All Category

Grinding, Polishing & Sanding (Corded)

View : Grid List
Filter

Items 1 - 40 of 533

Set Ascending Direction
  1. 2 pcs Bushing for Diamond Cutter
    TRUSCO 2 pcs Bushing for Diamond Cutter
    A ring that converts Φ20mm for diamond cutters to Φ15mm. For diamond cutters.
    Trusco Part No.  409-7637  Mass (g)  21 
    Rating:
    94%
    from S$4.79
    Min. 2 days
  2. Belt Sander 10
    KANZAWA WORKS Belt Sander 10
    It can be used as a belt sander simply by attaching it to your existing disc grinder with a shaft diameter of M10. Polish freely even in narrow places !! Compact size that easily fits in narrow gaps. One-touch replacement of the belt. For grinding narrow places, deep places, corner curved surface... Read More
    Mass (g)  331  Belt Width W x Length L (mm)  10×330  Included Accessories  Abrasive belt rough, medium, fine 1 each 
    Rating:
    85%
    from S$44.99
    Min. 2 days
  3. Cutting wheel cover for disk grinder
    MonotaRO Cutting wheel cover for disk grinder
    A cover for the cutting wheel of MRO-200DG. * Do not use for anything other than its intended purpose.
    Suitable Model  MRO-200DG 
    Rating:
    83%
    from S$7.69
    Min. 2 days
  4. Adjust Pin Wrench
    TOP KOGYO Adjust Pin Wrench
    For attaching and detaching wheel nuts of disc grinders
    Distance between axes (mm)  10 to 30 (use range)  Pin Diameter (Φmm)  4 (use range) 
    Rating:
    92%
    from S$11.99
    Min. 2 days
  5. Whetstone support washer for disk grinder
    MonotaRO Whetstone support washer for disk grinder
    MRO-200DG grindstone support washer. * Do not use for anything other than its intended purpose.
    Suitable for  For MRO-200DG 
    Rating:
    96%
    from S$3.79
    Min. 2 days
  6. Whetstone holding nut For disk grinder
    MonotaRO Whetstone holding nut For disk grinder
    MRO-200DG grindstone presser nut. * Do not use for anything other than its intended purpose.
    Suitable for  For MRO-200DG 
    Rating:
    99%
    from S$3.19
    Min. 2 days
  7. Velcro base
    REXON Velcro base
    REXON Belt Disc Sander BD460A Magic Tape Base for using magic tape sanding discs.
    Diameter (mm)  150  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    99%
    from S$16.99
    Min. 2 days
  8. Standard lock nut for disc grinder
    TRUSCO Standard lock nut for disc grinder
    Standard lock nut for disc grinders. For fixing grindstones and diamond cutters to disc grinders.
    Outer Diameter (Φmm)  30  Mass (g)  22  Suitable for  Hitachi, Makita, Ryobi, Bosch etc.  Thickness (mm)  Trusco Part No.  409-7602  Thread Diameter (mm)  M10(P1.5) 
    Rating:
    90%
    from S$6.89
    Min. 2 days
  9. Replacement paper Orbital sander Rechargeable 14.4V only
    MonotaRO Replacement paper Orbital sander Rechargeable 14.4V only
    * Do not use for anything other than its intended purpose.
    Dimensions, Height x Width (mm)  140×97  Suitable Model  MSD-144LiX 
    Rating:
    89%
    from S$3.39
    Min. 2 days
  10. Hex Shaft Adapator Conversion Arbor
    RELIEF Hex Shaft Adapator Conversion Arbor
    An arbor set that can be used by attaching your existing disc grinding tip tool to an electric drill. For use with electric drills for tip tools for disc grinders. * Cannot be used with an impact driver.
    Rating:
    88%
    from S$13.99
    Min. 2 days
  11. Wrench For disk grinder
    MonotaRO Wrench For disk grinder
    MRO-200DG wrench. * Do not use for anything other than its intended purpose.
    Suitable for  For MRO-200DG 
    Rating:
    89%
    from S$5.59
    Min. 2 days
  12. Left hand screw (8mm)
    BIG-M (Maruyama Mfg) Left hand screw (8mm)
    Suitable Model  BC303RS/BC263RS/BCS254H/BC263M/BCS303RS 
    Rating:
    95%
    from S$6.49
    Min. 2 days
  13. Whetstone support washer
    MonotaRO Whetstone support washer
    * Do not use for anything other than its intended purpose.
    Suitable for  MRO-100DG 
    Rating:
    84%
    from S$3.79
    Min. 2 days
  14. 125mm conversion cutting cover (for 100mm disc grinder)
