All Category

Drill Chucks

View : Grid List
Filter

Items 1 - 40 of 182

Set Ascending Direction
  1. Dedicated Φ6.5mm chuck
    Panasonic Dedicated Φ6.5mm chuck
    Mass (g)  114.5  Dimension D (Φmm)  1~6.5  Trusco Part No.  450-8823  Dimension L (mm)  77 (size up to the stepped part is 11.5)  Type  For one-touch chuck 
    from S$39.99
    Min. 5 days
  2. Drill Chuck Keyless Type
    MonotaRO Drill Chuck Keyless Type
    The keyless type allows easy installation of tip tools. Since it is a drill chuck compatible with the hexagonal shaft of 6.35 mm of the drill driver, it is possible to work with general-purpose drills and grindstones with shafts. For drilling with an electric drill. For polishing with a whetstone... Read More
    Shank Diameter (Φmm)  6.35 
    Rating:
    73%
    from S$12.99
    Min. 2 days
  3. Drill Chuck with Key Type
    MonotaRO Drill Chuck with Key Type
    Since it is a drill chuck compatible with the hexagonal shaft of 6.35 mm of the drill driver, it is possible to work with general-purpose drills and grindstones with shafts. For drilling with an electric drill. For polishing with a whetstone with a shaft. * Please use after confirming the correct... Read More
    Shank Diameter (Φmm)  6.35  Included Accessories  Chuck handle 
    Rating:
    80%
    from S$11.99
    Min. 2 days
  4. Keyless Drill Chuck Compatible to Impact
    ANEX Keyless Drill Chuck Compatible to Impact
    Compatible with impact drivers. A ratchet lock mechanism that prevents the tip tool from coming off or loosening. The release nut solves the problem of biting due to strong tightening. Attached to a charging driver, drilled holes, and polished with a whetstone with a shaft.
    Hex Shank across Flats  6.35 
    Rating:
    84%
    from S$48.99
    Min. 2 days
  5. Drill chuck Keyless impact response
    MonotaRO Drill chuck Keyless impact response
    A drill chuck for drill drivers and impact drivers. For drill drivers and impact drivers. For drilling holes. * Please use after confirming the correct application and the applicable size of the tip tool. * Please wear protective goggles when using. * Check the installation of the drill chuck bef... Read More
    Shank Diameter (Φmm)  6.35  Withstand load N ・ m (kgf ・ m)  70 
    Rating:
    72%
    from S$27.99
    Min. 2 days
  6. Spare shaft for drill chuck
    MonotaRO Spare shaft for drill chuck
    Replacement shaft * Do not use for any other purpose.
    Mass (g)  35  Shank Diameter (Φmm)  6.35  Withstand load N ・ m (kgf ・ m)  70 (maximum replacement axis) 
    Rating:
    73%
    from S$4.19
    Min. 2 days
  7. Impact rubber drill chuck
    ANEX Impact rubber drill chuck
    Supports biting of tip tools Impact support with release nuts Strong hexagonal shank that is resistant to breakage Hand-friendly rubber grip For attachment of drill blade and electric screwdriver
    Material  Nylon elastomer, special alloy steel  Hex Size, Across Flats (mm)  6.35 
    Rating:
    63%
    from S$37.99
    Min. 2 days
  8. Drill Chuck (with Key)
    VESSEL Drill Chuck (with Key)
    Outstanding grasping power and high accuracy. Shaft part with excellent durability. Attach and detach the tip tool with the attached key. For air / electric screwdriver
    Rating:
    85%
    from S$32.99
    Min. 2 days
  9. Keyless Drill Chuck
    SUNFLAG (SHINKI MFG) Keyless Drill Chuck
    Rating:
    88%
    from S$13.99
    Min. 2 days
  10. Keyless drill chuck
    ANEX Keyless drill chuck
    Compact and lightweight type drill chuck. It can be attached to a charging driver, drilled, and polished with a whetstone with a shaft.
