All Category

Hand Planes

View : Grid List
Filter

Items 1 - 40 of 278

Set Ascending Direction
  1. Kakuri Blade Replaceable Type Hand Planes for Hobby
    Kakuri Kakuri Blade Replaceable Type Hand Planes for Hobby
    It has a sharp sharpness and can be used for detailed work. A convenient plane that can be used by pushing or pulling. It can also be used for gypsum board.
    Blade Width (mm)  22  Main Unit Dimensions (mm)  28×90  Mass (g)  70  Material (Blade)  SK-5  Material (Main Unit)  Steel 
    Rating:
    84%
    from S$6.99
    Min. 2 days
  2. Mini Hand Plane
    Kakuri Mini Hand Plane
    Comes with a main blade hand-finished by a craftsman. The table uses domestic oak wood that has been naturally dried. The surface of boards and square lumber can be finished smoothly. For surface finishing of boards and square lumber.
    Material (Shorter Rule)  Oak  Blade Width (mm)  42  Material (Blade)  Carbon steel for cutting tools 
    Rating:
    83%
    from S$28.99
    Min. 2 days
  3. Hobby plane
    H2 Hobby plane
    Ideal for woodworking. Compact size that can be used easily. For chamfering and flat surface cutting.
    Rating:
    80%
    from S$11.99
    Min. 2 days
  4. Zaiku Rabbet Plane
    Umebachi Ryoma Zaiku Rabbet Plane
    A plane suitable for cutting grooves such as sill. It is used when cutting the sill and the groove of the lintel. For work.
    Height (mm)  180 
    Rating:
    100%
    from S$58.99
    Min. 2 days
  5. TOSHIZO Blade Replaceable Plane
    Kakuri TOSHIZO Blade Replaceable Plane
    Patented one-touch replaceable blade type. There is no need for troublesome blade sharpening, and there is no need to adjust the presser foot. The surface of boards and square lumber can be finished smoothly. For surface finishing of boards and square lumber.
    Material (Shorter Rule)  Oak  Material (Blade)  Carbon steel for cutting tools 
    Rating:
    80%
    from S$64.99
    Min. 2 days
  6. Kakuri Ebony Small Plane Flat No.1
    Kakuri Kakuri Ebony Small Plane Flat No.1
    A screw-type plane for work that makes it easy to adjust the blade. A plane with a width of 18 mm that can be used when cutting a flat surface. It is small and easy to hold, and the ebony material gives it a luxurious feel. It is for work that is ideal for detailed work using ebony as the materia... Read More
    Blade Width (mm)  18  Material (Blade)  Heiss  Material (Shorter Rule)  Kurodan  Case  Polypropylene  Included Accessories  Storage case 
    Rating:
    100%
    from S$43.99
    Min. 2 days
  7. Straightener
    Horai Straightener
    Repairing the whetstone ... "Anytime, anywhere" "Natural whetstone or artificial whetstone" is OK! Rough / medium whetstone / medium finish / finishing whetstone / natural / artificial whetstone can be easily repaired with paper.
    Size (mm)  100×400  Mass (g)  1700  Dimension (mm)  410×105×55 
    Rating:
    100%
    from S$76.99
    Min. 2 days
  8. Home sharpener
    Kakuri Home sharpener
    Mass (g)  460  Trusco Part No.  115-3972 
    Rating:
    100%
    from S$87.99
    Min. 2 days
  9. Chamfer plane for ALC (1-flute)
    ESCO Chamfer plane for ALC (1-flute)
    Esco Part No.  EA588DB-1 
    from S$129.90
    Min. 4 days
  10. Bean edge plane + right
    Daigoro Bean edge plane + right
    In the inner corner of the corner. A right plane that is convenient for scraping the bottom left corner because it is used with the right hand. For stepping finish of edges and kiwa.
