How to Use
Toggle Nav
My Cart
Search
Advanced Search
All Category
All Category
Menu
Account

Shear Wrenches

A shear wrench is an electric tool used to tighten shear bolts. Rather than simply tightening like an impact wrench, it is used for final tightening with a strong torque. There are various materials used for the body, but it is possible to reduce the weight by using high-rigidity aluminum. It is easy to use with a small turn. This tool is useful when you want to use a shear wrench to strongly fix steel frames and bridges in various buildings. There is also one that can support a wide range of shear bolts with a single unit.

Other Related Pages

  1. tone shear wrench
  2. bolt tightening torque
  3. bolt size m20
  4. m16 bolts size
View : Grid List
Filter

31 Item(s)

Set Ascending Direction
  1. M16 / M20 nut rotation angle wrench
    TONE M16 / M20 nut rotation angle wrench
    F8T Hot-dip galvanized nut rotation angle wrench for both high strength M16 and M20. Compatible with 12G hot-dip galvanized high-strength M16. ; Set the rotation angle with the tightening angle setting dial built into the main body. ; Since it automatically stops at the set angle, highly accurate... Read More
    Setting Angle (°)  (Tightening) 90-240  Maximum Power Consumption (W)  1100  Tightening Torque (Nm)  (Common use) 540 
    from S$5,599.00
    Min. 6 days
  2. Shear wrench M16 / M20 / M22 100V
    TONE Shear wrench M16 / M20 / M22 100V
    A double-insulated motor that uses a high-rigidity aluminum body. High durability and high performance due to motor power up. Work time is shortened by tightening torque and speeding up. The weight balance has been optimized and the weight has been reduced. Very convenient for tightening Torcia t... Read More
    Frequency (Hz)  50/60  Power Consumption (W)  1550  Rotational Speed (min -1 [rpm])  19 
    from S$5,399.00
    Min. 3 days
  3. Construction first
    TONE Construction first
    Frequency (Hz)  50-60 
    from S$4,399.00
    Min. 6 days
  4. M20 / M22 nut rotation angle wrench
    TONE M20 / M22 nut rotation angle wrench
    F8T Hot-dip galvanized nut rotation angle wrench for both high strength M20 and M22. Compatible with 12G hot-dip galvanized high-strength M16. ; Set the rotation angle with the tightening angle setting dial built into the main body. ; Since it automatically stops at the set angle, highly accurate... Read More
    Setting Angle (°)  (Tightening) 90-240  Maximum Power Consumption (W)  1100  Tightening Torque (Nm)  (Common use) 735 
    from S$5,999.00
    Min. 6 days
  5. New simple torque converter (GSR type)
    TONE New simple torque converter (GSR type)
    * The torque control range varies depending on the conditions of bolts and nuts and the members to be tightened.
    Frequency (Hz)  50/60  Maximum Power Consumption (W)  1350 
    from S$5,899.00
    Min. 6 days
  6. Shear wrench
    TONE Shear wrench
    With name prevention device Power tool for Torsia type bolt * Socket and cord wire are not included in the body mass.
    Frequency (Hz)  50-60 
    from S$7,499.00
    Min. 6 days
  7. Cordless Shear Wrench
    TONE Cordless Shear Wrench
    Because it is cordless (rechargeable), you can work without worrying about the power cord. The performance is the same as the conventional power cord type, and a lightweight and compact design is realized. Compatible with conventional cord type wrench and socket and can be used in common. Stable ... Read More
    Motor  Brushless DC motor  Battery  36V + multi-bolt type (BSL36B18)  Battery Capacity (Ah)  4 
    from S$3,799.00
    Min. 3 days
  8. TONE Cordless "Kenkata No. 1" (for Torsia bolt, 36V)
    TONE TONE Cordless "Kenkata No. 1" (for Torsia bolt, 36V)
    The lightweight and compact design that makes use of the know-how and experience cultivated in product development has made it cordless without changing its performance. Since it is cordless, you can work without worrying about the power cord. Stable work is possible because it is not easily affe... Read More
