Woodworking Cutting & Surfacing

Includes miter bar for 3/4 5/8 rails. Includes 1/4 "T-Track Bolts. English instruction manual included.

Stable work is possible by attaching a trimmer. Since it is a simple type, it can be installed only when working in the field or using it, for example. There are two dovetail grooves (length 90 mm) for fixing the clamp on the back side. "For trimmers other than Bush and Ryobi, you need to ma... Read More

Ideal for wood decoration. Easy adjustment. For chamfering and decoration. * Please use a commercially available trimmer bit.

Yasuki Steel Aogami No. 1 is used, and it can be used by sharpening the handle. Wood carving.

If you use a dovetail jig, you can easily perform ant assembly processing with 1/2 inch (12.7 mm) intervals. Includes aluminum template for 1/2 (12.7mm) dovetail and bit for dovetail (with 6mm shaft bearing). Router-/ Domestic manufacturer-trimmer-usable (6mm axis) trimmer-can be processed cleanl... Read More

Table saw height / router-bit height / router Convenient for measuring table fences. Since it has a magnet, it can be fixed to the table top with a magnet for stable measurement. It can also be used as a tray for placing pencils and writing tools. With Japanese instruction manual.

Multi-functional push block. For ripping and routing. The ergonomically designed comfort grip handle provides excellent stability and superlative grip. Protect your fingertips from cutting tools. The diamond grip rubber is used on the bottom to prevent scratches on the stock while demonstrating m... Read More

Easy to use and can be drilled straight. The rounded digging corners machined with a trimmer are machined at a right angle of 90 degrees. A chisel blade made of hardened steel. Hit it against the round corners and hit it with a hammer.

Ideal for dowels, mortises and router finishes. Since the sub-base surface is wide, stable work is possible. It can be used for trimmers from manufacturers such as Makita, Hitachi, RYOBI, and Bosch.

Yasuki Steel Aogami No. 1 is used. You can use it by grinding up to the pattern book. (FR2221, HSSC is high-speed steel) Wood carving * HHD-10 has a blade width of up to 12 mm, and KHD-2 has a blade width of up to 10 mm.

Yasuki Steel Aogami No. 1 is used. You can use it by grinding up to the pattern book. (FR2221, HSSC is high-speed steel) Wood carving, wood carving, painting / adhesive peeling * HHD-10 has a blade width of up to 12 mm, and KHD-2 has a blade width of up to 10 mm.

Yasuki Steel Aogami No. 1 is used. You can use it by grinding up to the pattern book. (FR2221, HSSC is high-speed steel) Wood carving * HHD-10 has a blade width of up to 12 mm, and KHD-2 has a blade width of up to 10 mm.

Yasuki Steel Aogami No. 1 is used. You can use it by grinding up to the pattern book. (FR2221, HSSC is high-speed steel) Wood carving * HHD-10 has a blade width of up to 12 mm, and KHD-2 has a blade width of up to 10 mm.

Yasuki Steel Aogami No. 1 is used. You can use it by grinding up to the pattern book. (FR2221, HSSC is high-speed steel) Wood carving * HHD-10 has a blade width of up to 12 mm, and KHD-2 has a blade width of up to 10 mm.

Yasuki Steel Aogami No. 1 is used. You can use it by grinding up to the pattern book. (FR2221, HSSC is high-speed steel) Wood carving * HHD-10 has a blade width of up to 12 mm, and KHD-2 has a blade width of up to 10 mm.

Yasuki Steel Aogami No. 1 is used. You can use it by grinding up to the pattern book. (FR2221, HSSC is high-speed steel) Wood carving * HHD-10 has a blade width of up to 12 mm, and KHD-2 has a blade width of up to 10 mm.

Yasuki Steel Aogami No. 1 is used. You can use it by grinding up to the pattern book. (FR2221, HSSC is high-speed steel) Wood carving * HHD-10 has a blade width of up to 12 mm, and KHD-2 has a blade width of up to 10 mm.

Yasuki Steel Aogami No. 1 is used. You can use it by grinding up to the pattern book. (FR2221, HSSC is high-speed steel) Wood carving * HHD-10 has a blade width of up to 12 mm, and KHD-2 has a blade width of up to 10 mm.

It is a part of the handle used for sharpening and hand-carving the blade (common blade) of the wood carving machine made by the manufacturer. It can also be used as a replacement blade type chisel by attaching a common replacement blade width of 3 mm to 21 mm (28 types) of the manufacturer's... Read More

A spare blade for carving professionals Replacement blade.

Yasuki Steel Aogami No. 1 is used. You can use it by grinding up to the pattern book. (FR2221, HSSC is high-speed steel) Wood carving * HHD-10 has a blade width of up to 12 mm, and KHD-2 has a blade width of up to 10 mm.

A wood carving knife exclusively for Joy Robo and stroke heads.

Yasuki Steel Aogami No. 1 is used. You can use it by grinding up to the pattern book. (FR2221, HSSC is high-speed steel) Wood carving * HHD-10 has a blade width of up to 12 mm, and KHD-2 has a blade width of up to 10 mm.

Yasuki Steel Aogami No. 1 is used. You can use it by grinding up to the pattern book. (FR2221, HSSC is high-speed steel) Wood carving * HHD-10 has a blade width of up to 12 mm, and KHD-2 has a blade width of up to 10 mm.

Prevent kickback.

Yasuki Steel Aogami No. 1 is used. You can use it by grinding up to the pattern book. (FR2221, HSSC is high-speed steel) Wood carving * HHD-10 has a blade width of up to 12 mm, and KHD-2 has a blade width of up to 10 mm.

You can cut out a circle with a diameter of 38 to 305 mm using your existing router. 330mm offset base for extra stability when processing edges. Easy-to-grip, oversized handle knobs give you superior control of your router.

Includes miter bar for 3/4 5/8 rails. Includes 2 1/4 "T-Track Bolts. Includes English instruction manual.

Equipment can be attached to the work table by the clamp method

Yasuki Steel Aogami No. 1 is used. You can use it by grinding up to the pattern book. (FR2221, HSSC is high-speed steel) Wood carving * HHD-10 has a blade width of up to 12 mm, and KHD-2 has a blade width of up to 10 mm.

Yasuki Steel Aogami No. 1 is used. You can use it by grinding up to the pattern book. (FR2221, HSSC is high-speed steel) Wood carving * HHD-10 has a blade width of up to 12 mm, and KHD-2 has a blade width of up to 10 mm.

It is a transmission tool. Carves wood by converting the rotation of an electric drill or motor into vibration.

Yasuki Steel Aogami No. 1 is used. You can use it by grinding up to the pattern book. (FR2221, HSSC is high-speed steel) Wood carving * HHD-10 has a blade width of up to 12 mm, and KHD-2 has a blade width of up to 10 mm.