    YAMASHIN SEIKYO (YAMASHIN) 125mm conversion cutting cover (for 100mm disc grinder)
    Easily transform your 100mm disc grinder into a 125mm. If you use a 125mm cutting wheel with a hole diameter of 15mm, you do not need an adapter. * Some models, such as products from overseas manufacturers, may not be compatible.
    Suitable Model  100mm disc grinder (hole diameter 15mm)  Type  Cutting cover 
    Rating:
    68%
    from S$26.99
    Min. 2 days
  15. Hole diameter change bush for 20mm
    Power sonic Hole diameter change bush for 20mm
    A bush with a tip saw hole diameter of 20 → 15.9 mm. As a tip saw hole diameter change bush.
    Suitable Model  CS-160S、CS-160PA  Dimension (mm)  Hole diameter changing bush: 20-15.9 
    Rating:
    90%
    from S$7.99
    Min. 2 days
  16. Hurricane (Dust collection adapter for concrete surface grinding)
    Nakaya Hurricane (Dust collection adapter for concrete surface grinding)
    Hurricane NKC-125 achieves an amazing dust collection rate of 97% with the newly developed "sealed flexible structure", and realizes the first universal design in the market for both 4 "and 5" size cups and grinders of each manufacturer. It is an epoch-making product. Wall gri... Read More
    Suitable Size (mm)  100・125 
    Rating:
    80%
    from S$99.90
    Min. 2 days
  17. Inner flange for disc grinder Hitachi type
    TRUSCO Inner flange for disc grinder Hitachi type
    Inner flange for disc grinder. For fixing grindstones and diamond cutters to disc grinders.
    Thickness (mm)  7.1  Mass (g)  17  Suitable for  Hitachi, Ryobi  Outer Diameter (Φmm)  30.8  Trusco Part No.  409-7629 
    Rating:
    100%
    from S$9.49
    Min. 2 days
  18. Wheel Cover for Angle Grinders
    MonotaRO Wheel Cover for Angle Grinders
    MRO-200DG grindstone cover. MRO-200DG grindstone cover * Do not use for any other purpose. The color may change slightly.
    Suitable for  MRO-200DG 
    Rating:
    92%
    from S$5.59
    Min. 2 days
  19. Auxiliary handle For disk grinder
    MonotaRO Auxiliary handle For disk grinder
    It is a handle of MRO-200DG. * Do not use for anything other than its intended purpose.
    Suitable for  For MRO-200DG 
    Rating:
    92%
    from S$3.89
    Min. 2 days
  20. Switch MRO-100DG Parts
    MonotaRO Switch MRO-100DG Parts
    * Do not use for anything other than its intended purpose.
    Suitable Model  MRO-100DG 
    Rating:
    87%
    from S$6.99
    Min. 2 days
  21. Inner flange for disc grinder Makita type
    TRUSCO Inner flange for disc grinder Makita type
    Inner flange for disc grinder. For fixing grindstones and diamond cutters to disc grinders.
    Trusco Part No.  409-7611  Mass (g)  21  Outer Diameter (Φmm)  32.7  Suitable for  Makita, made by Bosch  Thickness (mm) 
    Rating:
    73%
    from S$9.49
    Min. 2 days
  22. Hole diameter change bush 25. For 4mm
    Power sonic Hole diameter change bush 25. For 4mm
    A bush with a tip saw hole diameter of 25.4 → 15.9 mm. As a tip saw hole diameter change bush.
    Dimension (mm)  Hole diameter changing bush: 25.4-15.9  Suitable Model  TBS-255PA 
    Rating:
    100%
    from S$7.99
    Min. 2 days
  23. Magic pat (soft) standard
    SHINANO Magic pat (soft) standard
    Mass (g)  30  Screw size  5/16 inch  Dimension (mm)  75  Trusco Part No.  793-8292  Type  Magic sheet  Remark  Magic specification  Suitable Model  SI-2009・SI-2009H 
    Rating:
    100%
    from S$44.99
    Min. 2 days
  24. Belt Sander 15
    KANZAWA WORKS Belt Sander 15
    It can be used as a belt sander simply by attaching it to your existing disc grinder with a shaft diameter of M10. For grinding narrow spaces and corners that were difficult with a grinder. For finish polishing of wood, metal and plastic, scraping off paint and rust, burrs and chamfering. * Wheel... Read More
    Belt Size Can be Hooked (mm)  15×550 
    Rating:
    75%
    from S$49.99
    Min. 2 days
  25. Adjustment pin wrench (long pin type)
    MITLOY Adjustment pin wrench (long pin type)
