All Category

Angle Clamps / Corner Clamps

View : Grid List
Filter

33 Item(s)

Set Ascending Direction
  1. Corner Clamp Aluminum
    MonotaRO Corner Clamp Aluminum
    This is convenient when fixing at 90 ° such as a panel. * Do not use for anything other than its intended purpose.
    Depth D (mm)  100  Height H (mm)  105  Overall Length (mm)  208  Maximum Jaw Opening (mm)  75  Mass (g)  About 194  Material (Main Unit)  Aluminum alloy  Type  Angle clamp / corner clamp 
    Rating:
    84%
    from S$13.99
    Min. 2 days
  2. Corner clamp
    STAR ELECTRIC MANUFACTURING (SUZUKID) Corner clamp
    It can be fixed at right angles or vertically. Clamp for fixing and right-angled material
    Mass (kg)  1.1  Dimensions, Width W x Height H x Depth D (mm)  200×200×60 
    Rating:
    96%
    from S$49.99
    Min. 2 days
  3. For clamp angle
    MonotaRO For clamp angle
    It is made of cast iron and has a weight of 3.7 kg, and it can be firmly fixed, so it is excellent in workability. A clamp that is convenient for temporary fixing of materials and welding. For welding of square lumber, L-shaped angles, pipes, etc. * Please refrain from using it for any other purp... Read More
    Tightening force (kN)  10  Mass (kg)  3.7  Maximum Jaw Opening (mm)  90  Dimensions, Width W x Height H x Depth D (mm)  About 204 × 204 × 60  Type  Angle clamp / corner clamp  Material  Cast iron  Material (Main Unit)  FCD450 
    Rating:
    88%
    from S$229.90
    Min. 2 days
  4. Corner clamp
    wolfcraft Corner clamp
    The corner clamp can easily and quickly fix the frame such as a shelf or a small cupboard at a 90 degree angle. Screws and adhesive board mounting aids can be fixed at 90 degrees. For corners and T-joints. You can do it with one hand. It supports both perforation and screwing, and plates of diffe... Read More
    Type  Angle clamp / corner clamp  Maximum Jaw Opening (mm)  22 
    Rating:
    80%
    from S$39.99
    Min. 2 days
  5. Corner clamp
    ESCO Corner clamp
    Mass (g)  1500  Base Dimensions (mm)  207×150×52(H)  Maximum Jaw Opening (mm)  75  Type  Angle clamp / corner clamp  Material (Main Unit)  Cast aluminum  Esco Part No.  EA526CA-1 
    Rating:
    80%
    from S$129.90
    Min. 2 days
  6. 2 piece corner clamp
    H&H 2 piece corner clamp
    Ideal for making picture frames, panels, etc.! Easy to cut at 45 degrees, glue at right angles, and nail at right angles. Made of plastic that does not damage the material
    Maximum Jaw Opening (mm)  70 
    Rating:
    80%
    from S$24.99
    Min. 2 days
  7. 70mm corner clamp
    ESCO 70mm corner clamp
    Base Dimensions (mm)  210×95×23(H)  Maximum Jaw Opening (mm)  70  Material (Main Unit)  Aluminum alloy  Type  Angle clamp / corner clamp  Esco Part No.  EA526CA-8 
    from S$34.99
    Min. 2 days
  8. Angle clamp
    TRUSCO Angle clamp
    Dedicated to right-angle fixed welding of steel materials. Since the sides and bottom are mechanically polished, it can be processed more accurately. An epoch-making clamp that enables speedy welding for temporary fixing and mounting. Ideal for fixing square and round pipes at right angles, weldi... Read More
    Type  Angle clamp / corner clamp  Material (Main Unit)  Ductile cast iron 
    from S$269.90
    Min. 2 days
  9. Corner clamp
    H&H Corner clamp
    Ideal for making picture frames, panels, etc.! Easy to cut at 45 degrees, glue at right angles, and nail at right angles. Made of light and durable aluminum alloy
    Maximum Jaw Opening (mm)  75 
    from S$15.99
    Min. 2 days
  10. Angle clamp (WSM type)
    BESSEY Angle clamp (WSM type)
    For right-angle fixed welding of steel materials. An epoch-making clamp that can be easily fixed at 90 degrees even with materials with different external dimensions, and can be quickly welded for temporary fixing and mounting. Rounded pipes with different external dimensions and the same dimensi... Read More
