For chamfering, grooving, circular cutting, etc. A clear base where you can see the cutting edge. The transparent base makes it ideal for detailed work. Template guide standard equipment. The cutting depth can be adjusted. Soft start with little recoil at start-up.
Current (A) 3.6 Power Supply AC100V(50/60Hz) Type of Insulation Double insulation Cord 2 core 1.8m Rated Power Consumption 350W Rated Operation Time 15 minutes Bit shank Diameter (Φmm) Φ6
Replacement blade type that does not require polishing. Double-edged type that can be used twice if the orientation is changed. The cutting waste outlet can be switched left and right. With a foot that prevents the plane blade from coming into contact with the work piece. Chamfered with front bas... Read More
Frequency (Hz) 50/60 Current (A) 7.5 Voltage (V) AC100 Power Consumption (W) 700 Rotational Speed (min -1 [rpm]) About 16000 Rated Time (minutes) 30
Handy type (HCT-30A) for sharp engraving with ultra-vibration (12000 times/min, amplitude 1mm). A vibration/rotation dual-use type (HCT-30S) that adds a rotation function (12,000 times/min) to the HCT-30A.
Power Input (V) AC100 50/60Hz Power Consumption (W) 80 Rotational Speed (min -1 [rpm]) 12000 Rated Current (A) 0.8 Vibration Frequency (min-1) 12000 engraving method For both vibration and rotation
Highly efficient peeling is possible without damaging the base due to the minute super vibration with an amplitude of 1 mm and 12000 times / minute. It is a compact body that can handle corners and corners of the peeling surface, or even uneven parts, which is difficult with a large peeling machi... Read More
Mass (g) 800 Power Input (V) AC100 50/60Hz Power Consumption (W) 80 Rated Current (A) 0.8 Vibration Frequency (min-1) 12000 engraving method Vibration only
Continuous and evenly spaced machining between 100 and 205 mm is possible. The domino hole center position can be easily set to 100 to 205 mm from the edge of the material.
Accessories and consumables for FESTOOL Domino DF 500
The number of revolutions can be changed while holding the handle. With a fine adjustment mechanism for the depth of cut. With a double-insulated electronically controlled spindle lock that reduces the scattering of chips. A dust collector can be installed.
For precision cutting of thin plate materials such as wood, aluminum, and resin for 3-disc electric mini routers and flexible shafts. It can be attached to your mini router and used for precision cutting work.
Remove gaskets, rust, paint film, etc. without damaging the base with super vibration. It is a type that can perform both vibration and rotation processing work. By adopting a powerful magnet motor, heavy cutting can be done quietly.
Power Input (V) AC100 50/60Hz Power Consumption (W) 300 Rotational Speed (min -1 [rpm]) 4000 Rated Current (A) 3 Vibration Frequency (min-1) 8000 engraving method Vibration only
You can convert from a traditional plunge router to a fixed base router with the touch of a switch. The rack and pinion type height adjustment allows operation with the push of a button.
For woodworking work such as grooving and trimming
Power Consumption (W) 1350 Rotational Speed (min -1 [rpm]) About 8000-21000
With spindle lock (spindle can be fixed by button operation, and tip tools can be easily attached and detached.) Double insulation (can be used without grounding) Electronic continuously variable transmission function Hitachi Koki dust collector can be attached High power and high cutting handle ... Read More
By accurately controlling the height, depth and angle of the holes for dowel joining, you can drill two holes at 32 mm intervals at the same time with one action.
For drilling work for dowel joining.
Power Consumption (W) 570 Drill Diameter 8mm(2mm) Rotational Speed (min -1 [rpm]) About 14000 Hole depth t (mm) 0～38
With a sturdy cast aluminum base, fence and housing, the Biscuit Joiner is accurate and durable. Make sturdy seams for various furniture and shelves.
For grooving work for joining wood with biscuits.
Power Consumption (W) 600 Rotational Speed (min -1 [rpm]) About 10300 Inner Diameter of Saw Blade (Φmm) 22 Outer Diameter of Saw Blade (Φmm) 100 Angle Adjustment Range Fence: 0-90
600W high power! Adjustable rotation speed! The rotation speed can be adjusted according to the workpiece and bit. Straight bit included! 6mm blade x 2.8mm blade x 1
For wood cutting work such as grooving and decorative surface processing.
Frequency (Hz) 50/60 Current (A) 6.4 Voltage (V) AC100 Rotational Speed (min -1 [rpm]) About 15000-25000 Rated Power Consumption (W) 600 Rated Time (minutes) 30 Collet chuck dimensions (Φmm) 6、8
High-power 710W motor for smooth sharpness Lightweight, compact Parking stand that does not require brakes Easy-to-use dual duct Replacement blade method that does not require adjustment
Power Input (V) 100(50/60Hz) Power Consumption (W) 710 Rotational Speed (min -1 [rpm]) 16500
Cutting, polishing and chamfering work can be done with one unit! Handle 90 ° angle adjustable! Easy to operate! Can be cut in any direction 360 °! Free cutting! The speed change dial can be used to optimally set the rotation speed from 10,000 to 20,000 min-1 (rotation / minute) according to the ... Read More
Power Input (V) 100(50/60Hz) Rotational Speed (min -1 [rpm]) 10000～20000 Mass of Main Unit (g) 1270 Collet diameter (Φmm) 4.8/3.2
RELIEF TrimmerFor chamfering, grooving, circular cutting, etc. A clear base where you can see the cutting edge. The transparent base makes it ideal for detailed work. Template guide standard equipment. The cutting depth can be adjusted. Soft start with little recoil at start-up.Current (A) 3.6 Power Supply AC100V(50/60Hz) Type of Insulation Double insulation Cord 2 core 1.8m Rated Power Consumption 350W Rated Operation Time 15 minutes Bit shank Diameter (Φmm) Φ6from S$139.90Min. 2 days
