All Category

Cutting / Bending

View : Grid List
Filter

Items 1 - 40 of 646

Set Ascending Direction
  1. Polystyrene cutter
    HAKKO Polystyrene cutter
    With 100V power supply specifications, thick styrene can be cut continuously (thickness: 110mm, depth: 170mm). With a turbo switch, hard styrol can be easily cut. Energizing lamp display to notify of heat generation. By adopting an auto safety switch, heat is generated only while the switch is pr... Read More
    Trusco Part No.  367-8814  Mass (g)  410 (including code)  Power Consumption (W)  Power Supply  AC100V 50/60Hz  heater temperature (℃)  Normal: 170, Turbo: 250  Effective Cutting Capacity (mm)  Thickness / 110, Depth / 170 
    Rating:
    76%
    from S$44.99
    Min. 2 days
  2. Polystyrene Cutter
    HAKKO Polystyrene Cutter
    It's battery-powered, so you can carry it around and work anywhere. The slender grip that fits your hand is designed to be easy for women and children to use. Energizing lamp display to notify of heat generation. By adopting an auto safety switch, heat is generated only while the switch is pr... Read More
    Effective Cutting Capacity (mm)  Thickness / 70, Depth / 130  Set Contents  Body, 2 heaters (No.A1510)  Trusco Part No.  367-8393  Mass (g)  110 (excluding batteries) 
    Rating:
    76%
    from S$19.99
    Min. 2 days
  3. Desktop slide circular saw
    SHINKO (Shinko MechatroTech) Desktop slide circular saw
    Lightweight and compact design. Easy to set the angle. The table is 45 degrees left and right, and the tip saw is 45 degrees left. Clean work with a dust bag. Comes with a vertical vise and auxiliary stand. The maximum cutting capacity is 305 mm, and the tip saw is 190 mm. For cutting wood. Cutti... Read More
    Inclination angle (°)  (Saw blade) 0 left 45  Range  (Table rotation) 45 °  Dimensions (D x W x H) (mm)  (When attached) 810 x 675 x 410  Mass (kg)  10  Power Input (V)  100  Power Consumption (W)  1050  Current Consumption (A)  12  Outer Diameter of Saw Blade (Φmm)  190  Cable Length (m)  Inner Diameter of Saw Blade (Φmm)  20  Rated Time (minutes)  30  Frequency (Hz)  50/60  Rotational Speed (min -1 [rpm])  5000  Number of Teeth (p)  72  Type of Insulation  Double insulation  Suitable Material  For woodworking 
    Rating:
    77%
    from S$299.90
    Min. 2 days
  4. Saver saw
    BOSCH Saver saw
    Tool-free SDS system for plate replacement. Adjustable foot plate that can adjust the position where the blade hits. With dual LED lights that always illuminate the cut surface brightly and assist reliable work. Equipped with the strongest power 1100W motor in its class. Comes with a retractable ... Read More
    Power Input (V)  100(50/60Hz)  Dimensions (Width W x Height H) (mm)  460×160  Stroke width (mm)  28  Power consumption (input) (W)  1100  Cable Length (m)  Number of strokes (min-1 [times/min])  0~2700  Mass (kg)  3.5  Cutting Capacity, Pipe (mm)  150  Trusco Part No.  352-9703  Cutting Capacity, Mild Steel Sheet (mm)  20  Cutting Capacity, Wood (mm)  230  Carbon Brush Nominal Number  1619P04838 
    Rating:
    80%
    from S$379.90
    Min. 2 days
  5. Tabletop circular saw
    HOZAN (HOZAN TOOL INDUSTRIAL) Tabletop circular saw
    Diagonal cutting is possible by adjusting the angle of the blade. The rotation speed can be adjusted steplessly. A disc cutter for K-110 (K-110-1 / 2) can also be used. Various cutting processes can be performed by setting the guide. For cutting many materials such as metal, resin, wood, and subs... Read More
    Rated Time (minutes)  15  Power Cable (m)  Power Consumption (W)  200  Rotational Speed (min -1 [rpm])  3500~6000  Mass (kg)  5.8  Frequency (Hz)  50/60  Rated Voltage (V)  AC100 
