All Category

Kiri (Gimlet)

Other Related Pages

View : Grid List
Filter

Items 1 - 40 of 124

Set Ascending Direction
  1. Thousands of wooden patterns
    BIGMAN Thousands of wooden patterns
    For drilling, handicraft, repair, marking line drawing, etc.
    Mass (g)  23  Overall Length (mm)  180 
    from S$7.39
    Min. 8 days
  2. All-purpose drill
    Mokuba All-purpose drill
    It is very useful for piercing with a sharp tip. Ideal for gypsum board, corrugated board, slate drilling, galvanized iron, and metal marking work.
    Mass (g)  100  Overall Length (mm)  200 
    Rating:
    100%
    from S$21.99
    Min. 2 days
  3. Kujiri (Japanese Awl)
    Kakuri Kujiri (Japanese Awl)
    Made of rust resistant 18-8 stainless steel. For sewing, crafting, cooking, etc. * Because it is handmade, there may be some errors in the length.
    Material (Handle)  Itaya Kaede  Material (Needle)  Stainless steel (SUS304) 
    Rating:
    40%
    from S$7.69
    Min. 2 days
  4. Round drill
    SUNFLAG (SHINKI MFG) Round drill
    Mass (g)  130  Trusco Part No.  212-2880  Blade Length (mm)  100  Shank Diameter (Φmm)  30  Overall Length (mm)  203 
    Rating:
    100%
    from S$11.99
    Min. 2 days
  5. Stainless whale
    TRUSCO Stainless whale
    Made of rust resistant 18-8 stainless steel. Convenient for drilling holes. For sewing, crafts, etc.
    Rating:
    100%
    from S$9.99
    Min. 2 days
  6. Square punch
    ANEX Square punch
    For drilling holes in gypsum board and plastic board. For drilling pilot holes for wood screws and nails, and for drilling thin iron plates and cans. For marking work on metal plates. With a washer that can be used by hitting with a hammer. Uses high-grade plastic and acetate resin with excellent... Read More
    Shaft Length (mm)  110  Trusco Part No.  493-6701  Overall Length (mm)  199  Handle Diameter (Φmm)  30  Specification  With washer that can be hammered  Mass (g)  151 
    from S$15.99
    Min. 2 days
  7. Aluminum awl
    YAYOI CHEMICAL INDUSTRY Aluminum awl
    Since aluminum is used for the handle part, it has a moderate weight and is excellent in strength and durability.
    from S$12.99
    Min. 2 days
  8. All-purpose scratch
    TOOL MATE JAPAN All-purpose scratch
    Convenient for drilling pilot holes in timber and ice picking
    Shaft Length (mm)  100  Overall Length (mm)  175  Dimension (mm)  232×70×30  Handle Diameter (Φmm)  42  Shank Diameter (Φmm)  Mass (g)  88  Material  Chrome vanadium steel  Specification  Made of high impact resin  Material (Grip)  Rigid acrylic resin 
    Rating:
    60%
    from S$7.59
    Min. 2 days
  9. Hand Reamer
    JTC Hand Reamer
    For cleaning nozzles of welding machines and nozzles of carburetors!
    Size (mm)  0.45~1.55  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    80%
    from S$26.99
    Min. 2 days
  10. Round drill
    Wera Round drill
    For pilot drilling work, marking work, etc.
    Mass (g)  82.4  Overall Length (mm)  197  Bit Size  Round drill  Shaft Length (mm)  105  Trusco Part No.  411-7212 
    from S$12.99
    Min. 2 days
  11. Perforated
    KYOKUTO (Kyokuto-Sanki) Perforated
    Rust resistant, durable and suitable for marking and scribing work. It is convenient because it can be used in many fields during construction.
    Material (Tip)  High stainless 
    Rating:
    100%
    from S$12.99
    Min. 2 days
  12. Wooden handle
    TKG Wooden handle
    Material  Stainless wood 
