  37. Pin Chuck 4pcs Set
    SHIMPO (NIDEC-SHIMPO) Pin Chuck 4pcs Set
    Torque meter chuck pin
    RoHS directive (corresponding to 10 substances)  Correspondence  Compatible Products  Replacement chuck pin for TNX, TNP, TNJ 
    from S$159.90
    Min. 2 days
  38. Tester
    URYU SEISAKU Tester
    Prevents insufficient tightening during work. You can easily switch between soft and hard joint rates (elasticity) with an external switch. Easy to read with digital display. You can easily switch between torque display and axial force display. You can easily move the decimal point of the display... Read More
    from S$4,699.00
    Min. 5 days
  39. Verification device
    TOHNICHI Mfg Verification device
    RoHS directive (corresponding to 10 substances)  Correspondence  Suitable Model  TDT60CN、TDT60CN2、TDT60CN3 
    from S$989.90
    Min. 7 days
  40. Wide and lightweight table for HTG
    IMADA Wide and lightweight table for HTG
    Wide and lightweight table for torque gauge HTGA / HTGS / eHT series and manual rotation assist jig SDT series. A small sample with a diameter of 10 to 100 mm can be fixed. The fixing pin can be selected, and it supports various samples such as volume dials, motors, bottle-shaped containers, and ... Read More
    RoHS directive (corresponding to 10 substances)  Correspondence  Set Contents  Wide and lightweight table, fixing pin 
    from S$899.90
    Min. 28 days
View : Grid List
Filter

Items 1 - 40 of 56

Set Ascending Direction