    Mass (g)  104  Hex Size, Across Flats (mm)  6.35 hex axis  Trusco Part No.  469-7685  Overall Length (mm)  70  Chucking Size (mm)  1.5 ~ 6.5 
    Rating:
    84%
    from S$13.99
    Min. 2 days
  11. Replacement Shaft For Drill Chuck
    VESSEL Replacement Shaft For Drill Chuck
    Rating:
    84%
    from S$7.49
    Min. 2 days
  12. Drill Chuck Keyless 13
    VESSEL Drill Chuck Keyless 13
    For air / electric screwdriver
    Rating:
    90%
    from S$49.99
    Min. 2 days
  13. Drill chuck hybrid type
    MonotaRO Drill chuck hybrid type
    It is a combined type with keyless and key. Since it is a drill chuck compatible with the hexagonal shaft of 6.35 mm of the drill driver, it is possible to work with general-purpose drills and grindstones with shafts. For drilling with an electric drill. For polishing with a whetstone with a shaf... Read More
    Mounting dimensions (mm)  1.5~13  Mass (g)  460  Shank Diameter (Φmm)  6.35  Dimension L2 (mm)  60(±0.5)  Withstand load N ・ m (kgf ・ m)  70 (maximum hexagonal axis)  Included Accessories  Chuck handle  Dimension L1 (mm)  Up to 73  Dimension D2 (mm)  Φ29.5(-0.5)  Dimension D1 (mm)  Φ43(-0.5) 
    Rating:
    76%
    from S$31.99
    Min. 2 days
  14. Keyless chuck for hammer drill
    AX BRAIN Keyless chuck for hammer drill
    The soft resin does not hurt your hands and prevents rotational heat during use! SDS shank for hammer drills. Durability is improved by the powerful shank! With a lock function that locks at the final tightening position. With a release function that can be released when the tool cannot be removed.
    Shank Diameter (Φmm)  10  Shaft Diameter  10  Dimension B (mm)  114  Maximum Diameter at the Top (mm)  13  Chucking Size (mm)  13  Mass (g)  330  Dimension A (mm)  54  Type  Only for rotation 
    Rating:
    83%
    from S$53.99
    Min. 2 days
  15. Drill bit grinding machine
    VERSOS Drill bit grinding machine
    Rated Time (minutes)  15 or less (5 minute interval)  Rotation Speed at No Load (min-1[rpm])  1600  Polishing size (mm)  3.~16  Input power (W)  40  Power Input (V)  AC100(50/60)  Mass (kg)  About 1.6  Dimensions, Width W x Depth D x Height H (mm)  Approx. 120 × 110 × 165  Color  Black 
    Rating:
    87%
    from S$119.90
    Min. 2 days
  16. Keyless drill chuck (Ratchet lock mechanism)
    TRUSCO Keyless drill chuck (Ratchet lock mechanism)
    Compatible with impact drivers. A ratchet lock mechanism that prevents the tip tool from coming off or loosening. The release nut solves the problem of biting due to strong tightening.
    Rating:
    40%
    from S$54.99
    Min. 2 days
  17. Keyless Drill Chuck 6.5 Mm
    TRUSCO Keyless Drill Chuck 6.5 Mm
    Simple keyless type. Attached to a charging driver, drilled holes, and polished with a whetstone with a shaft.
    Chucking Size (mm)  1.5~6.5  Trusco Part No.  270-9406  Shaft Diameter  6.35  Overall Length (mm)  70  Mass (g)  95 
    Rating:
    80%
    from S$13.99
    Min. 2 days
  18. Drill chuck (hybrid)
    VESSEL Drill chuck (hybrid)
    Outstanding grasping power and high accuracy. Shaft part with excellent durability. Dual-purpose type with and without keys.
    Trusco Part No.  371-2745  Set Contents  Drill chuck (hybrid type) key  Mass (g)  314 
    Rating:
    86%
    from S$38.99
    Min. 2 days
  19. Drill chuck 13mm
    TRUSCO Drill chuck 13mm
    The use of a tough hexagonal shank drastically reduces the bending of the chuck shaft. Attached to a charging driver, drilled holes, and polished with a whetstone with a shaft.
    Chucking Size (mm)  1.5~13.0  Overall Length (mm)  103  Trusco Part No.  270-9449  Mass (g)  382  Included Accessories  Chuck key  Square Drive (mm)  Hex 6.35 
    Rating:
    80%
    from S$53.99
    Min. 2 days
  20. Drill chuck adapter for battery tools
    BOSCH Drill chuck adapter for battery tools
    You can drill holes with an impact driver. Uses a high-quality chuck and has excellent durability! Prevents bit biting. Reverse screw for fixing the chuck, prevents the chuck from falling off when used in reverse rotation.
