All Category

Controllers

View : Grid List
Filter

Items 1 - 40 of 51

Set Ascending Direction
  1. speed controller
    IWOOD speed controller
    Since the conventional speed controller squeezes the electric power to reduce the rotation speed, it was impossible to put it into practical use at low speeds due to a decrease in power. There is work. Therefore, it can be used even at several revolutions per second. For power tools with carbon b... Read More
    Rated Voltage (V)  Single phase AC100  Rated Frequency (Hz)  50/60  Maximum Load Current (A)  15  Ambient Temperature (℃)  Up to 40 
    Rating:
    83%
    from S$89.99
    Min. 2 days
  2. speed controller
    RELIEF speed controller
    It can be used to control the rotation of constant speed power tools. Since it is a dial type, you can freely set the rotation speed. It can also be used for temperature control of electric heaters and dimming of incandescent bulbs. With belt clip For rotation control of constant speed power tool... Read More
    Operating Temperature Range (℃)  0~40  Fuse Capacity (A)  15  Output Current (A)  15  Frequency (Hz)  50/60  Power Input (V)  AC100  Number of Phases  Single-phase 
    Rating:
    72%
    from S$89.99
    Min. 2 days
  3. Speed Controller
    KANZAWA WORKS Speed Controller
    Decelerates the rotation speed of electric tools freely and maintains 100% horsepower (torque). Can be used for various power tools such as electric drills, electric circular saws, and routers (motor with carbon brush "single-phase series commutator motor"). The most suitable rotation s... Read More
    Fuse  Glass tube fuse  Maximum Load (W)  1500  Voltage (V)  100  Continuous Operating Time (minutes)  30  Rotational speed (%)  0~70  Current (A)  15 
    Rating:
    78%
    from S$119.90
    Min. 2 days
  4. speed controller
    KANZAWA WORKS speed controller
    The rotational speed of the power tool can be controlled. It is a high-performance type speed controller with convenient functions. It can be used for various electric tools (motors with carbon brushes) such as electric drills, electric circular saws, disc sanders, and routers. Since it can be co... Read More
    Maximum Load (W)  1500  Rotation Speed  0-80% 100% when directly connected  Fuse  breaker  Voltage (V)  100  Current (A)  15 
    from S$199.90
    Min. 2 days
  5. Speed control
    SK (Niigata Seiki) Speed control
    Rated Voltage (V)  AC100(50/60Hz)  Operating Temperature Range (℃)  0~45  Type of Control  Triac phase control  Number of Phases  Single-phase 
    from S$239.90
    Min. 2 days
  6. speed controller
    SUNWAY speed controller
    Fine adjustment is possible smoothly from low speed to full speed. There is no slow knocking. It is a breaker type and does not require fuse replacement. Speed adjustment from 0 to 100% (stop to full speed). Rotational torque that does not easily fall off. Compatible with condenser motors. Contro... Read More
    Maximum Load (W)  1500  Voltage  AC100V  Maximum Load Current (A)  15  Frequency (Hz)  50/60  Cable Length (m)  About 2  Mass (g)  430 (including code)  Dimensions (Length L x Width W x Height H) (mm)  145×61×60 
    Rating:
    50%
    from S$119.90
    Min. 2 days
  7. EMAX Evolution foot controller
    NAKANISHI (NSK) EMAX Evolution foot controller
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$139.90
    Min. 10 days
  8. Power controller
    URAWA Kogyo Power controller
    Connect the motor handpiece and switch ON / OFF for a gentle start. Comes with a feedback circuit that does not reduce torque in any rotation range. Safety measures such as overwork, abnormal current, and transformer overheating are taken. Various motor handpieces manufactured by Urawa Technical ... Read More
    Output Voltage (V)  DC3~30  Cable Length (m)  Input Voltage (V)  AC100(50/60Hz) 