    Rating:
    80%
    from S$749.90
    Min. 2 days
  6. TRYBUIL Electric saw Power cord type
    YAMAZEN TRYBUIL Electric saw Power cord type
    Since it is a power cord type, it is ideal for continuous work without worrying about running out of electricity like a rechargeable type. Work Supplies Factory Work Site Electric Tool Factory Work Site Hydraulic Tool Factory Work Site Reciprocating Saw Factory Work Site Jigsaw Factory Work Site ... Read More
    Cable Length (m)  1.5  Warranty Period  1 year from date of purchase  Stroke number (min -1 0 to 3700  Current (A)  2.9  Power Consumption (W)  280  Power Supply  AC100V(50/60Hz)  Mass (kg)  1.5  Dimensions, Width W x Depth D x Height H (mm)  370×60×125 
    Rating:
    90%
    from S$98.99
    Min. 2 days
  7. Trimmer
    RELIEF Trimmer
    For chamfering, grooving, circular cutting, etc. A clear base where you can see the cutting edge. The transparent base makes it ideal for detailed work. Template guide standard equipment. The cutting depth can be adjusted. Soft start with little recoil at start-up.
    Mass (kg)  1.5 (including code)  Rated Operation Time  15 minutes  Cord  2 core 1.8m  Dimension (mm)  215×90×90  Current (A)  3.6  Rated Power Consumption  350W  Power Supply  AC100V(50/60Hz)  Type of Insulation  Double insulation  Bit shank Diameter (Φmm)  Φ6 
    from S$119.90
    Min. 2 days
  8. Slide circular saw
    trad Slide circular saw
    Maximum cutting 330mm! (When cutting at right angles to the turntable) Turntable rotation range: 45 ° left and right Saw blade tilt angle: Maximum left 45 ° Convenient to carry Compact design Ideal for cutting general wood and plywood, and cutting at various angles
    Maximum Speed (m/min)  (Whetstone) 8000  Rated Power Consumption (W)  1200  Rated Current (A)  13  Mass of Main Unit (kg)  13  Outer Diameter of Saw Blade (Φmm)  190  Blade Thickness (mm)  Cable Length (m)  Inner Diameter of Saw Blade (Φmm)  20  Rated Frequency (Hz)  50/60  Rotation Speed at No Load (min-1[rpm])  5000  Rated Voltage (V)  AC100  Number of Teeth (p)  Circular saw blade / 72  RoHS directive (corresponding to 10 substances)  Correspondence  Type  For DIY 
    Rating:
    80%
    from S$389.90
    Min. 4 days
  9. Ultrasonic Cutter USW-335Ti / Ultrasonic Engraving Sword USW-334ek
    Honda Electronics Ultrasonic Cutter USW-335Ti / Ultrasonic Engraving Sword USW-334ek
    Carbide blade for USW-334, USW-335Ti
    As ONE Part Number  61-0174-22  Material  Tungsten carbide  Type  USW-334 / USW-335Ti carbide blade 1 pc. 
    Rating:
    80%
    from S$49.99
    Min. 2 days
  10. MAITZ powerful cutting machine
    Maitsu Corporation MAITZ powerful cutting machine
    Height H (mm)  168  Included Accessories  2 AA batteries  Mass (kg)  20  Width W (mm)  450  Depth D (mm)  460  Trusco Part No.  853-4089 
    from S$999.00
    Min. 5 days
  11. Electric hydraulic bender
    OGURA Electric hydraulic bender
    Supports bending of high-strength reinforcing bars (up to SD490). A separate structure that completely blocks "iron powder" and is trouble-free. A newly designed vendor with excellent durability. The more convenient angle fine adjustment lever determines the angle steplessly from 0 degr... Read More
    Bending speed (180 ° bending) (seconds)  Voltage (V)  Single phase 100 (50 / 60Hz)  Specification  Dial type  Mass (kg)  54.5  Power Consumption (W)  1050  Type  SD490 compatible model  Main Unit Dimensions, Length L x Width W x Height H (mm)  455×372×393  bending angle range  0~180° 
    from S$4,499.00
    Min. 6 days
  12. Ercolina Medibender MB42P
    Daido Kogyo Ercolina Medibender MB42P
    The compact design allows bending of large diameter pipes. It's easy to replace the jig.
