All Category

Fastening / Drilling (Cordless & Corded Power Tools Accessories)

View : Grid List
Filter

Items 1 - 40 of 1778

Set Ascending Direction
  1. Drill Guide
    wolfcraft Drill Guide
    Accurate drilling work that cannot be done by freehand is possible. Can also drill holes in round bars. Stable with non-slip rubber.
    Size (mm)  (Drill size) 4, 5, 6, 8, 10 
    Rating:
    80%
    from S$55.99
    Min. 2 days
  2. Set of 10 hexagon type drill bits
    BLACK&DECKER Set of 10 hexagon type drill bits
    Rating:
    83%
    from S$11.99
    Min. 2 days
  3. Drill Stand
    STAR-M Drill Stand
    Auxiliary drill chuck type for vertical hole processing, center hole/dowel hole processing, round bar processing, diagonal hole processing, filling wood (wood plug) making, and lock hole processing, for drills with a shaft diameter of 1.5 mm to 10 mm. The maximum stroke when used vertically is 15... Read More
    Drill Diameter  1.5~10  Appropriate number of revolutions (rev / min)  3000 or less  Trusco Part No.  439-1446  Inner Diameter (Φmm)  Base inner diameter: 57  Shaft Diameter  Hex 6.35mm  Width (mm)  Slide bar: 80 
    Rating:
    63%
    from S$99.90
    Min. 2 days
  4. Drill Mate Drill Stand
    Milescraft Drill Mate Drill Stand
    Stable work is possible with a solid grip handle. 4 types of drilling angle settings (with display / 45 degrees, 60 degrees, 75 degrees, 90 degrees)
    Mass (kg)  About 1.82  Dimensions (cm)  35×15×4 
    from S$97.99
    Min. 2 days
  5. Cutting cassette
    Kamekura Seiki Cutting cassette
    Safe and clean cutting without dust, sparks, heat generation and discoloration Deburring is not required for burr-free cutting
    Mass (g)  1300  RoHS directive (corresponding to 10 substances)  Correspondence  Suitable Model  M-40LB  Specification  Set of movable blade and fixed blade 
    from S$699.90
    Min. 6 days
  6. Dedicated Φ6.5mm chuck
    Panasonic Dedicated Φ6.5mm chuck
    Mass (g)  114.5  Dimension D (Φmm)  1~6.5  Trusco Part No.  450-8823  Dimension L (mm)  77 (size up to the stepped part is 11.5)  Type  For one-touch chuck 
    from S$39.99
    Min. 5 days
  7. Drill Chuck Keyless Type
    MonotaRO Drill Chuck Keyless Type
    The keyless type allows easy installation of tip tools. Since it is a drill chuck compatible with the hexagonal shaft of 6.35 mm of the drill driver, it is possible to work with general-purpose drills and grindstones with shafts. For drilling with an electric drill. For polishing with a whetstone... Read More
    Shank Diameter (Φmm)  6.35 
    Rating:
    74%
    from S$12.99
    Min. 2 days
  8. Drill Chuck with Key Type
    MonotaRO Drill Chuck with Key Type
    Since it is a drill chuck compatible with the hexagonal shaft of 6.35 mm of the drill driver, it is possible to work with general-purpose drills and grindstones with shafts. For drilling with an electric drill. For polishing with a whetstone with a shaft. * Please use after confirming the correct... Read More
    Shank Diameter (Φmm)  6.35  Included Accessories  Chuck handle 
    Rating:
    80%
    from S$11.99
    Min. 2 days
  9. Keyless Drill Chuck Compatible to Impact
    ANEX Keyless Drill Chuck Compatible to Impact
    Compatible with impact drivers. A ratchet lock mechanism that prevents the tip tool from coming off or loosening. The release nut solves the problem of biting due to strong tightening. Attached to a charging driver, drilled holes, and polished with a whetstone with a shaft.
    Hex Shank across Flats  6.35 
    Rating:
    84%
    from S$48.99
    Min. 2 days
  10. Drill chuck Keyless impact response
    MonotaRO Drill chuck Keyless impact response
    A drill chuck for drill drivers and impact drivers. For drill drivers and impact drivers. For drilling holes. * Please use after confirming the correct application and the applicable size of the tip tool. * Please wear protective goggles when using. * Check the installation of the drill chuck bef... Read More
    Shank Diameter (Φmm)  6.35  Withstand load N ・ m (kgf ・ m)  70 
    Rating:
    72%
    from S$27.99
    Min. 2 days
  11. Chuck Handle
    Shinwa Rules Chuck Handle
    Handle used to open and close the chuck of an electric drill * Be sure to select the handle that matches the chuck.