    Type  Angle clamp / corner clamp  Material (Main Unit)  Cast iron 
    from S$299.90
    Min. 2 days
  11. Otis one hand clamp
    stax tools Otis one hand clamp
    Even women and children can firmly grasp (clamp).
    Type  Bar clamp 
    from S$46.99
    Min. 2 days
  12. Solid angle clamp
    TRUSCO Solid angle clamp
    Dedicated to right-angle fixed welding of steel materials. Since the sides and bottom are mechanically polished, it can be processed more accurately. An epoch-making clamp that enables speedy welding for temporary fixing and mounting. Ideal for fixing square and round pipes at right angles, weldi... Read More
    Mass (kg)  11  Trusco Part No.  366-9408  Type  Angle clamp / corner clamp  Material (Main Unit)  Ductile cast iron 
    from S$799.90
    Min. 3 days
  13. 70mm corner clamp (aluminum alloy)
    ESCO 70mm corner clamp (aluminum alloy)
    Base Dimensions (mm)  213×153×57(H)  Maximum Jaw Opening (mm)  70  Material (Main Unit)  Aluminum alloy  Type  Angle clamp / corner clamp  Esco Part No.  EA526CA-1A 
    from S$169.90
    Min. 4 days
  14. Powerful corner clamp
    ESCO Powerful corner clamp
    Base Dimensions (mm)  220×220×63(H)  Maximum Jaw Opening (mm)  85  Type  Angle clamp / corner clamp  Material (Main Unit)  Cast iron  Esco Part No.  EA526CA-2 
    from S$379.90
    Min. 4 days
  15. Corner clamp with angle cut
    H&H Corner clamp with angle cut
    Ideal for making picture frames, panels, etc.! If you adjust it to the scale, you can cut it freely to 45 degrees 60 degrees 90 degrees. Made of light and durable aluminum alloy
    Maximum Jaw Opening (mm)  75 
    from S$32.99
    Min. 3 days
  16. 110mm corner clamp (strong type)
    ESCO 110mm corner clamp (strong type)
    Maximum Jaw Opening (mm)  110  Base Dimensions (mm)  260×260×87(H)  Type  Angle clamp / corner clamp  Material (Main Unit)  Cast iron  Esco Part No.  EA526CA-2A 
    from S$589.90
    Min. 63 days
  17. Angle clamp
    TRUSCO Angle clamp
    Dedicated to right-angle fixed welding of steel materials. Since the sides and bottom are mechanically polished, it can be processed more accurately. An epoch-making clamp that enables speedy welding for temporary fixing and mounting. Ideal for fixing square and round pipes at right angles, weldi... Read More
    Type  Angle clamp / corner clamp  Material (Main Unit)  Ductile cast iron 
    from S$679.90
    Min. 2 days
  18. 4012 SquareClampKit
    Milescraft 4012 SquareClampKit
    Used for creating right-angled corners and fixing adhesives for boxes, shelves, drawers, frames, etc. Dedicated fixed clamps (2) are standard equipment. You can use it immediately. Can be fixed on either the inside or outside of the right-angled corner. Since it is not made of metal, it will not ... Read More
    from S$129.90
    Min. 13 days
  19. Corner clamp (automatic adjustment type)
    ESCO Corner clamp (automatic adjustment type)
    Clamp part can rotate
    from S$1,199.00
    Min. 4 days
  20. 4011 8 "Clamp Squares"
    Milescraft 4011 8 "Clamp Squares"
    Used for creating right-angled corners of boxes, shelves, drawers, etc. and fixing adhesives. It can be used on either the inside or outside of the right-angled corner. Since it is not made of metal, it will not damage the workpiece material. 8-inch model
    Dimensions (cm)  20×20×4  Mass (g)  460 
    from S$53.99
    Min. 13 days
  21. 253 Lockwood --corner clamp
    stax tools 253 Lockwood --corner clamp
    Easy to fix because it is a spring type. World's first! Can be used with 1-by and 2-by materials. We are particular about springs and adopt expensive German products. Achieved exquisite power adjustment. Can also be used to fix the middle plate