    Output (W)  1100  bending angle (pipe) (°)  180  Power Cable (m)  Rotation Speed (min-1[rpm])  bending angle (rebar)  30  Dimensions, Width W x Depth D x Height H (mm)  410×570×450  Trusco Part No.  461-5387  Mass (kg)  59  Pattern Setting  Microprocessor (angle setting)  Power Input (V)  Three-phase 200 
    from S$14,990.00
    Min. 5 days
  13. Daiso SDC-32C1
    Daia Daiso SDC-32C1
    High-speed cutting is possible at right angles to the axis of the reinforcing bar. No grinding is required. The gap on the pressure contact end face has largely cleared the number set to 3 mm or less.
    Input Voltage (V)  AC100  Set Contents  Dedicated tip saw  necessary cutting time (sec.)  18  Trusco Part No.  764-1028  Power Consumption (W)  1010  Width (mm)  470  Length (mm)  160  Cutting Capacity (mm)  D19~32  Height (mm)  175  Power Cable (m)  Rated Current (A)  10.5 
    from S$3,499.00
    Min. 4 days
  14. Ultrasonic Cutter
    Honda Electronics Ultrasonic Cutter
    With a handpiece holder, it is a size that does not bother you in storage. Since the blade vibrates at high speed of 40,000 times per second due to the vibration of ultrasonic waves, it can be cut with less force and the cut surface is clean. Gate cutting and deburring of plastics, small items, p... Read More
    Power adapter  AC100~240V/80VA、OUTPUT:DC12V/3.3A  Cable Length (m)  Handpiece cable: 1.6 (straight)  Operating Temperature Range (℃)  10~35  Oscillation Frequency (kHz)  40  Operating Humidity Range  Humidity 20-70% (but no condensation)  Power Consumption (W)  Up to 40 
    Rating:
    100%
    from S$599.90
    Min. 2 days
  15. Electric saw
    EARTH MAN Electric saw
    Various materials can be cut! Variable speed. Adjust the stroke speed of the blade with the strength of pulling the trigger. With 3 types of blades, you can use it immediately! For cutting wood, plastic and general metals. * To maximize the cutting capacity of this product, it is recommended to u... Read More
    Cutting Capacity, Pipe (mm)  Soft iron pipe: Φ32  Cutting Capacity, Wood (mm)  (Thickness) 55  Mass (kg)  1.6  Current (A)  3.7  Rated Power Consumption (W)  350  Cutting Ability, Plastic (Φmm)  PVC pipe: Φ60, (thickness) 2.5  Frequency (Hz)  50/60  Power Input (V)  AC100  Stroke (mm)  About 18  Rated Time (minutes)  30  Suitable Material  Woodwork, ironwork, resin  Cable Length (m)  Cutting Capacity, Mild Steel Sheet (mm)  2.5  Number of strokes (min-1 [times/min])  0~2200 
    Rating:
    81%
    from S$99.90
    Min. 2 days
  16. Chip Saw Cutting Machine
    EARTH MAN Chip Saw Cutting Machine
    Since it is cut with a tip saw, the cut surface is clean. There are few sparks and cutting scraps, and a quick vise that can quickly fix and remove the cut work piece. Compact body that is convenient to carry. With tip saw 165 x 36P for iron and stainless steel. For cutting angles, channel steel,... Read More
    Cutting capacity (mm) angle  50×50  Tip saw outer diameter (Φmm)  165  Number of Teeth (p)  36  Rotational Speed (min -1 [rpm])  6000  Main Unit Dimensions, Length L x Width W x Height H (mm)  About 370 × 160 × 300  Cutting Capacity, Pipe (mm)  Φ48.6  Power Input (V)  AC100  tip saw thickness (mm)  1.6  Suitable Material  Ironsmith  Mass (kg)  About 4.4  Frequency (Hz)  50/60  Cable Length (m)  About 1.8  Current (A)  Tip saw inner diameter (Φmm)  20  Cutting Capacity (mm), Square Pipe  40×40  Power Consumption (W)  550 
    Rating:
    80%
    from S$149.90
    Min. 2 days
  17. Multi Cutter
    SURE (ISHIZAKI ELECTRIC MFG) Multi Cutter
