All Category

Precision Grinders

View : Grid List
Filter

Items 1 - 40 of 445

Set Ascending Direction
  1. Multi router set
    PROMOTE Multi router set
    With this set, any precision machining is OK. With flexible shaft convenient for precision machining
    Mass (g)  640 (including code)  Power Consumption (W)  130  Rotational Speed (min -1 [rpm])  8000-30000 (stepless speed change)  Rated Voltage (V)  100  Rated Current (A)  1.3  Type of Insulation  Double insulation structure 
    Rating:
    69%
    from S$139.90
    Min. 2 days
  2. Mini router set (with transformer)
    PROXXON Mini router set (with transformer)
    A 12V type mini router that reduces the burden on the motor. The design has also been redesigned and equipped with a rubber grip. A dedicated power transformer is also included. Glass engraving, general engraving, metal engraving, model work
    Mass (g)  250 (not including transformer)  Power Input (V)  DC12  Power Consumption (W)  20  Dimensions, Diameter x Length L (Φmm x mm)  33.5 × 210 (router body)  Chuck Diameter (Φmm)  2.35/3.0  Transformer  (Power supply) AC100V → DC12V 1.0A  Rated usage time (minutes)  15  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    90%
    from S$119.90
    Min. 2 days
  3. Mini router MM100 (main unit only)
    PROXXON Mini router MM100 (main unit only)
    Equipped with two bearings (made of aluminum) at the tip that has been processed with high precision. Equipped with a rubber ring for improved work sensation. The easy-to-operate speed control allows you to adjust the speed to your liking. Uses a DC100V motor. Glass engraving, general engraving, ... Read More
    Included Accessories  For collet chuck Φ2.35 / 3.0mm, spanner  Mass (g)  260  Power Input (V)  100(50/60Hz)  Power Consumption (W)  35  Chuck Diameter (Φmm)  2.35/3.0  Rated usage time (minutes)  15 
    Rating:
    96%
    from S$179.90
    Min. 2 days
  4. Mini router kit
    RELIEF Mini router kit
    With stepless speed adjustment function. Comes with 19 abundant accessory parts that can be used immediately. Because it is small and lightweight, you can work as if you were holding a pen.
    Mass (g)  165 (including code)  Power Input (V)  AC100 50/60Hz  Power Consumption (W)  10  Rotational Speed (min -1 [rpm])  3000~12000  Type of Insulation  Double insulation  Rated usage time (minutes)  15 
    Rating:
    58%
    from S$119.90
    Min. 2 days
  5. Mini router MM20
    PROXXON Mini router MM20
    Small high speed mini router It can be used for various purposes such as glass engraving.
    Mass (g)  150  Power Input (V)  100(50/60Hz)  Power Consumption (W)  15  Rotational Speed (min -1 [rpm])  16500  Chuck Diameter (Φmm)  2.35  Rated usage time (minutes)  15 
    Rating:
    75%
    from S$74.99
    Min. 2 days
  6. High torque mini router
    EARTH MAN High torque mini router
    High torque type (approximately twice that of R-5) improves work efficiency. Built-in micro bearings. With stepless speed control. With "Glass Sculpture Guide". Comes with a durable and light aluminum hard case. For hobby, general engraving, precision work, and glass engraving. Work eas... Read More
    Set Contents  With 5 tip tools  Power Input (V)  AC100V、50/60Hz  Rotational Speed (min -1 [rpm])  About 4000-18000  Output Voltage (V)  DC18  Input Voltage (V)  DC18  Output Current (mA)  750  Rated Time (minutes)  15 
    Rating:
    75%
    from S$129.90
    Min. 2 days
  7. Router mini
    HOZAN (HOZAN TOOL INDUSTRIAL) Router mini
    Drilling, deburring, etc. by exchanging bits for cutting the substrate pattern and peeling the resist film A high-speed model with a maximum rotation speed of 16500 rpm for cutting and rust removal. With lighter force, it is possible to sharpen more quickly. With speed control function. The rotat... Read More
    Mass (g)  160 (Excluding code bits)  Frequency (Hz)  50/60  Power Consumption (W)  20  Rotational Speed (min -1 [rpm])  7000~16500  Rated Voltage (V)  AC100  Handle Diameter (Φmm)  18 (minimum part)  Rated Time (minutes)  15  Standard Bit  K-109-10  Chuck Diameter (Φmm)  2.35 
    Rating:
    20%
    from S$199.90
    Min. 2 days
  8. Micro grinder
    URAWA Kogyo Micro grinder
    The lightweight type handpiece is easy to hold and enables high-precision processing. The number of revolutions can be switched in 4 stages, and it can withstand continuous use for a long time. u-hobby standard set For light cutting
    Specification  Handpiece size: Φ26 × 122mm  Mass (g)  Body / 850, Handpiece / 190  Rotational Speed (min -1 [rpm])  8000 ・ 15000 ・ 20000 ・ 25000 (4-speed)  As ONE Part Number  1-6308-01  Collet diameter (Φmm)  2.35 (3.0 included) 
    Rating:
    87%
    from S$559.90
    Min. 2 days
  9. Joy Maru
    Sumflex Joy Maru
    A lightweight slim router with a slim body and adjustable rotation speed. A versatile type with two types of chucks. A hobby router that can be used for polishing and shaving wood, stone, glass, shells, plastic, pottery, iron, etc.
