Foam Cutters / Hot Knives & Others

With 100V power supply specifications, thick styrene can be cut continuously (thickness: 110mm, depth: 170mm). With a turbo switch, hard styrol can be easily cut. Energizing lamp display to notify of heat generation. By adopting an auto safety switch, heat is generated only while the switch is pr... Read More

It's battery-powered, so you can carry it around and work anywhere. The slender grip that fits your hand is designed to be easy for women and children to use. Energizing lamp display to notify of heat generation. By adopting an auto safety switch, heat is generated only while the switch is pr... Read More

Nichrome wire for desktop styrene cutter replacement. Nichrome wire for styrene cutter replacement.

Ideal for cutting ropes, etc. Expanded applications with 3 types of attachments. Since the resin rope and various nets are cut by heat, fraying is reduced. The body and handle shape have been redesigned to distribute the weight of the transformer and improve workability. In addition, the drop str... Read More

It is a hand styrol cutter that can freely cut nichrome wire into any shape and unevenness. You can cut Styrofoam into various shapes. It is a hand styrol cutter that can freely cut nichrome wire into any shape and unevenness. The temperature can be adjusted from 100 to 200 degrees. Styrofoam cut.

Lightweight design with an emphasis on work efficiency and operability. There is no need to worry about electric shock due to the transformer function of the station (30V or less). Because it is blown by the heater wire, the cut end is clean and fine dust is not generated.

Ideal for modeling, crafting, and cutting out POP characters using Styrofoam. Cutting work using straight line cutting guides and square cutting guides is possible. With temperature control of nichrome wire, you can work with various types of Styrofoam.

Replacement blade for rope cutters.

Nichrome wire exclusively for hand styrol cutter HSE. It can be changed to any shape. Nichrome wire for replacement of hand styrol cutter.

The nichrome wire can be freely deformed and cut into irregularities. only a main part Styrofoam cutting and modeling

Can cut synthetic fiber ropes such as nylon, polyvinyl chloride, vinylon, polyester, polyethylene, polypropylene, urethane, etc. * Odor and smoke may be generated depending on the material to be cut. Ventilate well. * Do not touch the cutter blade or electrode rod directly with your hands or work... Read More

Comes with a hand switch that is convenient for cutting, cutting, and drilling Styrofoam. Since it is battery operated, it can be used anywhere.

Heat wire for EA304YA-11

You can cleanly cut the resin rope. Synthetic fiber ropes with a maximum diameter of Φ40 mm can be cut cleanly. Since it is heat-fused, it can prevent fraying at the same time. It can be used continuously while the power is on, improving work efficiency. Cuttable material: With rope safety device... Read More

*There is a model change for the main body (EA304YB-11), old type: screw type, current type: inset type. This product is obsolete: screw type.

Stylol cutter with 100V power supply specification With turbo switch, it also supports hard styrene

Easy-to-work tabletop type Can be used in three ways: straight cut, handy cut, and circular cut. All parts can be stored on the back of the table, so after storage, the thickness is about 55 mm and it can be stored compactly.

[For EA304PR-1] With nichrome wire holder

A cordless type that can be used with 4 AA batteries. Comes with two types of attachments, a bow type and a rod type. Since the cut surface is smooth, no post-processing such as filing is required. For cutting Styrofoam and pattern cutting

Recommended for curves and fine work. For cutting Styrofoam. * Be careful not to get burned. * If you apply excessive force, the nichrome wire may be cut. * Do not apply excessive force.

It cuts lightly and smoothly. Recommended for large design work. For a wide range of applications from hobbies to work, such as cutting styrofoam, designing for commercials, creating works of art, and developing commercial artwork. * Be careful not to get burned.

Please cut it by yourself according to the instruction manual. For replacement of SC-5AP. * Please note that if you apply excessive force, it may be deformed or cut.

SG-31 option parts

Since the heat is cut with the heater wire, the cut end is cut and fine dust is not generated. In addition to free curves, it is possible to cut straight lines using an attestation gauge and process various shapes by adjusting the angle of the heater. A ruler and angle indication are displayed, a... Read More

Synthetic fiber rope can be cut cleanly. Since it is heat-fused, it is convenient because it can prevent the cut surface from fraying at the same time as cutting. It can be used continuously while the power is on, improving work efficiency. What can be cut: Synthetic fiber rope such as nylon, pol... Read More

Comes with a hand switch that is convenient for cutting, cutting, and drilling Styrofoam. With 3 types of attachments, it can be processed according to the application. It can be used in 10 seconds after turning on the switch.

Ideal for modeling, working, and cutting out POP characters using Styrofoam. The nichrome wire holder can be moved left and right, so diagonal cutting is also possible. The work piece is also slippery, and it is possible to perform straight cutting, angle cutting and cutting work using an aluminu... Read More

Battery-powered styrol cutter that is convenient to carry A slender grip that fits your hand and is designed to be easy for women and children to use

*Short heater unit only.

Heat wire for EA304YA-16

Ideal for hole expansion, screw heads, dial foot cleaning and chamfering