    Ideal for processing Styrofoam. Expanded applications with the attached attachment. Styrofoam can be processed for straight lines, curved lines, grooving, drilling, etc. The body and handle shape have been redesigned to distribute the weight of the transformer and improve workability. In addition... Read More
    Material  6 nylon  Power Consumption (W)  40  Cutting Wire Temperature (℃)  About 450  Mass of Main Unit (kg)  1.0 (excluding power cord)  Mass (kg)  Power Cable (m)  About 3  Trusco Part No.  332-0073  Rated Voltage (V)  100(50/60Hz)  Dimensions, Width W x Depth D x Height H (mm)  129.5×58×167 
    Rating:
    84%
    from S$199.90
    Min. 2 days
  18. Ultrasonic cutter
    Honda Electronics Ultrasonic cutter
    With a handpiece holder, it is a size that does not bother you in storage. Since the blade vibrates at high speed of 40,000 times per second due to the vibration of ultrasonic waves, it can be cut with less force and the cut surface is clean. Gate cutting and deburring of plastics, small items, p... Read More
    Oscillation Frequency (kHz)  40  Maximum Consumption (VA)  About 25  Cable Length (m)  Handpiece cable: 1.6 (straight)  Operating Humidity Range  Humidity 20-70% (but no condensation)  Operating Temperature Range (℃)  10~35  AC Power Input (V)  100 
    Rating:
    100%
    from S$539.90
    Min. 2 days
  19. Spare blade type electric plane
    EARTH MAN Spare blade type electric plane
    Replacement blade type that does not require polishing. Double-edged type that can be used twice if the orientation is changed. The cutting waste outlet can be switched left and right. With a foot that prevents the plane blade from coming into contact with the work piece. Chamfered with front bas... Read More
    Cutting depth (mm)  1.6 maximum (adjusted at 0.2 intervals)  Rated Time (minutes)  30  Frequency (Hz)  50/60  Current (A)  7.5  Power Consumption (W)  700  Dimension (mm)  82  Voltage (V)  AC100  Rotational Speed (min -1 [rpm])  About 16000  Cable Length (m)  About 2  Mass (kg)  About 3.1  Cutting Width (mm)  About 82  Dimensions, Length L x Width W x Depth D (mm)  Approx. 300 x 166 x 173 
    Rating:
    92%
    from S$95.99
    Min. 2 days
  20. High speed cutting machine
    SHINKO (Shinko MechatroTech) High speed cutting machine
    Cutting metal
    Power Input (V)  100  Current (A)  14.5  Mass (kg)  14.5  Power Consumption (W)  1400  Cable Length (m)  Wheel Thickness (mm)  2.8  Wheel Hole Diameter (Φmm)  25.4  Wheel Outer Diameter (Φmm)  305  Rotation Speed at No Load (min-1[rpm])  3800  Outer Dimensions (mm)  475×285×380  Frequency (Hz)  50/60  Grinding Wheel Peripheral Speed (m/min)  60.6 
    Rating:
    100%
    from S$239.90
    Min. 2 days
  21. High speed cutting machine
    trad High speed cutting machine
    Ideal for cutting angles and lightweight steel frames! A handle that is easy to grip even during continuous cutting work. A one-touch vise that firmly sandwiches the processed material, and can cut at an angle of up to 45 degrees. For cutting angles and lightweight steel frames
    Vise (mm)  (Open) 175  Cable Length (m)  1.8  Rated Power Consumption (W)  1450  Rated Current (A)  15  Rotation Speed at No Load (min-1[rpm])  3200  Maximum Peripheral Speed (m/s)  80  Rated Voltage (V)  AC100 
    Rating:
    80%
    from S$239.90
    Min. 2 days
  22. NiChrome Wire for Styrofoam Cutter
    PROXXON NiChrome Wire for Styrofoam Cutter
    Nichrome wire for desktop styrene cutter replacement. Nichrome wire for styrene cutter replacement.