    Compatible with each model, just match with the pin hole (no need for screwing) Both body and pin have been heat treated Attaching / detaching the wheel nut / inner flange of the disc grinder
    Distance between axes (mm)  10~30  Mass (g)  140  Dimension L (mm)  185  Dimension T1 (mm)  24  Pin Diameter (Φmm)  Dimension T2 (mm)  Included Accessories  With spanner (12 x 14) 
    Rating:
    100%
    from S$19.99
    Min. 2 days
  26. Adjust pin wrench
    KEIBA Adjust pin wrench
    For attaching / detaching inner flanges and wheel nuts for disc grinders, etc. It can be easily attached and detached by simply turning it according to the pin hole of the inner flange and wheel nut. (No adjustment such as screwing is required) Both the body and pins are heat treated. It can be u... Read More
    Range to Use (mm)  10~30  Dimension D (Φmm)  Trusco Part No.  760-7890  Dimension B (mm)  25  Included Accessories  Spanner (12 x 14): 1  Dimension C (mm)  Dimension A (mm)  185  Mass (g)  130 
    Rating:
    100%
    from S$19.99
    Min. 2 days
  27. For diamond dresser GD-160
    RELIEF For diamond dresser GD-160
    The unevenness for the grinding wheel of the bench grinder can be corrected neatly. Bench grinder specialty
    Abrasive Grain Size  #46 
    from S$19.99
    Min. 2 days
  28. Inversion stand set
    BLACK&DECKER Inversion stand set
    Trusco Part No.  810-9071 
    Rating:
    73%
    from S$29.99
    Min. 2 days
  29. Inner flange
    BEST (Hardware) Inner flange
    Hitachi Koki genuine parts Foil washer for disc grinder 100mm.
    Specification  For Hitachi  Mass (g)  16 
    from S$13.99
    Min. 2 days
  30. Collet nut kit
    DREMEL Collet nut kit
    Trusco Part No.  407-4793 
    Rating:
    80%
    from S$13.99
    Min. 2 days
  31. Collet
    DREMEL Collet
    Rating:
    65%
    from S$6.79
    Min. 2 days
  32. Screw mandrel (for electric nutter)
    LOBSTER (LOBTEX) Screw mandrel (for electric nutter)
    Suitable Model  EN410 
    Rating:
    100%
    from S$34.99
    Min. 2 days
  33. Spanner for disc grinder
    TRUSCO Spanner for disc grinder
    Since it is a double-ended type, one can handle two sizes (12 mm / 14 mm). For disc gliders without a lock function. For mounting / replacement of parts (tip parts).
    Material / Finish  High carbon steel / chrome plating  Mass (g)  53  Size  For 12mm / 14mm  Trusco Part No.  232-5713 
    Rating:
    70%
    from S$5.99
    Min. 2 days
  34. Parts for Joy Robo Pro No.H-027
    Sumflex Parts for Joy Robo Pro No.H-027
    Suitable for  No.H-027 only 
    Rating:
    100%
    from S$14.99
    Min. 2 days
  35. Collet chuck for PMR-165
    PROMOTE Collet chuck for PMR-165
    Rating:
    100%
    from S$3.79
    Min. 2 days
  36. Polished stainless steel pin for magnetic barrel polishing machine
    BISO Polished stainless steel pin for magnetic barrel polishing machine
    A 20-hour polished pin for the barrel.
    Material  SUS304 
    Rating:
    60%
    from S$64.99
    Min. 2 days
  37. Arbor Shaft
    PROXXON Arbor Shaft
    For disc type tools
    Shaft Diameter (Φmm)  2.35  Overall Length (mm)  44  RoHS directive (corresponding to 10 substances)  Correspondence  Material  Iron 
    Rating:
    100%
    from S$9.59
    Min. 2 days
  38. Brush cap
    MonotaRO Brush cap
    It is a carbon brush and a cap for one set (2 pieces). * Do not use for anything other than its intended purpose.
    Suitable for  MRO-100DG 
    Rating:
    30%
    from S$2.09
    Min. 2 days
  39. Presser nut taper for disc grinder
    YANASE Presser nut taper for disc grinder
    Nut when using a disc for a Φ100 disc grinder.
    Recycled paper use mark  Conformity  Act on Promoting Green Procurement  Conformity  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    20%
    from S$5.99
    Min. 2 days
  40. Eraser pat
    Solar Eraser pat
    It is a dedicated pad for Solar HP-GR4000.
    Suitable for  HP-GR4000 
    from S$44.99
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 533

Set Ascending Direction