    As ONE Part Number  62-4941-77 
    from S$199.90
    Min. 2 days
  10. Joy Robo Pro
    Sumflex Joy Robo Pro
    The volume switch with feedback function that does not reduce torque even at low rotations makes the continuously variable transmission hand-held part thin (22 mm diameter), and the flexible shaft enables flexible machining.
    Mass (g)  1400  Current (A)  Power Input (V)  AC100 50/60Hz  Rated Power Consumption (W)  90  Continuous Operating Time (minutes)  30 
    Rating:
    20%
    from S$389.90
    Min. 18 days
  11. Bit holder for hand carving
    RELIEF Bit holder for hand carving
    For detailed work unique to hand carving, just write and carve a pattern with an oil-based colored pencil for sketching. A set of 5 diamond bits dedicated to pattern engraving and character engraving, 1 whetstone with a shaft for metal, and 1 oil-based colored pencil (Damato) For glass Ritzen gla... Read More
    Tip Diameter (Φmm)  2.35 
    from S$29.99
    Min. 4 days
  12. Motor unit
    Leutor (NIHON SEIMITSU KIKAI KOSAKU) Motor unit
    Small and lightweight. Torque type in 2.64N ・ cm. The tip tool can be attached and detached with a single touch by simply turning the set ring. Collet chuck type continuously variable transmission * A power unit (LPC-120) is required for use.
    Rotational Speed (min -1 [rpm])  4000~35000  Input Voltage (V)  DC 5~30  No-load Current (A)  0.27  Maximum Load Current (A)  1.5  Maximum Input (W)  42 
    from S$599.90
    Min. 2 days
  13. Brushless grinder Forte300α
    Mr. Meister Brushless grinder Forte300α
    We have achieved a low price class among brushless motor type precision handpiece grinders. Unlike the brush type, it is economical because there is no need to replace the carbon brush. Maintenance time can also be significantly reduced. Adopting a practical universal design based on ergonomics, ... Read More
    Mass (g)  1900  Output (W)  150  Power Input (V)  100 50/60Hz  Function  Forward and reverse rotation possible  Rotation Speed (min-1[rpm])  0-40000 (stepless speed change)  Gripping Diameter (Φmm)  3.0  As ONE Part Number  2-9404-01  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$999.00
    Min. 6 days
  14. Accessory motor cord for micro grinder
    Eiko Accessory motor cord for micro grinder
    Mass (g)  95 
    from S$179.90
    Min. 4 days
  15. Attachment for micro grinder (rotary)
    Eiko Attachment for micro grinder (rotary)
    Included Accessories  spanner  Mass (g)  120  Rotational Speed (min -1 [rpm])  1000~40000  Suitable Collet  Φ1.0~Φ3.175mm  Compatible motor  DMT40、DMT20 
    from S$359.90
    Min. 4 days
  16. Eco Grande Brushless Handpiece Torque Type
    Argofile Japan Eco Grande Brushless Handpiece Torque Type
    from S$869.90
    Min. 7 days
  17. Speed adjustable pencil router B Kong
    YANASE Speed adjustable pencil router B Kong
    Pencil type & speed adjustment allows you to do precision work as you like! Pencil type grip allows you to work comfortably! Model processing, glass edging, silver accessory processing, metal processing, wood processing, etc.