    Rating:
    20%
    from S$6.99
    Min. 2 days
  13. Kiri
    PB SWISS TOOLS Kiri
    The handle is made of PB original plastic with excellent impact resistance. For light work.
    Overall Length (mm)  120  Mass (g)  34  Shaft Length (mm)  60 
    from S$19.99
    Min. 2 days
  14. Powerful type
    PB SWISS TOOLS Powerful type
    The best drill for heavy work. The handle is made of PB original plastic with excellent impact resistance.
    Shank Diameter (Φmm) 
    Rating:
    80%
    from S$27.99
    Min. 4 days
  15. Scratch owl
    ANEX Scratch owl
    For drilling pilot holes for wood screws and marking before drilling. With a washer that can be used by hitting with a hammer. Uses high-grade plastic and acetate resin with excellent oil resistance, chemical resistance, impact resistance, and insulation.
    Trusco Part No.  493-7244  Mass (g)  122  Shaft Length (mm)  80  Handle Diameter (Φmm)  30  Overall Length (mm)  169 
    from S$13.99
    Min. 2 days
  16. Four-sided cone
    GISUKE (Takagi) Four-sided cone
    Comes with a hexagonal safety cap that does not easily roll when placed. For making small holes in wood and PVC.
    from S$4.99
    Min. 3 days
  17. Three-eyed cone
    TRUSCO Three-eyed cone
    The handle is made of cypress white wood, which makes it hard to slip and easy to hold. Suitable for deep drilling and pilot drilling of large nails. For drilling large nails
    Material  Blade: ordinary steel, handle: cypress 
    from S$8.39
    Min. 3 days
  18. Corner
    Wera Corner
    For pilot drilling work, marking work, etc.
    Shaft Length (mm)  107  Bit Size  Corner  Overall Length (mm)  199  Mass (g)  79.2  Trusco Part No.  411-7221 
    from S$12.99
    Min. 2 days
  19. Thousand sheets
    YAYOI CHEMICAL INDUSTRY Thousand sheets
    The wooden pattern fits in your hand. The PC handle is small, light and easy to work with.
    from S$3.99
    Min. 5 days
  20. Rat cone
    TRUSCO Rat cone
    It has a three-pronged tip and is suitable for drilling fragile hard materials such as acrylic and bamboo materials. The handle is made of cypress white wood that fits comfortably in your hand. For drilling holes in general wood, acrylic, and bamboo
    Trusco Part No.  764-6992  Mass (g)  30  Overall Length (mm)  240  Material  Blade: ordinary steel, handle: cypress 
    from S$8.39
    Min. 32 days
  21. Reamer
    PB SWISS TOOLS Reamer
    A reamer with a quadrangular pyramid tip. The handle is made of PB original plastic with excellent impact resistance.
    Rating:
    80%
    from S$32.99
    Min. 4 days
  22. 2 cones 3rd and 4 sides
    DAIKU BIYORI 2 cones 3rd and 4 sides
    [Third eye cone] For deep drilling. [Square pyramid] For making thin and small holes.
    Rating:
    100%
    from S$5.29
    Min. 2 days
  23. Rat cone
    GISUKE (Takagi) Rat cone
    For drilling deep holes and drilling large diameter holes.
    from S$4.99
    Min. 5 days
  24. Corner
    SUNFLAG (SHINKI MFG) Corner
    Trusco Part No.  212-2871  Blade Length (mm)  100  Overall Length (mm)  203  Mass (g)  150  Shank Diameter (Φmm)  30 
    from S$11.99
    Min. 3 days
  25. A thousand wood holes
    BIGMAN A thousand wood holes
    For drilling, handicraft, repair, marking line drawing, etc.
    Overall Length (mm)  170  Mass (g) 
    from S$7.29
    Min. 8 days
  26. Round drill
    BONDHUS Round drill