    RoHS directive (corresponding to 10 substances)  Correspondence  Material  Iron 
    Rating:
    88%
    from S$2.59
    Min. 2 days
  12. Drill Stopper
    SK (Niigata Seiki) Drill Stopper
    Dedicated size allows reliable installation. Made of heat resistant steel. When drilling a hole with a constant depth with a drilling machine or electric drill. * 6 sizes are included in the set.
    Drill Diameter (Φmm)  3、4、5、6、8、10  Inner Diameter (Φmm)  3、4、5、6、8、10  Outer Diameter (Φmm)  9、10、11、12、14、16  Material  Steel 
    Rating:
    84%
    from S$14.99
    Min. 2 days
  13. Spare shaft for drill chuck
    MonotaRO Spare shaft for drill chuck
    Replacement shaft * Do not use for any other purpose.
    Mass (g)  35  Shank Diameter (Φmm)  6.35  Withstand load N ・ m (kgf ・ m)  70 (maximum replacement axis) 
    Rating:
    73%
    from S$4.19
    Min. 2 days
  14. Impact rubber drill chuck
    ANEX Impact rubber drill chuck
    Supports biting of tip tools Impact support with release nuts Strong hexagonal shank that is resistant to breakage Hand-friendly rubber grip For attachment of drill blade and electric screwdriver
    Material  Nylon elastomer, special alloy steel  Hex Size, Across Flats (mm)  6.35 
    Rating:
    63%
    from S$37.99
    Min. 2 days
  15. Drill Chuck (with Key)
    VESSEL Drill Chuck (with Key)
    Outstanding grasping power and high accuracy. Shaft part with excellent durability. Attach and detach the tip tool with the attached key. For air / electric screwdriver
    Rating:
    85%
    from S$32.99
    Min. 2 days
  16. Attachment riveter
    MonotaRO Attachment riveter
    It becomes a riveter just by attaching it to an electric / rechargeable impact driver. Thick and hard rivet work, which was difficult with conventional hand riveters, can be easily performed. For car repair work, DIY work, and house repair work. * When working, be sure to wear clothes and protect... Read More
    Shank Height (mm)  13  Overall Length (mm)  162  Suitable Rivet Diameter (Φmm)  2.4、3.2、4.0、4.8  Frame Head Diameter (Φmm)  25  Mass (g)  270  Frame Head Height (mm)  37  Maximum Diameter of Handle (Φmm)  58.5  Hex Width Across (mm)  6.35  Usable materials  Aluminum, steel 
    Rating:
    61%
    from S$109.90
    Min. 2 days
  17. Keyless Drill Chuck
    SUNFLAG (SHINKI MFG) Keyless Drill Chuck
    Rating:
    88%
    from S$13.99
    Min. 2 days
  18. Keyless drill chuck
    ANEX Keyless drill chuck
    Compact and lightweight type drill chuck. It can be attached to a charging driver, drilled, and polished with a whetstone with a shaft.
    Mass (g)  104  Hex Size, Across Flats (mm)  6.35 hex axis  Trusco Part No.  469-7685  Overall Length (mm)  70  Chucking Size (mm)  1.5 ~ 6.5 
    Rating:
    84%
    from S$13.99
    Min. 2 days
  19. Drill block Drilling guide
    Milescraft Drill block Drilling guide
    Easy to use and can be drilled straight. The rounded digging corners machined with a trimmer are machined at a right angle of 90 degrees. A chisel blade made of hardened steel. Hit it against the round corners and hit it with a hammer.
