All Category

Polishing Equipment

View : Grid List
Filter

33 Item(s)

Set Ascending Direction
  1. Magnetic barrel polishing machine PIPICRA CRAFT
    SUZUHO Magnetic barrel polishing machine PIPICRA CRAFT
    You can easily polish intricate details of all metals such as gold, silver and platinum. A small but high-power magnetic barrel polishing machine for small-scale workshops. Polishing work
    Polishing size (mm)  Up to 100  Mass (kg)  3.0  Power Input (V)  Single phase 100  polishing capacity (g)  Maximum polishing amount about 80  Rotational Speed (min -1 [rpm])  1200・1450  Main Unit Dimensions, Width W x Depth D x Height H (mm)  140×165×160  Maximum Output (W)  35 
    from S$689.90
    Min. 8 days
  2. Polishing stone for barrels Triangle for medium cutting
    Kimura Soap Polishing stone for barrels Triangle for medium cutting
    It is a high-quality, low-priced firing media with excellent cost performance.
    Dimension (mm)  6×6  Type  For medium cutting  Shape  triangle 
    Rating:
    90%
    from S$239.90
    Min. 8 days
  3. Polishing stone for barrel Angle cut for medium cutting
    Kimura Soap Polishing stone for barrel Angle cut for medium cutting
    It is a high-quality, low-priced firing media with excellent cost performance.
    Shape  Angle cut  Type  For medium cutting 
    from S$259.90
    Min. 9 days
  4. Plastic grinding stone for barrel cutting
    Kimura Soap Plastic grinding stone for barrel cutting
    A medium made by heating and curing a fine abrasive and resin. A soft media that is ideal for deburring and smoothing soft metals (zinc, aluminum, copper, brass, etc.). It is light and is not easily deformed, dented, or hardened.
    Type  For cutting  Shape  cone 
    from S$229.90
    Min. 9 days
  5. Change barrel polishing machine Small tumbler
    BISO Change barrel polishing machine Small tumbler
    The change barrel polishing machine rotates the tyco and hits the media against the polished product to polish it. 9-step speed adjustment, timer can be set in a wide range of time from 5 minutes to 240 minutes at 5 minute intervals, and the rotation direction is set to forward rotation, reverse ... Read More
    Inner Dimensions (mm)  (Tyco) slot Φ83 × width 130 × depth 82  Container Capacity (L)  0.7  Dimensions, Width W x Height H x Depth D (mm)  200×270×240  Fuse Capacity (A)  Power Input (V)  AC100・50/60Hz  polishing capacity (pieces)  General ring about 60 
    from S$1,699.00
    Min. 16 days
  6. Change barrel polishing machine Middle tumbler
    BISO Change barrel polishing machine Middle tumbler
    The change barrel polishing machine rotates the tyco and hits the media against the polished product to polish it. 9-step speed adjustment, timer can be set in a wide range of time from 5 minutes to 240 minutes at 5 minute intervals, and the rotation direction is set to forward rotation, reverse ... Read More
    Inner Dimensions (mm)  (Tyco) Φ100 x width 140 x depth 111  Container Capacity (L)  1.3  Dimensions, Width W x Height H x Depth D (mm)  215×280×265  Fuse Capacity (A)  Power Input (V)  AC100・50/60Hz  polishing capacity (pieces)  General ring about 100 
    from S$2,399.00
    Min. 63 days
  7. Mini eight standard handpiece
    Leutor (NIHON SEIMITSU KIKAI KOSAKU) Mini eight standard handpiece
    Mini eight system standard handpiece. Φ3mm collet chuck installed.
    Mass (g)  100  Outer Diameter (mm)  26  Overall Length (mm)  83.5  Specification  For φ2.34mm ・ Φ3mm axis tools  Suitable Model  M08A、M15A、M20A、M30A、M35A、M55A 
    from S$449.90
    Min. 4 days
  8. Plastic grinding stone for barrel For heavy cutting
    Kimura Soap Plastic grinding stone for barrel For heavy cutting
    A medium made by heating and curing a fine abrasive and resin. A soft media that is ideal for deburring and smoothing soft metals (zinc, aluminum, copper, brass, etc.). It is light and is not easily deformed, dented, or hardened.
