Sharpen with the power of sonic vibration. A new type of sharpener was born from Kyocera. Sharp! Quick! Easy! Uses a fine ceramic whetstone. As it is a compact handy type, it can be used for various purposes. Sharp sharpness is revived with a small number of sharpenings.
Electric sharpener (for m... Read More
It is an electric and water polishing type blade polishing machine. With forward / reverse rotation switch, water splash prevention cushion cover, and simple blade guide.
For sharpening knives such as fleas, planes, chisel, various factories, and small knives in the workplace.
Frequency (Hz) 50/60 Power Input (V) 100 Power Consumption (W) 125 Current Consumption (A) 1.3 Wheel Outer Diameter (Φmm) 180 Wheel Hole Diameter (Φmm) 70 Rotation Speed [50/60Hz] (min -1 [rpm]) 400/470
Rated Frequency (Hz) (Motor) 50/60 Rated Power Consumption (W) 220 Rated Time (minutes) (Motor) 15 Motor Voltage (V) AC100 (for general household) Motor Rotation Speed (min -1 [rpm]) 4800
A dry type knife sharpener that does not use water to sharpen everything from household items such as kitchen knives and scissors to drill bits and tip saws. Since it uses a diamond wheel, it will not clog.
For tip saws, drills, engraving knives, kitchen knives, etc.
Specification Double insulation Frequency (Hz) Single phase AC 50/60 Rotational Speed (min -1 [rpm]) 1450/1720
You can easily, accurately, and sharpen to the optimum angle simply by polishing according to the wide guide. (Simultaneous sharpening of upper blade (higaki), cutting blade, and horizontal blade angles) Sharpening is completed in a short time! (Manufacturer measurement value / bar length 300 mm,... Read More
Mass of Main Unit (g) 650 Rated Frequency (Hz) (Motor) 50/60 Rated Power Consumption (W) 60 Rated Time (minutes) (Motor) 15 Motor Voltage (V) AC100 (for general household) Motor Rotation Speed (min -1 [rpm]) 22000
The cutting edge and depth gauge can be sharpened at the same time. Until now, the cutting edge and depth gauge had to be sharpened separately, but since the dedicated CBN wheel has a grindstone electrodeposited on the bottom as well as the 4.0Φ and 4.8Φ parts on the outer circumference, sharpeni... Read More
Mass (g) 610 Power Input (V) 100 Power Consumption (W) 100 Wheel Diameter (Φmm) 40 Rated Time (minutes) 30
Sharpening is completed in a short time with the new high-speed grinding machine (30000 rpm). It can be polished while attached to the chamber. The angle guide allows easy and accurate polishing.
Re-polishing a chainsaw. Saw chain re-polishing
Mass (g) 610 Rated Frequency (Hz) (Motor) 50/60 Rated Power Consumption (W) (Motor) 100 Rated Time (minutes) (Motor) 15 Motor Voltage (V) AC100 (for general household) Motor Rotation Speed (min -1 [rpm]) 30000
You can easily, accurately, and sharpen to the optimum angle simply by polishing according to the wide guide. (Simultaneous sharpening of upper blade (higaki), cutting blade, and horizontal blade angles) Sharpening is completed in a short time! (Manufacturer measurement value / bar length 300 mm,... Read More
Mass of Main Unit (g) 650 Rated Frequency (Hz) (Motor) 50/60 Rated Power Consumption (W) 60 Rated Time (minutes) (Motor) 15 Motor Voltage (V) AC100 (for general household) Motor Rotation Speed (min -1 [rpm]) 22000
A slim-shaped chainsaw grinding machine that can be used anywhere with AA batteries. Since it is battery-powered (either dry batteries or rechargeable batteries can be used), it can be used indoors, outdoors, or in the field. Anyone can sharpen! Sharpen anywhere! A high-precision, easy-to-use gui... Read More
Mass (g) 225 (excluding electricity) Continuous Operating Time (minutes) About 30 dressing angle (°) 30
Compact and lightweight, convenient to carry. The rotation speed can be adjusted according to the blade. The structure is such that the grinding water is stored in a container inside the main body.