    Blade Width (mm)  30  Mass (g)  211  Overall Length (mm)  182 
    from S$48.99
    Min. 6 days
  11. Hideaki
    Tsunesaburo Hideaki
    from S$399.90
    Min. 3 days
  12. 64mm planer
    ESCO 64mm planer
    Esco Part No.  EA588D-64 
    from S$129.90
    Min. 4 days
  13. Replaceable Blade Type Plane
    Kawayoshi Replaceable Blade Type Plane
    No matter who uses it, you can get the sharpness and luster of a master carpenter. If it stops cutting, just replace the blade and it will return to its original sharpness. Replacing the blade will improve work efficiency. Since there is no need for a grind, it is easier to use than conventional ... Read More
    Included Accessories  3 replacement blades 
    Rating:
    83%
    from S$119.90
    Min. 2 days
  14. Board canna
    Tajima (TJM DESIGN) Board canna
    Durable aluminum die-cast body The adjustment plate mechanism cutter that allows you to select the chamfer width in 4 steps is a cutter blade with a mounting angle of 30 ° that can use a large spare blade. 1.5 times sharper than 60 ° products Slippery fluorine coating processing Easy-to-grip roun... Read More
    Rating:
    73%
    from S$38.99
    Min. 2 days
  15. Marking Gauge with Screw
    Takagi Marking Gauge with Screw
    Screw type that makes it easy to adjust the marking width. For marking the processing line along the side of the work piece.
    from S$18.99
    Min. 2 days
  16. Kakuri Ebony Small Plane Angled Corner No.5
    Kakuri Kakuri Ebony Small Plane Angled Corner No.5
    A screw-type plane for work that makes it easy to adjust the blade. A crafting plane that can be used when taking a 45 degree surface at a corner. It is small and easy to hold, and the ebony material gives it a luxurious feel. It is for work that is ideal for detailed work using ebony as the mate... Read More
    Offset Angle (°)  45  Material (Blade)  Heiss  Material (Shorter Rule)  Kurodan  Case  Polypropylene  Included Accessories  Storage case 
    Rating:
    100%
    from S$44.99
    Min. 2 days
  17. Zaiku Flat Plane
    Umebachi Ryoma Zaiku Flat Plane
    A plane suitable for scraping flat surfaces. It is used when cutting a flat surface, a wood end, or a surface. For work.
    Width (mm)  55  Blade Width (mm)  42 
    Rating:
    80%
    from S$38.99
    Min. 2 days
  18. Small Rabbet Plane
    GISUKE (Takagi) Small Rabbet Plane
    Cut the sill and the ditch of the lintel.
    Rating:
    73%
    from S$48.99
    Min. 2 days
  19. No-mark Sashiri Kanna
    Kakuri No-mark Sashiri Kanna
    Shikii for fittings, etc. It can be used for digging a ditch in a lintel.
    Length (mm)  210  Material (Shorter Rule)  Oak  Width (mm)  50  Cutting Width (mm)  18  Material (Blade)  Carbon steel for cutting tools  Mass (g)  230  Height (mm)  60(30) 
    Rating:
    100%
    from S$33.99
    Min. 2 days
  20. No mark Waki Kanna
    Kakuri No mark Waki Kanna
    Suitable for finishing stepped edges and edges of fittings, etc.
    Material (Shorter Rule)  Oak  Cutting Width (mm)  12  Height (mm)  60(30)  Width (mm)  50  Mass (g)  300  Material (Blade)  Carbon steel for cutting tools  Length (mm)  205 
    Rating:
    100%
    from S$33.99
    Min. 2 days
  21. Chamfered Canna
    INOUE (Inouekougu) Chamfered Canna
    Dial type blade adjustment
    Size (mm)  140×35×20  RoHS directive (corresponding to 10 substances)  Correspondence  Material  With polycarbonate glass 
    from S$22.99
    Min. 2 days
  22. Japanese Hand Plane
    Mikiju Daikichi Japanese Hand Plane
    The surface of the wood is scraped and processed. A plane with steel that makes it easy to sharpen the blade. With steel. Shaving of the wood surface.
    Height (mm)  260  Mass (g)  800  Length (mm)  67  Blade Width (mm)  58  Width (mm)  70 
    Rating:
    100%
    from S$69.99
    Min. 2 days
  23. Zaiku Square Convex Bottom Plane
    Umebachi Ryoma Zaiku Square Convex Bottom Plane
    It is used when cutting a large curved surface. For work * The cutting edge is sharp, so do not touch it with your bare hands. * Do not use for anything other than its intended purpose (wood).