    Type  For heavy cutting  Shape  cone 
    from S$299.90
    Min. 9 days
  9. Magnetic barrel polishing machine Rotary barrel middle
    BISO Magnetic barrel polishing machine Rotary barrel middle
    A medium-sized magnetic barrel polishing machine with a high-speed function. You can easily polish small parts to bangles, and it is easy to operate. Polishing work
    polishing capacity (g)  300 (30-50 rings)  Motor Rotation Speed (min -1 [rpm])  0~1600  Power Input (V)  AC110(50/60Hz)  Mass of Main Unit (kg)  1.2  Power Consumption (W)  90  Motor Output (W)  DC180(5A)  Container Capacity (L)  container dimensions (Φ x mm)  130×100  Main Unit Dimensions, Width W x Depth D x Height H (mm)  195 x 230 x 365 (including container)  Timer Setting  0-180 minutes 
    from S$1,699.00
    Min. 8 days
  10. Mini eight long handpiece
    Leutor (NIHON SEIMITSU KIKAI KOSAKU) Mini eight long handpiece
    Mini eight system long handpiece. Ideal for processing deep and narrow parts.
    Overall Length (mm)  118.5  Mass (g)  120  Outer Diameter (mm)  26  Specification  For Φ3mm axis tool  Suitable Model  M08A、M15A、M20A、M30A、M35A、M55A 
    from S$749.90
    Min. 4 days
  11. Magnetic barrel polishing machine
    SUZUHO Magnetic barrel polishing machine
    Ideal for those who are concerned about the polishing noise produced during polishing work. Easily polish intricate details of any metal (especially castings) such as gold, platinum and silver. Made in Japan. Polishing / surface treatment
    from S$379.90
    Min. 8 days
  12. Mini eight angle handpiece
    Leutor (NIHON SEIMITSU KIKAI KOSAKU) Mini eight angle handpiece
    Mini Eight System Angle Handpiece. The compact and lightweight 90 ° / 120 ° angle head enables efficient machining of narrow areas and light work. Ideal for polishing flat and curved surfaces.
    from S$649.90
    Min. 4 days
  13. Magnetic barrel polishing machine PIPICA PRO
    SUZUHO Magnetic barrel polishing machine PIPICA PRO
    A magnetic barrel grinding machine equipped with a professional model digital timer that can withstand the hard work of the factory, an automatic reversing function, and a speed controller. Digital operation panel: timer, automatic reversal, speed control, alarm, memory, pause. Polishing work
    Main Unit Dimensions, Width W x Depth D x Height H (mm)  200×240×230  polishing capacity (g)  Maximum polishing amount about 140  Rotational Speed (min -1 [rpm])  1300・1550  Power Input (V)  Single phase 100  Maximum Output (W)  65  Mass (kg)  7.0  Polishing size (mm)  Up to 150 
    from S$1,699.00
    Min. 8 days
  14. Power unit for Almighty Luter AM3
    Leutor (NIHON SEIMITSU KIKAI KOSAKU) Power unit for Almighty Luter AM3
    Equipped with three connectors for ultrasonic waves, mini eights, and pegras, one power unit supports three roles. Equipped with a touch panel that is easy to operate. It can be operated overseas due to the multi-power supply specifications. * Multiple handpieces cannot be used at the same time.
    Power Supply  AC90~240V(50/60Hz)  Power Consumption (W)  60  LCD Specifications  4.3 "TFT touch panel  Frequency (kHz)  Outgoing call: 18-26  Outer Dimensions, Width W x Depth D x Height H (mm)  200.5×277×170  Mass (kg)  4.5  Output (W)  45 
    from S$4,999.00
    Min. 6 days
  15. Foot pedal for sinus
    NAKANISHI (NSK) Foot pedal for sinus
    RoHS directive (corresponding to 10 substances)  Correspondence  Tool for Mounting  M6 × P0.9 Screw tightening type  Remark  ON-OFF only 
    from S$139.90
    Min. 7 days
  16. Sinas ZERO set
    NAKANISHI (NSK) Sinas ZERO set
    From aluminum dies to cemented carbide dies, grinding and polishing of various dies, and mirror finishing. (Plastic, press, die cast, forging, punching die, header die, etc.) Effective for removing the discharge hardening layer, polishing fine parts, and rib groove. For deburring, grinding and po... Read More
    Cable Length (m)  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$4,399.00
    Min. 7 days
  17. Plastic grinding stone for barrel For medium cutting
    Kimura Soap Plastic grinding stone for barrel For medium cutting
    A medium made by heating and curing a fine abrasive and resin. A soft media that is ideal for deburring and smoothing soft metals (zinc, aluminum, copper, brass, etc.). It is light and is not easily deformed, dented, or hardened.