Frequency (Hz) 50/60 Voltage (V) AC100 Rotation Speed at No Load (min-1[rpm]) Transmission 300-600 Maximum Power Consumption (W) 80 Type of Insulation Double insulation Wheel Outer Diameter (Φmm) 135 Rated Time (minutes) 30
A compact and lightweight wet type grinder that is convenient to carry. For sharpening all kinds of cutlery from household items such as kitchen knives, scissors and sickles.
You can also polish kitchen knives and sharpen R-shaped blades such as sickles.
Abrasive Grain Size WA1000 Frequency (Hz) 50/60 Current (A) 1.7/1.6 Rated Voltage (V) 100 Rated Power Consumption (W) 170/160 Operation Time (minutes) 30
It is a sharpener for the blade of the Kawayi replacement blade type plane. Since it is originally a replaceable blade type, the spare blade is disposable, but it can be sharpened a little. Since it has an angle, you can easily sharpen it just by setting a spare blade.
* When using a long blade, ... Read More
You can easily sharpen mowing tipped saws, scissors, and kitchen knives. Easy to match the tip saw !! With low rotation polishing, there is little burnback of the blade and it cuts for a long time. Approximately 50 pieces are polished with one diamond grindstone (using the back and front sides). ... Read More
Included Accessories Replacement diamond whetstone, loupe Mass (g) 3800 Power Consumption (W) 90 Rated Frequency (Hz) (Motor) 50/60 Rated Time (minutes) (Motor) 15 Motor Voltage (V) AC100 Motor Rotation Speed (min -1 [rpm]) 4800
Cigar power supply compatible type that is convenient in the field. No need for batteries! Whether it's a car or a battery, you can use it in two ways depending on the situation. Replace the battery cap and cigar power adapter for use. Super lightweight! Approximately 270g with a cigar power ... Read More
Specification Cigar with power adapter / Cordless Type Guide fixed type Mass (g) 225 (without batteries) Continuous Operating Time (minutes) Approx. 30 (when using batteries) dressing angle (°) 30
Simply lightly touch the surface of the grindstone with various blades to restore sharpness easily, quickly and beautifully. Since the diamond particles are electrodeposited, it is an epoch-making knife sharpener that can sharpen not only steel and stainless steel but also titanium knives that ar... Read More
The basic structure of the conventional model has been retained, but operability and safety have been further improved. Powerful Motor G Achieves a significant reduction in working time. High-density sharpening can be done quickly. In addition, you can easily perform the setup work required to re... Read More
Rated Frequency (Hz) (Motor) 50/60 Rated Power Consumption (W) 210 Rated Time (minutes) (Motor) 30 Motor Voltage (V) AC100 (for general household) Motor Rotation Speed (min -1 [rpm]) 4300
It comes with a grinder and is ready to use. With a polishing angle adjustment function that allows the chips to be separated. With polishing adjustment screw that can finely adjust the depth of cut. Adjustable blade feed (1 feed or 1 jump). Tipped saws with an outer diameter of 230 to 255 mm and... Read More
Abrasive Grain Size (Diamond Disc) 200 Frequency (Hz) (Body) 50/60 Current (A) (Body) 2.2 Voltage (V) (Body) AC100 Rotational Speed (min -1 [rpm]) (Body) about 6800 Rated Power Consumption (W) (Body) 200 Rated Time (minutes) (Body) 30
Easy to match the tip saw !! There is little burnback of the blade with low rotation polishing, and it cuts for a long time. Simply set the polishing machine body and tip saw and lightly press them by operating the left and right handles. Easy operation from setting to polishing.
Can be used for ... Read More
Rated Voltage (V) AC100 (for general household) Offset Angle (°) Sharpening blade: 90 (fixed) Rated Frequency (Hz) 50/60 Rated Power Consumption (W) 220 Rated Time (minutes) 15 Motor Rotation Speed (min -1 [rpm]) 4800 Tip saw outer diameter (Φmm) 230/255 Tip saw inner diameter (Φmm) 25.4
It is a three-piece set of mini high scare type 2 and storage box and diamond care. Recommended for those who want to be very particular about sharpening!