    Chucking Size (mm)  1.0~10  Width Across Flats (mm)  6.35  Overall Length (mm)  84 
    Rating:
    80%
    from S$38.99
    Min. 2 days
  21. Keyless drill chuck (hybrid type)
    TRUSCO Keyless drill chuck (hybrid type)
    It is a dual-use type with a keyless specification and a release key. When the drill bites and cannot be removed, it can be removed by impact rotation of the impact driver. You can also use the unlock key. Attached to a charging driver, drilled holes, and polished with a whetstone with a shaft.
    Chucking Size (mm)  1.5~10.0  Overall Length (mm)  100  Trusco Part No.  270-9422  Mass (g)  329  Shaft Diameter  6.35 
    Rating:
    80%
    from S$48.99
    Min. 2 days
  22. Tough hexagon shank
    ANEX Tough hexagon shank
    Shank replacement parts for ANEX drill chuck series. It is tough and hard to break.
    Shaft Diameter  6.35  Hex Width Across (mm)  6.35  Trusco Part No.  803-6959  Screw size  9.52(3/8") 
    Rating:
    100%
    from S$9.99
    Min. 2 days
  23. Drill chuck with key
    SUNFLAG (SHINKI MFG) Drill chuck with key
    If you attach it to a charging screwdriver, you can perform various tasks such as drilling woodwork. Various work is possible with processing of thin metal plates, woodworking, plastic plates, and tip tools with shafts. * Please note that the joint may be damaged when used with a high torque type... Read More
    Bit Shank across Flats (mm)  6.35 
    Rating:
    80%
    from S$29.99
    Min. 2 days
  24. Small diameter drill chuck
    PROXXON Small diameter drill chuck
    Applicable shaft diameter (Φmm)  0.5~3.2  Maximum Rotation Speed (min-1[rpm])  25000  Mounting Screw  M8×0.75 
    Rating:
    100%
    from S$26.99
    Min. 2 days
  25. Chuck adapter
    SUNFLAG (SHINKI MFG) Chuck adapter
    Strong press-fit type JB-13 / CR-13 compatible. Parts for exclusive use of drill chuck.
    Size  1/2×20  Chucking Size (mm)  2.0~13.0  Mass (g)  44  Trusco Part No.  776-8745  RoHS directive (corresponding to 10 substances)  Correspondence  Shaft Diameter  Hex axis 6.35 
    Rating:
    80%
    from S$10.99
    Min. 2 days
  26. SDS13mm hammer chuck
    BOSCH SDS13mm hammer chuck
    For the first time in the world, this chuck is equipped with a round shank vibration drill bit on a hammer drill so that it can be used by rotating and striking. In addition, the striking of the hammer drill body is stopped, and the range of use of bits for ironwork and woodwork is widened just b... Read More
    Gripping Diameter (Φmm)  2.5-13  Suitable for  PBH180RE/PBH160R/N  Trusco Part No.  378-4401  Overall Length (mm)  127  Specification  With chuck handle 
    Rating:
    80%
    from S$129.90
    Min. 2 days
  27. Drill chuck for hammer drill
    SUNFLAG (SHINKI MFG) Drill chuck for hammer drill
    If you attach it to a charging screwdriver, you can perform various tasks such as drilling woodwork.
    Rating:
    100%
    from S$49.99
    Min. 2 days
  28. Drill chuck
    Panasonic Drill chuck
    Dimension D (Φmm)  1~6.5  Trusco Part No.  450-8963  Dimension L (mm)  77 (size up to stepped part is 13)  Suitable for  EZ7410LA1S-B、EZ7410LA1S-R、EZ7410LA1S-A  Type  For one-touch chuck 
    Rating:
    60%
    from S$38.99
    Min. 2 days
  29. Drill chuck for hammer drill
    JEFCOM (DENSAN) Drill chuck for hammer drill
    You can use a straight shank tool with a hammer drill (SDS). Durability is improved by a powerful shank! Cushion grip: Does not hurt your hands when tightening or releasing. Relieves heat during use Lock function: Locks at the final tightening position Release function: Can be released when the t... Read More
    Chucking Size (mm)  1.5~13  Shank Diameter (Φmm)  10  RoHS directive (corresponding to 10 substances)  Correspondence  Specification  Keyless type, rotation only 
    from S$74.99
    Min. 2 days
  30. Keyless drill chuck
    SUNFLAG (SHINKI MFG) Keyless drill chuck
    Securely fixes the tip tool with high-precision holding force. If you attach it to a charging screwdriver, you can perform various tasks such as drilling woodwork. Forward and reverse correspondence. * When using a continuous striking rotation with an impact driver, please note that the shaft may... Read More
    RoHS directive (corresponding to 10 substances)  Correspondence  Type  Soft grip 2 piece type 
    Rating:
    50%
    from S$38.99
    Min. 2 days
  31. Shank for drill chuck
    TRUSCO Shank for drill chuck
    A tough hexagonal shank for drill chucks.