    Power Input (V)  36 (multi-volt type storage battery)  Rotation Speed at No Load (min-1[rpm])  102  Tightening Torque (Nm)  120(M16)、180(M20・M22)、250(M24)  Applicable bolt size  High strength (S10T): M16・M20・M22・M24 
    from S$4,699.00
    Min. 3 days
  9. Cordless simple torque converter 400N・m
    TONE Cordless simple torque converter 400N・m
    It is a cordless type that is easy to carry and handle. Due to low noise and low vibration, it can be used for nighttime construction and work in residential areas. Approximately 400 screws can be tightened at 100 N・m with one full charge. Commercially available impact sockets can be used. Suppo... Read More
    Rotation Speed at No Load (min-1[rpm])  8  Tightening Torque (Nm)  400 
    from S$13,990.00
    Min. 3 days
  10. M12 / M14 / M16 nut rotation angle wrench
    TONE M12 / M14 / M16 nut rotation angle wrench
    Nut rotation angle wrench for small diameter hexagon bolts. ; Set the rotation angle with the tightening angle setting dial built into the main body. ; Since it automatically stops at the set angle, highly accurate and uniform angle tightening is possible. * Do not use other than the applicable b... Read More
    Power Input (V)  Single phase 100  Rated Power Consumption (W)  350 (30 minutes)  Setting Angle (°)  (Tightening) 30-240  Tightening Torque (Nm)  (Common use) 200 
    from S$5,999.00
    Min. 6 days
  11. M22 grip rotary shear wrench
    TONE M22 grip rotary shear wrench
    Grip rotary shear wrench for M22. The grip can be fixed at 0 degrees, 90 degrees, 180 degrees, and 270 degrees. It is effective for web tightening work and kachiage work from above the member.
    Frequency (Hz)  50/60  Maximum Power Consumption (W)  1100  Tightening Torque (Nm)  (Common use) 735  Applicable bolt size  For M16, M20, M22 
    from S$5,999.00
    Min. 6 days
  12. M24 shear wrench
    TONE M24 shear wrench
    Shear wrench for M24 that also supports ultra-high strength M24. Improves design and performance by reducing the weight of the conventional type. ; Adopting a double insulation motor ensures electrical safety. High torque of 1250N ・ m, high durability and high performance. Sophisticated design w... Read More
    Maximum Power Consumption (W)  2000  Type of Insulation  Double insulation structure  Tightening Torque (Nm)  (Common use) 1250 
    from S$5,999.00
    Min. 6 days
  13. Shear wrench (M16 / M20 / M22)
    TONE Shear wrench (M16 / M20 / M22)
    Cordless input shear wrench for M22. It is convenient when it is difficult to secure a power supply because it is an electric driver drill input. ; As with normal shear wrench, tightening is completed when the pin tail breaks. No need to check tightening or tightening torque. * Manual input, impa... Read More
    Tightening Torque (Nm)  (Common use) 735  Applicable bolt size  For M16, M20, M22 
    from S$3,899.00
    Min. 6 days
  14. Shear wrench M16 / M20 100V
    TONE Shear wrench M16 / M20 100V
    A double-insulated motor that uses a high-rigidity aluminum body. High durability and high performance due to motor power up. Work time is shortened by tightening torque and speeding up. The weight balance has been optimized and the weight has been reduced. Very convenient for tightening Torcia t... Read More
    Frequency (Hz)  50/60  Power Consumption (W)  1550  Rotational Speed (min -1 [rpm])  26 
    from S$4,399.00
    Min. 3 days
  15. M22 / M24 nut rotation angle wrench
    TONE M22 / M24 nut rotation angle wrench
    F8T Hot-dip galvanized nut rotation angle wrench for both high strength M22 and M24. Compatible with 12G hot-dip galvanized high-strength M20. ; Set the rotation angle with the tightening angle setting dial built into the main body. ; Since it automatically stops at the set angle, highly accurate... Read More
    Setting Angle (°)  (Tightening) 90-240  Maximum Power Consumption (W)  1100  Tightening Torque (Nm)  (Common use) 850 
    from S$7,499.00
    Min. 6 days
  16. New simple torque converter (GST type)
    TONE New simple torque converter (GST type)
    * The torque control range varies depending on the conditions of bolts and nuts and the members to be tightened.
    Frequency (Hz)  50/60 
    from S$5,899.00
    Min. 6 days
