All Category

Rebar Cutters

View : Grid List
Filter

Items 1 - 40 of 41

Set Ascending Direction
  1. Up type rebar cutter with universal bender
    HIT Up type rebar cutter with universal bender
    Reinforcing bars up to 13 mm can be cut and bent. When bending, the handle direction is from bottom to top. For cutting and bending reinforcing bars.
    Mass (g)  10500 
    from S$559.90
    Min. 3 days
  2. Enapak manual cutter with built-in hydraulic pump
    ENERPAC Enapak manual cutter with built-in hydraulic pump
    It is a single-acting spring return type. It has a built-in hydraulic pump. Easy to operate with guillotine cutting. The receiving blade side can be opened with a simple operation. * Please read the instruction manual for safety when using.
    Material  Steel  Maximum Operating Pressure (MPa)  70 
    from S$2,999.00
    Min. 32 days
  3. Hoop Iron Cutter
    HIT Hoop Iron Cutter
    It can easily cut steel straps that cannot be cut with conventional steel strap cutters. Ideal for cutting iron plates, tinplates, baling hoops, and other steel straps for packing.
    from S$58.99
    Min. 2 days
  4. Band iron cutter
    TRUSCO Band iron cutter
    The blade angle is easy to insert into the narrow gap of the band and has good workability. Ideal for cutting iron plates, tin plates, bering hoops, packing strips, and polypropylene bands. Ideal for cutting iron plates for packing such as iron plates, tin plates, and bering hoops. * When cutting... Read More
    Rating:
    100%
    from S$68.99
    Min. 2 days
  5. Full screw cutter
    MCC Full screw cutter
    A lightweight, power-free manual tool that can be used anywhere. The cut end is clean without crushing threads or burrs, so the cut bolt can be used as it is. Spare blade type
    from S$339.90
    Min. 2 days
  6. Tile Cutter B Type
    Miki Giken Tile Cutter B Type
    * Hard tiles, porcelain tiles, etc. cannot be cut.
    Specification  With cemented carbide 
    Rating:
    47%
    from S$29.99
    Min. 2 days
  7. Rebar cutter
    MCC Rebar cutter
    Designed with an emphasis on stability, sharpness, ease of use, and durability.
    Material  Special steel 
    from S$219.90
    Min. 3 days
  8. Rebar cutter
    MCC Rebar cutter
    Designed with an emphasis on stability, sharpness, ease of use, and durability. Stable malleable cast iron base steel pipe handle, The special steel blade, which has both sharpness and durability, makes work efficiency much easier and faster. Material to be cut / Steel bar for reinforced concrete... Read More
    from S$399.90
    Min. 4 days
  9. Super high blade
    IKURA SEIKI Super high blade
    from S$139.90
    Min. 2 days
  10. All screw cutter blade
    MCC All screw cutter blade
    from S$99.90
    Min. 2 days
  11. Obi iron cutter sliding striker
    HIT Obi iron cutter sliding striker
    The cutting edge can be smoothly inserted by hitting the tightly tightened iron band with a striker. You can easily cut even iron strips that cannot be cut with conventional iron strip cutters. The handle expands and contracts. Ideal for cutting iron plates for packing such as iron plates, tin pl... Read More
    Material  Handle: Steel, Blade: Special steel  Remark  Integrated type 
    from S$439.90
    Min. 4 days
  12. Medium size iron cutter
    HIT Medium size iron cutter
    A spare blade for SS450.
    Suitable Model  SC450  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$98.99
    Min. 6 days
  13. Spare blade for band cutter
    TRUSCO Spare blade for band cutter
    The blade angle is easy to insert into the narrow gap of the band and has good workability. Ideal for cutting iron plates, tin plates, bering hoops, packing strips, and polypropylene bands. Ideal for cutting iron plates for packing such as iron plates, tin plates, and bering hoops. * When cutting... Read More
    Suitable Model  TSSC-460 
    Rating:
    60%
    from S$87.99
    Min. 2 days
  14. Rebar cutter no.0 spare blade
    MCC Rebar cutter no.0 spare blade
    Suitable for  RC-0000 
    from S$129.90
    Min. 4 days
  15. Rebar cutter with universal bender
    HIT Rebar cutter with universal bender
    The hit universal rebar cutter with bender is an excellent model with both cutting ability and bender function (bending process). Since the pipe diameter of the handle is large, there is little deflection and it is easy to cut.
    from S$559.90
    Min. 5 days
  16. Boosting Zungiri Cutter  Spare blade
    JEFCOM (DENSAN) Boosting Zungiri Cutter Spare blade
    A set of 2 spare blades that can be attached to the boosting power Zungiri cutter (ZCB-38M) to cut M10 Zungiri bolts. * Cannot be used as a replacement blade for the old type ZCB-38.
    from S$109.90
    Min. 3 days
  17. Spare blade (for EA545BP, EA858BS)
    ESCO Spare blade (for EA545BP, EA858BS)
    from S$119.90
    Min. 3 days
  18. Refill blade with rebar cutter universal bender
    HIT Refill blade with rebar cutter universal bender