    Length (m)  30  Wire Diameter Φ(mm)  0.2  Suitable Model  Desktop polystyrene cutter No.27180 
    from S$23.99
    Min. 2 days
  23. Replacement Blade Type Electric Planer Planer Blade 2-Pack
    EARTH MAN Replacement Blade Type Electric Planer Planer Blade 2-Pack
    Double-edged type that can be used twice if the orientation is changed.
    Dimension (mm)  82  Material  High speed steel 
    Rating:
    60%
    from S$11.99
    Min. 2 days
  24. Electric circular saw
    EARTH MAN Electric circular saw
    Newly designed motor adopted High-precision gear pinion shaft greatly improves high output and quietness The flat motor cover makes it easy to replace the motor! Greatly improved bottom and side surface machining accuracy!
    Inclination angle (°)  0~45  Outer Diameter of Saw Blade (Φmm)  147  Inner Diameter of Saw Blade (Φmm)  20  Main Unit Dimensions, Length L x Width W x Height H (mm)  259×202×210  Rated Time (minutes)  30  Maximum Cutting Depth at 45 ° (mm)  31  Maximum Cutting Depth at 90 ° (mm)  48  Frequency (Hz)  50/60  Current (A)  7.5  Rated Power Consumption (W)  705  Power Input (V)  AC100  Mass (kg)  About 2.7  Cable Length (m)  About 5  Suitable Material  For woodworking  Rotational Speed (min -1 [rpm])  No load: about 5000 
    Rating:
    88%
    from S$99.90
    Min. 2 days
  25. Dustproof cutter
    Shindaiwa Dustproof cutter
    A comfortable cutting machine that does not scatter chips. Deck plates and floor steel plates can be cut like circular saws! Easy-to-grip, non-slip soft grip with bright LED light (switch interlocking). Brightly illuminates the cutting direction (marking line). A dust case that is easy to open an... Read More
    Power Consumption (W)  1300  Current (A)  14.0  Blade Outer Diameter (mm)  180  Blade Inner Diameter (mm)  20  Outer Dimensions, Length L x Width W x Height H (mm)  325×272×267  Trusco Part No.  359-7202  Mass (kg)  4.3  Rotation Speed (min-1[rpm])  4300  Cable Length (m)  5.0  Maximum Cutting Depth (mm)  60  Suitable Material  For ironsmith  Included Accessories  Ironsaw saw  Power Input (V)  Single phase 100 
    Rating:
    60%
    from S$599.90
    Min. 2 days
  26. Orbital Jigsaw Dial Type Continuously Variable Speed
    EARTH MAN Orbital Jigsaw Dial Type Continuously Variable Speed
    Suitable for  Blade: B type (thickness 0.9-1.3mm)  Frequency (Hz)  50/60  Inclination angle (°)  Left and right 0-45  Power Input (V)  AC100  Current (A)  5.5  Cable Length (m)  About 2  Cutting Capacity, Aluminum Plate (mm)  About 12  Cutting Capacity, Mild Steel Plate (mm)  About 7  Dimensions (Length L x Width W x Height H) (mm)  220×70×190  Mass (kg)  About 2.1  Power Consumption (W)  500  Stroke (mm)  Width: about 18  Number of strokes (min-1 [times/min])  About 1500-2800  Suitable Material  Woodwork, ironwork, resin 
    Rating:
    76%
    from S$69.99
    Min. 2 days
  27. Tip saw cutting machine
    SHINKO (Shinko MechatroTech) Tip saw cutting machine
    Cuts wood, iron, aluminum, PVC, stainless steel, etc. into almighty. Uses a special stepped multi-material tipped saw (made in Japan). Compact and lightweight type that is convenient to carry. Turntable rotation 45 degrees to 0 degrees to 45 degrees.