    Mass (g)  94  Blade Width (mm)  24  Width (mm)  36  Length (mm)  120  Height (mm)  35 
    Rating:
    100%
    from S$49.99
    Min. 2 days
  24. Mortise gauge
    Takagi Mortise gauge
    Two blades that can draw two lines at the same time. For marking the processing line along the side of the work piece. For marking inside holes.
    Rating:
    20%
    from S$21.99
    Min. 2 days
  25. Ceramic spare blade for hard chamfering canna
    Tajima (TJM DESIGN) Ceramic spare blade for hard chamfering canna
    Ceramic spare blade for chamfering plane Chamfering cutter for gypsum board Ceramic replacement blade * Because it is a knife, please handle it with care. * Please dispose of the bent blade after use. * Product specifications are subject to change without notice. Please note.
    Suitable for  TMK-KV45、TMK-KH45 
    from S$12.99
    Min. 2 days
  26. Zaiku Convex Bottom Plane
    Umebachi Ryoma Zaiku Convex Bottom Plane
    A plane suitable for cutting large curved surfaces. For work.
    Length (mm)  35  Mass (g)  120  Width (mm)  38  Blade Width (mm)  24  Height (mm)  120 
    Rating:
    93%
    from S$46.99
    Min. 2 days
  27. Kakuri Angled Corner Plane Blade Replacement
    Kakuri Kakuri Angled Corner Plane Blade Replacement
    A screw-type plane for work that makes it easy to adjust the blade. This product won the Japan DIY Show Minister of Trade Award. Kakuri Sangyo original representative product. An epoch-making replaceable blade type plane that can be chamfered at 45 degrees, 60 degrees, and 30 degrees. A crafting ... Read More
    Length (mm)  151  Material (Blade)  Carbon steel SK-5  Width (mm)  52  Material (Shorter Rule)  Oak  Height (mm)  23 
    from S$59.99
    Min. 2 days
  28. Hard chamfering canna V45
    Tajima (TJM DESIGN) Hard chamfering canna V45
    16 times more durable with ultra-durable ceramic blades for hard building materials Chamfering grinding tool for gypsum board * Because it is a knife, please handle it with care. * Please dispose of the bent blade after use. * Product specifications are subject to change without notice. Please no... Read More
    Chamfering  (Width) 1-3mm  chamfer angle (°)  45  Type  For decora, veneer, and cauldron  Replacement Blades  TMKB-C50, L type blade, J type blade 
    from S$58.99
    Min. 2 days
  29. Board Canna VH
    MURATEC-KDS Board Canna VH
    The chamfer width can be adjusted steplessly. Since it is a special resin containing glass fiber, it is slippery and highly durable. For chamfering and flat cutting of gypsum board.
    Blade Thickness (mm)  0.5  Blade Width (mm)  18  Overall Length (mm)  180  Dimensions, Vertical x Horizontal x Height (mm)  180×58×44mm  Mass (g)  247  Blade Length (mm)  50  2018 Trusco page  7 0059  Trusco Part No.  837-0751  Color  Yellow 
    from S$29.99
    Min. 2 days
  30. Hard chamfering canna H45
    Tajima (TJM DESIGN) Hard chamfering canna H45
    16 times more durable with ultra-durable ceramic blades for hard building materials Chamfering grinding tool for gypsum board * Because it is a knife, please handle it with care. * Please dispose of the bent blade after use. * Product specifications are subject to change without notice. Please no... Read More
    Chamfering  (Width) 1-3mm  chamfer angle (°)  45  Type  For decora, veneer, and cauldron  Replacement Blades  TMKB-C50, L type blade, J type blade 
    from S$58.99
    Min. 2 days
  31. Hobby Canna
    BIGMAN Hobby Canna
    Ultra-compact type that can be easily used for detailed work with sharp sharpness for both push and pull
    Blade Size (mm)  25  Mass (g)  91  Included Accessories  One replacement blade  Main Unit Size (mm)  Width 70 x depth 140 x height 30 
    Rating:
    30%
    from S$9.29
    Min. 2 days
  32. Kakuri Mini Single-Blade Plane
    Kakuri Kakuri Mini Single-Blade Plane
    Single-edged hobby plane.