    Shaft Length (mm)  100  Length of Grip  110  Handle Diameter (Φmm)  34  Shank Diameter (Φmm)  Material (Blade)  Chrome vanadium steel / nickel plating  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$10.99
    Min. 7 days
  27. Powerful Kiri (Gimlet) with Cardboard
    PB SWISS TOOLS Powerful Kiri (Gimlet) with Cardboard
    The best drill for heavy work. The handle is made of PB original plastic with excellent impact resistance.
    Shank Diameter (Φmm) 
    from S$29.99
    Min. 4 days
  28. Kiri (Japanese Gimlet)
    PB SWISS TOOLS Kiri (Japanese Gimlet)
    The handle is made of PB original plastic with excellent impact resistance. For general work.
    Shaft Length (mm)  80  Mass (g)  57  Overall Length (mm)  155 
    from S$22.99
    Min. 4 days
  29. Kiri
    ESCO Kiri
    from S$14.99
    Min. 4 days
  30. Hand reamer
    PB SWISS TOOLS Hand reamer
    Ideal for expanding holes. The handle is a shock-resistant PB plastic handle. The grip is made of CAB (Cellulose, Aceto, Butyrate), which contains natural materials made from wood and cotton. The grip is gentle on the skin, ideal for gripping, has excellent impact resistance and is easy to clean.... Read More
    from S$169.90
    Min. 4 days
  31. Nailing
    BONDHUS Nailing
    Shaft Length (mm)  100  Length of Grip  110  Handle Diameter (Φmm)  34  Shank Diameter (Φmm)  Material (Blade)  Chrome vanadium steel / nickel plating  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$14.99
    Min. 7 days
  32. 3rd cone
    GISUKE (Takagi) 3rd cone
    For deep drilling.
    from S$4.69
    Min. 3 days
  33. Four-way drill
    EIGERTOOL Four-way drill
    The Eiger case cone is easy to choose because the seal is color-coded according to size. It is also safe because it has a protective case for the cutting edge.
    Material  Steel / wood 
    from S$4.69
    Min. 5 days
  34. Stainless Kujiri (Japanese Awl)
    BIGMAN Stainless Kujiri (Japanese Awl)
    Convenient for various drilling, leather work, marking work, and marking. For drilling holes in leather and vinyl.
    Mass (g)  100  Size 
    from S$11.99
    Min. 8 days
  35. Stainless lottery bag
    No Brand Stainless lottery bag
    Rust-resistant stainless steel needle. As an awl normally. For handicrafts.
    Size 
    from S$9.59
    Min. 3 days
  36. Corrugated sheet
    Wakai Sangyo Corrugated sheet
    With fit guide
    Hole Diameter (Φmm)  5.5 
    from S$87.99
    Min. 6 days
  37. 4x60mm drill
    ESCO 4x60mm drill
    Esco Part No.  EA567AB-0 
    from S$23.99
    Min. 4 days
  38. Square
    BIGMAN Square
    For drilling holes in gypsum board, corrugated sheet, and slate For drilling holes in thin iron plates and cans For drilling holes in cardboard and streaks For marking of galvanized iron and metal plates
    Mass (g)  163  Shank Diameter (Φmm)  Overall Length (mm)  203 
    from S$14.99
    Min. 8 days
  39. Round last
    BIGMAN Round last
    For drilling holes in gypsum board, corrugated sheet, and slate For drilling holes in thin iron plates and cans For drilling holes in cardboard and streaks For marking of galvanized iron and metal plates
    Mass (g)  136  Shank Diameter (Φmm)  6.3  Overall Length (mm)  203 
    from S$15.99
    Min. 8 days
  40. Corner
    BONDHUS Corner
    Shaft Length (mm)  100  Length of Grip  110  Handle Diameter (Φmm)  34  Shank Diameter (Φmm)  Material (Blade)  Chrome vanadium steel / nickel plating  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$12.99
    Min. 7 days
View : Grid List
Filter

Items 1 - 40 of 124

Set Ascending Direction