    Mass (g)  100  Dimension (mm)  100×90×60 
    from S$16.99
    Min. 13 days
  22. Corner clamp Automaxx specifications
    kreg Corner clamp Automaxx specifications
    It is a convenient clamp for making pocket hole joints. Wood of the same thickness can be clamped at right angles. With Automaxx technology, you can tighten by simply grasping without setting the thickness in advance. You can adjust the tightening strength with the screw at hand. For DIY and shel... Read More
    Mass (kg)  0.7  Warranty Period  1 year  Body Dimensions (W x D x H) (cm)  13×33×3  Material  Steel 
    from S$119.90
    Min. 7 days
  23. 4010 4 "Clamp Squares"
    Milescraft 4010 4 "Clamp Squares"
    Used for creating right-angled corners of boxes, shelves, drawers, etc. and fixing adhesives. It can be used on either the inside or outside of the right-angled corner. Since it is not made of metal, it will not damage the workpiece material. 4-inch model
    Dimensions (cm)  10×10×4  Mass (g)  220 
    from S$29.99
    Min. 13 days
  24. Corner Clamp Single Handle Type
    MonotaRO Corner Clamp Single Handle Type
    Since it is a single hand type, work efficiency is high. It is lightweight because it is made of aluminum alloy. Workpieces with different thicknesses can be fixed because the handle can move freely. For temporary fixing in DIY work and woodworking work. * Do not hit the handle or body with a ham... Read More
    Overall Length (mm)  288  Jaw Depth (mm)  35  Maximum Jaw Opening (mm)  68  Mass (g)  730  Material (Main Unit)  Aluminum alloy  Type  Angle clamp / corner clamp  Surface Treatment  Powder coating (powder coating) 
    Rating:
    80%
    from S$24.99
    Min. 2 days
  25. Corner Clamp
    KANZAWA WORKS Corner Clamp
    For temporary fixing when fixing square timbers at right angles. Ideal for temporary fixing when adhering window frames and door frames.
    Mass (g)  1000  Effective dimension (mm)  10~110  Material (Main Unit)  Aluminum die-cast  Type  Angle clamp / corner clamp 
    Discontinued
  26. Vice
    Sanyo Seiko Vice
    The tightening direction of the timber can be selected from either left or right, and it can be used according to the work space. The timber will not be scratched and can be securely adhered and fixed. It can be placed on a workbench and used as a corner clamp. Tightening work can be done almost ... Read More
    Mass (kg)  1.05  Jaw Opening (mm)  150 
    Discontinued
  27. Large corner clamp
    Sanyo Seiko Large corner clamp
    jaw open width (mm)  110  jaw width (mm)  35  jaw depth (mm)  45 
    Discontinued
  28. Fixed angle clamp WSM
    BESSEY Fixed angle clamp WSM
    Discontinued
  29. Aluminum corner clamp
    trad Aluminum corner clamp
    For picture frames, panels and other work! Easy and convenient for fixing 90 ° of frames such as picture frames and panels! For right-angle nailing, stapler, and adhesion! For cutting at right angles and 45 °
    Main Unit Dimensions, Width W x Depth D x Height H (mm)  210×24×95  Mass (g)  200  Maximum Jaw Opening (mm)  75 
    Rating:
    90%
    Discontinued
  30. Corner clamp
    Sanyo Seiko Corner clamp
    Discontinued
  31. Fixed angle clamp WVS
    BESSEY Fixed angle clamp WVS
    Trusco Part No.  104-5288 
    Discontinued
  32. Corner clamp
    PAOCK Corner clamp
    Convenient for fixing 90 ° of frames such as picture frames and panels For picture frames, panels, and other work
    Mass (g)  200  Overall Width (mm)  210  Thickness (mm)  24  Maximum Jaw Opening (mm)  75  Overall Length (mm)  95  Material  Aluminum die casting 
    Rating:
    87%
    Discontinued
  33. Corner clamp
    BIGMAN Corner clamp
    For the production of foreheads, panels, doll cases, etc.
    Type  Angle clamp / corner clamp  Mass (g)  236 
    Discontinued
View : Grid List
Filter

33 Item(s)

Set Ascending Direction