    Mass (g)  175  Rotational Speed (min -1 [rpm])  3000~13000  Rated usage time (minutes)  15  Collet diameter (Φmm)  2.34、3  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    76%
    from S$79.99
    Min. 2 days
  18. MINIKONG NEXT
    YANASE MINIKONG NEXT
    Light, small, cordless with 4 bits to get started right away
    Mass (g)  85  Shaft Diameter  Φ2.35/3mm  Rotational Speed (min -1 [rpm])  5000/9000/14000  Operation Time (minutes)  Approx. 90 when fully charged  Recharging Time (hours)  About 2  Rated usage time (minutes)  15  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    81%
    from S$49.99
    Min. 2 days
  19. Mini Router Set
    PROXXON Mini Router Set
    A mini router with high performance and low price, a great value advanced parts set. By using a 12V motor, a low price has been achieved. The product power is also strong, and a small diameter drill chuck is used for the tip chuck part, and bits up to 3.2 mm can be attached. Cutting metal, wood a... Read More
    Material  ABS resin, iron, aluminum  Mass (g)  250 (not including transformer)  Power Input (V)  DC12  Power Consumption (W)  20  Rotational Speed (min -1 [rpm])  8000~20000  Transformer  (Power supply) AC100V → DC12V ・ 1.0A 
    Rating:
    95%
    from S$119.90
    Min. 2 days
  20. Mini router set MM100
    PROXXON Mini router set MM100
    Glass engraving, general engraving, metal engraving, etc.
    Mass (g)  260  Power Input (V)  100(50/60Hz)  Power Consumption (W)  35  Rotational Speed (min -1 [rpm])  8000~18000  Dimensions, Diameter x Length L (Φmm x mm)  35×230  Chuck Diameter (Φmm)  2.35/3.0  Rated usage time (minutes)  15  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    90%
    from S$229.90
    Min. 2 days
  21. Mini router (100V)
    PROXXON Mini router (100V)
    It uses a powerful DC magnet motor. Work can be performed precisely and speedily, such as cutting, polishing, rust removal, metal processing, and mold correction. Glass engraving, general engraving, metal engraving, model work
    Mass (g)  550  Power Input (V)  100(50/60Hz)  Power Consumption (W)  50  Rotational Speed (min -1 [rpm])  8000~20000  Chuck Diameter (Φmm)  2.35/3.0/3.2  Rated usage time (minutes)  15  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    87%
    from S$199.90
    Min. 2 days
  22. Battery powered router
    MonotaRO Battery powered router
    It is a battery-powered and easy-to-use router. A whetstone is attached. For general engraving, precision polishing, glass work, etc. * Do not use for any other purpose.
    Mass (g)  Approx. 106 (excluding battery)  Voltage (V)  Power Consumption (W)  3.5  Rotational Speed (min -1 [rpm])  15000  Suitable Battery  AA alkaline batteries × 2  Rated usage time (minutes)  50 
    Rating:
    68%
    from S$27.99
    Min. 2 days
  23. Vibrating Pen
    SK (Niigata Seiki) Vibrating Pen
    An electric marking pen that can easily mark anything such as iron, aluminum, brass, copper, plastic, glass, stone, wood, and leather. With a dial that can adjust the thickness of the marking. With a strong and weak dial that can be adjusted according to the hardness of the material. With a templ... Read More
    Included Accessories  1 template  Material (Main Unit)  Nylon resin  Mass (g)  295  Power Consumption (W)  Tip Angle (°)  60  Rated Voltage (V)  AC100 (50/60Hz)  Material (Tool Bit)  Cemented carbide 
    Rating:
    83%
    from S$129.90
    Min. 2 days
  24. Handy multi-router
    PROXXON Handy multi-router
    A high-speed mini grinder that can be used for various purposes such as engraving, polishing, cutting, drilling, cutting, and polishing. Cutting, various polishing, rust removal, drilling, cutting, polishing
    Mass (g)  500  Power Input (V)  100(50/60Hz)  Power Consumption (W)  50  Rotational Speed (min -1 [rpm])  8000~18000  Dimensions, Diameter x Length L (Φmm x mm)  220  Chuck Diameter (Φmm)  0.5 to 3.2 (with drill chuck)  Rated usage time (minutes)  15 
    Rating:
    100%
    from S$179.90
    Min. 2 days
  25. High Speed Rotary Tool
    DREMEL High Speed Rotary Tool
    Equipped with an easy twist system, accessories can be replaced quickly and easily without a wrench! Cooling efficiency is improved by 20% compared to the conventional one by improving the cooling system! Durability is improved! Soft rubber grip. Even when you hold it like a pen and use it, it fi... Read More
    Mass (g)  455  Rotational Speed (min -1 [rpm])  10000~28000  Collet diameter (Φmm)  3.0 to 3.2 axes (standard accessory) 
    Rating:
    73%
    from S$149.90
    Min. 2 days
  26. Pen Sander
    PROXXON Pen Sander
    Mass (g)  200  Power Input (V)  100(50/60Hz)  Power Consumption (W)  15  Vibration Frequency (min-1 6800 (tip)  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    95%
    from S$89.99
    Min. 2 days
  27. Precision hand grinder L-JK
    Leutor (NIHON SEIMITSU KIKAI KOSAKU) Precision hand grinder L-JK
    Standard hand grinder model. Drill chuck type (chuck capacity Φ0.5 to 6.0), rotation speed 22000min -1 . It is suitable for grinding wheels with shafts. * A type that is used by directly connecting an outlet to a 100V power supply, and the rotation speed is fixed.