    Replacement blade for RC13BN and RC13BR.
    Suitable Model  RC13BN、RC13BR  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$299.90
    Min. 4 days
  19. Rebar cutter
    KNIPEX Rebar cutter
    It is possible to cut workpieces up to HRC48. A special rubber is sandwiched between the joint stoppers to soften the impact during cutting. The ergonomic shape reduces work fatigue. Precise adjustment (12 steps) and readjustment are possible with eccentric bolts. By optimally adjusting the cutti... Read More
    Mass (g)  4110  Cutting Capacity (Φmm)  (HRC19)11.0、(HRC40)9.0、(HRC48)6.0 
    from S$439.90
    Min. 3 days
  20. Boosting Zungiri Cutter  Spare blade
    JEFCOM (DENSAN) Boosting Zungiri Cutter Spare blade
    Spare blade for boosting power cutter (ZCB-38M)
    from S$119.90
    Min. 3 days
  21. Cut bender spare blade
    MCC Cut bender spare blade
    Rating:
    100%
    from S$249.90
    Min. 4 days
  22. 11mm / 950mm rebar cutter
    ESCO 11mm / 950mm rebar cutter
    from S$459.90
    Min. 3 days
  23. Full Threaded Bolt Cutter
    JAPPY Full Threaded Bolt Cutter
    A manual tool that does not damage the screw thread, does not require the trouble of removing clean cutting burrs and burrs, does not generate noise and chips, and does not require a power supply. Can be used for cutting mild steel and stainless steel (replacement blade sold separately)
    from S$299.90
    Min. 2 days
  24. Super blade
    IKURA SEIKI Super blade
    Bolt  M6×25 
    from S$139.90
    Min. 5 days
  25. Refill blade with rebar cutter universal bender
    HIT Refill blade with rebar cutter universal bender
    A spare blade for RC16BR.
    Suitable Model  RC16BN  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$389.90
    Min. 4 days
  26. Spare blade (for EA545KA-38)
    ESCO Spare blade (for EA545KA-38)
    from S$299.90
    Min. 3 days
  27. Full Threaded Screw Cutter Spare Blade SUS
    JAPPY Full Threaded Screw Cutter Spare Blade SUS
    For SUS W3 / 8 only Can be used to replace the blade of all-screw bolt cutters
    Material (Blade)  Stainless steel cutting blade 
    from S$119.90
    Min. 2 days
  28. Full Threaded Screw Cutter Spare Blade
    JAPPY Full Threaded Screw Cutter Spare Blade
    For mild steel W3 / 8 only Can be used to replace the blade of all-screw bolt cutters
    Material (Blade)  Cutting blade for mild steel materials 
    from S$89.99
    Min. 2 days
  29. Rebar Cutter Manual Hydraulic
    ARM SANGYO Rebar Cutter Manual Hydraulic
    The blade is made of powdered high-speed steel and has a titanium coating film with excellent wear resistance. High-speed cutting of rebar with a diameter of 16 mm.
    As ONE Part Number  64-6549-69 
    from S$2,999.00
    Min. 7 days
  30. Spare blade for rebar cutter
    Mokuba Spare blade for rebar cutter
    Suitable Model  D-5 
    from S$189.90
    Min. 4 days
  31. Hand cut 162
    IKURA SEIKI Hand cut 162
    360 ° rotating head (no load). High-speed and low-speed automatic switching. Reinforcing bar cutting
    Specification  With pressure regulating valve  Maximum Cutting Capacity  D16 (SD345 equivalent) 
    from S$1,199.00
    Min. 5 days
  32. Cutter parts Central screw
    Mokuba Cutter parts Central screw
    from S$39.99
    Min. 6 days
  33. W3 / 8 ”/ 605mm full thread cutter & puncher
    ESCO W3 / 8 ”/ 605mm full thread cutter & puncher
    from S$749.90
    Min. 3 days
  34. Cutter replacement blade
    MCC Cutter replacement blade
    Discontinued
  35. DIAMOND hydraulic manual cutter
    IKK DIAMOND hydraulic manual cutter
    A manual hydraulic rebar cutter that does not require a power supply. The cutter head can rotate 360 degrees and can be used even in narrow spaces. Used when cutting rebar in the field
    Material  Plastic, iron 
    Discontinued
  36. Rebar cutter
    MCC Rebar cutter
    Discontinued
  37. Your Ash Douteckin Cutter
    HIT Your Ash Douteckin Cutter
    A hydraulic manual rebar cutter that can easily cut rebar up to 16 mm lightly. For cutting rebar.
    Specification  Number of cutting pumping: 17 times  Mass (g)  4000 
    Discontinued
  38. Ratchet full screw cutter
    MCC Ratchet full screw cutter
    Compact design that can be used anywhere. Designed for cutting all screw bolts on mild steel wire, but can also cut all screw bolts on stainless steel wire. Spare blade type
    Mass (g)  2300  Cutting Capacity  Mild steel / W3 / 8 
    Discontinued
  39. Super boost all screw cutter
    Sato Kiko Super boost all screw cutter
    Achieves epoch-making performance about 20 times (size 1 / 2.5, cutting force 8 times) compared to conventional products by the world patent "Sato's super boosting principle"! Compact, lightweight, no power supply required, and highly portable, making it ideal for work in high place... Read More
    Mass (g)  1.7  Magnification (times)  210 
    Discontinued
View : Grid List
Filter

Items 1 - 40 of 41

Set Ascending Direction