    Inclination angle (°)  (Saw blade) 45  Rotation Angle (°)  (Turntable) 45 ~ 0 ~ 45  Power Cable (m)  1.8  Power Input (V)  100  Outer Diameter of Saw Blade (Φmm)  190  Inner Diameter of Saw Blade (Φmm)  20  Rotational Speed (min -1 [rpm])  4.8  Mass (kg)  5.3  Frequency (Hz)  50/60  Current (A)  6.2  Power Consumption (W)  600 
    Rating:
    80%
    from S$229.90
    Min. 2 days
  28. Tabletop circular saw
    SHINKO (Shinko MechatroTech) Tabletop circular saw
    Lightweight and compact design, ideal for light field work. The angle of the table and saw blade can be easily set with one touch. With brake. For cutting skirting boards, picture frames, peripheral edges, and interior materials.
    Rotational Speed (min -1 [rpm])  4500  Inner Diameter of Saw Blade (Φmm)  20  Cable Length (m)  1.8  Saw Blade Size (mm)  (Available) 185-190  Power Input (V)  100  Current (A)  6.2  Power Consumption (W)  600  Number of Teeth (p)  72  Suitable Material  For woodworking  Outer Diameter of Saw Blade (Φmm)  190  Mass (kg)  Frequency (Hz)  50/60 
    Rating:
    90%
    from S$139.90
    Min. 2 days
  29. Double cutter
    YAMASHIN SEIKYO (YAMASHIN) Double cutter
    This one can cut iron, wood, aluminum, and PVC. 2-flute type tipped saw cutting machine equipped with almighty tipped saw Ergonomically designed twin handle that is easy to grip and easy to clean Rollers that are easy to cut into the durable and easy-to-clean aluminum die-cast cover member It is ... Read More
    tip saw thickness (mm)  (A) 1st / 1.6, (B) 2nd / 1.6  Number of Teeth (p)  (A) 1st / 24, (B) 2nd / 24  Blade Outer Diameter (mm)  (A) 1st / 90, (B) 2nd / 90  Tip saw outer diameter (Φmm)  (A) 1st / 90, (B) 2nd / 90  Maximum Cutting Depth (mm)  18~20  Cable Length (m)  Mass (kg)  2.5  Rated Time (minutes)  30  Dimensions, Width W x Depth D x Height H (mm)  300×160×180  Frequency (Hz)  50/60  Rotational Speed (min -1 [rpm])  7500  Maximum Power Consumption (W)  800  Power Input (V)  AC100  Suitable Material  For woodwork, ironwork, aluminum, resin  Included Accessories  Hex wrench, lubricating wax x 10  Replacement Blades  WB-90 
    Rating:
    82%
    from S$269.90
    Min. 2 days
  30. Heat cutter set
    SURE (ISHIZAKI ELECTRIC MFG) Heat cutter set
    Ideal for cutting ropes, etc. Expanded applications with 3 types of attachments. Since the resin rope and various nets are cut by heat, fraying is reduced. The body and handle shape have been redesigned to distribute the weight of the transformer and improve workability. In addition, the drop str... Read More
    Material  6 nylon  Cutting Wire Temperature (℃)  About 500  Power Consumption (W)  40  Mass (kg)  Rated Voltage (V)  100(50/60Hz)  Dimensions, Width W x Depth D x Height H (mm)  129.5×58×167  Mass of Main Unit (kg)  1.0 (excluding power cord)  Trusco Part No.  331-9342  Power Cable (m)  About 3 
    Rating:
    60%
    from S$259.90
    Min. 2 days
  31. PCB Cutter
    HOZAN (HOZAN TOOL INDUSTRIAL) PCB Cutter
    Easily cuts any printed circuit board, from paper phenol, glass epoxy to ceramic
    Power Consumption (W)  80  Outer dimensions, Width W x Height H x Depth D (mm)  250×125×190  Rated Voltage (V)  AC100  Trusco Part No.  497-3569  Mass (kg)  Power Cable (m)  1.8  Rotational Speed (min -1 [rpm])  3500  Frequency (Hz)  50/60  Rated Time (minutes)  15 
    from S$379.90
    Min. 2 days
  32. Electric trimmer (6mm shaft)
    EARTH MAN Electric trimmer (6mm shaft)
    For character processing of nameplates and signboards. For grooving, circular processing, and trimming of wood.