    Mass (g)  32  Trusco Part No.  419-9731  Overall Length (mm)  55  Shaft Diameter  6.35  Hex shaft width across flats (mm)  6.35 
    Rating:
    100%
    from S$12.99
    Min. 2 days
  32. Bit Replacement Rubber Drill Chuck
    ANEX Bit Replacement Rubber Drill Chuck
    Can be replaced even if the shaft is broken. Bit replaceable release nut makes it easy to release biting due to strong tightening. Hand-friendly rubber grip A charging driver can be attached to drill holes and grind with a whetstone with a shaft.
    Shaft Diameter  6.35 
    Rating:
    100%
    from S$48.99
    Min. 2 days
  33. Drill chuck for electric drill
    TOP KOGYO Drill chuck for electric drill
    It can be attached to an electric drill with a single touch using a hexagonal shaft shank. It can be used by attaching straight bits, woodworking drills, short bits, etc. It can be repaired by selling the shank separately.
    from S$34.99
    Min. 2 days
  34. Drill chuck keyless 10
    VESSEL Drill chuck keyless 10
    Various operations such as drilling with a tip tool, polishing with a whetstone with a shaft, and tightening screws with a bit are possible. For air / electric screwdriver
    Rating:
    60%
    from S$49.99
    Min. 2 days
  35. Electric precision drill chuck
    TRUSCO Electric precision drill chuck
    A precision drill chuck that can be attached to a charging driver. A precision drill chuck that is ideal for drilling fine-sized holes and deburring. For drilling holes in the base. For construction work, interior work, and electrical work.
    Performance  (Collet) 0.1-2.5mm, 1.2-3.2mm  Width Across Flats (mm)  (Shaft) 6.35, (Mounting part) 6.35  Mass (g)  43  Overall Length (mm)  65  Trusco Part No.  819-1377 
    Rating:
    95%
    from S$16.99
    Min. 2 days
  36. Drill chuck
    ANEX Drill chuck
    Tough hexagonal shank with outstanding toughness, abrasion resistance, and impact resistance Attached to a charging screwdriver, drilled, and convenient for polishing with a whetstone with a shaft.
    Width Across Flats (mm)  6.35  Shank Shape  Tough hexagon shank  Chuck  With chuck key 
    from S$29.99
    Min. 2 days
  37. Drill chuck 10mm
    TRUSCO Drill chuck 10mm
    The use of a tough hexagonal shank drastically reduces the bending of the chuck shaft. Attached to a charging driver, drilled holes, and polished with a whetstone with a shaft.
    Chucking Size (mm)  1.5~10.0  Mass (g)  202  Trusco Part No.  270-9431  Shaft Diameter  6.35  Overall Length (mm)  90  Included Accessories  Chuck key  Square Drive (mm)  Hex 6.35 
    from S$39.99
    Min. 2 days
  38. Drill chuck for milling machine
    PROXXON Drill chuck for milling machine
    When used as a drilling machine
    Mounting dimensions (mm)  (Drill) 1.0-10  Mounting Screw  1/2 inch -20 screw 
    Rating:
    100%
    from S$59.99
    Min. 2 days
  39. 1 / 2sq. Drill chuck adapter
    Ko-Ken (Yamashita Industrial Lab) 1 / 2sq. Drill chuck adapter
    Square Drive (mm)  1/2"(12.7mm)SQ  Square Drive (mm[inch])  12.7[1/2]  Dimension H (mm)  22  Dimension D (mm)  25  Dimension L (mm)  44  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    20%
    from S$29.99
    Min. 2 days
  40. Drill chuck MT-3
    Mr. Meister Drill chuck MT-3
    It is the same as the drill chuck standard for the precision tabletop milling machine Little Milling 9.
    Gripping Diameter (Φmm)  1.0~13  RoHS directive (corresponding to 10 substances)  Correspondence  Set Contents  Drill chuck / chuck key  Taper  MT-3 
    from S$149.90
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 182

Set Ascending Direction