All Category

Tackers / Nailers / Pile Driver Hammers

A nail driver is a tool for driving nails into a material at high speed. Also called tucker or nail gun. There are various types of power, such as those that use electricity, those that use pneumatic pressure, and manual operations. There are also nails, staples, stakes, etc. to be driven. To use it, press the tip of the nailing machine against the material to be driven and operate the trigger. Because it is a powerful tool, it is always necessary to pay attention to safety such as usage environment and clothes. Also, the nails that can be handled vary in size depending on the nailer, so be sure to choose one that suits your purpose of use.
View : Grid List
Filter

8 Item(s)

Set Ascending Direction
  1. Rapid hammer tacker R11E
    MORIMITSU Rapid hammer tacker R11E
    Staple Length (mm)  8・10  Trusco Part No.  851-1003  Mass (g)  970  Staple Width (mm)  10 
    from S$259.90
    Min. 5 days
  2. Air pile driver
    IKK Air pile driver
    Various piles can be driven with compressed air from a compressor (25 HP or more). It is possible to drive pine pile logs (Φ14 cm x 2 m) and single pipes (Φ48.6). With a mass of 40 kg, it can be carried to the site. It can be used in a wide range of areas such as road construction sites, fences, ... Read More
    Impact strength (J)  (Air 0.54MPa) 1150 / 120kg.m  Suitable for  Compressor / 50HP or more  Main Unit Dimensions, Length L x Width W x Height H (mm)  340×400×790  Included Accessories  Tool set, valve hose 3m  Mass (kg)  120  Air Consumption (m3/min)  Operating Pressure (MPa)  0.68 
    from S$6,499.00
    Min. 6 days
  3. Air pile driver
    IKK Air pile driver
    Various piles can be driven with compressed air from a compressor (25 HP or more). It is possible to drive pine pile logs (Φ14 cm x 2 m) and single pipes (Φ48.6). With a mass of 40 kg, it can be carried to the site. It can be used in a wide range of areas such as road construction sites, fences, ... Read More
    Suitable for  Compressor / 35HP or higher  Operating Pressure (MPa)  0.68  Mass (kg)  80  Air Consumption (m3/min)  3.5  Main Unit Dimensions, Length L x Width W x Height H (mm)  310×360×700  Impact strength (J)  (Air 0.54MPa) 735 / 75kg.m  Included Accessories  Tool set, valve hose 3m 
    from S$4,999.00
    Min. 6 days
  4. Rapid Gun Tucker R34E
    MORIMITSU Rapid Gun Tucker R34E
    Trusco Part No.  851-1002  Staple Width (mm)  10  Staple Length (mm)  8・10・12・14  Mass (g)  870 
    from S$259.90
    Min. 5 days
  5. Air pile driver
    IKK Air pile driver
    Various piles can be driven with compressed air from a compressor (25 HP or more). It is possible to drive pine pile logs (Φ14 cm x 2 m) and single pipes (Φ48.6). With a mass of 40 kg, it can be carried to the site. It can be used in a wide range of areas such as road construction sites, fences, ... Read More
    Mass (kg)  40  Impact strength (J)  (Air 0.54MPa) 313 / 32kg.m  Main Unit Dimensions, Length L x Width W x Height H (mm)  250×260×600  Suitable for  Compressor / 25HP or more  Air Consumption (m3/min)  2.5  Included Accessories  Tool set, valve hose 3m  Operating Pressure (MPa)  0.68  Performance  (Immersion) Matsutake log: Φ14cm × 2 
    from S$3,799.00
    Min. 6 days
  6. Gun cutter
    TACHIKAWA Gun cutter
    Suitable Staple  GT-06ML~GT-13ML  Mass (g)  710  Outer Dimensions, Height H x Width W x Length L (mm)  156×32×160  Number of Loading Staples  150 
    Discontinued
  7. Staple tacker
    TACHIKAWA Staple tacker
    Suitable Air Pressure (MPa)  0.4 to 0.7 (Regulator gauge pressure)  Suitable Hose Inner Dia. (Φmm)  6 or more  Suitable Staple  J-1006~J-1013  Trusco Part No.  851-1022  Outer Dimensions, Height H x Width W x Length L (mm)  147×46×217  Mass (g)  850  Number of Loading Staples  115 
    Discontinued
  8. Electric tucker
    EARTH MAN Electric tucker
    AC100V power supply type that can be used stably at any time Can be used properly according to the application! T-shaped nails where you do not want to stand out, staple safety devices where you want to secure them, and a storage bag that is convenient for storage For fixing work to wood such as ... Read More
    Staple Width (mm)  11.4  Number of Loading Staples  Up to 100  Power Input (V)  AC100  Rated Time (minutes)  10  Frequency (Hz)  50/60  Cable Length (m)  About 2.0  Number of Operations  Up to 1 line / sec  Staple Length (mm)  6/8/10/12/14  Rated Power Consumption (W)  45  Number of Nail Loading  Up to 50  Mass (kg)  About 0.9  Main Unit Dimensions, Length L x Width W x Height H (mm)  About 200 × 55 × 157 
    Rating:
    89%
    Discontinued
View : Grid List
Filter

8 Item(s)

Set Ascending Direction