    Power Consumption (W)  400  Frequency (Hz)  50/60  Power Input (V)  100  Rotational Speed (min -1 [rpm])  No load: 30000  Mass (kg)  About 1.25  Collet chuck dimensions (Φmm)  6 dedicated  Cable Length (m)  About 1.9  Current (A)  4.1  Rated Time (minutes)  30 
    Rating:
    100%
    from S$139.90
    Min. 2 days
  33. Electric circular saw
    trad Electric circular saw
    A durable aluminum base with a safety brake motor that is lightweight and has little distortion. Inclined cutting is also possible! Maximum inclination 45 °! Cut straight to a certain width with a T-square! For cutting wood, cutting plywood, etc., for do-it-yourself
    Rated Voltage (V)  100  Rated Time (minutes)  30  Main Unit Dimensions, Width W x Depth D x Height H (mm)  300×225×240  Depth of cut (mm) (at 45 °)  39  Rotational Speed (min -1 [rpm])  4500  Frequency (Hz)  50/60  Depth of cut (mm) (at 90 °)  56  Rated Power Consumption (W)  850  Rated Current (A)  Outer Diameter of Saw Blade (Φmm)  About 165  Cable Length (m)  About 2  Inner Diameter of Saw Blade (Φmm)  About 20  Mass (kg)  About 3.5  Number of Teeth (p)  Circular saw blade / 52  Specification  Double insulation structure 
    Rating:
    88%
    from S$119.90
    Min. 2 days
  34. Compact / Orbital Jigsaw
    BLACK&DECKER Compact / Orbital Jigsaw
    The blade can be easily attached and detached by using a one-touch clamp. Adopts a 4-step orbital mechanism 7% smaller than conventional products, compact design makes work easier Work is reduced with a counterbalance mechanism Parallel ruler, 3 types of blades, with dust collector adapter
    Mass (kg)  About 1.9  Dimensions (H x W x L) (mm)  195×68×220  Cutting Capacity, Aluminum (mm)  15  Conform to  (Blade) T Shank / U Shank  Power Consumption (W)  520  Trusco Part No.  777-1592  Cutting Capacity, Wood (mm)  70  Suitable Material  Ironworker / woodworker / aluminum  Number of strokes (min-1 [times/min])  0~3000  Power Input (V)  AC100(50/60Hz)  Blade  One-touch type  Inclining Angle, Left / Right (°)  45  Stroke length (mm)  19  Cutting capacity (mm) Mild steel 
    Rating:
    100%
    from S$78.99
    Min. 2 days
  35. Desktop Scroll Saw with Speed Control
    EARTH MAN Desktop Scroll Saw with Speed Control
    With stepless speed control Table angle can be tilted up to 45 ° For cutting, cutting out, and curving woodwork, thin iron plates, aluminum plates, brass plates, plastic plates, etc.
    Power Consumption (W)  60  Base Dimensions (mm)  245×405  Current (A)  Power Input (V)  AC100  Body dimensions (H x W x D) (mm)  305×245×625  Stroke (mm)  About 20  Cutting Capacity, Wood (mm)  About 45  Table Tilt Angle (°)  0~45  Table Height (mm)  165  Throat Capacity (mm)  Up to 400  Rated Time (minutes)  30  Cable Length (m)  distance between pins (mm)  About 127  Mass (kg)  13.5  Cutting capacity, Brass Plate (mm)  About 3  Frequency (Hz)  50/60  Specification  Pin end type (Total length: 133mm)  Cutting Capacity, Thin Steel Plate (mm) 
    Rating:
    87%
    from S$269.90
    Min. 2 days
  36. Hand polystyrene cutter HSE
    PROXXON Hand polystyrene cutter HSE
    It is a hand styrol cutter that can freely cut nichrome wire into any shape and unevenness. You can cut Styrofoam into various shapes. It is a hand styrol cutter that can freely cut nichrome wire into any shape and unevenness. The temperature can be adjusted from 100 to 200 degrees. Styrofoam cut.