    Type  For medium cutting  Shape  cone 
    from S$299.90
    Min. 9 days
  18. Ultrasonic handpiece
    URAWA Kogyo Ultrasonic handpiece
    It is ultra-compact and lightweight, has excellent operability, and can significantly reduce work time. Ideal for polishing finishes of various dies such as plastic, die casting, and pressing. It is effective for removing the hardened layer on the electric discharge machined surface, deburring th... Read More
    Trusco Part No.  515-3760  Suitable for  [Dedicated controller] UC550C  Amplitude  45μm  Mass (g)  175 
    from S$2,399.00
    Min. 3 days
  19. Sonic handpiece
    Leutor (NIHON SEIMITSU KIKAI KOSAKU) Sonic handpiece
    Polishing finish of various dies such as plastic die casting press, casting, and glass. Polishing of non-ferrous metals, ceramics, cemented carbide, precious metals and deburring of metals. Peeling and cutting of film (resist, etc.) such as printed circuit boards and copper foil.
    Suitable Model  AMC3  Connection Size  Tool: M6 x 0.75  Vibrator  PZT electrostrictive vibrator  Cord  Φ3.4×1.5m  Material  Engineering plastic  Mass (g)  185 
    from S$1,199.00
    Min. 4 days
  20. Sinas ZERO handpiece
    NAKANISHI (NSK) Sinas ZERO handpiece
    Slim and lightweight (140g), it is easy to hold and does not get tired even during long hours of work. The lightweight resin body gently and accurately conveys the slightest response to polishing work, allowing you to process it as you wish. We recommend using genuine Nakanishi tools such as elec... Read More
    Mass (g)  140 (excluding code)  Cable Length (m)  RoHS directive (corresponding to 10 substances)  Correspondence  Tool for Mounting  M6 × P0.9 Screw tightening type  Vibrator  PZT electrostrain type  Dimensions, Diameter x Length (Φmm × mm)  Up to 28 x 134 
    from S$2,399.00
    Min. 7 days
  21. Mini eight handpiece for exclusive use machine
    Leutor (NIHON SEIMITSU KIKAI KOSAKU) Mini eight handpiece for exclusive use machine
    Handpiece for mini-eight system / machine mounting.
    Mass (g)  235  Outer Diameter (mm)  28  Overall Length (mm)  80  Suitable Model  M08A、M15A、M30A 
    from S$679.90
    Min. 4 days
  22. Ultrasonic polishing equipment
    Leutor (NIHON SEIMITSU KIKAI KOSAKU) Ultrasonic polishing equipment
    Polishing finish of various dies such as plastic die casting press, coin making, and glass. Polishing of non-ferrous metals, ceramics, cemented carbide, precious metals and deburring of metals. Peeling and cutting of film (resist, etc.) such as printed circuit boards and copper foil.
    Component part  GS-H26+LSC-45  Power Input (V)  AC90~240 50/60Hz  Suitable Tool  M6×0.75  Output (W)  45  Power Consumption (W)  60  Cable Length (m)  1.5  Vibrator  PZT electrostrictive oscillator  Oscillation Frequency (kHz)  18~26 
    from S$3,999.00
    Min. 4 days
  23. Mini eight swing handpiece
    Leutor (NIHON SEIMITSU KIKAI KOSAKU) Mini eight swing handpiece
    Mini eight system swing handpiece. The tip vibrates from side to side, making it ideal for polishing narrow grooves and corners. The unique V-groove universal chuck makes it easy and reliable to install tip tools from Φ1.5 to Φ4.7.
    Overall Length (mm)  102  Mass (g)  140  Outer Diameter (mm)  26  Specification  Tip tool from Φ1.5 to Φ4.7 
    from S$989.90
    Min. 4 days
  24. Ultrasonic polishing device Almighty Lutter
    Leutor (NIHON SEIMITSU KIKAI KOSAKU) Ultrasonic polishing device Almighty Lutter
    Equipped with three connectors for ultrasonic waves, mini eights, and pegras, one power unit supports three roles. It can be used overseas due to the multi-power supply specifications. (Multiple handpieces cannot be used at the same time.) The operation is an easy-to-understand liquid crystal tou... Read More
    Output adjustment  Continuously variable without notice  Frequency (kHz)  (Outgoing) 18-26  LCD Specifications  4.3 inch TFT touch panel  Outer Dimensions, Width W x Depth D x Height H (mm)  200.5×277×170  Mass (kg)  4.5  Frequency  Adjustment: Automatic tracking type  Output (W)  45MAX 
    from S$5,999.00
    Min. 4 days
  25. Mini eight file handpiece
    Leutor (NIHON SEIMITSU KIKAI KOSAKU) Mini eight file handpiece
    Mini eight system file handpiece. The amplitude in the front-back direction is constant, making it ideal for precision grinding and polishing work such as filing and lapping. With the adjustment holder included as standard, flat and round shaft tools can be installed smoothly.