    Specification  Drilling guide size: 4/5/6/8/10/12 mm  Mass (g)  About 130  Dimensions (cm)  11.5×4×3 
    Rating:
    78%
    from S$37.99
    Min. 2 days
  20. Replacement Shaft For Drill Chuck
    VESSEL Replacement Shaft For Drill Chuck
    Rating:
    84%
    from S$7.49
    Min. 2 days
  21. LOBSTER Attachment Rivet
    LOBSTER (LOBTEX) LOBSTER Attachment Rivet
    Your impact driver becomes a riveter in no time! Compatible with general hexagonal shaft mounting chucks and easily mounted on power tools. Very easy to install! For car repair work! For DIY work! For house repair work! Easy work on thick and hard rivets, which is difficult with hand riveters! Po... Read More
    Overall Length (mm)  170  Frame Head Diameter (Φmm)  26  Frame Head Height (mm)  35  Mass (g)  450  Maximum Diameter of Handle (Φmm)  55  Hex Width Across (mm)  6.35  Shank Height (mm)  Groove: 13  Suitable Rivet Diameter (Φmm)  Up to 4.8 (all materials) 
    Rating:
    100%
    from S$259.90
    Min. 2 days
  22. Drill Chuck Keyless 13
    VESSEL Drill Chuck Keyless 13
    For air / electric screwdriver
    Rating:
    90%
    from S$49.99
    Min. 2 days
  23. Shank adapter (slide lock type)
    TOP KOGYO Shank adapter (slide lock type)
    It can be attached to an impact wrench and can be used with various 6.35 mm shank sockets and driver bits of various sizes. The types of tip tools that can be used will increase dramatically.
    Dimension d (Φmm)  18 
    Rating:
    89%
    from S$29.99
    Min. 2 days
  24. Collet nut set 1/4 (6.35) for PMR500
    BOSCH Collet nut set 1/4 (6.35) for PMR500
    Suitable for  PMR500 
    Rating:
    98%
    from S$11.99
    Min. 2 days
  25. Drill chuck hybrid type
    MonotaRO Drill chuck hybrid type
    It is a combined type with keyless and key. Since it is a drill chuck compatible with the hexagonal shaft of 6.35 mm of the drill driver, it is possible to work with general-purpose drills and grindstones with shafts. For drilling with an electric drill. For polishing with a whetstone with a shaf... Read More
    Mounting dimensions (mm)  1.5~13  Mass (g)  460  Shank Diameter (Φmm)  6.35  Dimension L2 (mm)  60(±0.5)  Withstand load N ・ m (kgf ・ m)  70 (maximum hexagonal axis)  Included Accessories  Chuck handle  Dimension L1 (mm)  Up to 73  Dimension D2 (mm)  Φ29.5(-0.5)  Dimension D1 (mm)  Φ43(-0.5) 
    Rating:
    76%
    from S$31.99
    Min. 2 days
  26. Chuck Handle
    SK (Niigata Seiki) Chuck Handle
    T-type and L-type handles that are easy to apply force. For tightening electric dollar chucks.
    Material  Steel 
    Rating:
    100%
    from S$5.39
    Min. 2 days
  27. Rotary Socket Adapter
    VESSEL Rotary Socket Adapter
    Swing when pulled, fixed when pushed. Both can be used. High hardness HRC60 with less wear on the corners
    Rating:
    69%
    from S$12.99
    Min. 2 days
  28. Keyless chuck for hammer drill
    AX BRAIN Keyless chuck for hammer drill
    The soft resin does not hurt your hands and prevents rotational heat during use! SDS shank for hammer drills. Durability is improved by the powerful shank! With a lock function that locks at the final tightening position. With a release function that can be released when the tool cannot be removed.
    Shank Diameter (Φmm)  10  Shaft Diameter  10  Dimension B (mm)  114  Maximum Diameter at the Top (mm)  13  Chucking Size (mm)  13  Mass (g)  330  Dimension A (mm)  54  Type  Only for rotation 
    Rating:
    83%
    from S$53.99
    Min. 2 days
  29. Drill bit grinding machine
    VERSOS Drill bit grinding machine
    Rated Time (minutes)  15 or less (5 minute interval)  Rotation Speed at No Load (min-1[rpm])  1600  Polishing size (mm)  3.~16  Input power (W)  40  Power Input (V)  AC100(50/60)  Mass (kg)  About 1.6  Dimensions, Width W x Depth D x Height H (mm)  Approx. 120 × 110 × 165  Color  Black 
    Rating:
    90%
    from S$119.90
    Min. 2 days
  30. Keyless drill chuck (Ratchet lock mechanism)
    TRUSCO Keyless drill chuck (Ratchet lock mechanism)
    Compatible with impact drivers. A ratchet lock mechanism that prevents the tip tool from coming off or loosening. The release nut solves the problem of biting due to strong tightening.