Wood carving in general
* For safety, please use masks and goggles when using.
Mini high scare type 2 and storage box are now a great deal. A must-have item for caring for your chisel!
Wood carving in general
* For safety, please use masks and goggles when using.
Just by placing various blades on the whetstone surface, sharpness can be restored easily, quickly, and beautifully. Since diamond particles are electrodeposited, you can sharpen even steel, stainless steel, and ceramic knives.
For sharpening blades such as kitchen knives, scissors, small knives,... Read More
Abrasive Grain Size #400 Rotational Speed (min -1 [rpm]) 2300-2900(50Hz)、2800-3500(60Hz) Rated Voltage (V) AC100 Mass of Main Unit (g) 2000 Rated Frequency (Hz) 50/60 Rated Power Consumption (W) 【50/60Hz】Hi 62、LOW 33/Hi 60、LOW 30 Wheel Hole Diameter (Φmm) 20 Rated Time (minutes) 10
Compact and portable desktop type grinder. It is recommended to use with the saving series that allows you to exchange discs with one-touch detachment. M10 one-touch discs and 15-hole discs can also be used. The angle of the disc surface can be changed by raising the stand.
For deburring, chamfer... Read More
Wheel Diameter (Φmm) 100 Power Consumption, at 50/60Hz (W) 150 No-load Rotation Speed [50/60Hz] (min -1 [rpm]) 3275/3930
Without removing the tipped saw, simply place it on the SK-1000 and rotate it for easy polishing. The time required for polishing is reduced to several tens of seconds.
A grinder for lawn mowers.
Range of Application 9, 10 inches Suitable Whetstone SK-1000-4 (file assembly)
You can grind easily, quickly, and safely with sharpness that even professionals can convince. Blades that have become dull and have been thrown away can be recycled and used for a more uniform finish. Reduce vibration. Both work efficiency and fuel consumption are improved, and the burden is red... Read More
Type without grinder Range of Application 9, 10, 12 inches
The cutting edge and depth can be sharpened at the same time. Equipped with a special whetstone, the cutting edge and depth gauge can be sharpened at the same time. Equipped with a forward and reverse rotation motor, the horizontal blade can be sharpened from the inside to the outside. Equipped w... Read More
Material Resin Power Input (V) 100 Power Consumption (W) 100 Rated Time (minutes) 30 File Outer Diameter W (Φmm) 4
This one is the medium sharpening and finishing of the chisel. It is for intermediate to advanced users who also comes with a diamond disk for rough sharpening. [Diamond disk] Please use the diamond surface as it is. Place the back of the blade on the surface so that it does not go against the di... Read More
Included Accessories Blue stick 1 piece Power Input (V) 100 Power Consumption (W) 60 Rotation speed (times / min) 3400(60Hz)、2800(50Hz)
It is a felt buff compressed with high density. The glue of the blue stick is dark → The finish is fine ・ The shape of the buff itself is hard to lose → The life is long ・ The shape of the buff is hard to change → The cutting edge is hard to become a round blade
Wood carving in general
You can grind easily, quickly, and safely with sharpness that even professionals can convince. Blades that have become dull and have been thrown away can be recycled and used for a more uniform finish. Reduce vibration. Both work efficiency and fuel consumption are improved, and the burden is red... Read More
Type Grinder: GS-580 (Mitsutomo) Range of Application 9, 10, 12 inches Suitable Whetstone SK-203T(WA36M)
You can grind easily, quickly, and safely with sharpness that even professionals can convince. It is possible to recycle and continue to use blades that have become dull and disposable, improving work efficiency and fuel consumption, and reducing the burden. You can also make a staggered blade.
A... Read More
Type without grinder Range of Application 9, 10, 12 inches
Easy to install, long life CBN wheel. It is a specification that can be used for about 10 years even if you change 5 to 6 saw chains in a year.
Exclusive replacement whetstone for chainsaw sharpeners.