    Overall Length (mm)  112  Mass (g)  180  Outer Diameter (mm)  24 
    from S$1,499.00
    Min. 4 days
  26. Mini eight heavy handpiece
    Leutor (NIHON SEIMITSU KIKAI KOSAKU) Mini eight heavy handpiece
    Mini eight system heavy handpiece. A thick tip tool with a maximum shaft diameter of Φ6.35 mm can be used, making it ideal for hard machining.
    Mass (g)  150  Outer Diameter (mm)  26  Overall Length (mm)  91  Specification  For Φ6mm axis tool  Suitable Model  M08A、M15A、M30A 
    from S$689.90
    Min. 4 days
  27. Pegra motor unit
    Leutor (NIHON SEIMITSU KIKAI KOSAKU) Pegra motor unit
    By connecting to the power unit (AMC3), it can be widely used for deburring, polishing, etc. Φ3mm collet chuck installed. Ideal for polishing and deburring precious metals. Brushless motor specifications.
    Rotation Speed at No Load (min-1[rpm])  1000~50000  Mass (g)  260  Maximum torque (N.cm)  7.6  Suitable Model  AMC3  Cord  Φ6.2×1.5m 
    from S$899.90
    Min. 4 days
  28. Ultrasonic Sanding Device Power Unit For Ls-45
    Leutor (NIHON SEIMITSU KIKAI KOSAKU) Ultrasonic Sanding Device Power Unit For Ls-45
    Power unit for ultrasonic polishing device LS-45.
    Outer Dimensions, Width W x Depth D x Height H (mm)  166.5×245×153  Power Consumption (W)  60  Mass (kg)  1.99  Suitable Model  GS-H26  Frequency (kHz)  Outgoing call: 18-26  Power Supply  AC90~240V(50/60Hz)  Output (W)  45  Frequency  [Adjustment] Automatic tracking type 
    from S$2,699.00
    Min. 6 days
  29. Sinas ZERO controller
    NAKANISHI (NSK) Sinas ZERO controller
    It has a maximum output of 45W and is a powerful power that can be used for polishing. Digital display function, easy-to-see output level / amplitude display. LED is used to improve visibility and prevent erroneous operation. Equipped with heat generation protection function. The safety has been ... Read More
    Mass (kg)  1.5  Input power (V)  100~240  Outer Dimensions, Width W x Depth D x Height H (mm)  161×256×84  Oscillation Frequency (kHz)  19~29  Cable Length (m)  Power Consumption (W)  27  Maximum Output (W)  45 (UIN CLAMP mode) / 20 (CLAMP)  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$1,999.00
    Min. 7 days
  30. Polishing stone for barrel Finish polishing triangle
    Kimura Soap Polishing stone for barrel Finish polishing triangle
    It is a high-quality, low-priced firing media with excellent cost performance.
    Dimension (mm)  6×6  Type  For finishing polishing  Shape  triangle 
    Discontinued
  31. Polishing stone for barrels Angle cut for stock polishing
    Kimura Soap Polishing stone for barrels Angle cut for stock polishing
    It is a high-quality, low-priced firing media with excellent cost performance.
    Shape  Angle cut  Type  For finishing polishing 
    Discontinued
  32. Ultrasonic polishing equipment
    NAKANISHI (NSK) Ultrasonic polishing equipment
    Thorough pursuit of ease of use. Easy operation greatly improves efficiency. From aluminum dies to cemented carbide dies, grinding and polishing of various dies, and mirror finishing. (Plastic, press, die cast, forged, punched die, header die, etc.) It is effective for removing the discharge-cure... Read More
    Trusco Part No.  463-0769 
    Discontinued
View : Grid List
Filter

33 Item(s)

Set Ascending Direction