    from S$479.90
    Min. 3 days
  9. G7 controller
    URAWA Kogyo G7 controller
    Connect the motor handpiece and switch ON / OFF for a gentle start. Comes with a feedback circuit that does not reduce torque in any rotation range. Safety measures such as overwork, abnormal current, and transformer overheating are taken. Various motor handpieces manufactured by Urawa Technical ... Read More
    Trusco Part No.  430-5728  Cable Length (m)  Output Voltage (V)  DC3~30  Input Voltage (V)  AC100(50/60Hz)  Rated Input (VA)  30  Mass (kg)  2.3  Output Terminal  2-pole 
    from S$599.90
    Min. 32 days
  10. Pistol Grip VPG-L
    VESSEL Pistol Grip VPG-L
    Suitable Model  VE-5000、VE-5000P、VE-6000P  Trusco Part No.  798-5452  Material  Polycarbonate  Mass (g)  113 
    from S$29.99
    Min. 3 days
  11. Dedicated controller
    Kilews Dedicated controller
    Function  1 unit, HI / LO switching  Outer Dimensions (mm)  165×80×55  Secondary Output  24V/32V Max.1.8A  Mass (g)  460  Input power (V)  AC100~240  Suitable Model  All models of HFB-BE200, HFB-BE512 / 519  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$199.90
    Min. 7 days
  12. speed controller
    TRUSCO speed controller
    A speed controller with flow rate adjustment for small actuators. It can be used as meter-in / meter-out.
    Operating Pressure  0~1MPa  2018 Trusco page  3 0090  Fluid Temperature (℃)  5~60  Suitable Fluid  Air 
    from S$23.99
    Min. 3 days
  13. Torque meter
    VESSEL Torque meter
    Ideal for torque check and management of electric screwdrivers. With two measurement modes (peak hold / peak down hold), it is possible to check the accuracy of the torque driver used for return torque measurement. (Drive 9.5sq. (3/8)) The maximum, minimum, and average values can be obtained by m... Read More
    Mass (kg)  Dimensions, Width W x Depth D x Height H (mm)  160×55×125  Square Drive (mm)  9.5(3/8)  Data Output  ASCII format (baud rate 19200bps)  Continuous Operating Time (hours)  About 12  Recharging Time (hours)  About 3  Applicable Standard  CE、RoHS  Data Memory  Measured value 800 data  Power Supply  NiCad battery 6V cell (700mAh)  Automatic Power Off  Power off after standing for 10 minutes  Dimension (mm)  [Socket mating part] 20 x 20 / 9.5 x 9.5 
    from S$2,299.00
    Min. 182 days
  14. Dedicated controller
    Kilews Dedicated controller
    Free voltage of 100-241V. Since the main body is small and lightweight, it can be hung without taking up space. Controller for HFB-500 series
    Outer Dimensions (mm)  145×60×35  Mass (g)  250  Input Power  AC 100-240V 50/60Hz  RoHS directive (corresponding to 10 substances)  Correspondence  Secondary Output  DC 20/32V  Specification  Hi / Low 2-stage switching 
    from S$179.90
    Min. 7 days
  15. Foot switch (for mini eight)
    Leutor (NIHON SEIMITSU KIKAI KOSAKU) Foot switch (for mini eight)
    A foot switch that can be used by inserting it into the foot controller connector of the power unit (LEC-900). (ON-OFF)
    Suitable Model  LEC-900  Mass (g)  200 
    from S$169.90
    Min. 6 days
  16. Dedicated controller
    Kilews Dedicated controller
    Free voltage of 100-240V. Since the main body is small and lightweight, it can be hung without taking up space. The rotation speed can be switched between HI / LO. Dedicated controller for HFD-2000 and HFD-5000
    Outer Dimensions (mm)  145×60×35  Mass (g)  250  Input Power  AC 100-240V 50/60Hz  RoHS directive (corresponding to 10 substances)  Correspondence  Secondary Output  DC 20/32V  Specification  Hi / Low 2-stage switching 
    from S$129.90
    Min. 7 days
  17. Mini Eight Foot Controller
    Leutor (NIHON SEIMITSU KIKAI KOSAKU) Mini Eight Foot Controller
    Suitable Model  LEC-900 
    from S$169.90
    Min. 4 days
  18. controller
    Kilews controller