    Mass (g)  145  Dimensions, Height x Width x Thickness (mm)  150×50×35  Dimension (mm)  40×140 
    from S$11.99
    Min. 2 days
  33. Kakuri Ebony Small Plane Inner Corner No.2
    Kakuri Kakuri Ebony Small Plane Inner Corner No.2
    A screw-type plane for work that makes it easy to adjust the blade. A plane for work that can be used when taking a rounded surface at the corner. It is small and easy to hold, and the ebony material gives it a luxurious feel. It is for work that is ideal for detailed work using ebony as the mate... Read More
    Material (Blade)  Heiss  Material (Shorter Rule)  Kurodan  Case  Polypropylene  Size  Included Accessories  Storage case 
    from S$43.99
    Min. 2 days
  34. Bean Square Convex Bottom Plane for Craftwork
    KIKUDOH Bean Square Convex Bottom Plane for Craftwork
    The hook stand has a spherical shape, and the inside of the spherical surface is scraped. * The brand has changed from Kikuo to Kikudo.
    Dimension (mm)  18 
    from S$49.99
    Min. 2 days
  35. Board canna
    Yamatani Works Board canna
    The sharpness of the blade is greatly improved with an acute angle of 30 °! It can cut even the surface paper of gypsum board. For chamfering gypsum board, wood, veneers, etc.!
    Mass (g)  180  Dimension (mm)  About width 180 x height 25 x depth 55  Replacement Blades  For each manufacturer cutter L type 
    from S$29.99
    Min. 2 days
  36. Board Canna 180 V45
    Tajima (TJM DESIGN) Board Canna 180 V45
    Economical replaceable blade type board plane with 4 levels of chamfer width Chamfering grinding tool for gypsum board * Because it is a knife, please handle it with care. * Please dispose of the bent blade after use. * Product specifications are subject to change without notice. Please note.
    chamfer angle (°)  45  Material (Main Unit)  Durable aluminum die-cast body  Finish Processing  Fluorine coating 
    from S$43.99
    Min. 2 days
  37. Ryuzo Mini Plane
    Kakuri Ryuzo Mini Plane
    The oak stand is used and the blade is made of steel, so you can check the sharpness.
    Cutting Width (mm)  36  Blade Width (mm)  42  Material (Shorter Rule)  Oak  Material (Blade)  Carbon steel for cutting tools 
    Rating:
    100%
    from S$29.99
    Min. 7 days
  38. Kakuri crafts for ebony beans
    Kakuri Kakuri crafts for ebony beans
    A screw-type plane for work that makes it easy to adjust the blade. An 18mm type plane for crafting that can be used when scraping concave surfaces. It is small and easy to hold, and the ebony material gives it a luxurious feel. It is for work that is ideal for detailed work using ebony as the ma... Read More
    Blade Width (mm)  18  Material (Blade)  Heiss  Material (Shorter Rule)  Kurodan  Case  Polypropylene  Included Accessories  Storage case 
    from S$53.99
    Min. 2 days
  39. Kakuri Ebony Small Plane Inner Corner No.4
    Kakuri Kakuri Ebony Small Plane Inner Corner No.4
    A screw-type plane for work that makes it easy to adjust the blade. A plane for work that can be used when taking a rounded surface at the corner. It is small and easy to hold, and the ebony material gives it a luxurious feel. It is for work that is ideal for detailed work using ebony as the mate... Read More
    Material (Blade)  Heiss  Material (Shorter Rule)  Kurodan  Size  Case  Polypropylene  Included Accessories  Storage case 
    Rating:
    100%
    from S$43.99
    Min. 2 days
  40. Spare blade for hobby plane
    H2 Spare blade for hobby plane
    For chamfering and flat surface cutting.
    from S$4.99
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 278

Set Ascending Direction