  17. Electric shear wrench (grip rotation type)
    TONE Electric shear wrench (grip rotation type)
    Frequency (Hz)  50/60  Power Consumption (W)  1100  Rotational Speed (min -1 [rpm])  23  Tightening Torque (Nm)  540  Applicable bolt size  For M16 / M20 
    from S$5,699.00
    Min. 6 days
  18. M24 extra short shear wrench
    TONE M24 extra short shear wrench
    Tightening wrench for Torcia type high-strength bolts. Ultra-short type ideal for work in narrow spaces.
    Maximum Power Consumption (W)  1500  Tightening Torque (Nm)  1250 
    from S$16,990.00
    Min. 6 days
  19. Cordless simple torque converter 100N・m
    TONE Cordless simple torque converter 100N・m
    It is a cordless type that is easy to carry and handle. Due to low noise and low vibration, it can be used for nighttime construction and work in residential areas. Approximately 400 screws can be tightened at 100 N・m with one full charge. Commercially available impact sockets can be used. Suppo... Read More
    Rotation Speed at No Load (min-1[rpm])  30  Tightening Torque (Nm)  100  Charging Time (minutes)  20 (fast full charge)  torque control range (Nm)  40～200 
    from S$8,999.00
    Min. 3 days
  20. TONE shear wrench M
    TONE TONE shear wrench M
    Dedicated wrench for tightening Torsia type high strength bolts (shear bolts). All M series shear wrenches can be used with common sockets. There is almost no reaction force and you can work safely. Very convenient for tightening high-strength torque bolts in the civil engineering and constructio... Read More
    Power Input (V)  Single phase 100  Rotation Speed at No Load (min-1[rpm])  20  Maximum Power Consumption (W)  1020  Tightening Torque (Nm)  295  Applicable bolt size  M16 
    from S$3,899.00
    Min. 3 days
  21. TONE Cordless Primary Tightening Wrench Construction No. 1 (For Torcia Bolt)
    TONE TONE Cordless Primary Tightening Wrench Construction No. 1 (For Torcia Bolt)
    The lightweight and compact design that makes use of the know-how and experience cultivated in product development has made it cordless without compromising performance. Since it is cordless, you can work without worrying about the power cord. Stable work is possible because it is not easily affe... Read More
    Power Input (V)  36 (multi-volt type storage battery)  Rotation Speed at No Load (min-1[rpm])  29 
    from S$5,899.00
    Min. 3 days
  22. Primary tightening wrench (shear wrench type)
    TONE Primary tightening wrench (shear wrench type)
    A wrench for primary tightening for Torcia type high-strength bolts. With bolt shaft rotation prevention mechanism (nut rotation type); tightening strength / weak can be switched with a switch. * Because of high-speed fastening, the reaction force when stopped will be slightly larger. please note... Read More
    Rotation Speed at No Load (min-1[rpm])  (Strong) 70, (Weak) 60  Maximum Power Consumption (W)  1100  Applicable bolt size  For high strength M22 / M24 
    Discontinued
  23. Wrench for primary tightening with torque adjustment (shear runner type)
    TONE Wrench for primary tightening with torque adjustment (shear runner type)
    A wrench for primary tightening for high-strength hexagon bolts. Supports bridge pre-tightening (60%) of high-strength bolts and primary tightening of 12G hot-dip galvanized high-strength bolts. Any tightening torque can be adjusted in the range of 300 to 500 N ・ m. * Because of high-speed faste... Read More
    Rotation Speed at No Load (min-1[rpm])  26  Maximum Power Consumption (W)  1100  Regular Torque (Nm)  500  Tightening Torque (Nm)  300～500 
    Discontinued
  24. Primary tightening wrench Construction No. 1 for M16 / M20 / M22
    TONE Primary tightening wrench Construction No. 1 for M16 / M20 / M22
    A wrench for primary tightening for Torcia type high-strength bolts. Comes with a bolt shaft rotation prevention mechanism (nut rotation type). M16 tightening and M20 & M22 tightening can be switched with a switch. The controller is built into the main unit. A wrench for primary tightening of... Read More