    RoHS directive (corresponding to 10 substances)  Correspondence  Suitable Model  HFB-500 series 
    from S$179.90
    Min. 7 days
  19. VE electric extension cord (2m)
    VESSEL VE electric extension cord (2m)
    Overall Length (mm)  2000  Trusco Part No.  798-5444  Mass (g)  120 
    from S$65.99
    Min. 3 days
  20. Euro-style variable foot controller
    SUZUHO Euro-style variable foot controller
    from S$149.90
    Min. 8 days
  21. Speed controller 3
    YANASE Speed controller 3
    The rotation speed of the power tool is controlled steplessly. A pocket type with a leather belt that doubles as a case. 1000W
    Size (mm)  60×45×85  Recycled paper use mark  Conformity  Act on Promoting Green Procurement  Conformity  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$329.90
    Min. 17 days
  22. Fuse for speed controller
    RELIEF Fuse for speed controller
    from S$2.29
    Min. 4 days
  23. Electromagnetic chuck controller
    GiGA SELECTION Electromagnetic chuck controller
    Precisely control the magnetic force of the electromagnetic chuck and display the voltage with an LED light. With demagnetization function (demagnetization time: 6 to 15 seconds) It rectifies the input from alternating current to direct current and outputs it to the electromagnetic chuck.
    Output Voltage (V)  DC0-120  Power Input (V)  Single phase AC200 
    from S$3,999.00
    Min. 5 days
  24. controller
    GiGA SELECTION controller
    Precisely control the magnetic force of the electromagnetic chuck and display the voltage with an LED light. With demagnetization function (demagnetization time: 6 to 15 seconds) It rectifies the input from alternating current to direct current and outputs it to the electromagnetic chuck.
    from S$1,999.00
    Min. 5 days
  25. LHB foot switch
    Leutor (NIHON SEIMITSU KIKAI KOSAKU) LHB foot switch
    Foot switch for hybrid lutor LHB-12. Use this when you want to turn the rotation on and off at your feet.
    Mass (g)  177  Outer Dimensions, Width W x Depth D x Height H (mm)  70×110×30  Suitable Model  LHB-12 
    from S$65.99
    Min. 6 days
  26. Torque adapter
    VESSEL Torque adapter
    It is a "coil spring compression type measurement joint" for digital torque meters (VTM series) used when checking the torque of an electric screwdriver. * Replace after using about 2500 times. * Replace if there is an abnormality such as wear of the hexagonal part or unstable measured ... Read More
    Length (mm)  20  Width (mm)  20  Material  Iron 
    from S$69.99
    Min. 3 days
  27. Dedicated controller
    Kilews Dedicated controller
    from S$559.90
    Min. 7 days
  28. Electric screwdriver analyzer
    KANON (Nakamura Nfg.) Electric screwdriver analyzer
    Various inspections are possible with three types of measurement modes. The continuous use time is about 12 hours. * For products with calibration documents and traceability system diagrams, we can only accept orders on the web. * Products with proofreading cannot be canceled after ordering. * Pr... Read More
    Measurement range (N.m)  0.150~10.0  Minimum Display Value  1.0cN・m  Mass (kg)  1.8  Dimensions, Width W x Depth D x Height H (mm)  230×123×65  Trusco Part No.  250-3034  Recharging Time (hours)  About 3  RoHS directive (corresponding to 10 substances)  Correspondence  Data Output  USB output / Digimatic output 
    from S$1,799.00
    Min. 5 days
  29. Controller for torque type electric screwdriver
    Kilews Controller for torque type electric screwdriver
    Mass (g)  1800  Outer Dimensions (mm)  213×131×65  Secondary Output  40V Max5.5A  Input power (V)  AC100~240  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$659.90
    Min. 7 days
  30. Foot controller
    Leutor (NIHON SEIMITSU KIKAI KOSAKU) Foot controller
    Foot controller for Almighty Leutor AM3.