    Rating:
    40%
    from S$54.99
    Min. 2 days
  31. Drill Guide
    trad Drill Guide
    Easy and accurate drilling at any angle with a commercially available electric drill! Easy to drill difficult angles! Set up to 45 ° Drilling fixing base. For 10mm chuck electric drill. * For clockwise rotation only.
    Main Unit Dimensions, Width W x Depth D x Height H (mm)  153×145×340  Drill Diameter (Φmm)  1~10  Maximum Angle range (°)  45  Mass (g)  940  Included Accessories  Dedicated chuck handle 
    Rating:
    77%
    from S$74.99
    Min. 2 days
  32. Universal socket adapter
    VESSEL Universal socket adapter
    You can use it by inserting your existing socket. A chamfer angle that allows smooth attachment and detachment. Compatible with impact drivers.
    Shank (mm)  6.35 
    Rating:
    73%
    from S$35.99
    Min. 2 days
  33. Joint plate (biscuits)
    JOWE Joint plate (biscuits)
    A joint plate for joint processing. Made of beech compression material, it expands with the moisture of the bond and firmly fixes it. Frame fastening. Making furniture boxes.
    Rating:
    97%
    from S$109.90
    Min. 2 days
  34. Keyless Drill Chuck 6.5 Mm
    TRUSCO Keyless Drill Chuck 6.5 Mm
    Simple keyless type. Attached to a charging driver, drilled holes, and polished with a whetstone with a shaft.
    Chucking Size (mm)  1.5~6.5  Trusco Part No.  270-9406  Shaft Diameter  6.35  Overall Length (mm)  70  Mass (g)  95 
    Rating:
    80%
    from S$13.99
    Min. 2 days
  35. Rigid short L adapter
    ANEX Rigid short L adapter
    With ultra-short mug catch that does not drop the screw to the target head width 55 mm (when +2 x 33 mm double-headed bit is attached) Supports double-headed and single-headed bits for electric screwdrivers (total length 33 mm or more) 18V impact compatible Strong course thread Total length up to... Read More
    Overall Length (mm)  134  Mass (g)  250  Head width (mm)  55  Shank Diameter (Φmm)  6.35  Square Drive (mm)  6.35  Trusco Part No.  753-6666  Suitable Model  Electric driver/impact driver up to 18V 
    Rating:
    100%
    from S$59.99
    Min. 2 days
  36. Attachment for electric drill
    ICHIGUCHI Attachment for electric drill
    Please use it when mounting a disc-shaped product to a 6 mm collet chuck type tool.
    Act on Promoting Green Procurement  Conformity  RoHS directive (corresponding to 10 substances)  Correspondence  Suitable Power Tool  Electric drill  Dimension (mm)  Shaft diameter: 6 
    Rating:
    83%
    from S$5.99
    Min. 2 days
  37. Drill Guide DX
    KANZAWA WORKS Drill Guide DX
    The toughness is different from the average body! [K-802] is a 10mm chuck, and [K-802-2] is an aluminum die-cast drill guide with a 13mm chuck. The body is made of lightweight and durable aluminum die-cast. You can make accurate vertical holes. Since the base part has a marking line, it is easy t... Read More
    Shank Diameter (Φmm)  10 (Trimmed round shaft)  Material  Aluminum die casting / steel  Suitable for  Electric drill 
    Rating:
    64%
    from S$199.90
    Min. 2 days
  38. Drill chuck (hybrid)
    VESSEL Drill chuck (hybrid)
    Outstanding grasping power and high accuracy. Shaft part with excellent durability. Dual-purpose type with and without keys.
    Trusco Part No.  371-2745  Set Contents  Drill chuck (hybrid type) key  Mass (g)  314 
    Rating:
    86%
    from S$38.99
    Min. 2 days
  39. Collet Chuck Set (with Chuck Cover)
    PROXXON Collet Chuck Set (with Chuck Cover)
    RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    80%
    from S$19.99
    Min. 2 days
  40. Precision drill
    PROXXON Precision drill
    Drilling holes for iron, non-ferrous metals, etc.
    Shaft Diameter (Φmm)  2.35  RoHS directive (corresponding to 10 substances)  Correspondence  Material  Heiss 
    Rating:
    70%
    from S$22.99
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 1778

Set Ascending Direction