    Mass (g)  670  Frequency (Hz)  50/60  Power Input (V)  AC100 50/60Hz  Rotational Speed (min -1 [rpm])  22000  Maximum Torque (Nm)  0.059  Rated Current (A)  0.75  Rated Power Consumption (W)  68  Wheel Outer Diameter (Φmm)  Up to 25 
    Rating:
    100%
    from S$489.90
    Min. 2 days
  28. Pen Sander
    PROXXON Pen Sander
    For filing and finishing of soft materials such as plastic models and Mini 4WD plastic. Since it vibrates finely, it is ideal for polishing narrow spaces, corners, and small dents. In addition to the normal set of 180, 240, and 400, 800 file paper is included. Allows for even finer finishing work... Read More
    Mass (g)  About 238  Power Input (V)  100、50/60Hz  Power Consumption (W)  15  Vibration Frequency (min-1 6800  Rated usage time (minutes)  15 
    Rating:
    87%
    from S$99.90
    Min. 2 days
  29. Mini router MM30
    PROXXON Mini router MM30
    Small high-speed mini router Electronic control without permission It can be used for various purposes such as glass engraving.
    Mass (g)  160  Power Input (V)  100(50/60Hz)  Power Consumption (W)  15  Rotational Speed (min -1 [rpm])  7000~16500  Chuck Diameter (Φmm)  2.35  Rated usage time (minutes)  15 
    Rating:
    80%
    from S$119.90
    Min. 2 days
  30. Micro polisher
    PROXXON Micro polisher
    Surface polishing machine that can maintain torque even at low rotation Polishing, polishing
    Mass (g)  720  Power Input (V)  100  Power Consumption (W)  50  Rotational Speed (min -1 [rpm])  800~2400  Rated usage time (minutes)  15  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    90%
    from S$299.90
    Min. 2 days
  31. Mini router (main unit only)
    PROXXON Mini router (main unit only)
    A 12V type mini router that reduces the burden on the motor. The design has also been redesigned and equipped with a rubber grip. Glass engraving, general engraving, metal engraving, model work * Power transformer is not included. It cannot be used without a transformer. (Trans MT58: Sold separat... Read More
    Included Accessories  For collet chuck Φ2.35 / 3.0mm ・ Spanner  Mass (g)  250  Power Input (V)  DC12  Power Consumption (W)  20  Dimensions, Diameter x Length L (Φmm x mm)  33.5×210  Chuck Diameter (Φmm)  2.35/3.0  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    95%
    from S$88.99
    Min. 2 days
  32. Mini router set
    PROXXON Mini router set
    A small, lightweight electric grinder. This machine is a 12-volt model and can be used with a home power supply using a dedicated transformer (included). Adjustment is possible between 8,000 and 20,000 min-1 (times/min) with a speed control knob with a switch. It can withstand high torque work an... Read More
    Mass (g)  250 (not including transformer)  Power Input (V)  DC12  Power Consumption (W)  20  Thickness (Diameter in Φmm)  33.5  Transformer  (Power supply) AC100V → DC12V 1.0A  Rated usage time (minutes)  15 
    Rating:
    100%
    from S$99.90
    Min. 2 days
  33. 100pcs  Rotary tool set
    RELIEF 100pcs Rotary tool set
    For basic work such as shaving, cutting, carving, and polishing. We have carefully selected 100 tip tools that can be used here and there. Hard case for convenient storage For polishing, precision polishing, rust removal, glossing, drilling, cutting, and cutting of metals, non-ferrous metals, sto... Read More
    Shank Diameter (Φmm)  Φ2.35 
    Rating:
    60%
    from S$68.99
    Min. 2 days
  34. Hand leuter
    FUNTEC Hand leuter