    Mass (g)  220  Outer Dimensions, Width W x Depth D x Height H (mm)  110×170×65  Cable Length (m)  1.9  Suitable Model  AM3 
    from S$119.90
    Min. 6 days
  31. Eco Grande Controller
    Argofile Japan Eco Grande Controller
    The GEC210 is equipped with a large transformer and is suitable for any work. Since it is equipped with two poles, one for brushes and one for brushless, it can be used with old brush motors. * 1. Since the number of rotations is displayed digitally, you can check the number of rotations. * 1 Som... Read More
    Rated Input (VA)  100  Mass (kg)  2.4  Dimension (mm)  90×205×182  Input Voltage (V)  AC100(50/60Hz)  Set Contents  Eco Grande Controller GEC210 
    from S$749.90
    Min. 6 days
  32. Speed controller 4
    YANASE Speed controller 4
    The rotation speed of the power tool is controlled steplessly. Economy type. With belt hook. 1500W
    Size (mm)  70×135×45  Act on Promoting Green Procurement  Conformity  Recycled paper use mark  Conformity  RoHS directive (corresponding to 10 substances)  Correspondence 
    Discontinued
  33. Speed controller 2
    YANASE Speed controller 2
    The rotation speed of the power tool is controlled steplessly. It supports up to high power 20A. 2000W
    Size (mm)  130×110×80 
    Discontinued
  34. Curl code
    Argofile Japan Curl code
    Discontinued
  35. Mobile controller
    Argofile Japan Mobile controller
    It is a highly portable mobile engine that can be used continuously for 140 minutes with a large capacity battery after being fully charged for 3 hours. Of course, it is directly connected to AC and can be used stably even during charging. The battery uses nickel-metal hydride, which is environme... Read More
    Rated Input (VA)  100  Continuous Operating Time (minutes)  140  Mass (g)  268  Recharging Time (hours)  3 (Full charge)  Dimensions, Width W x Depth D x Height H (mm)  73×170×34  Input Voltage (V)  AC100(50/60Hz)  Set Contents  Mobile controller MPC20-W  Rechargeable Battery Type  Ni-Mh 
    Discontinued
  36. Astro-E decelerator
    NAKANISHI (NSK) Astro-E decelerator
    Discontinued
  37. DP2250R parts
    REXON DP2250R parts
    Discontinued
  38. Selector unit
    NAKANISHI (NSK) Selector unit
    Discontinued
  39. Specification for transformer speed control for electric screwdriver (for 2KD / 5KD)
    KANON (Nakamura Nfg.) Specification for transformer speed control for electric screwdriver (for 2KD / 5KD)
    It is a power supply machine exclusively for the KD series of electric screwdrivers. You can control the speed of Canon 2KD series and 5KD series electric screwdrivers steplessly.
    Output Voltage (V)  Secondary / (Hi) DC32, (Lo) DC24  Mass (kg)  2.5  Dimensions, Width W x Depth D x Height H (mm)  118×210×85  Suitable Screwdriver  2KD series, 5KD series  primary input power supply  AC100V 50/60Hz  Trusco Part No.  250-3158 
    Discontinued
  40. Controller for starlight white
    Argofile Japan Controller for starlight white
    We have achieved this price by reducing costs without compromising! A control power supply with high capacity, easy to use and offered at a special price. You can do full-scale work even if it is cheap.
    Rated Input (VA)  100  Dimensions, Width W x Depth D x Height H (mm)  112×147×78  Mass (g)  1140  Input Voltage (V)  AC100(50/60Hz) 
    Discontinued
View : Grid List
Filter

Items 1 - 40 of 51

Set Ascending Direction