    Mass (g)  350  Power Supply  AC100V→DC12V・1.0A  Temperature Control Range (℃)  100~200 
    from S$139.90
    Min. 2 days
  37. Band Saw
    HOZAN (HOZAN TOOL INDUSTRIAL) Band Saw
    The table can be tilted up to 45 °. Blade feed speed stepless adjustment type. You can use a household vacuum cleaner for dust collection. Ideal for cutting iron, non-ferrous metals, synthetic resins, wood, etc. * Continuous use beyond the rated time may cause a malfunction of the motor, etc. Ple... Read More
    Power Consumption (W)  100  Power Cable (m)  Table Dimensions (mm)  200×200  Outer dimensions, Width W x Height H x Depth D (mm)  395×490×285  Frequency (Hz)  50/60  Mass (kg)  Rated Voltage (V)  AC100  Included Accessories  K-100-2 spare blade x 1, angle guide  cutting height (mm)  Up to 75 
    Rating:
    80%
    from S$749.90
    Min. 2 days
  38. Universal thread saw
    DREMEL Universal thread saw
    A multi- and compact jigsaw that can be used at home. Can be used with both desktop and handheld types. Lightweight and can be stored compactly. Blade replacement is easy with a lever. Dust suction hose can be attached.
    Stroke width (mm)  Power Input (V)  100(50/60Hz)  Jaw Depth (mm)  250  Mass (kg)  1.1  Cable Length (m)  Cutting Capacity, Wood (mm)  (Wood) 19 / (Balsa) 38  Power Consumption (W)  70  Type  With case  Cutting Capacity, Mild Steel Sheet (mm)  0.8  Number of strokes (min-1 [times/min])  1100~1800 
    Rating:
    100%
    from S$299.90
    Min. 4 days
  39. Chip saw combined cutting machine
    Shindaiwa Chip saw combined cutting machine
    A low-cost tip saw cutter that takes advantage of the features of LA305-C. Supports all cutting work with a grindstone cutting machine. Can be used as both a tip saw and a whetstone. * Since the rotation speed is constant at 3200, stainless steel tipped saws cannot be used (only for ironwork tipp... Read More
    Maximum Cutting Size, Round Bar, 90 ° (Φmm)  115  Maximum Cutting Size, Rectangular Bar, 90 ° (mm)  115×70  Trusco Part No.  116-9564  Power Consumption (W)  1400  Current (A)  15  Mass (kg)  17.5  Blade Inner Diameter (mm)  25.4  Blade Outer Diameter (mm)  308  Rotation Speed (min-1[rpm])  3200  Cable Length (m)  4.0  Outer Dimensions, Length L x Width W x Height H (mm)  565×309×321  maximum cutting size (angle 45 °) (mm)  80×80  Maximum Cutting Size, 90 ° Angle (mm)  90×90  Suitable Material  For ironsmith / resin  Power Input (V)  Single phase 100  Included Accessories  Spanner, spacer, tip saw for ironworker 
    Rating:
    100%
    from S$769.90
    Min. 2 days
  40. Tip saw cutting machine 180mm
    EARTH MAN Tip saw cutting machine 180mm
    Since it is cut with a tip saw, the cut surface is clean and there are few sparks and cutting scraps, so it can be cut speedily. For cutting angles, channel steel, single pipes, etc. * Wood cannot be cut with the attached tipped saw.
    Cable Length (m)  About 2  Power Input (V)  AC100  Cutting Capacity, Pipe (mm)  Φ60  Power Consumption (W)  800  Rated Time (minutes)  About 30  Frequency (Hz)  50/60  Rotational Speed (min -1 [rpm])  About 5000  Mass (kg)  Inner Diameter of Saw Blade (Φmm)  20  Suitable Material  For ironsmith  Current (A)  8.3  Cutting capacity (mm) angle  60×60  Cutting Capacity (mm), Square Pipe  50×50  Main Unit Dimensions, Length L x Width W x Height H (mm)  320×375×383  Outer Diameter of Saw Blade (Φmm)  180 
    Rating:
    35%
    from S$259.90
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 646

Set Ascending Direction