    Equipped with a set ring that was only used in high-end models. Bits can be replaced simply by turning the set ring. Right-handed and left-handed users can also use the forward/reverse rotation switch. Axial accuracy equal to that of high-end models is achieved. De-energizes the handpiece in the ... Read More
    Mass (g)  (Handpiece) 160, (Controller) 850  Power Consumption (W)  (Controller) 10  Rotational Speed (min -1 [rpm])  0~15000  Rated Input Voltage (V)  (Controller) AC100 50 / 60Hz  Bit shank Diameter (Φmm)  2.34 
    Rating:
    30%
    from S$229.90
    Min. 2 days
  35. Electric Engraver
    DREMEL Electric Engraver
    Lightweight and compact for precise engraving The soft rubber grip makes it easy to hold as you wish. Reduces fatigue from work. Comes with an adjustment function that allows you to choose from 9 levels of shaving depth.
    Mass (g)  300  Power Input (V)  100(50/60Hz)  Power Consumption (W)  Number of Stroke (spm)  6000/7200 
    Rating:
    60%
    from S$76.99
    Min. 2 days
  36. Vibrator pen
    TRUSCO Vibrator pen
    It can be engraved on various materials such as iron, aluminum, brass, copper, plastic, glass, stone, and wood. The body uses ABS resin. Engrave characters by vibration. AC100V 50 / 60Hz only * Stone materials support hardness up to HV510.
    Included Accessories  1 template  Mass (g)  295  Power Input (V)  AC100(50/60Hz)  Power Consumption (W) 
    Rating:
    67%
    from S$119.90
    Min. 2 days
  37. Hobby router set
    RELIEF Hobby router set
    With 85 pieces of tip that can be used for various purposes. Comes in a hard case that is convenient for storage and carrying. With a stepless adjustment function, it can be used according to the application. Includes "Tora no Maki" with instructions on how to make original glasses, pat... Read More
    Material  ABS+TPR  Mass (g)  112  Rotational Speed (min -1 [rpm])  6000~13000  Rated Power Consumption (W)  5.6  Suitable Shaft Diameter (Φmm)  2.35  Rated Operation Time  10 minutes  Quantity  Tip parts: 85 
    from S$97.99
    Min. 2 days
  38. Power router
    EARTH MAN Power router
    With speed control. Φ2.35mm / Φ3.00mm axis bits can be used. For engraving, precision polishing, glass work, etc. For fine grinding and polishing.
    Mass (g)  600  Frequency (Hz)  50/60  Current (A)  0.92  Voltage (V)  AC100  Rotational Speed (min -1 [rpm])  ~28000  Rated Power Consumption (W)  90  Rated Time (minutes)  About 30 
    Rating:
    100%
    from S$99.90
    Min. 2 days
  39. MINITUR JET 2
    URAWA Kogyo MINITUR JET 2
    Small size, light weight, high performance and reasonable price. It is a simple design that prioritizes ease of use. It can be used continuously from low speed rotation to high speed rotation. The price remains unchanged with improved performance and functions compared to conventional products. D... Read More
    Mass (g)  1960  Rotational Speed (min -1 [rpm])  3500~35000 
    Rating:
    100%
    from S$749.90
    Min. 2 days
  40. Small pen type tool PT-αⅡ
    Mr. Meister Small pen type tool PT-αⅡ
    This is the latest model of PT-α, a light use model designed for various hobby uses. A slender and easy-to-grip pen type that is ideal for light work, slender and easy to use, and a built-in stepless speed change circuit. As in the past, it is compatible with three-claw chucks, and can be replace... Read More
    Power Input (V)  100 50/60Hz  Rotation Speed (min-1[rpm])  4000-18000 (stepless speed change)  Input (W)  16  As ONE Part Number  2-9401-01  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    87%
    from S$179.90
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 445

Set Ascending Direction