    Power Input (V)  Single phase 200  Rotation Speed at No Load (min-1[rpm])  (M16)85、(M20・M22)110  Maximum Power Consumption (W)  1100  Applicable bolt size  For high strength M16 / M20 / M22 
    Discontinued
  25. Wrench for primary tightening with torque adjustment (shear runner type)
    TONE Wrench for primary tightening with torque adjustment (shear runner type)
    High-strength hexagon bolt, hot-dip galvanized wrench for primary tightening for high-strength hexagon bolt. ; M20 & M22 tightening and M24 tightening can be switched with a switch. The tightening torque can be finely adjusted with the torque adjustment dial. * Because of high-speed fastening... Read More
    Rotation Speed at No Load (min-1[rpm])  Up to 70  Maximum Power Consumption (W)  1100  Applicable bolt size  For high strength M20 / M22 / M24 
    Discontinued
  26. Primary tightening wrench (shear runner type)
    TONE Primary tightening wrench (shear runner type)
    High-strength hexagon bolt, hot-dip galvanized wrench for primary tightening for high-strength hexagon bolt. ; M16 tightening and M20 & M22 tightening can be switched with a switch. * Because of high-speed fastening, the reaction force when stopped will be slightly larger. please note. ; Tigh... Read More
    Rotation Speed at No Load (min-1[rpm])  (M16)85、(M20・M22)110  Maximum Power Consumption (W)  1100  Applicable bolt size  For high strength M16 / M20 / M22 
    Discontinued
  27. Primary tightening wrench (shear runner type)
    TONE Primary tightening wrench (shear runner type)
    High-strength hexagon bolt, hot-dip galvanized wrench for primary tightening for high-strength hexagon bolt. ; The strength and weakness of tightening can be switched with a switch. * Because of high-speed fastening, the reaction force when stopped will be slightly larger. please note. ; Tighten ... Read More
    Rotation Speed at No Load (min-1[rpm])  (Strong) 70, (Weak) 60  Maximum Power Consumption (W)  1100  Applicable bolt size  For high strength M22 / M24 
    Discontinued
  28. Simple torque converter (STC type)
    TONE Simple torque converter (STC type)
    * The torque control range varies depending on the conditions of bolts and nuts and the members to be tightened. ; Digitorque cannot be installed on this product.
    Frequency (Hz)  50/60  Maximum Power Consumption (W)  1100 
    Discontinued
  29. Wrench for primary tightening with torque adjustment (shear wrench type)
    TONE Wrench for primary tightening with torque adjustment (shear wrench type)
    A wrench for primary tightening for Torcia type high-strength bolts. With bolt shaft rotation prevention mechanism (nut rotation type). ; M20 & M22 tightening and M24 tightening can be switched with a switch. The tightening torque can be finely adjusted with the torque adjustment dial. * Beca... Read More
    Rotation Speed at No Load (min-1[rpm])  Up to 70  Maximum Power Consumption (W)  1100  Applicable bolt size  For high strength M20 / M22 / M24 
    Discontinued
  30. New simple torque converter (GST type)
    TONE New simple torque converter (GST type)
    For small diameter hexagon bolts. ; Low noise and low vibration make it suitable for night work and work in residential areas. * The torque control range varies depending on the conditions of bolts and nuts and the members to be tightened.
    Frequency (Hz)  50/60  Current (A)  2.4  Power Input (V)  Single phase 100  Rotational Speed (min -1 [rpm])  24  Rated Power Consumption (W)  230 (30 minutes)  Tightening Torque (Nm)  70～150 
    Discontinued
  31. Wrench for primary tightening with torque adjustment (shear wrench type)
    TONE Wrench for primary tightening with torque adjustment (shear wrench type)
    Torcia type high-strength bolt & ultra-high-strength bolt wrench for primary tightening. With bolt shaft rotation prevention mechanism (nut rotation type). Supports pre-tightening of high-strength bolts for bridges (60%) and primary tightening of Torcia-type ultra-high-strength bolts. Any tig... Read More
    Rotation Speed at No Load (min-1[rpm])  29  Maximum Power Consumption (W)  1100  Regular Torque (Nm)  500  Tightening Torque (Nm)  300～500 
    Discontinued
View : Grid List
Filter

31 Item(s)

Set Ascending Direction